Experts please guide me in Sap Abap Hr and in Sap Hr. I have 1 year exp but didn't get job wht to do ?
Dear SAP Experts ,
I Have 1 year exp as an Associate SAP ABAP HR Consultant and i have done MCA but still didn't get any job i am free from 3 months didn't get any call please guide me what to do my abap is not much strong but hr is good . i am so upset tht planing to move in other job profile like SEO or work as HR executive for getting domain knowledge.so plz guide me wht to do and please also tell in ABAP HR which main topics i have to make strong ?
Thanks
Regards,
Vikrant
<<Moderator Message: How many times are you going to ask the same question?>>
Message was edited by: kishan P
Hi Vikrant,
Since you are more interested towards HR than ABAP, in long term you can think of moving into SAP HCM functional career. And to be able to work as a functional consultant, you need to have good amount of business process knowledge. Considering this you can start working in core HR and gain domain experience and move your career later towards functional area.
And more over you have ABAP HR experience,this will be very handy when you are a functional consultant.
Regards,
Ravi
Similar Messages
-
Guide me please in sap abap hr and in sap hr. have 1 year exp did get job wht to do ?
Dear Friends ,
I Have 1 year exp as an Associate SAP ABAP HR Consultant and i have done MCA but still did get any job i am free from 3 months did get any call please guide me what to do my abap is not much strong but hr is good . i am so upset tht planing to move in other job profile like SEO or work as HR executive for getting domain knowledge.so plz guide me wht to do .
thanks
Regards,
VikrantHi Vikrant,
Since you are more interested towards HR than ABAP, in long term you can think of moving into SAP HCM functional career. And to be able to work as a functional consultant, you need to have good amount of business process knowledge. Considering this you can start working in core HR and gain domain experience and move your career later towards functional area.
And more over you have ABAP HR experience,this will be very handy when you are a functional consultant.
Regards,
Ravi -
Idoc b/w sap(r/3) and non sap system .
hi gurus,
how i pass an outbound idoc b/w sap(r/3) and non sap system .
which function module we will use in this scenerio for inbound and outbound idoc both
please guide me with an example .Hi Pawan,
Non SAP system should have RFC adapter in order to receive and send Idocs from/to SAP.
If this is not your case, you should us a Integrator Middelware with RFC and standard adapters like SAP Exchange Infrastructure.
If for example, your non SAP system is able to process data from flat files you can build next interface: SAP send Idocs to middleware that receive them using RFC adapter, middelware maps Idocs into flat file and send it to a one of non SAP system folder using FTP adapter. Non sap system triggers the flat file into its applications.
Reward points if useful.
Roger -
Difference between SAP/APO/DP and the SAP/CRM solution for forecasting
Hi,
Can you please help me identifying the main differences between SAP/APO/DP and the SAP/CRM solution for forecasting? Advantages and disadvantages?
Thanks a lotHi LCD777,
Forecasting at DP & CRM are altogether at different entities. CRM involves webbased data transfer mechanism tool whereas DP is database/livecache driven tool.
In CRM, you dont get optimised solution of forecasting out of it whereas in DP you can get as much as
optimised solution & flexibility as per your requirements.
DP is majorly a forecasting tool where in huge statistical method functionalities are embedded in
whereas CRM is majorly a transactional tool wherein it involves gathering of forecast data and executing it.
Typically, CRM will be integrated with DP containing GATP environment & ECC so that DP will plan for forecast data, ECC system drives sales order data & GATP calls for availability check and finally
the forecast execution& transactions will be controlled by CRM
Regards
R. Senthil Mareeswaran. -
I'm really sorry i just bay my griAddress again to my phone please grindar extra just for one month and you charge me for one year so i would like to cancel that transaction and pay only monthly many thanks marcel
These are user forums. You are not speaking to Apple. We can't assist you. You must contact Apple directly in your country.
Customer Service: Contacting Apple for support and service - this includes international calling numbers. -
I cant download anything including Updates, when i try to download a black box appears saying in 4 different languages that i have to power off the laptop using the button, and it freezes, so i have no option but to power off. Please HELP
Well, at least it's good that there are no hardware issues - that's a relief and one problem area that you can check off.
OK, so let's summarize so I can get a clear picture of what's going on. If you try to download something from your web browser, what happens? What if you try to download a small utility such as "EasyFind" from the App Store? Or is the problem specifically linked to downloading updates?
I'm just trying to get a feel for if anything really means anything?
Usually what you download from, say, a website, goes into your Downloads folder. It's the default folder for things like that. Apps from the App Store are downloaded to your Applications folder. And software updates are generally, I believe, held in a temporary folder so that they can be installed (in many cases) when you're asked to restart.
It could be something as simple as repairing permissions on your start-up disk. You're running Snow Leopard, right? (That's what your profile says.) Try opening Disk Utility from your Utilities folder, selecting your boot disk and try verifying permissions. If you come up with some errors, try repairing permissions. After that, go ahead and verify your boot disk - you won't be able to repair it at this point, but at least you can see if you have any errors.
Let me know about the anything and get back to me after you've verified and repaired permissions and verified your boot drive.
Good luck,
Clinton -
Hi,Please guide me how to choose correct career in SAP r/3 technical side?
Hi, Experts.
I have 2.8 yrs experience in SAP B1 as a techno functional consultant but recently i am learning abap to move r/3 side. after learning abap can i get a job in ABAP or i need to learn any related CRM technical or ABAP-HR, in this which on is the most demand, please guide me in terms of job and future career or can i learn BI ? it's good for my career but iam thinking after getting few years experience in ABAP iam planning to move to BI.but job point of i here it's good openings so can i learn now itself BI ?or CRM technical or ABAP-HR ?please guide me how can take good decision on future career point of and to select good modules in SAP World.
Regards,
Kumar.Have patience to start reading all from - [Re: Scope in SAP B1] ... you'll have the answer if not have it yet.
Please close this thread if answered. -
SAP ABAP (Advanced Business Application Programming) is one of the most sought-after modules of SAP. In accordance with its manifold returns the trend for training of SAP ABAP Online Training is constantly on a sharp upsurge.
In the first phase of the SAP ABAP Online Training the core emphasis is laid upon the general outline of the SAP. To get more specific, the learner is precisely told about the multifarious modules of the SAP ABAP Online Training (just a basic know-how, no detailed analysis). Furthermore the ERP and ABAP review is being presented. Some spotlight is also being flung on the design and database layout etc.
In the next phase, SAP ABAP Online Training is taught in pretty much detailed and comprehensive manner. Learner is being showered with loads of information on data glossary, control reports etc. This phase by large involves much of the programming, reports, tasks, controls, counting, tables and arrangements etc. The student also gets specific knowledge with regard to the avowal of variables. -
My experience of SSO between SAP Portal6.0 and non-Sap Application
Firstly I announce that I am not a Sap developer or a Sap Consultant. I am a Cognos Consultant. I need do SSO between Sap Portal and Cognos Portal in my project, So I have to make SSO between two portals.
I tested SSO between the two products on IIS5 of Windows XP and IIS6 of Windows 2003 and passed.
Step 1: Copy sapsecin.exe and sapsecu.dll on any directory where you want, such as C:PortalSecurity
Then add this directory to your Environment variable PATH. You can find the two files on sapserv<x> under general/misc/security/SAPSECU/<platform>;
Step 2: Copy your Filter ISAPI Files IIS_SSO.dll or IIS6_SSO.dll in any directory where you want, such as C:PortalFilter. You can find this two files on SAP note 442401.
Step 3: Get you verify.pse which is located in
<irj>
ootWEB-INFpluginsportalservicesusermanagementdata and put it on the same directory with your ISAPI Files ,such as C:PortalFilter
(According Sap Support articles , IIS_SSO.dll should be used on IIS 5 and IIS6_SSO should be used on IIS 6,but I can not load IIS_SSO.dll on IIS 5 of Windows XP, I use IIS6_SSO.dll );
Step 4: Create a new file named verify.properties , the content of this file see the appendix A;
Step 5: Load the IIS6_SSO.dll on your IIS. On IIS5, Select Website PropertiesISAPI FilterAdd IIS6_SSO.dll and name it wp . On IIS6,do as such and Create a Web Extensions named wp and allocate file IIS6_SSO.dll. Finally restart the www service.
I
If you can load the filter successfully, you will see the filter color is green.
On IIS6,Maybe you find that you cant load your ISAPI file IIS6_SSO.dll, Its state is unloaded and its color is red. I am confused by this question long time. I finally found you must install some R3 dll files on your system! The .dll files which I mentioned can be found in SAP note 684106, put it in a same directory with your security files, such as C:PortalSecurity and restart your web server.
(The steps above I reference Chris beck s topic)
Step 6: I write an ASP file named headerdumper.asp on my website and create a i-view to show my asp file in SAP Portal. If you succeed, you can see the http header variable<your logon name> in ASP page. If you application can receive http header variables, then Congratulations! You have apply SSO successfully.
If your log file show Can't find MYSAPSSO2 ticket cookie for URI "" on host "", dont worry about it. I am confused by this question long time though. I found the key cause the errors are cross domain or different DNS suffix.
I tested 3 scenarios :
1 if your Sap Portal URL is http://sap-server:50000/irj/protal ,and your asp file is located in http://sap-server:80/headerdumper.asp, You cant access this asp page from i-view . I am sorry that I have no idea about this.
2 if your Sap Portal URL is http://sap-server:50000/irj/protal ,and your asp file is located in http://your-server:80/headerdumper.asp, Your log will show Can't find MYSAPSSO2 ticket cookie for URI "" on host "". because they have no domain name, which is seemed that they meant different domain.
3 you must deploy your asp file and sap portal like below ,So you can apply SSO correctly:
you must access SAP Portal like : http://sap-server.domain.com:50000/irj/portal
you must access your asp file like http://yourserver.domain.com:80/headerdumper.asp
then add your asp file as i-view to your SAP Portal which URL is like above , you can get Http header variable correctly.
I am not an native English speaker, I hope you can understand what I said.
Appendix A The Content of Verfy.properties
remote_user_alias=REMOTE_USER
pse_file=C:PortalFilterverify.pse
application=portal
log_file=C:PortalFilterverfy.log
log_level=3
cache_size= 1000
Appendix B The Code of headerdumper.aspI'd recommend to cross-post your inquiry to the Security
-
Hi,
I am developer and beginner in HR
I found many classes for HR in the repository. I think, the most interesting class for me is
CL_HRBAS_PLAIN_INFOTYPE_ACCESS
because I need to read single infotypes and not all records. The problem is: I found no examples for this class.
Can someone help me further?
Thank you!
Have a nice time!
PatriziaHi Patrizia,
I know this is a bit late but hopefully it still helps.
In short you would be better to use one of the available function modules (e.g. HR_READ_INFOTYPE, HR_INFOTYPE_OPERATION) or to use the PNP logical database statements (GET PERNR, RP_PROVIDE) as Jamie alluded to.
For detailed info on how the HR Infotypes have been implemented using ABAP Objects you can refer to this SAP Library content which explains the decoupled infotype framework
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/a503b963161bbfe10000000a1553f7/frameset.htm">Decoupling Infotypes</a>
For understanding why the HR Infotypes were decoupled you can refer to this SAP Library content introducing concurrent employment:
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/16/08c73c52aacf5be10000000a114084/frameset.htm">Infotype Framework for Concurrent Employment</a>
If you still really want to use ABAP Objects to perform this action then please ignore class CL_HRBAS_PLAIN_INFOTYPE_ACCESS since that is used for PD infotypes only. You can refer to the example code I'm pasting below for reading a PA infotype:
*& Report zptest0002
*& Test program to use the ITF to read infotype 0002 for a person
REPORT zptest0002.
* data declarations
DATA: prelp_tab TYPE hrpad_prelp_tab.
DATA: a_read_infotype TYPE REF TO if_hrpa_read_infotype.
DATA: data_exists TYPE boole_d.
DATA: i_pa0002 TYPE TABLE OF p0002,
wa_pa0002 LIKE p0002.
DATA t_pernr TYPE pernr-pernr.
* supply existing pernr for testing or implement a parameter
t_pernr = 2.
* initiate the infotype framework
CALL METHOD cl_hrpa_masterdata_factory=>get_read_infotype
IMPORTING
read_infotype = a_read_infotype.
CLEAR i_pa0002.
REFRESH i_pa0002.
* perform the read operation
CALL METHOD a_read_infotype->read
EXPORTING
tclas = 'A'
pernr = t_pernr
infty = '0002'
subty = space
objps = space
sprps = if_hrpa_read_infotype=>unlocked
begda = if_hrpa_read_infotype=>low_date
endda = if_hrpa_read_infotype=>high_date
no_auth_check = 'X'
IMPORTING
infotype_tab = prelp_tab
data_exists = data_exists.
* cast prelp return value into infotype structure
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn_tab
EXPORTING
prelp_tab = prelp_tab
IMPORTING
pnnnn_tab = i_pa0002.
* loop to process or get first record
CLEAR wa_pa0002.
READ TABLE i_pa0002 INDEX 1 INTO wa_pa0002.
* write to the screen or perform other operations
WRITE: / 'First name: ', wa_pa0002-vorna.
WRITE: / 'Last name: ' , wa_pa0002-nachn.
Please reward points if you found this helped. ***
regards,
Paul -
SAP Advanced Planner and Optimizer (SAP APO)
Hi Gurus,
Please email me details of APO. I don't have any idea about it and now i have to work on it. I will appreciate any documents and material. My email ID is [email protected]
I look forward for your help.
Thanks
NewBWNewBW
Please see these links
www.service.sap.com/scm
You will find good documentstion about APO over here
BW with APO
APO and BW
Hope this helps
Thnaks
Sat -
Hi I had perches one iphone4 from Hong Kong last month but after coming back i try to restore my iphone but it's give error 3194 then i try to restore it in recovery mode but still can not restore error -1 and now i cannot get out of recovery mode please help me to shovel this problem.
Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.
-
hello i have an blackberry bold 9900 and i was wondering if i could get my contract with o2 transfered onto another sim for iphone 4
Go to an O2 location and they will be able to help you.
They should also be able to take any contacts, etc you
have on the blackberry and get them onto your iPhone.
Or call O2 to set up the new sim and do your own data
transfer. -
so how do i get around the problem of installing itunes
the older version of bonjour could not be removed
Let's see if we can make some progress with that one first.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Can anyone help me to delete photos that were put on my ipad from a lap top computer. I have tried following instructions from another member, but there was no arrow to press by the slideshow - so I was unable to go any further. Appreciate any help, as there are lots of photos.
I am pretty new to Ipad and computers - it's easy to delete photos taken on the Ipad camera - but what do I do on the computer to delete the laptop photos (which a family member put on) I can work my way around a computer OK.
Maybe you are looking for
-
OS Error in starting the OCFS Service on windows server 2008
Hi, Installing the Oracle 11g R1 CRS on windows server 2008 operating system . It is displaying the folllowing error message ERROR : OS in Error in starting the OCFS Service Can any one please tell what could be the issue .. Thank You
-
Time out while activating Data Source
Hi All, I am faced with a problem. I am trying to load a cube from a flat file Data Source. I create the data source and save it, but when i try and activate it...it just keeps running for a long time and gives a timeout error. I have created Info Ob
-
Help get my phone service back please.
Hard to believe that the world's leading telecommunications provider can't fix a noisy land line in 6 months, 6 visits from openreach, multiple bt India support staff promising to take personal ownership, to the last visit leaving me without broadban
-
How to run TCK using Java Card Sun reference model from eclipse
Hi all, can any one help me by giving an idea about running java card TCK using sun reference model from eclipse IDE. Thanks Murali
-
The module has been upgraded to the latest firmware version, before the problem started and several times after the problem has arisen. Field Point 2.0.4 is being used. No power losses have occured to interrupt operation of the module or the network.