Evaluation Path for Direct Reports only

Hi
We have written an evaluation path to return direct reports for a given manager (to use in an Adobe Interactive form). We get the correct employees returned, but also the manger himself. Ideally we want a list of names that doesn't include him.
Here's our path:
No      Obj      A/B     Rel     Rel name         Priority      Rel Obj Type    Skip
10       US       B       008     Holder                 *                   S
20       P         B       008     Holder                 *                   S
30       S         A       012     Manages             *                   O
40       O         B       003     Incorporates        *                   S
50       S         A       008     Holder                 *                   P
What change should we make to not include the manager in the returned set?
Thanks
Trish

Hello,
Sorry but you can't.
SAP considers that Manager is not assigned to his own org unit (A012 not equal to A008).
I had the same issue and i had to create 2 evaluations path :
- one to get the list of employee (manager include)
- one to get the manager only
and exclude the second one in the report.
Edited by: Cédric LEFRANCOIS on Dec 21, 2009 11:47 AM

Similar Messages

Help to evaluation path for ESS

Hi
I have to make a report/list in the portal, where an employee can see i.e. the birthday of all the colleagues directly under the employees manager.
Is there a standard evaluation path for this ? Or can someone point me in the right direction (and remember I am new to evaluation paths)
Thanks
/Jakob

Hi Siddharth
Thank you for your reply.
I have created the evaluation path as you described, but when I test it using PPSS, with the following data :
                                                                                Objekttype           P   Person
ObjektID             00032422      ib
Betegnelse           ib, ibsen
Evalueringsvej       Z_ess_co Test af at finde hvilke objekter der er løn på t
                                                                                Behandlingsperiode   28.09.2008 til 31.12.9999
Where the person "00032422" is part of an organization with several employees. I was expecting a list of employees directly under the manager of employee "00032422".
Anything I have misunderstood or done wrong?
Thanks
/Jakob

Evaluation path for B002 - OOAW

Hi
I'm creating a evaluation path for fetching all reports under a line manager. Can someone please throw light on how to configure thie in OOAW. It works fine SAP_MANG, I tried to modify but iam not able to get this.
- Aravind

Hi,
B002 is normally used as an O-O relationship. If you look at evaluation path O-S-P in OOAW. You will see how it is used here.
O-S-P might actually meet your requirement.
let me know.
thanks.
JB

Is it possibel to create one connection [pool for one report only

Hi is it possibe to create one connection pool for one report only. Others report are running from the another connection pool under same DB.
Thanks,

Hi,
Why do u want seperate connectionpool for that single report?
I dont think its possible.Direct database request will be good solution for this.Try importing those columns which are used to build that report into physical layer and create new subject area.Not sure weather its right way to do.
Regards,
Srikanth

Evaluation Path for Position to Position Reporting Structure

Hello Everyone,
We currently have a position to position reporting structure in place. WIth this being said, not every supervisor in our organization is the chief of a team. I am trying to create an evaluation path that will look at a position, then go up to get the positions report to position (but not go up any further), then go down to get the positions that report to the supervisor. This will allow us to start with a position, then return all the positions that the report to position has. In essence this will allow us to start with a position and get the team (though we don't have an org unit for the team). I am trying to do this for the Team Calendar in ESS.
Below is what I have. The problem is with the depth, if I enter a 2, then it is not getting the lateral positions, but if I enter a 3, then it goes up to another level and gets an additional supervisor (which I do not want).
S     A     002     Reports (line) to     2     S
S     B     002     Is line supervisor of     1     S
S     A     008     Holder     3     P
Has anyone developed and Evaluation Path that does this (gets a positions team without having an org unit) and can offer assistance?
Best Regards,
Scott

My first suggestion was either use Bottoms-up approach or top-down dont use both..like either use either of below
S A 002 Reports (line) or
S B 002 Is line supervisor
but figured u will still have depth issues..so therefore
you cld experiment like below..i understood your requirement, and i am suggesting this totally off-hand thats on top of my head..as i said experiement doing this way..
say you have four levels why dont you use different evalutaion path to link them between each level..
say 1st to 2nd (reports to A002)
      2nd to 3rd (subordinate to A005)
      3rd to 4th/4th to 3rd (Is line supervisor B 002 )etc
this way you will not have the depth issue as each one is diffeent Ev path..
...oops i can see people laughing at this solution..but well..i tried!

MSS Team View evaluation path for non chief positions (s-s)

Hello,
We have a problem with display of employees under non chief manager - reporting managers (connection A002). In our organization we have line managers and under them team managers who are leading team of employees. Those managers want to see their employees under MSS Team View iView.
I have checked forum posts and try to create correct evaluation path but i didn't get results yet. I have created 2 evaluation paths:
Z_MANG (copy of SAP_MANG):
10 *     B 008      S
20 S    B 002      S
30 US A 208 P
Z_S-S (copy of MSSDIREC):
10 S A 002     S
20 S A 008     P
30 S A 008     US
I also included them into rules so:
Root rule (rule 1) - Z_MANG
Target rule (rule 3) - Z_S-S
I have also done customizing under Object and Data provider and if I choose standard evaluation paths (e.g. SAP_MANG and MSSDIREC), I get employees shown - if I give manager a hat (A012 connection).
Could you please help me with advice, where am I wrong? I think that first evaluation path (Z_MANG) is ok and it finds non chief manager, maybe is a problem with second one that don't show employees?
Thank you for answers in advance.
Best regards,
David

My first suggestion was either use Bottoms-up approach or top-down dont use both..like either use either of below
S A 002 Reports (line) or
S B 002 Is line supervisor
but figured u will still have depth issues..so therefore
you cld experiment like below..i understood your requirement, and i am suggesting this totally off-hand thats on top of my head..as i said experiement doing this way..
say you have four levels why dont you use different evalutaion path to link them between each level..
say 1st to 2nd (reports to A002)
      2nd to 3rd (subordinate to A005)
      3rd to 4th/4th to 3rd (Is line supervisor B 002 )etc
this way you will not have the depth issue as each one is diffeent Ev path..
...oops i can see people laughing at this solution..but well..i tried!

Evaluation Path for Appraisal docs

Hi Friends-
These FMs using such Evaluation Paths creating Appraisal docs for Given ' Org Unit '   'O'
1) HRHAP_DOCUMENT_PREP_ORG                      using   'BOSSORG' ,
2) HRHAP_PREP_READ_ORG_STRUCTURE         using   'HAP_ORG',
3) STRUCTURE_BUILD_MULTIPLE_ROOTS          using the same 'HAP_ORG'
What Evaluation Path i shd pass in these FMs   to create Appraisal docs for Given Employees ' Perner'   ?
These all FM used in one standard Report RHXHAP_APP_DOC_PREPARE    which i need to copy and enhance for pernr also ...
Or is there Standard FMs are there which creates Appraisal docs based on Employees 'P' ?
Pls share your inputs on this.
Regards
Meeta

ok

Evalution path for PFAL to handle concurrent employee asignment.

Hello,
While using PFAL to push any object of type 'P'(employee), the standard process is creating IDoc segments only for the given employee, But how is it possible to create IDoc segments for its other assignments also?
I need to create IDoc segments of all the assignments for the employee given in PFAL selection screen.
Is there any evalution path (relating to 'CP') could help?
Thanks.
Edited by: Parthasarathi Mohanty on Jun 1, 2011 1:01 PM

Hi,
Thanks,
A209 evaluation path adds the IDoc segment of the Central Person (CP) related to the 'P'.
I need the IDoc segments of all the assignments of the P.
For e.g: The 'P' entered in the selection screen of PFAL has 3 assignments with a single CP.
I need the IDoc segments to be created for all the 3 assignments. (Segments related to CP not required)

Evaluation path for MSS role

Hi all,
Is there a way to assign MSS role dynamically to an employee if he has employees reporting to him?
We have got to know that this can be achieved by configuring some evaluation path.
Any pointers would be appreciated!
TIA!

Diana,
Where actually do you assign the roles ,is it in the portal or you have a CUA system where all the role maintenance is done over there.if second one is true you can write a custom program and assign the role by checking the direct reportees
Thanks
Bala Duvvuri

Exchange 2010 SP3 Create Dynamic DL for Direct Reports

I am not sure this is possible but if there is a will there is a way I guess.
System: Exchange 2010 SP3 on Windows Server 2008 R2
I am trying to see if there is a way to create dynamic DLs for Manager(s) direct reports.
Example: Manager has 5 people that report directly to them, is there a way to make an dynamic email distribution list that will poll the direct reports as people leave or hired.
I know I can create one manually but some depts. may have high turnover rates which increase overhead so I am just trying to simplify the process. I of course googled my question but not getting the results I intended.
Thanks.

hi,
as from above i understand you are asking about creating an custom attribute and then referencing them .. if yes please check below command
Get-Mailbox -OrganizationalUnit Sales | Set-Mailbox CustomAttribute1 "SalesOU"Now you can create an e-mail address policy for all recipients that have the CustomAttribute1 property that equals SalesOU, as shown in this example.
New-EmailAddressPolicy -Name "Sales" -RecipientFilter { CustomAttribute1 -eq "SalesOU"} -EnabledEmailAddressTemplates "SMTP:%s%[email protected] check this.. http://technet.microsoft.com/en-us/library/ee423541%28v=exchg.150%29.aspx
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Evaluation Path for View of Organizational Structure

Hi all,
I am trying to define new VIEWID using EVPATH which would do the following filtering (by using f.m. HRWPC_GET_NAV_SUBTREE): giving org.unit number, it would return employees of current org unit and in case that there are some sub org units which dont have the boss also all employees of those org units and in case that the sub org. unit have the boss only the boss.
I saw there is Evaluation path SBES, which shows me the employees of given org unit, or SBESX which gives all including suborgs, but I cannot find Ev. path which will do more complicated conditions.
I can see EVPATH only on T778A table with short description, is there any other way to see them with more details?
Thank you and best regards,
Anna

Hi Anna,
You will find all the existing eval paths in table T778A itself.
I am not sure if you have seen the individual maintenance too.
You can also create your own eval paths acc to your requirement too.
But as far as i know all the things wrt to eval paths can be managed there itself
Hope it helps!
Regards,
SR

Evaluation path for team calender in MSS

Hi Experts,
I need to configure an evaluation path as follows.
1. A manager M1 belongs to org unit O1. He manages Org unit O2.
2. Org unit O2 reports to O1. similarly O3 also reports to O1.
3. Now I need to develop a evaluation path in which, M1 should have visibility to all employees from both O2 and O3 in his MSS..
I have tried out many combinations with A002 and B002 relationships. but it not working.
So could you help me to build this evaluation path.
Thanks
Sameer

there are standard evaluation paths available which should fulfil thsi requirement
Check SAP_MANG
SBESX
MSSDIREC
You can use report report RHSTRU00, to check your own path

Evaluation Paths for Audit Requirements

Hi,
For requirements, which belong to the "Subrequirements" requirements category, is "A500" typically the value that one would specify for this?
Thank you,
Eric

Yesterday, I defined the evaluation path as you suggested. I am still seeing problems, so I assume that I must have something misconfigured or unconfigured somewhere else. This implies that I'm probably not done bothering the forum yet....
As far as getting the "SC" requirement selection into 4.72, it is not much of an issue for me, since we are supposed to be upgrading fairly soon, and for testing purposes, I should be able to use an eval path. I might still post an OSS message, as you suggest.
One thing that would be nice would be a complete "changelog" to view somewhere. I can see the release notes for my version in the implementation guide, but it would be nice to see the release notes for all versions. This would allow someone to make a quick determination about what became available and when. If such a changelog already exists, can you tell me where to access it?
Thanks again for your help, Joachim.
Best,
Eric

Require Tcode or path for follwoing report.

hi,
We are looking for a report on purchase orders which compares delivery
date, statistical delivery date and effective goods receipt date. Is
there any possibility ?
Please also let me know, If this is not possible then, will it possible with ABPER help? Or using new development?
thanks in advance,

hi,
thank you for your reply. But In our sytem showing error for EKBF. Stating that this table does not exit.
Also in EKPO table, we not getting idea, by which field we do development.Please any one guide, In which table & by using which field we do development, to meet client requirement.
thank in advace,

Roles for showing reports only

Hi experts,
I have created one role in PFCG for BEx in which it is showing like this:
Infoarea -> Infocube -> Reports
Now I want to show only reports and to bypass Infoarea and Infocube.
Please help me to solve this..
Points assured.
Vinod.
Vinod Nagre

Dear Vinod,
what I understood from your query is that u dont want to show the BW Objects user just needs to access the reports. For this do the following
create one role in pfcg goto menu tab there click other (add other objects) button, select the SAP BW Query URL option -> Create Node window will open there u give the Report text and URL in Object description, then under role menu folder that url will come.
Assign this role to user.
When the user login to bw he can see these urls where he can access directly.
Assign Points please.........
Best Regards,
SG

Evaluation Path for Direct Reports only

Similar Messages

Maybe you are looking for