Extracting data from R/3 System table

Hi,
Currently, I am reading table data using RFC_READ_TABLE function module. but I want to achieve same thing using the Open hub services. There is so much of information about infoSpoke/open hub etc. But couldn't understand how to specify the target table and the query parameters etc. It would be of great help if somebody can point me to the correct document which describes all the steps.
Thanks,
Kranthi

Hi,
[check this out|http://help.sap.com/saphelp_nw04/helpdata/en/ce/c2463c6796e61ce10000000a114084/frameset.htm].
Siggi

Similar Messages

Error while extracting data from a remote system

Hi,
I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-28000: the account is locked
ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
Thanks

Hi,
IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
Goto St22 see the short dump error msg..
post if there any inf..
Thanks,
Shreya

JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar

HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..

Looking for SAP solution to extract data from the production system

Hello,
we are looking for the SAP standard tool to extract data from the production system and copy it to the development system. It should be as functional as some kind of partial client copy. The data, which we need to replicate is master and transactional data from FI, CO, AA MM and nice to have FS-RI modules. There is a product offered by the IntelliCorp called "Data Management" but we would like to know if SAP offers its own product.
Kind regards,
Krzysztof Murkowski

Hi,
SAP offers a solution called 'Test Data migration Server' or TDMS.
You can access the master guide from the below link:
https://service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006332942006E
Cheers !!
Satya.
PS: Pls reward points if the answer was helpful...Thx.

How to extract data from a remote system

Hi,
I want to extract data from another system and map it with a target table in my local machine. what is the procedure to do that?
I tried to create another module specifying location of that remote system I could extract the table but when I am mapping with the target table I am getting this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_LOCATION_UBN_15
ORA-00604: error occurred at recursive SQL level 1
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from UBNDW@ORACLE_LOCATION_UBN_15
here ORACLE_LOCATION_UBN_15 is the location and UBNDW is the SID for that system
SCOTT is the username I have provided while creating the module
Please help me out with this..
Thanks

Hi Roberto,
thank you for the fast answer. I have read this before but i don't understand the needed steps on the Oracle-System.
Hope anyone can help me...
Thanks
Muammer
Message was edited by:
Muammer Kizilaslan

Performance issue while extracting data from non-APPS schema tables.

Hi,
I have developed an ODBC application to extract data from Oracle E-Business Suite 12 tables.
e.g. I am trying to extract data from HZ_IMP_PARTIES_INT table of Receivables application(Table is in "AR" database schema) using this ODBC application.
The performance of extraction (i.e. number of rows extracted per second) is very low if the table belongs to non-APPS schema. (e.g. HZ_IMP_PARTIES_INT belongs to "AR" database schema)
Now if I create same table (HZ_IMP_PARTIES_INT) with same data in "APPS" schema, the performance of extraction improves a lot. (i.e. the number of rows extracted per second increases a lot) with the same ODBC application.
The "APPS" user is used to connect to the database in both scenarios.
Also note that my ODBC application creates multiple threads and each thread creates its own connection to the database. Each thread extract different data using SQL filter condition.
So, my question is:
Is APPS schema optimized for any data extraction?
I will really appreciate any pointer on this.
Thanks,
Rohit.

Hi,
Is APPS schema optimized for any data extraction? I would say NO as data extraction performance should be the same for all schemas. Do you run "Gather Schema Statistics" concurrent program for ALL schemas on regular basis?
Regards,
Hussein

Extract data from Retai & AFS system

Hi , Guys,
If there are SAP Retail & AFS system with different master data and transactional data , how can I extract master data and transactional data from these two system into SAP BW?
For example , if i want to extract the stock management data , how do I create the two Souce system in BW, both as SAP souce system or not?
Thanks !

Hi Yong,
1. Should I create both systems as SAP source system or not?
Yes, both should be created as SAP source systems.
2. If I want to extract the master data of 0MATERIAL , should I do the extraction job from the two source system with "0LOGSYS" ?
You have to understand the business process of how material master data flows across these two systems with the help of the functional team.
In our scenario, we have not used '0LOGSYS', because the same material code coming from both the systems were one and the same.
3. If I want to extract the transactional data of stock movement data from both systems, which infocube in BI content can I use?
I suggest you implement standard business content ( 0IC_C03, I guess ) and utilize that for one source system ( Say AFS). Copy this cube into Z cube called ZIC_C03 and connect the retail data sources to this cube. If you want to combine stock reporting from both the systems, you can create a multiprovider on top of this.
Thanks,
Krishnan

0CRM_SALES_ACT_1 takes a long time to extract data from CRM5.0 system

Hi Team,
We are having CRM 5.0 and BW 701.
We are extracting data from CRM to BW using extractor 0CRM_SALES_ACT_1 in CRM. But it is taking long time.
Please suggest what can we do to improve the performance.

Hi,
its depend on the data volume its take a time along with CRM server.
during your load time if crm server was busy then it may delay your load.
Need to trigger your load where less burden on servers(CRM/BW).
While triggering before please check available application servers to process your request at SM50.
if this full load and have huge data then please split your loads with selections and load them into bw.
you can increase processing records count and info pack wait time at info pack level.
go to info pack--> menu scheduler--> wait time and datas setting for data transfer.
during your load time ask basis team to keep on eye at T code - SM58(CRM).
Thanks

Pulling/Extracting Data from Multiple SAP Systems - Scripting, ABAP?

Hello All,
I am working as an analyst for a large company that has multiple SAP installations across the world. What I am trying to do is create some global reporting metrics based on data from all of those systems on an ad-hoc basis without having the other units send the data to a central repository. I can receive access to all of the systems but I am unsure how to pull the data. The access to one of the systems I have currently does not allow the use of ABAP or RFC but does allow scripting. If I have a good business case I could ask for ABAP access and RFC as well.
I have researched and read through many posts and articles within the forums but I am yet to find a solution. I have experience in VB, VBA, and MS Access.
Can anyone suggest any ways to move forward?
Thanks!

According to my understanding, you may use vba in your excel or a just vb by programming against rfcsdk(librfc32.dll) or the newly nwrfcsdk, or use jco or nco..., but all these method are based on rfc function call.
You may write a simple abap side data extraction agent, just a function select some table with the data you interest, and then call this function from outside regularly, then you may save the returned table to a csv then bcp to sqlserver(c + batch), or just write to excel sheets(vba).
The simple table read function you may check RFC_READ_TABLE, but it has some limits and are not released. The more functional agent is also can be found from other vendors, eg ms sqlserver2005 kit`s sap adapter...
I do not have idoc or services experience, maybe in that senerio you will find a easier solution.Good luck, you may reach me at <b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo

Extract data from AMPLA to SAP BW

Hi All,
My requirement is to extract data from a Non SAP system called AMPLA (SQL Server 2012) to SAP BI system (7.0). I need to consider possible ways for SAP BI to extract data from Non SAP Systems like DB Connect, UD Connect, Web services etc. Does anyone have experience extracting AMPLA data to SAP BI system successfully and what method is ideal to be used? Also in what form is data usually available in AMPLA source system(tables/views etc)?

Hi Udit
Before that could you refer this SAP Notes for database connection
128126: Database Connect for external tools
1601608: How to access an external SQL Server database
Regards
Sriram

Problem with extract data from R/3 to BW

I want extract data from R/3 system.the problem is when I run the infopackage,I can see the status is yellow In the Monitor and the data can't extract to BW.but in the source system,the job of extracting data has been finished.
(use the Tcode: WE02)the Outbound IDocs and Inbound IDocs are OK，but in the BW system ,I canu2019t see the Inbound IDocs.
In the source system use Tcode: SM50,I can see the process SAPLQOWK is running for a long time and run out system memory.
use Tcode : SM58, I execute LUW, the data can transfer to BW system,but the report SAPLQOWK is not stop.
it would be stopped by canceling the process manually in operating system or it run out time.
why can't i extract data from R/3 system successfully ?
why the process SAPLQOWK can't finish?
how can i do?

Hi,
I hope the note 527481 would help you to sort out this problem.
Regards,
Anil Kumar Sharma .P

Error when extracting data from ETL - Missing messages and missing InfoIdoc

Hi All,
We are using BW 3.0 and extracting data from other source systems through Informatica Powercenter (ETL). The system is working fine but when we try to extract data on 31st Dec , we get the following error. Only this load gives the error and all the other load to other data targets are going fine. All the data are one-to-one mapped from ETL to BW.
Error messages from Monitor -Status tab:-
   "InfoIdocs missing; external system
   Diagnosis :- InfoIDocs are missing. The IDocs are created in BW with non-SAP systems as source
   systems that transfer the data and metadata to BW using BAPIs. Since the IDocs are missing, a
   short dump in BW probably occurred.
   System response: No selection information arrived from the source system"
Error messages from Monitor -Details tab:-
    Missing message: Number of sent records,   Missing message: Selection completed
Highly appretiate your suggestions.
Vinod.CH

Hi Rathy Moorthy,
Thank you very much for your reply. The source system connections are OK and we are able to load data to other Data targets from ETL, we have issue only with this this particular load. The load extracts data and I have loaded the data from ETL to PSA and have checked the data content and it is correct. But when I update the same data to the target I get this error. I have also tried to update from PSA to target and also directly from ETL to target.
Appretiate your suggestions.

SSIS 2014 - Best way to use parameters to extract data from sources

Hi,
Is there any way besides SQL COMMAND FROM VARIABLE that I could use to extract data from Oracle \ SQL Server tables that filters the amount of data?
For instance, I want to extract in all sources data beyond 2007 so I wanted to use this year as a parameter in all OLEDB sources I will be using.
Thank you

Hi Pedro,
Based on my research, the Microsoft OLE DB provider for Oracle and Oracle Provider for OLEDB does not allow parameterized queries in OLE DB Source. So the best method to achieve your requirement is still using SQL COMMAND FROM VARIABLE option as Data access
mode.
Considering construct your query in a variable which you can include your parameter dynamically with another variable and set the variable properties "EvaluateAsExpression" to true. In the Expression Property set the value to:
"select * from test
where Col1='" + (DT_WSTR,100) @[User::para] +"'"
The following two similar threads are for your references:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/97f23ef5-35ac-466e-87d9-69edac2525f9/ssis-oledb-source-problem
https://social.msdn.microsoft.com/forums/sqlserver/en-US/32a70752-adab-4180-8b6d-f6100b3e356c/pass-variable-for-ole-db-source-with-connection-to-oracle
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Unable to extract data from an AS/400 system.

Hello experts.
We are trying to extract data from an AS/400 system but not having any success until now.
I´ll write down you the stepts that we have followed until now:
1.- Create a DB Connect between both systems
2.- Create a Source System from AS400 in the workbench under DB Connect Directory
3.- Generate datasources from tebles specified in the schema of the connection
break point -
At this point, we had a problem with some tables with at least one fieldname containing character "Ñ".
After asking some possible solutions to SAP, the told us this is not supported, as the system can´t have any object with character "Ñ", so the transfer structure was unable to activate with this fields in the datasource.
--- end of brek point --
4.- After those issues, we´ve decided to implement, in another schema, views from those tables which had the fieldnames with that character "Ñ", changing them to an "N".
5.- We´ve created another source system with that schema, and user than can see that schema.
6.- To be able to see those views, in transaction RSDBC, we had to deactivate the two checkboxes in the first window ( Choose tables and Choose views) .
7.- Right afeter, we could generate correctly the datasources from this logical tables.
8.- We have designed the hole dataflow for this datasources and everithing went rigth.
9.- But wen we tried to execute the infopackage to extract data from those logic tables, we cannot get any registers. Acctualy the charge remains yellow after the job have finished.
Please, I would appreciate any help you could give us on this problem.
Thank you very much
Regards
Joaquin

I´d like ti add something to this thread, and maybe clarify a littel bit the question.
The only way that the BW system recognizes those logical tables, through transaction RSDBC is checking out the two boxes on this transaction, "Select Tables" and "Select Views".
I don´t know haw these logical tables have been created, bus does this mean that the are not neither tables or views as BW understand them.
Please, if someone knows anythin about this, answer to this thread.
Thank you very much.
Joaquin Sobrido

How can I join 3 tables while extracting data from SAP R/3?

I have 3 tables with the following columns
Emp table (emp)
emp_id
emp_name
emp_add
Dept table (dept)
dept_id
dept_name
dept_loc
Location table (loc)
loc_id
loc_name
Now. If I want to select data from loc_id = 10 and emp_id between 2000 and 3000
How to join these three tables while extracting data from R/3
join condition
loc.loc_id = dept.loc_id
and dept.dept_id = emp.dept_id
and loc.loc_id =10
and emp.emp_id between 2000 and 3000.
Could any one let me know the procedure to extract this data into BW system.

Hi,
shouldn't your join condition be:
loc.loc_id = dept.DEPT_LOC
and dept.dept_id = ??
If you can join the three tables then create a generic datasource (RSO) based on a view (create your view with your join in SE11).
Enable the loc_id and the emp_id as selectable in the datasource so you can then select the values from a BW IPack.
hope this helps...
Olivier.

Extracting data from R/3 System table

Similar Messages

Maybe you are looking for