Excise Report For Materials

Hi,
I am creating Excise Report for Materails .
My requirement i am creating 3 radio buttons in selection screen.
Functionality of 1 radio button
It displays all the excise details . This is i am getting from Mseg and Mkpf and j_1iexdtl and j_1iexdthr.
It is giving correctly in my report.
Functionality of 2 radio button
If one material came to the plant and again they send to Subcontractor they do not want to show the
original grs no if quantity same .If quantity is not same they want to display remaining quantity.
Here i am showing actual capital taken .
Here i am facing problem when i am delete the record when it is send to subcontractor if it again came from subcontractor I want add it Original Material Document no.
Functionality of 3 radio button
Which entires i am removing from second radio button i want to show in third radio button.
Regards
Nandan.
Edited by: srihari haranandan on May 13, 2009 8:32 AM

Hi,
    In the second radio button you are facing the problem.
    1) move the records to one internal table which you are going to delete from the internal table based on some conditions.
    2) Display the internal table which you collected in the select radiobutton.

Similar Messages

Standard Report for Materials Cost Component Structure - PO Condition Type

Dear experts,
We are using below cost component structure (CCS) for materials:
- Direct materials
- import duty
- import handling
In which, all those above CCS are achieved through below condition type in Purchasing Info Record. When doing the standard cost estimate through costing run, we have successfully grouped all those condition types into their respective CCS. The problem is, while executing the standard report of "result of costing run" (S_ALR_87099930), the sytem groups all those three CCS into CCS "Direct materials" only.
I have tried different standard layouts, but still got no way to show all those CCS separately in the standard report.
Please kindly suggest what approach should i take
Thank you very much
BR, Erwin
@edit
Solved.
Edited by: Erwin Hartono on Nov 16, 2011 9:16 AM

Hi
Check cost elements assigned to structure. For this go to transaction code OKTZ and select your CCS and double click on Assignment Cost Component-Cost element interval.
Srinivas

Z report for materials that are lying as rejected material - sent to vendor

Dear All,
i have to create a report where my client is suppose to generate a report of :
scenario: all materials that are rejected in quality inspection is to be sent back to vendor. now what happens is sometimes 50 materials are rejected in one month and 100 in second month. so total 150 materials should be sent but due to human error 75 materials are not sent. So a complete report of the same of which material were sent and which not .
pl discuss....

Dear Ritesh,
lets simplify, just my client want to see a report of list of materioals that have been rejected and not sent to vendor. I real time scenarios materials get rejected in Q- inspection. Now the rejected materials are sent back to the vendor. What happens is due to human error they kept lying in the plant premises for quite a long time that were supposed to be sent back. So ex: x kg of materials were rejected in the month of june.That means X kg has to ben sent back to the vendor to be rectified. Now if y kg was sent where x>y , that means x-y should be lying in the plant that is not sent . A report for the same.
pl discuss

Standard reports for materials begning,purchase,sale,closing stock

Dear Experts,
Is there any standard report for
Opening stock
Purchase
Sale
Closing stock
in terms of QTY and value for all materials.
regards
RR

Hi
you can use MB5B (with Non hierarchial Display) and MB5L
br, Ajay M

Report for materials

hello there
I have one query
how is it possible to take a report from SAP which can gives me
material number,material description,storage location and material group.
I've tried from zrc_mlsd but can't take the material group.
Also I've tried ZSDMM_LIST_MATERIALS but therer is no storage location.
Any help is appreciated

Hi,
I doubt you will get the whole required details from a single report,
MM60 gives every thing you want other than Storage location,
I suppose you will need to create an Z report for the same,
The tables required will be MARA,MAKT and MARD
Regards
Merwyn

Report for materials and vendor

Hi experts,
I need to take a report and conver to excel for the following
pls give me the tcodes r by means of tables
1 list of material available in a plant
2. List of vendors available in a plant/company
3. List of total stock available in a company for individual material
4. List of open Po.
5. Material mrp type, porg.
By using our regular transaction like MM6o while converting to excel it wont come in correct format.
My client is required in excel sheet.
pls advice
regards
arun

Another way to get those report using SE16
1.Materials avaialble in a plant
Go to SE16 Give Table Name MARC use field name WERKS give your plant & execute
2 List of vendors available in a plant
Go to SE16 Give table name LFA1 use field name WERKS for your plant specific vendor
2-A List of Vendors available for a company code
Go to SE16 Give Table name LFB1 use field name as BUKRS for your company code specific vendor
3 List of total stock available in a company for individual material
Go to SE 16 Give Table name MSEG & choose field BURKES for Company Code Level,WERKS for plant level
4List of Open PO
Go to SE16 Use table name EKKO give table name AUTLF X for delivery completd items & blank for open items.
5.Material MRP Type
Go to SE 16 Use Table name MDMA give field names MRP Type DISMM as field name
Reward if found useful
Vengat

Report for materials sent out side receipt tracking

hi gurus,
I have a requirement that the materials sent outside for subcontraction purposes, after the work completed, should be back with in 180 days, i m not finding any standard report, can any body suggest
to view without any development of report, as we are near to go live.
Thanks in advance.

hi indranil,
ME2o for sending the material outside to subcontractor, and after completion of the job at subcontractor, we are doing jwc reconciliation also there i will get the return date, my question, my client want a pop up within the stipulated time( say one month before) so that he can follow up with the out side party to get deliver the material with in one month.
YOur speedy response is highly appreciated.
regards...

Report for materials which have not been cycle counted.

Hi,
Is there any report which can show me materials which have not been cycle counted and also materials which have been cycle counted with the cc date?
Sincerely,
Nicky

Hi,
As of my knowledge, there is no standard report which can fulfill your requirement. You may go for development. Please check the similar thread: Cycle count analysis report
Regards,
AKPT

Report for materials with shortage (GATP)

Hi,
We are using GATP for the cofirmation process. If you go to the CO09 transaction in the SAP-ERP system, it will take you to an APO screen. There are 2 fields (Receipts and Confirm quantities) on this screen; when Confirm quantities is greater than Receipts it shows that the material has a shortage.
Is there any report in APO that shows me the materials with shortage (Confirm quantities greater than Receipts)?
Thanks a lot

777,
Such info requirements are usually handled with the Alert monitor.
/SAPAPO/AMON_SETTING, create an alert type ATP, Availability check shortage.
http://help.sap.com/saphelp_scm70/helpdata/EN/47/f925c8852f383ce10000000a42189b/frameset.htm
Best Regards,
DB49

Report for Materials' movements related to SUBVENDORS

Dear Experts,
I am searching for a standard report (like MBLB) showing all the materials' movements related to a specific SUBVENDORS. the problem is that MBLB is showing - before the BATCHES the materials is distributed on - and double clicking on the batches the details of all the movements. I'd need a report showing directly all the movements (without showing the batches).
Is there anything by standard?
thanks

MB51 is usually the transaction to run movements reports

Excise report for fields & table

HI, Expert
I want to make a zreport for excise register & also discuss with the ABAPER , he said the functional consultant will provide the fields & tables then i will make the report , can any one tell me where i can find the fields
regards
kumar

Sl.no, Types of doc, No & date of doc, Name of the supplier, Types of Supplier, ECC no of the supplier, date on which input received, value, detail of credit takesn, Cenvat, SED, AED,AED, ADDL, CESS, SHCESS, Description, For the main item in the document

Report for Materials expired with price on Purchase Info Record

Hi Experts,
Can anyone of you advice a report in SAP that can identify the materials where the price has expired on Purchase Info Record.
Thanks in advance.
Regards,
Nagarjun

HI,
ME1P will be used to monitor the changes in terms of pricing conditions you made to your info record via Transaction MEKP.
In case of SA, you will have to build up your simple query by joining two tables A016 and KONP.
Regards
KK

Any Standard Aging report for MM

Hello All,
I am looking a standard aging report for Materials on my storage location.
We are following batch.
Please help
Regards
Lal

Hi ,
I hope for your new requirement this might help you .
If you want to perform an analysis based on the key figure dead stock, proceed as follows:
From the Inventory Controlling menu, select Environment -> Document evaluations-> Dead stock.
1. The selection screen appears.
2. Specify the desired analysis criterion and selection parameters.
You can carry out the analysis for all plants, that is, for each material, data from all plants are grouped together or only for certain plants, that is, the analysis is created for every designated plant. Any period can be selected for the analysis. The system suggests 90 days as the period to analyze, the calculation starting from the current date.
The following functions can be used to process the material list.
Detailed Display
By using the function Detailed display, you can call up in a table or graph form detailed data for a material including the respective material document. You can analyze all material documents that are related to the evaluated stock of a material.
If you want to view detailed information for a certain material, proceed as follows:
Position the cursor on the desired material in the results list and select Edit ->Detailed display.
A dialog box appears in which you can choose either a graph or table display.
If you select the graphic, you can display the latest information on:
     Cumulative receipts/issues
     Warehouse issues
     Warehouse receipts
     Stock level
If you select the table, you can display the following information:
     Stock movements
     Cumulative stock movements
     Current stock level
From the stock movement table you can drill down as far as the material document level to see detailed information. To display stock movements on a particular day, position the cursor on the relevant line and select the Choose function. A popup window appears which displays all the movements on the selected day. The individual movements for a selected date are displayed in a dialog box.
To display the document for a particular movement, position the cursor on the relevant line and select the Choose function. A popup window appears which displays the document.
Similarly you can try for the slow moving also .please let me know wether you were able to find what you were looking for .
source: SAP
cheers
KP

Urgent issue REPORT FOR ALL MATERIAL BASED ON STOC TYPE

Hi
I want report for based on stock type
i want to check the stock for all mterial with stock type "quality inspction"
i want that type of material documents
is it possible to see the report
regards sesidhar

I CREATE material A...with out seleting QM view
I create one more material B.... with select QM view
both r ROH material type..
when i caeate GR for material A. with stoc type 'QYALITY INSPECTION.. for this material system does not creat quality LOT....
when i create GR for material B with stock type 'QYALITY INSPECTION.... for this material system created lot..
but are GR done by 101 movement..
but i want report for materials which are stock type QI...but does not display Material which r lot created...?
is it possible..
regards
sesidhar

Why can't I create a report for standard price by material

Any ideas? All reporting I have tried in SQO1 and even in SE16 returns 0 value for standard prices?
Firstly why is this? and secondly is there another way I can pull a report by material showing standard price?
Points awarded, many thanks

hi,
In MM60, u can get report for materials having standard & moving average price based on ur input in selection screen like material,plant,material type,material group & created by only. As of my knowledge,
there is no option to get list of materials with standard price in std.SAP.
There are two options to generate report for materials with standard price.
1. It is better go for customization . selection screen must contains price control field. if u enter price control like 'S' or 'V' in intial screen , report is generated.
2. create a ABAP query for this.
I hope this info is helpful to u.

Excise Report For Materials

Similar Messages

Maybe you are looking for