Exceed the budget value....

Hi Gurus'
Have been configuring the Fund Management - BCS ( Budget control System ) in ECC 6.00
For testing purpose, have created some budget value in FMBBC / FMBB. While making entry, it throw a error stating that it exceed the budget value. How can arrest it. Is it necessary to have Planning ( FMPLSET, FMPLCPD ) to solve the said error. If so how?
Please guide...
Thanks in advance.
regs / Devi aparna...
Moderator: Please, search SDN

Hi,
Use transaction FMRP_RW_BUDCON and check if Budget is available there..you may have posted budget through FMBB but does appear to have release the same through transaction FMMPRELE
Regards,
Chintan Joshi

Similar Messages

Fund managment exceeding the budgeted and committed items

Dear All,
In my client place we implement the fund management. we create the department wise fund center and related committed items.
For example for the Fund center Administration Expenses- Committed item is Advertising expenses. When ever i made the payment to that particular expenses if i exceed the budgeted amount it will though error .
Like this i am getting for the some of the fund center and commitment items. I am having department wise fund center and commitment items list of 50 under that for 25 fund center whenever i exceed the budget it shows the error message for the some of the fund centers it not showing any warning message. and also allowing to make entries so my fund center report is showing negative values. so please guide to solve this issue.
Regards
girija

Dear Alex,
in my client in Availability control limit
they send for
MSL MSL001 pb selected proceed ++ Action 1 usage % 90
Msl Ms002 Action 3 usage % 100
it is correct or not pl guide to solve this issue for half of the fund center and commitment item when exceed the budget it is through error but for the remaining fund center is is accepting.
Regards,
girija
Edited by: k.r.girija devi devi on Nov 13, 2009 5:14 AM

Load the Budget value at cost center level only

Hello All,
Can we load the budget value at the cost center level only with out using cost element . I have seen that we can from actual to budget in Kp98 at the cost Center level.
Thanks ,
Krishna

Hi
There is a work around...
You can create one Statistical IO for each cost center and upload your budget in it...
Keep the same nomenclature for IO as the Cost center i.e. If cost center name is 123456, have the same name for IO as well
In Substitution OKC9, you can use a Field to Field Mapping and populate same IO as the Cost center no in the posting or you can also use exit RGGBS000
br, Ajay M

How to Control Cheque value not exceed the PO Value

Dear All,
My client requirement of the how to control cheque make above the PO Value. My client make the PO before MIRO puchase dept. make the Advance payment request and send to Accounts Dept., Accounts dept. make the payment against the Down payment request. After that MIRO has been done full value open item show in vendor line itme. Account people clear the payment against the invoice. They run the APP & clear all payment. But after that Purchase dept. make the advance payment request against same PO and send to accounts dept., Accounts dept again make the payment against down payment request. This is request to how to control that.
Thanks in Advance
(CSB)

hi,
here in this case you should change the Business Process to have better control over the system.
Make the PO then make the Down Payment Request and make the payment.
check is there any user exit available while making the down payment request which should not be made more than the po value.

Changing Budget amount values after the budget is released in Compensation.

Hello All-
Is there a way to change the budget amount in a budhget unit in Compensation management once its released? The budget value once released goes into Infotype 1520 Final Budget. Is there a way to change that value? I tried using PP01 and PP02 but I can not see the value to change it.
Thanks-
Chakri.

HI,
You can not change the budget value once it's ben released.. you can create a new budget and tag it to the compensation adjustment.

Avaialability control is checked only if the assigned value is increased in PO

We are using former budgeting. We have have made the following setting. Warning message for AVC at Purchase requisition level and error message for AVC at PO and all other transaction groups. System is not issuing error message when the budget is exceeded in PO.
eg: Budget 1000
Purchase requisition created for 1100. Warning message at this stage is issued.
Purchase order created against this PR for 1100. I expect the system to issue error message. However, no messages are issued.
I would like to make the system messages error for processes starting from PO onwards like GR, SES, Invoice etc.
I understand this is the standard behaviour of SAP since the fund is already reserved at PR stage and as long as the assigned value does not increase from the PR value. However, we would like to issue error message at PO stage even if there is not change in the assigned value if the commitment exceeds the budget.
Thanks for your help.
regards
Raghuveer Kamath

Hi,
With BCS, you have a possiblity to issue a message, when a ledger is defined with so-called 'strict' logic. Otherwise, in former, if there is no decrease in consumable budget (and in your case there is none), AVC check is not triggered.
Regards,
Eli

Report Internal Order needed - showing Plan and Budget Values?

Hello,
I want to create a report (Report Writer/Painter) which shows for example in one column the planned values and in another column the budget value of an order group.
I know the standard reports S_ALR_87012993 - Orders: Actual/Plan/Variance and the other standard report S_ALR_87013019 - List: Budget/Actual/Commitments.
My question: Is it possible at all to have these both values plan and budget by order/order group in one report? - Or it is not possbile because these values are stored in different tables and different libraries?
If it is possible with Report Writer, I would be very glad - if not, is there any other chance (e.g. individual programmed report)?
For any comments or hints thank you in advance.
Regards,
VCG

HI,
both are report painter reports for libraries 6O1 and 6O2 which are based on reporting tables CCSS and RWCOOM.
Try to find all value fields that you need in 6O2 / RWCOOM as this is the "big brother" of 6O1/ CCSS.
Best regards, Christian

IM - Appropriation Request approval authorization based on Budget Value

Hi all,
Can someone help me confirm the following?
I'm implementing Investment Management module and use appropriation request (AR) to approve budgets where AR statuses can be approved only by certain authorization groups, and we do not use Workflow. The problem is that we want the status change not only based on authorization but combined with the budget value. For example, for budget <50,000 then Superintendants can approve the AR but if it's >50,000 then only Managers can approve the AR.
As far as I've looked, IM module does not provide this functionality where authorization can be restricted based on budget value. Can someone confirm this?
Thx very much in advance!
cheers,
-Ri-

The standard AR workflow sends a notification (document once approved) to the applicant and workflow to the approver (for approval). For details refer the link below:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/2a/f9f542493111d182b70000e829fbfe/content.htm
Standard reports under Investment Management>Appropriation Requests>Reports on Appropriation Requests>Master Data Lists ex.,T Code IMR5 - Appropriation Request Without Distribution Without Variants with changed layout to include system status would show you the required information.
Regards
Sreenivas

Budget values

HI all,
for one project budget values were defined in usd., we want to change the currency to other currency. .How can we change.??
in t.code: cj30 it's showing the budget values... but not allowing to change the currency....

Dear Anil,
In Oracle Human Resources you can enter staffing budget values and actual values for each assignment to measure variances between actual and planned staffing levels in an organization or hierarchy
Pls check the following link for more information,
http://download.oracle.com/docs/cd/E18727_01/doc.121/e13511/T227913T227917.htm
Guru K
Edited by: GURUK on Sep 26, 2011 4:05 AM

How to increase budget value

hello everyone,
I want to increase the budget value for my user for purchasing(making a PR) a new material.
so please tell me how can i do it.

You may want to check below web page
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/budget-controlling-in-sap-46c-1857690
http://help.sap.com/saphelp_em70/helpdata/en/e9/ea21fed8344747870dd12b95f525a0/content.htm

PO Value exceeded the ION Budget Value

We are able to add more value to the PO than the budgeted ION value attached to the PO .This is a standard SAP functionality that it should not allow the PO value to be more than the ION budget .Not able to arrive how this can happen .If some one can give possible scenarios when this can happen.
Thanks & Regards,
BCB

please check wht % you have maintained in Billing plan.
I think it might be Down payment less than 50%
or check the link
http://help.sap.com/saphelp_46c/helpdata/en/59/ac922bcb0411d2acbe0000e8a5bd28/frameset.htm
Edited by: WISH on Mar 11, 2008 10:30 AM

No error message while the budget is exceeded in PO

Hello,
I'm working in ECC 6.
I created a PO with budget data (Fund, funds center and commitment item) with reference to an existing contract (without account assignment in the contract).
the budget was exceeded and the budget data was incorrect, but the system lets me save the PO.
It seems the system checks the target value in the contract and doesn't check the budget in the PO line item ...
When I tried to reproduce the same in the system R/3 release 470.
I have the error message BP629 " payment budget exceeded" and this is what I was expecting to have in ECC.6 but it was not the case.
is there an exit missing or customizing missing in ECC.6 to ask the system to check to budget availability for the PO linked to a contract??
Thanks for your help,
Regards,
Chiachen

Hi, then check
1. CI info(as I wrote below)
2. Budget profile in OF12(total or annual amount), which assigned to FM area(in OF 34)
3 OF20 if AVC switch on for Value type 51 with action 3(and for apropriate budget- Commitment or payable)
4 OF23 check if AVC switch on for your account assignments from PO
5 try to reconstruct AVC in FMBV
6. Check if in PO amount not statistical

Down payment against a PO not to exceed the agreed %age of PO value

Dear friends,
Here's my problem:
Scenario 1.: While doing F-48 (downpayment to vendors), how can we ensure that the down payment made against a purchase order should not exceed the agreed percentage of total value? This means that advance should be made as per the payment terms given in the PO. PO field in F-48 has already been made mandatory.
For Example if 10% advance is agreed upon, then the system should not pay beyond 10%.
Scenario 2.: My client has payment terms with various vendors such that a part of PO value would be paid in advance. %age of advance may vary from vendor to vendor. Can this be done in SAP? Can we have such Payment terms in PO or vendor master with a provision by which either a Down Payment Request , for say 10%, is triggered as soon as a PO is generated or the system should not allow a manual downpayment (F-48) for more than the agreed %age?
Thanks,
Amit Bharti

Dear,
The same requirements possible after implement EHP4 Package upgrade.
Regards,
Kishore

Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator

Issue : In sharepoint 2013, I am experiening below error while using filter in the list view due to the number of items in this list exceeds the list view threshold, which is 10000 items. Tasks that cause excessive server load (such as those
involving all list items) are currently prohibited.
Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator
Could you please suggest a way to avoid this issue apart from incrementing the list view threshold limit .
Prashanth

Reorganizing content, or creating more specific views. sharepoint is warning you that the content is structured in such a way that it can cause performance issues, which should be addressed in some way.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

POs value exceeding overall budget in WBS

Hello
I'm an auditor in a multinational company that uses SAP. I have came upon a case in which the overal budget for a WBS is 100,000 and the total value of the POs opened against this WBS is around 140,000. Invoices recorded against these POs are less than 100,000. I have checked in the WBS and saw that the budget control for it is activated.
I'm trying to understand what happened but I can't as of now.
Can someone help me?
Thanks a lot in advance

Goodmorning
can you please tell me how to see the tolerance levels set in AVAC?
As far as invoices and deliveries is concenrned I have checked and I have seen that they have only received and been invoiced with part of the quantitied order and not for everything. More specifically the overall budget of the WBS is 100,000 and they have raised 4 POs against this WBS with total value of 151,0000. They have only received u20AC 74,000 and for the rest I have seen that they haven't received anything.
The overdelivery tolerance set at the PO level is 5%.
Thanks a lot in advance

Exceed the budget value....

Similar Messages

Maybe you are looking for