Excise in Depot to Depot STO

Hi Gurus,
The process in Depot to Depot STO process.
Say Depot A is importing a material and transferring to another Depot B.
Depot B raised an PO and A sent the goods via outboun delivery along with the Excise inv generated thru J1IJ.
Now when we do MIGO at the receivin plant , we refer the outbound delivery and give the excise inv no( generated thru J1iJ w/r to delivery) and also the excise duty details manually and Posting done. Also we can view the entire excise details in table J_1irg23d for the material doc no. generated from outbound delivery for GRPO with receiving plant.
My query is, Is the STO process completes with this MIGO itself? Or shuld i have to perfom J1IG also w/r to material doc.
If i do so system gives an error saying "Excise invoice already exists ".
Pls clarify. Thanks.
Reg,
JJ

Hi,
I hope your business is following this process
Import Material to Depot
1. ME21N - Import PO to Depot (normal PO u2013 Document type NB)
2. MIGO - Goods Receipt (movement type 101)
3. J1IG - Capture Excise
Stock transport Order from Depot to Depot
4. ME21N - Depot to Depot (Stock Transport PO u2013 Document type u2013 UB)
5. VL10B u2013 (Replenishment Delivery)
6. VL02N u2013 (Changing Delivery created in 5 above, picking & Post goods Issue)
7. J1IJ - Excise invoice capture must be according to (3) J1IG
8. VF01 u2013 (Creating Stock Transfer Invoice)
9. MIGO u2013 (GRN in Receiving depot) if you were selected the " RG23 D only" option from  "Excise Tab" in MIGO Tcode. then no  need to go for  below J1IG . (It means J_1Irg23D" table with all the entries)
If you were selected "No excise entry" option in MIGO then go with below step.
10. J1IG -  In this Enter excise values manually .
I hope you will clear the DEPOT to DEPOT STO process.
Thanks
Mahesh Naik.

Similar Messages

  • Excise Invoice printout at Depot

    I am doing Stock Transfers from Depot to Depot with Shipping.
    After creating Excise Invoice in J1IJ, I am doing Proforma Billing for STO, but I am not able to get the Excise values in the Print out along with Moving Average Price from supplying Depot.
    But when I am doing Stock Transfers from Plant to Depot I am able to get a printout with correct values.
    Any tips for this.

    Being it a depot, you can only pass on the excise duties with reference to original mother invoice receipt from a Plant.
    as you do in J1IJ.
    Scenario of a stock trasnfer from plant to depot & depot to depot are completely different as stated above.
    You will have to do some workarounds for such scenarios with your pricing.
    regards,
    AK
    Edited by: Akhileshwar Kashyap on Dec 2, 2009 9:38 PM

  • STO depot to depot

    Hello
    While doing STO between depot to depot for the same company am getting this error.
    I did this ME21N- VL10B-Vl02N-VF01- then if  I go with J1IIN to get excise invoice  then system comes with this error message.
    "Document is of plant 1871 which is defined as depot in Plant settings"
    And
    If I go with J1IJ to get excise invoice  then system comes with this error message.
    "Excise invoice selection not complete for the item 000010"
    Kindly advise.
    Looking for a early reply. Thanks in advance.
    With Regards
    Madhu

    if you are Importing  Material to Depot
    ME21N - Import PO to Depot (normal PO u2013 Document type NB)
    MIGO - Goods Receipt (movement type 101)
    J1IG - Capture Excise
    then  Stock transport Order from Depot to Depot
    create ME21N - Depot to Depot (Stock Transport PO u2013 Document type u2013 UB)
    VL10B u2013 repl delivery
    VL02N u2013 pgi
    J1IJ - Excise invoice capture
    VF01 u2013 (Creating Stock Transfer Invoice)
    MIGO u2013  select   " RG23 D only" option from "Excise Tab" in MIGO Tcode. then no need to do j1ig
    If you  selected "No excise entry" option in MIGO then do the  J1IG - In this Enter excise values manually .
    hope u understand
    bye and tc

  • Capturing Excise Invoice (EI) at depot

    Hi gurus
    I am facing an issue while capturing Excise Invoice (EI) at depot.
    If non-batch material and batch material are combined into one material document which is generated after post goods issue (PGI) to create EI, two separate Excise Invoices are getting generated automatically.
    But while capturing Excise Invoice for both materials at depot, I am NOT able to capture in T-code J1IG by Goods receipt material documents.
    How to handle such case? Could you give us some suggestion?
    With Regards
    baalakrushnan.da

    Hi Ashok,
    After MB1C, when we are trying to execute J1IG with the material document number and then click "Details" button, the new screen asks for internal document number. We click on "More Documents" and manually enter the excise values along with excise invoice details and save.
    This reflects the values in the RG23D and displays in J1IDEPOTSTOCK1 report also.
    But when we try to sell from the Depot and create J1IJ, the uploaded invoice is not getting displayed when we are trying to select it to pass excise value.
    How can this invoice be selected in J1IJ, if we follow this route.
    Is this the correct process or I am making some mistake in the J1IG step.
    Regards,
    Debarshi

  • Additional Excise in case of Depot

    Dear All,
    I want to debit customer for addtional excise in case of depot.
    Can any one help me out with the solution???
    How can I post excose entries in System. ??
    Thanks & Regards
    Rasik Waghela

    Hi
    Hope it will solve your problem,
    Create supplimentry invoice request instead of debit memo for the amount you want to debit to customer, with the supplimentry invoice request you can create invoice (It dont require delivery as it is supplimentry invoice) based on commercial invoice you can create excise invoice for the amount which you want to debit the customer.
    Hope it will solve your problem. If solve then give points
    Regards
    Shambhu Sarkar

  • Excise duties not updated in goods receipt in depot to depot stock transfer

    Hi,
    I have a problem, while doing goods receipt at depot in the case of depot to depot stock transfer. In the excise invoice tab, I am providing the sending depot's excise invoice number. Then I am facing an error as "Excise invoice doesn't exist in supplying plant.
    How to solve the above, pls give me inputs.
    Regards,
    CS

    Hi,
    Have you set the vendor number in Customer Master and
    customer number in vendor master at the Company Code/Purchase Org level?
    -GShankar

  • Excise Invoice cancellation in Intercompany STO

    Hi,
    We are creating the Intercompany STO from Depot to manufacturing plant.
    1)Creating the STO. Receiving plant is manufacturing plant
    2)Created the GI
    3) created the Outbound delivery
    4)Created the Outgoing excise invoice J1IJ from Depot.
    5) we are receiving the Goods at manufacturing plant with ref to Outbound delivery(materils is received at Quality Inspection first)
    6)Created the Excise Invoice "J1iex" Option "Capture excise Invoice" and "Without Purchase order"
    Sytem is created the partI and partII entries.
    Now we want to cancel the excise Invoice, How to do? we are trying to cancel but unable to do that?
    Regards
    Sapman man

    When you are returning the material, you get a material document.
    You create an Excise invoice by using J1IS transaction with reference to the material document.
    This excise invoice will come for monthly utilization
    regards
    prasad

  • Problem in Stock Transfer Depot to Depot.

    Hi All,
    The Scenario is we are importing the Trading Material to Depot from there we are transporting to other depot & then send to the Customer.
    Import Material to Depot
    1. ME21N - Import PO to Depot (normal PO u2013 Document type NB)
    2. MIGO - Goods Receipt (movement type 101)
    3. J1IG - Capture Excise
    Stock transport Order from Depot to Depot
    4. ME21N - Depot to Depot (Stock Transport PO u2013 Document type u2013 UB)
    5. VL10B u2013 (Replenishment Delivery)
    6. VL02N u2013 (Changing Delivery created in 5 above, picking & Post goods Issue)
    7. J1IJ - Excise invoice capture must be according to (3) J1IG
    8. VF01 u2013 (Creating Stock Transfer Invoice)
    9. MIGO u2013 (GRN in Receiving depot)
    10. J1IG - (over here i am not able to capture the excise from 7.J1IJ - I am doing excise capture from 3.J1IG. Even though its coming properly i like to clarify on this point.)
    Eg:- Purchased : 5000 PCS > Post goods Issue & Excise invoice capture for 2000 PCS is done. After this process i am not able to capture the excise from J1IJ but i am capturing it from earlier J1IG it's taking up the excise for 2000 Qty.
    Then the Normal Sale Process. Let me know any other thing has to be taken care in this process flow or this is the way it has to be done.
    Note:-I am not able to capture excise in MIGO stage for this scenario alone. I am capturing at J1IG only. I need the kind inputs to solve the Problem.
    Thanks in advance.
    Sapuser
    Edited by: Sap user on Nov 12, 2008 2:02 PM
    Edited by: Sap user on Nov 13, 2008 8:08 AM

    Hi All,
    For this Scenario (Step 9 -MIGO) is done through Goods Reciept with Outbound delivery at this time i am not able to capture excise at MIGO stage as there is no commercial invoice is being created at this point. So i am capturing it at J1IG over thier if i give Internal Excise number generated from J1IJ it's giving an error Internal Excise number does not exist. It's working fine when i give the earlier Internal Excise number generated at (J1IG Step 3).
    Thanks in Advance,
    Sapuser
    Edited by: Sap user on Nov 14, 2008 7:07 AM

  • Depot to depot stock transfer- capture of original invoice is not happening

    Dear Experts,
    In Depot to depot stock transfer scenario, in J1IJ the depot excise invoice is created with reference to the earlier excise invoice captured at supplying depot but here assessable ( excise base value ) is not updating.
    and  when I refer the J1IJ depot invoice number again in the receiving depot, I am getting an error excise invoice does not exists in supplying plant even though such invoice exists. kindly mention the causes for the same and also please suggest how to rectify the same
    Balu

    s

  • Depot to depot transfer

    depot to depot transfer....
    in depot 1 J!IJ excise invoice duty values are coming correctly but in depot 2 J1IJ excise invoice all the details are correct but duty values are zero.
    what should be the correct process?

    when doing migo in depot 2 ,what excise invoice (exnum) (of the supplying plant which is a depot )should be referred??
    the supplying plant's invoice is a depot excise invoice ,which on being referred in MIGO gives the info message "excise invoice doesn't exist in the supplying plant".still if i save the material doc gets saved and posted.
    subsequently the j1ij invoice from depot2 has no duty values, although quantity posting in rg23d register is correct.
    mention the exact process in migo of depot 2.
    Edited by: anubrota mukherjee on Aug 30, 2009 9:36 AM

  • Depot to depot stock transfer process

    Dear Experts,
    We want to do Depot to depot stock transfer, Can any body explain the following 2 processes:
    1. Complete process flow in case of Duty paid depots.
    2. Complete process flow in case of Non-Duty paid depots.
    Please explained this process with tcodes, which are using for this.
    Thanks & Regards,
    Shatrughan

    Please search the forum before you post your questions.This question has been addressed sevaral times earlier.
    Please go through the below link.
    [Re: Process flow of Depots]
    Regards,
    Phani Prasad

  • Stock Transfer of Excisable goods from Depot to Depot

    Hi,
    We are facing an issue with Stock Transfer of Excisable Goods from an excisable depot to another excisable depot which had arrived from an excisable manufacturing plant.
    We are following the below steps:
    1. Create STO PO at Depot A (ME21N)
    2. Delivery of Goods from Depot B (VL10B)
    3. Create Depot Excise Invoice at Depot B with reference to Orginal Manufacturing Excise Invoice (J1IJ)
    4. Goods Receipt at Depot A (MIGO)
    5. Capture Excise at Depot A (J1IG)
    We are getting stuck at Step 5. When we are performing J1IG and entering Depot Excise Invoice or Original Manufacturing Excise Invoice, we are getting an error message as "Excise invoice does not exist in Supplying Plant".
    Kindly suggest how to capture excise at Depot A.
    Regards,
    Debarshi

    Dear G. Lakshmipathi,
    We have tried your solution but we are still stuck at the same place.
    In J1IG, if we enter the Depot B excise invoice and press enter, we are getting the message "Excise invoice does not exist in Supplying Plant".
    If we enter the Original Manufacturing excise invoice and press enter, then also we are getting the message "Excise invoice does not exist in Supplying Plant".
    If we enter the Depot B excise invoice and give a tick in the "Depot Excise Invoice" and press enter, we are getting into an infinite loop.
    Kindly suggest how we can capture the excise at Depot A.
    Regards,
    Debarshi

  • Capturing Excise Invoice Reference at Depot

    Hi,
    We are doing an implementation where the customer is currently working in a home grown software.
    During Go-Live, we need to capture/upload the Excise Invoice reference of the existing Excisable Stock lying at the Depot.
    We are uploading cutover stock of all materials programmatically using MB1C transaction. But while uploading Depot Stock, we also need to capture the receiving Excise Invoice number (through which the goods had arrived at the Depot from the Mother Manufacturing Plant), so that during sales from Depot we can pass the excise using J1IJ.
    We have tried the following steps and failed:
    1. Upload inventory for the materials at the depot plant using MB1C.
    2. Using the material document created above, we tried to perform J1IG. (We got stuck here).
    Please suggest the correct process to upload the cutover stock at Depot along with it's excise invoice reference.
    Regards,
    Debarshi

    Hi Ashok,
    After MB1C, when we are trying to execute J1IG with the material document number and then click "Details" button, the new screen asks for internal document number. We click on "More Documents" and manually enter the excise values along with excise invoice details and save.
    This reflects the values in the RG23D and displays in J1IDEPOTSTOCK1 report also.
    But when we try to sell from the Depot and create J1IJ, the uploaded invoice is not getting displayed when we are trying to select it to pass excise value.
    How can this invoice be selected in J1IJ, if we follow this route.
    Is this the correct process or I am making some mistake in the J1IG step.
    Regards,
    Debarshi

  • Import purchase of excisable trading material for depot

    Dear gurus,
    In one of my clients scenario, I have to purchase imported execiasable material from foreign vendor with all the seven excise duties viz CVD,AED,ECS,SCESS, BCD and ECEss and HSECess on BCD.But interesting thing is that he want to inventorised all the excise duties for traded materials .For general import purchase we use ZIMPORT prising and in that only customs duties get inventorised and other CVD,AED,ECS,SCESS duties gets refunded,hence non inventorised.
    My client wants all CVD,AED,ECS,SCESS duties to be posted in respctive excise register for depot and at the same time all the 7 import duties to be inventorised as they are not getting any setoff for that. IF we use same import prising procedure for depot as like that of manufacturing plant, as i said only BCD and ECEss and HSECess on BCD will get inventorised.
    Shall i need to design new prising for depot or new conditions for same import prising?
    Kindly help.

    hi nilesh..
          in depot import purchase, it is not possible to pass entries to RG23D as well as to inventory...
           if u want all the duties to get inventorized u should use no credit/non cenvatable condition type in ur pricing procedure and manually enter that for the respective vendor...
          in this case u cant pass the credit to ur customer...

  • Excise Duty Calculation on Depot for Trading Material

    Hi,
    Following are the details about my client requirement:
    1. My client has a depot plant dealing with trading material and no manufacturing activity.
    2. Present Scenario:
    Material Purchase price: 100
    Excise Duty: 14
    Sec E.D: 2
    Hr.Sec E.D: 1
    Material Sales Price: 200
    Excise Duty: 28
    Sec E.D: 4
    Hr.Sec E.D: 2
    3. Expected Scenario:
    Material Purchase price: 100
    Excise Duty: 14
    Sec E.D: 2
    Hr.Sec E.D: 1
    Material Sales Price: 200
    Excise Duty: 14
    Sec E.D: 2
    Hr.Sec E.D: 1
    For the above the price will be changed at a Condition record level.
    There are no standard functionality available in standard SAP kindly advice on some workaround for the above requirement.
    Thanks in advance.
    Madhan

    Hi Prakash & Sandip,
    Let me thank you for the response. The excise calculation as pointed by you is right. For material price of 100 (BED = 14; SE Cess  = 0.28 & Hr.Sec Edu Cess = 0.14).
    Now my query is when there is a Material price increase in case of trading material Which is 200 (BED = 28; SE Cess = 0.56 & Hr,Sec Cess = 0.28). Presently system calculates Excise duty on 200.
    Since it is a trading material there is no value addition to the material Excise duty should calculate on Rs. 100.
    Is there any workaround available?
    Thanks & Regards
    Madhan Kumar

Maybe you are looking for