EXCEPTION_ACCESS_VIOLATION issue with regard to OpenGL

EXCEPTION_ACCESS_VIOLATION issue with OpenGL occurring with the Java SE Runtime Environment 6u17 on Windows 7, 32 & 64 bit platforms.   Version 6u24 and later does not produce the crash. However, we cannot use any other version of JRE other than 6u17 due to customer constraints. The two primary scenarios where crash  (jvm exits) occurs are: 1) toggling between two applications then selecting an image item on screen ( OpenGL rendering takes place)... (Log file: hs_err_pid6568_C2_TC_error.log). Scenario 2: When panning an image (OpenGL rendering takes place) and then clicking a button to load additional image data (OpenGL rendering takes place), crash occurs (Log file: hs_err_pid6036_ENR_TERRAIN_crash.log)
Is there any Oracle documentation noting any JRE fixes between 6u17 and 6u24 that might at least mitigate the issue(s) described above? Or information with regard to issues between JRE's and OpenGL ? Also, if anyone can advise on code mods, etc that we can try toward said mitigation efforts of course would be helpful.
The following snippet hopefully should suffice as general example for both noted issues:
Log snippet ( hs_err_pid6568_C2_TC_error.log):
# A fatal error has been detected by the Java Runtime Environment:
#  EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6ec158d6, pid=6568, tid=7176
# JRE version: 6.0_17-b04
# Java VM: Java HotSpot(TM) Client VM (14.3-b01 mixed mode windows-x86 )
# Problematic frame:
# C  [GLU32.dll+0x58d6]
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
---------------  T H R E A D  ---------------
Current thread (0x4d996000):  JavaThread "pool-6-thread-1" [_thread_in_native, id=7176, stack(0x502b0000,0x50300000)]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000028
Registers:
EAX=0x00179ca0, EBX=0x00179ce8, ECX=0x00179ca0, EDX=0x5691e9a0
ESP=0x502ff4ac, EBP=0x502ff4cc, ESI=0x00000000, EDI=0x00179ca0
EIP=0x6ec158d6, EFLAGS=0x00010246
Top of Stack: (sp=0x502ff4ac)
0x502ff4ac:   6ec13548 001833f8 0018e060 0018e018
0x502ff4bc:   00179ca0 00000000 00000018 502ff4f0
0x502ff4cc:   502ff4f0 6ec165a8 001a5038 0018e048
0x502ff4dc:   0018e018 001cd728 6ec147d7 001cd728
0x502ff4ec:   001a5038 502ff514 6ec14925 2e5096af
0x502ff4fc:   5f338d35 5038bf30 001a5038 001a5038
0x502ff50c:   02e177c2 0016b930 502ff534 6ec12c65
0x502ff51c:   001a5038 5038bf30 0000001d 001a5038
Instructions: (pc=0x6ec158d6)
0x6ec158c6:   30 dc 61 30 eb e7 dd db dd d9 dd d8 c3 dd 41 28
0x6ec158d6:   dc 66 28 dd 42 28 dc 61 28 d9 c0 d8 c2 d9 ee d8
Stack: [0x502b0000,0x50300000],  sp=0x502ff4ac,  free space=317k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C  [GLU32.dll+0x58d6]
C  [GLU32.dll+0x65a8]
C  [GLU32.dll+0x4925]
C  [GLU32.dll+0x2c65]
C  [pep_gx.dll+0x3dc8]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j  com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative.nativeGetRenderedChart(Lcom/cimmeria/efb/crom/common/utility/ILogUtility;Lcom/cimmeria/efb/crom/common/jni/JNIErrorInfo;Lcom/cimmeria/efb/crom/tc/cmn/jni/IChartImageProxy;IFZI)V+0
j  com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative$RenderCallable.call_aroundBody2(Lcom/cimmeria/efb/crom/tc/cmn/jni/ChartRendererNative$RenderCallable;Lorg/aspectj/lang/JoinPoint;)Ljava/lang/Object;+51
j  com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative$RenderCallable.call_aroundBody3$advice(Lcom/cimmeria/efb/crom/tc/cmn/jni/ChartRendererNative$RenderCallable;Lorg/aspectj/lang/JoinPoint;Lcom/cimmeria/efb/crom/tc/cmn/aop/RuntimeExceptionAndErrorMonitorAspect;Lorg/aspectj/runtime/internal/AroundClosure;Lorg/aspectj/lang/JoinPoint;)Ljava/lang/Object;+14
j  com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative$RenderCallable.call()Ljava/lang/Object;+34
j  java.util.concurrent.FutureTask$Sync.innerRun()V+30
j  java.util.concurrent.FutureTask.run()V+4
J  java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Ljava/lang/Runnable;)V
j  java.util.concurrent.ThreadPoolExecutor$Worker.run()V+28
j  java.lang.Thread.run()V+11
v  ~StubRoutines::call_stub

There are some other solutions possible.
1. Get another driver. The only one known is java only so it wont crash. But is not not free.
2. Use a proxy driver. That means that another app actually does the database work. If it crashes you just start it again (which you can do in your main code.) That way it won't take down your server. There are commercial jdbc drivers that claim MS Access but are are really just proxy implementations as an option in this area.

Similar Messages

  • Issues with regard to images in mailforms the interaction center

    Hi experts,
    I'm having issues with the mailforms created in the manager IC role in CRM. When creating mailforms I want to add the logo of our company to the message. Therefore we use the 'insert image' icon. Till that point everything seems fine. However, when this mailform is used receivers receive a red cross where the picture was placed instead of the attached picture.
    Thanks in advance,
    Paul

    Hi Sigrid, thanks for your respons!
    In my situation the problem is more related to outbound mails. Creating a mailform in the IC manager part of the IC (including an image) goes well, the picture I add in the bottom part (by clicking the insert image icon) of the mail is viewed correctly. When IC email agents open the mailform to use it as a standard reply, they also see the view including the picture. However, the receipants of our mails get a red cross instead of the picture that was added. Do you have an idea how this can be solved?
    Best regards,
    Paul

  • (10gR2) Is there any issue with regard to "Allocation type" of Tablespace?

    Hi, all.
    What could be the effects of two "allocation types" of Tablespace in 10g??
    .EXTENT_MANAGEMENT --> LOCAL
    .SEGMENT_SPACE_MANAGEMENT--> AUTO
    .ALLOCATION_TYPE --> (system, uniform)
    As you know, oracle recommends "LOCAL" AND "AUTO" tablespaces.
    However, I am not sure about "allocation type of tablespace".
    The database is for DataWare housing, not OLTP.
    Which option is recommended and why?
    Thanks in advance.
    Have a good day.
    Best Regards.

    I prefer using Uniform size clause as we have got control on the extent size. You can have multiple tablespaces with different Uniform size so that based on your requirement , you can allocate tables to different tablespaces
    Regards
    Amit

  • Issue with regard to the contact logging field after customers end the call

    Hi all,
    I've got a question related  to the following. When our agents answer an incoming call they directly start 'Contact Logging'. They do so by filling out notes. However when a customer ends the call the contact logging screen starts refreshing(?) and therefore, when this refreshing(?) happens the typing in the screen stops and they have to select the notes field again to continue. Does anyone know what drives this refreshing, is it possible (and if so how) to do the refreshing after for example a minute? And what are the consequences of this possible change?
    Thanks in advance,
    With kind regards,
    Paul

        MPerreca, This is quite a lot for you to have to go through! We surely don't want to lose your business as we appreciate your loyalty with us. I understand the challenges that can come in needing the shipping address changed on your phone orders. I'm glad to learn that the phone is now on it's way.
    I'm confident that you'll be fine with submitting the rebate for your phone. If you do run into troubles with the submission, please let us know. You can also pre-submit your rebate information, here: http://bit.ly/1kKwKJK. Let us know if you have further concerns.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • Upgrade issues with regard to LW 8.5 and DB toolkit 1.0.1

    Hi!
    After I did an upgrade from LW 8.2.1 to LW 8.5 the database toolkit 1.0.1 is not working. The only VI accessable in the menu is the variant to data.vi   and my own developed vi suddenly got a broken arrow and are not executable.
    It seems like the other package from the Internet toolkit 6.0 is working, so the DB failure is strange. Do you have any ideas or similar experience, please let me know, I desperatly need to fix this problem.
    A

    All the toolkits install all screwed up when you have multiple versions of labview on the same PC.  Usually you have to uninstall them and reinstall them or something like that, I forget exactly.  But all the toolkits are totally unmaintained by NI, they have three different types of installers so all the switches are different, and they love to uninstall themselves from 7.1 instead of install themselves on 8.2... stuff like that.  You can get them right if you put some time into it.
    By the way, the database toolkit no longer saves variants to a database from labview 8.0 and later.  It looks like it does, but 8.0 and later changed the variant type and the toolkit no longer saves them properly.  If you need to save variants to a database you need to figure out some other way of doing it.
    -Devin
    I got 99 problems but 8.6 ain't one.

  • Issue with Grn Reversal

    Hi Experts
    We are facing  an issue with regard to GRN reversal for a purchase order.
    When we try to DO a GRN reversal the system message states " no suitable item found" .
    The Po has multiple line items and Goods receipt Document for the line item for which we are trying to do reversal  is created . Also we find that their is a confirmation control key "shipping notification" associated with this line item . Their are no inbound delivery details for this line item.
    The Vendor master does have a confirmation control key in the purchasing data view but this was updated in vendor master after GRN date for the line item
    Please suggest/advice how confirmation control key was activated  for the line item in the Po whose GRN was already done
    and now when we are trying to reverse it the system doesnot allow due confirmation control key activated in the line item
    Thanks

    Check it
    http://www.sap-img.com/materials/explain-about-the-po-confirmation-control-key-in-detail.htm

  • Security issues with connecting pdf to database

    I have a pdf form that is being called from a webform as part
    of a web application. The PDF has two dropdown lists that I was
    populating from a SQL Server Database. I had created a special user
    that had select access only to the tables for the dropdowns.
    My question is are there any known security issues with
    regard to allowing a pdf to connect to a database this way. The PDF
    is being called from a secure connection but I don't know if
    opening this database connection to populate these dropdowns
    exposes a security hole of any sort. If it does, do you have a
    solution to make this secure? I am asking because another developer
    on the project brought up the issue of this design creating a
    security risk and I haven't been able to find anything online
    discussing it either way.
    Thanks!
    Maureen

    Hello Maureen,
    Thanks for posting, but I'm not sure I see if your question
    relates to Acrobat.com
    Are you using any of the Acrobat.com Services as any part of
    your workflow?
    Thanks!
    Pete

  • Performance issue with BSEG

    Hi,
              I am having serious performance issue due to BSEG table .I am having a change request in which I have to solve the performance issue with regard to BSEG. The situation was that previously they had used select * on both BKPF and BSEG. I removed the select * and selected only those fields which are required as shown below. I also tried using cursors. But the problem is happening in the TEST server where BSEG is having more than 1 crore entries. I have gone through some threads but still not able to understand how to solve this problem. Please help
    select bukrs belnr gjahr bldat bstat from bkpf into table T_BKPF_p
                                                    WHERE BUKRS IN sd_bukrs AND
                                                    BLDAT < s_bldat-low
                                                    and  BSTAT = ' ' .
    select bukrs belnr gjahr shkzg dmbtr hkont from bseg into table T_BSEG_C
                                            FOR ALL ENTRIES IN t_BKPF_p
                                            WHERE BUKRS = T_bkpf_p-bukrs
                                            AND   BELNR = T_bkpf_p-belnr
                                            AND   GJAHR = T_bkpf_p-gjahr
                                            AND   HKONT = SKB1-SAKNR.

    Hi Kunal,
    Here is my take on your issue.
    In your select statement on BKPF you are selecting every BKPF record for a specified company code and blank document status that was created before a specified date. If your company has implemented SAP 10 years ago, and your user enters todays date and leaves the company code field blank you will effectively be retrieving almost all the records from BKPF (excluding the ones created today or those with non-blank document status). This would effectively be a huge amount of data. After that you are looking for the corresponding BSEG records for all the records that you have selected in BKPF.
    My question to you is why do you need to look at all the records before a given date? Why not ask the user to enter a smaller date range and make the document date and the company code a mandatory entry? You do not have to look at 10 years worth of data especially if you are running this online (as opposed to in the background).
    Your BSEG select looks correct. There is very little that you can do except for adding BUZEI to the field list. If you use for all entries and do not include the entire primary key you could lose data.
    TABLES: bkpf,
            skb1.
    SELECT-OPTIONS: s_bldat  FOR bkpf-bldat OBLIGATORY,
                    sd_bukrs FOR bkpf-bukrs OBLIGATORY.
    TYPES: BEGIN OF ty_bkpf,
            bukrs TYPE bkpf-bukrs,
            belnr TYPE bkpf-belnr,
            gjahr TYPE bkpf-gjahr,
            bldat TYPE bkpf-bldat,
            bstat TYPE bkpf-bstat,
          END OF ty_bkpf,
          BEGIN OF ty_bseg,
            bukrs TYPE bseg-bukrs,
            belnr TYPE bseg-belnr,
            gjahr TYPE bseg-gjahr,
            buzei TYPE bseg-buzei,
            shkzg TYPE bseg-shkzg,
            dmbtr TYPE bseg-dmbtr,
            hkont TYPE bseg-hkont,
          END OF ty_bseg.
    DATA: t_bkpf_p TYPE TABLE OF ty_bkpf,
          t_bseg_c TYPE TABLE OF ty_bseg.
    SELECT bukrs
           belnr
           gjahr
           bldat
           bstat
    FROM bkpf
    INTO TABLE t_bkpf_p
    WHERE bukrs IN sd_bukrs
    AND   bldat IN s_bldat
    AND   bstat EQ space .
    IF NOT t_bkpf_p[] IS INITIAL.
      SELECT bukrs
             belnr
             gjahr
             buzei
             shkzg
             dmbtr
             hkont
        FROM bseg
        INTO TABLE t_bseg_c
        FOR ALL ENTRIES IN t_bkpf_p
        WHERE bukrs EQ t_bkpf_p-bukrs
        AND   belnr EQ t_bkpf_p-belnr
        AND   gjahr EQ t_bkpf_p-gjahr
        AND   hkont EQ skb1-saknr.
    ENDIF.

  • CC 2014 OpenGL issue with GeForce Gt 740M

    Hi community,
    I have some issues with using Photoshop CC 2014. From the moment I start the program my notebook fan will start working at 100%, but CPU usage is just around 5%. I discovered that it is probably an GPU issue. When I put the option 'Use Graphiprocessor' off, the fan in working normal. Even if I just deactivate OpenGL, the fan is working normally. I already updated my drivers. My notebook is running two graphic cards, the GeForce GT 740M and the Intel HD 4000. I was testing both cards with Photoshop and it's the same for both of them. As soon as I put OpenGL the fan is going crazy. I don't know if its really a graphic card / driver issue, since it happens with both of them.
    I hope you can help, because I really would like to use Photoshop, but with all time 100 % fan speed it is impossible.
    Thanks in advance and best regards,
    Moritz

    I have the Nvidia driver from the Nvidia site and the Intel one from my notebook producer (ASUS). I tried to install the Intel driver from their page, but an error occured (not authorized for my system or something like that). The Nvidia driver offered by ASUS is older than the one I installed from the Nvidia site.

  • Hi, i am having an issue with a basic motion scroll effect.  I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me-, probably he didn't unde

    Hi, i am having an issue with a basic motion scroll effect.
    I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
    please note, that i am new to muse, this is my first project ever.
    my idea is as following:
    when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
    so…..
    now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
    now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
    now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
    when i am scrolling down the WHOLE logo goes down…. so far so good.
    NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
    so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
    the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
    NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
    SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
    BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
    short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
    but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
    Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
    Thanks so much to everyone who actually reads this post and tries to help…….
    All the best,
    Niki Lapan

    Thank you so much for helping,
    But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
    Anyway thank you very much for your time and effort!!!!

  • Regarding Sun Java System Application Server Issue with JVM

    Regarding Sun Java System Application Server Issue with JVM
    Hi
    I have installed SJSAS9.1 on solaris system. I m trying to deploy war file which i compiled in windows enviorment by jdk1.5.0_05. Every time i got the following error :
    type Exception report
    message
    descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: PWC6033: Unable to compile class for JSP
    PWC6199: Generated servlet error:
    [javac] javac: invalid target release: 1.5
    [javac] Usage: javac
    [javac] where possible options include:
    [javac] -g Generate all debugging info
    [javac] -g:none Generate no debugging info
    [javac] -g:{lines,vars,source} Generate only some debugging info
    [javac] -nowarn Generate no warnings
    [javac] -verbose Output messages about what the compiler is doing
    [javac] -deprecation Output source locations where deprecated APIs are used
    [javac] -classpath Specify where to find user class files
    [javac] -sourcepath Specify where to find input source files
    [javac] -bootclasspath Override location of bootstrap class files
    [javac] -extdirs Override location of installed extensions
    [javac] -d Specify where to place generated class files
    [javac] -encoding Specify character encoding used by source files
    [javac] -source Provide source compatibility with specified release
    [javac] -target Generate class files for specific VM version
    [javac] -help Print a synopsis of standard options
    note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
    I have cheked jvm version on both system the only difference is :
    Solaris points to jdk 1.5.0_09
    Windows point to jdk1.5.0_05
    Even i tried to run blank jsp also but again i got the same error.
    Can any help me to sort out the problem or give me any idea so i can do something by my own.
    Thanks in Advance
    Gagan

    Do you have ANT installed and available?
    Thanks,
    Kedar

  • Adobe CS4 OpenGL issues with 10.6.2 and Intel GMA950 video card

    I just upgraded to Adobe CS4 and in PS I cannot enable OpenGL. I'm running 10.6.2 on a Macbook with the Intel GMA950 video card.
    I was wondering if 10.6.2 does not have the relevant drivers for CS4 to recognize this chipset or that since the video card is integrated (as opposed to a stand alone with the newer Macbooks) that Intel has not update the drivers? It ***** since I cannot use some functions inside PS without OpenGL.

    Hello blue20 & welcome to discussions
    1.) You can search these forums for the topic of:
    Adobe CS4 GMA950
    As an example, if you haven't already, in an effort to parse what's already been discussed.
    2.) Have you looked at any of the Adobe forums:
    http://forums.adobe.com/message/2356530
    3.) How many fonts are you working with?
    The general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
    Start there to be sure all fonts that are in play come out with a clean bill of health.
    Don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
    By all means be sure any 3rd party apps AND plug-ins are Snow Leopard compatible.
    An additional measure is to clear the existing font caches:
    http://www.macworld.com/article/139383/2009/03/fontcacheclear.html
    That said, 10.6.2 release notes have this to say about fonts:
    http://support.apple.com/kb/HT3874
    Fonts fixes provided for:
    • an issue with font spacing
    • an issue in which some Fonts are missing
    • font duplication issues
    • an issue with some PostScript Type 1 fonts not working properly
    Good luck in any case.

  • HT4623 My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue

    My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?

    Hi there Double2D,
    You may find the troubleshooting steps in the article below helpful.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    -Griff W. 

  • How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    Click here for the instructions on stopping the emails.
    (85713)

  • I have issue with my account acutely I can't download any application when I try to downloading any application it show my Apple ID has been disabled ,so please I want to get your usual support.  Beat Regards..

    I have issue with my account acutely I can't download any application when I try to downloading any application it show my Apple ID has been disabled ,so please I want to get your usual support.

    Sweet-jeje wrote:
    ... it show my Apple ID has been disabled ,..
    If disabled for Security Reasons... See here  http://support.apple.com/kb/TS2446
    If not for Security reasons...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for