Export Data Source Transport Problem

Hi All,
I have IO FI Super Number - did export data source for that and generated 8zfssupno for myself BW system in Dev system.
Used that export DS for another MD Account and created transfer rule.
Now when i try to transport the Request to QA env. the export DS request shows status succesfull but cannt find 8zfssupno DS into QA system and my transfer rule request has been failed to transport.
i collected DS twice but both requests are also not identical.
One has Object Directory Entry -->R3TRISFS8ZFSSUPNOT
and the other one dont.
i can see my export DS in t-code RSA6 also.
Do  i need to transport the main IO FI Super Number before transporting export DS ?
can someone pl. give me the solution ?

the error log:
Extract structure /BIC/CE8ZFSSUPNO is not active                                
The extract structure /BIC/CE8ZFSSUPNO of the DataSource 8ZFSSUPNOT is invalid  
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L        
The errors affect the following components:                                      
<b>Thats means DEV BIW should have conversion mapping with QA BIW as the source system conversion.</b> ---> How to do that ? understood that its for myself BW system so it should be covert to QA from Dev.
Yes, finally i did it manually.  but as u said it should work i can try to transport it to other env. please advise.
Message was edited by:
        Keral Smith

Similar Messages

  • Data Source Transport Problem

    Hi,
    I am trying to transport some BW Objects ( InfoCubes, IO, DTPs, Transformations, Datasources) from my SAP Bw Dev system to some other SAP BW dev system E15 010.
    All the Objects have been correctly transported but the DataSources as well as the connected Transformations are not getting transported.
    Following error is coming:
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Aktivierungsmodus)
    No rule exists
    Source RSDS 0TCT_DS02 T15CLNT100 does not exist
    No rule exists
    Please give me ideas how to solve this problem..
    Thanks and regards
    Pradeep

    Hi Pradeep,
    The datasource & transformations are dependent on the source system. Can you please confirm if this target BW system is connected with the source R/3 system where active datasource exist.
    If this target BW system is connected with some other R/3 system, can you please confirm that before transporting BI requests from one system to other, did you transport transport requests from source R/3 system to target R/3 system.

  • Error While Transporting export Data Source

    Hi Experts,
    We have a requirement to transport a data source from development to quality system through acceptance box.
    We need to transport an export data source which contains 40 fields. But when I captured the data source in development system and transported the same to acceptance box it's displaying only 38 fields. 2 Fields are missing from the data source which are present in development system and also source system of export data source.
    Please suggest how to get these 2 fields in acceptance box.
    Thanks,
    Sachin Motgi

    Hi,
    Check if your data source extract structure is having all 40 fields.
    Save and generate the data source again, replicate and then transport.
    I hope it will help.
    Thanks,
    S

  • Export Data Sources DEV Transport to Acceptance

    Hi Friends I am having a Export Data Source 80VELEXT created in Development System. When I transport that Datasource to Acceptance. It is not getting activated. I checked in RSLOGSYSMAP Table. I do not see the DB4CLNT120 --AB4CLNT110 Check mark. Is it required to be ticked to activate this. But when I consulted MY SAP Basis team  they told it is not required to be checked. They told only D53CLNT120 -- A53CLNT120 ECC - ECC is only required. Please help me how to activate this Export Datasource in Acceptance.
    Thanks
    Soniya Kapoor

    Hi Ravi, Please tell me exact step where you want me to change the source system to your Acceptance system Is it in the table RSLOGSYSMAP. OR where. I just created these datasources IN BI and nothing else is required no dtp no trans nothing. Just the Datasource and  I need to transport this.
    Please help
    Thanks
    Soniya

  • *** Transporting Generated Export Data Source *** urgent issue

    Hi All,
    I have generated export data source from info object Company Code,
    And trying to transport the Export data source, i.e. 8Company_code to QA system.
    Its showing the log that, imported sucessfully, but, i can't see the object in QA.
    Iam currently working on BW 3.5 system.
    Please help.
    Thanks,
    Nisha

    Hi Luis,
    Thanks for this.
    Yes, i went into Transport connector >> choosen the object >> Data flow before >>
    Ticked the Data sources >> changed the Package from $TMP to ZXXX >> Generated Transport request >> Released it >> Transported it.
    But, still can't see....
    Cheers,
    Nisha

  • Problem with delta update on customised export data source.

    Hi all BW gurus,
    I have created several customised export data sources in the R/3 system. And I have made use of the utility program <Z_CHANGE_DELTA_PROCESS> to update the ROOSOURCE table.
    While this can result in being able to do initial update (instead of full update), the subsuquent delta update is not working.
    In RSA7, the datasource is with green light and in RSA3, the extractor can extractor data out of it.
    Does anybody have some idea on this?
    I heard that there is a way to change the Business Transaction Event (BTE), but I don't quite understand how this is performed. And wonder if this is the only way out. To me, the triggering point would be the same, meaning the InfoPackage would be executed, then call the extractors in R/3 to extract the delta update in order to load into the InfoCube.
    And how do others do for executing delta update of the customised data source?
    Thanks a lot!!
    The utility program of <Z_CHANGE_DELTA_PROCESS>:
    =================================================
    report z_change_delta_process .
    *P_DATAS DataSource
    *P_DELTAP Delta Process for DataSource
    parameters:
      p_datas type roosource-oltpsource,
      p_deltap type roosource-delta.
    tables:
      roosource.
    data:
      ls_roosource type roosource.
      if p_datas(2) ne 'Z_'.
       message 'The DataSource needs to begin with ''Z_''.'  type 'E'.
      endif.
    select single * from roosource into ls_roosource
           where oltpsource = p_datas
           and objvers = 'A'.
    if sy-subrc eq 0.
       ls_roosource-delta = p_deltap.
       update roosource from ls_roosource.
    message 'The DataSource has been updated successfully.' type 'I'.
    else.
       message 'The DataSource entered is not valid, try again.' type 'E'.
    endif.

    Doesn't anyone have any idea on this topic?
    Appreciate for all the help. Thanks.

  • Data source - activation problem

    Hello,
    when I try to transport a datasource from the development system to the QA-system I always get the error:
    Syntax error in GP_ERR_RSAPTD1, row 25 (-> long text)
    Message no. RG102
    Diagnosis
    Field '/BIC/CE8CO_PA_02A' is unknown. It is neither in one of the specif
    What could be the problem?
    thanks

    Hi,
    export data sources of InfoCubes are transported with the associated InfoCube, you should not try to transport the export data source separately. Just pick up the cube and transport it, that should sove the problem and the exprot data source should be there, maybe you need to replicate data sources to see it.
    Regards
    Michele

  • Unable to generate "Export data source" for Master data infoobject

    Hi Gurus,
    I'm in BW 3.5
    I need to generate "Export data source" for a master data info object.
    I followed below steps:
        I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
        In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource  was successful"
    Problem:
    Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
    Could anyone please help ????
    Thanks,
    Venkat

    Hi Venkat,
    I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
    However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
    If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
    Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
    -Vikram

  • Data load issue with export data source - BW 3.5

    Hi,
    We are facing issues in loading data with the help of export data source.
    We have created export data source of 0PCA_C01 cube. With the help of this export datasource,  we are loading data to other custom cube. Scenario is working fine in development server.
    But when we transported objects to quality server data is not getting loaded to custom target cube.
    It is extracting zero records.  All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs.  Every object is active but data is not getting extracted.
    RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development.   We are in BW 3.5 with patch level 19.
    Please guide us to resolve the issue.
    Thanks,
    Aditya

    Hi
    Make sure that you have relevant Role & Authorization at Quality/PRS.
    You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
    Hope it helps and clear

  • ERROR WHEN GENERATING EXPORT DATA SOURCE

    Dear Members,
    I am getting an error when generating export data source for Info Cube.  I'm creating an Info Cube based on already existed info cube.  Literally I am copying all the settings of an info cube to new Info Cube.  The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful.  But the problem is when I am generating export data source the following error is occurred.
    Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
    what could be the reason for the error?
    Please let me know.
    Thanks in advance.

    Dear Venkat,
    The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
    Thanks,
    Krish

  • SAP Crystal Reports data source connection problem using sap business one

    Hi,
    I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
    I am trying to create a Crystal report but when I try to configure a new connection it does not work.
    I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
    Our Current SAP related software details are as follows:
    OS: Windows Server 2008
    SAP B1 Version: SAP B1 9 (902001) Patch 9
    SAP Crystal Report Version: 14.0.4.738 RTM
    Database: MS SQL Server 2008 R2
    I have also added some screenshots of the issues.
    Please have a look and let me know if you have any questions or any further clarifications.
    I m eagerly waiting for a quick and positive reply.

    Hi,
    There is problem with SAP Business One date source.
    I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
    So, try to use OLEDB.
    Regards,
    Amrut Sabnis.

  • Creation of the export data source failed

    trying to activate ods but getting this message that the creation of the export data source failed.
    and it also gives message that RFC Connection to source system is damaged===> no metadata upload
    Please can someone help me with this.
    Thanks in advance.
    Michelle

    Hi,
    Check ur source system connection. by going to RSA1-> Source System-> right click and then select check.
    U will get the info about the source system Connection. IF RFC has failed then better be in touch with ur basis.
    Or try restoring ur source system connection by
    Source system-> Restore.
    Its sets all the default conenctions b/n ur systems.
    Once again check the connection now. if it says ok.. then try do the export data source and then assign the data source to info source and then maintain the Update rules..
    Hope this helps-
    Regards-
    MM

  • How to find Info Source for Export Data source in Data Marts node

    Hi
                  I need to load data from ODS to Info Cube. I created the Export Data source for the ODS. I can see the Export Data Source but in the Data Marts node of Info Source i cannot find the Info Source for the Export Data source i created. I replicated Data sources in the BW source system. I also tried to use Insert Lost Nodes from the Context Menu of the InfoSource node but nothing worked. Please let me know what i need to do to see the Info source in the Data Marts.
    Thanks
    Padma

    In the infosource tab in RSA1 - use settings --> display generated objects
    you will be able to see the datamart infosources..

  • Regarding Export Data Source !!!!!

    Hi Gurus,
    i have a requirement to create a export data source in production system for master data infoobject.then i have to replicate it into Development system. The doubt is once this export data source is created in the production system where i can find this? RSA5...or there is some other transaction? and before replicating these export datasource to Developmentsystem, do i need to activate it?( I know there is prefix of 8 in export data source).
    Immediate reply will be appreciated.
    Thanks in advance.
    Regards.
    Agupta

    Hi,
    You can create it> master data InfoObject>rt click>additional function>export data source.Now you can find it in the datasources in the Source System. Go to Source systems and go to Datasource overview for your BW system. You should find the datasource 8****** under BW Datasources-> Business Info Warehouse -> Data Marts -> Data Marts Master Data.
    Regards
    CSM Reddy

  • Help with Enhancing Export Data Source

    Folks,
    I have a scenario where the infocube is used an export data source
    In the data source I realize that the 0customer is not available
    I changed the extract structure of the datasource to include 0customer but I have still not got the 0customer as part of the datasource
    Would appreciate help on how the datasource can be enhanced to include 0customer; pls note that the infocube does have 0customer
    thanks for your time
    regards

    Hi,
    Can you tell me which datasource you are using to extract the value for 0customer from R/3?
    You check the data source for data ( For 0customer) by using the extract checker tcode rsa3.
    You can also check for the datasources in r/3 by uising the tcode rsa6.
    Hope this helps.
    Regards,
    K.Manikandan.

Maybe you are looking for

  • Looking for 2 Product Solutions for eCommerce site created in Muse and published to BC

    Seeking suggestions for 2 separate BC eCommerce website product applications: I have within BC so far about 200 image in the in a folder in the "File Manager" -AND- each image has been optimized as a low-res digital image down-load product (divided a

  • How to determine mime-type of a file using OSB

    I was working on a requirement where in it requires to use FILE/ FTP adapters using OSB or BPEL as solution. The idea is to pick up files from one location to another location for certain legacy platforms. The real issue is, someone can put a JPEG fi

  • Postion of data record in the table control

    Hi all, I am working on a module pool that has a table control which fetches the data from the Transparent table. Suppose there is data in the z-table formed and table control is showing the data record. i want to text boxes besides the table control

  • Adjusting screen resolution in FlashPlayer

    Playing OMPG and the program allows for setting the screen resolution and will not save the set display resolution.  After contacting their support they inform me that the resolution will default to the resolution displayed by FlashPlayer. How do you

  • My camera stopped working in all modes ie facetime skype ect...

    My camera does not work front or back. Sometimes the back camera comes on, but stops quickly. The camera does not work using any application.