FA Mass Transfer

Hi
I am using FA_TRANSFER_PUB.DO_TRANSFER for mass transfer, but i need to pass the quantity while doing the FA Transfer, Can you pls let me know which parameter to be used for the qty.
Regards
Yram

You will need to use l_asset_dist_tbl(n).transaction_units for this..
The variable is passed to the API FA_TRANSFER_PUB.do_transfer(
p_api_version => 1.0,
p_init_msg_list => FND_API.G_FALSE,
p_commit => FND_API.G_FALSE,
p_validation_level =>FND_API.G_VALID_LEVEL_FULL,
p_calling_fn => NULL,
x_return_status => l_return_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
px_trans_rec => l_trans_rec,
px_asset_hdr_rec => l_asset_hdr_rec,
px_asset_dist_tbl => l_asset_dist_tbl);

Similar Messages

SOP to Demand Management - Mass Transfer -RMCA0766 - Program does not exist

Dear Experts,
I am configuring the mass transfer from SOP to Demand Management. I want to maintain the variant for the program RMCA0766 so that I can create the Mass transfer job.
But I get the message RMCA0766 does not exist. So, How do I generate this program in the client?
Any help would be greatly appreciated.
Reagrds
Tom

Hi,
Please refer the below document. It speaks about the mass processing on SOP.
http://help.sap.com/bestpractices/BBLibrary/documentation/M06_BPP_22_EN_NO.doc
Hope you will get the answer you needed.
Regards,
Manimaran M.
Edited by: M Manimaran on Aug 9, 2011 8:01 AM

Mass transfer for asset categories

Hi,
We are implementing FA (on 11i release) in an organization. This organization is divided on 20 cost centers.
The requirement is that each cost center have its own balance sheet.
Related to FA, I need Asset cost account and Asset expense account to be detailed also on CC level. There are 4 types of assets (which are registered in 4 different natural accounts)
I have implemented by:
Create one book for all the organization.
Create one category for each type of asset and each CC (in total 80 categories).
So the registration of "asset cost" account on asset categories window looks:
Assets belonging for the first cost center:
01-CC1-1111-00
01-CC1-2222-00
01-CC1-3333-00
01-CC1-4444-00
Assets belonging to the 2nd CC:
01-CC2-1111-00
01-CC2-2222-00
01-CC2-3333-00
01-CC2-4444-00
and so on.
All categories are linked to the same book.
When I transfer a big number of assets from one CC into another, mass transfer program allows only transfer between expense accounts, location and employee name. It does not allow transfer from one category into another.
Please advice how mass transfer from one category into another can be implemented.
Thank you.

Hi
You need to perform mass reclassifications for the same which is done at the book level.
In the Asset to reclass section you will populate the details of the asset numbers and the existing category information
In the Reclass section provide the details of the future category information.
Thereafter click on the preview button to preview the selection of assets found eligible for reclassification based on the input criteria entered, once you are satisfied with the output, run the mass reclassification program to bring the category transfer in effect.
Hope this helps.
Thanks
Manish Jain

Asset Mass Transfer

Hi All,
Anyone know how to do asset mass transfer as following :
1. Asset transfer within company code (from cost center to another cost center )
2. Asset transfer between different company code.
Thank You
Alex Lee
Edited by: Alex Lee on May 31, 2010 10:48 PM

Hi,
We can do mass transfer with in company code by selection option "Multiple assets" in menu(T.code - ABUMN).
Thanks & Best Regards,
M.Ganesan

Mass transfer for AUC to Fixed assets

Hi,
I would like to do a mass transfer from AUC assets to fixed assets. 900 new fixed assets have been created. However, the AUC settlement to 900 assets are very tedious. Are there any batch processing available for this ?
Or can I use via LSMW ?
Thanks.
Angel.

Hi,
Prepare an excel sheet with columns as shown in the settlement rules screen and then paste it into settle rules screen.
I hope this can be done.
Thanks,
Srinu

Ejecting from mass transfer

Usually after i transfer files using usb mass transfer, i always get a warning on the phone that says data may be lost if i don't disconnect it properly, even though i ejected the phone via the hardware icon in the system tray. Why is this so?

07-Feb-2008 09:31 AM
babdi wrote:
The proper way should be to stop the device and disconnect the hardware after "It is safe to remove the hardware" pops up.
The system allocates and mounts a logical drive ( Phone in this instance ). Pulling off the cable can result in data loss and system hang; hence this warning
Well, if buffering is enabled than yes. But it's disabled by default in XP for flash drives so there is no need for 'ejecting'.

Inventory Mass Transfer

Normally, we do inventory transfer from one warehosue to another warehosue under Inventory > Inventory Transactions > Inventory transfer. This is fine for a handful of items.
On an annual basis, we'd need to perform mass transfer of ALL items between warehouses. It's impossible to do it one by one. What is the query that I can use to perform this task? Many Thanks.

Gordon,
Please confirm my following procedure to mass transfer ALL inventory items from warehouse A to B:
- Run a query to extract all inventory items from warehouse A
SELECT T0.[ItemCode], T0.[WhsCode], T0.[OnHand] FROM OITW T0 WHERE T0.[WhsCode] = 'A'
Once I have the output, I will populate the data into DTW item transfer template to show the following:
- Warehouse A QTY = 0 (all items)
- Warehouse B QTY = whatever the item shows in the query output.

Mass Transfer of Fixed Assets through Backend

Hi All,
I would like to know how Mass Transaction Number in the Mass Transfer Form gets generated...can it be done similarly through submitting request from backend...
I have observed that when we press the preview button on the Mass Transfers form it generates with the sequence of Mass transfer id and gets populated into the FA_MASS_TRANSFERS table...
Can we acheive this through the backend?

Actually,all I want to know is how the FA_MASS_TRANSFERS is being updated/inserted...If any one could answer this question I guess I can take it from there..I looked everywhere the form and also the report could not find a clue..

Mass Transfer from SOP to LTP

Dear Experts,
Is there a way to mass transfer the data from SOP to LTP for all materials in a plant in one step?
Please explain.
Regards
Tom

Hi Tom,
I guess that when you say transfer from SOP to LTP you mean that in SOP you create Planned independent requirements, that in the operative planning cycle you normally transfer to Demand Management.
In the case when you want to transfer those PIRs to LTP, just transfer them to a non active version of Demand Management, and include that version in the definition of your LTP planning scenario.
Regards,
Mario

Mass transfer of sales person accounts,contacts ,transactions to another

Hello All
in CRM2007, is it possible to transfer Acounts/Contacts/Leads and Opportunities from one Sales employee to another Sales employee and if YES,
How it can be done for Mass tranfer
Regards
Kumar

Hi Phani!
May be you should check for SAP Notes.
In our case we were need only to transfer contacts & some other data,
but because of mass cleansing we did a Z-development (to make it faster than standard & to fo some special cleansing).
You can make some mix I think:
Step 1. Use development (based on FM 'BAPI_BUSPROCESSND_CHANGEMULTI') for Accounts cleansing.
Step 2. Continue with standard cleansing routine.
Hope it helps.
Best regards,
Alexander Kirillov

Automator (or anything) to mass transfer one file at a time, or skip over corrupted files?

I'm currently recovering files (using Disk Warrior) from a failing hard drive, but when OS X hits a corrupted file ("Error -36"), it cancels the entire transfer, rather than skipping over it. Basically, I have to transfer one file at a time, which, on a 2TB hard drive, is going to be insanely tedious, so I was wondering if there's an automation that can transfer one file at a time, or some other way to transfer files that won't stop mid-process?

in my experience, people who know enough unix to understand what you suggested rarely ask questions about automator. Auto-mechanics don't generally need advice on choosing an auto repair shop.
Applescript is probably the easiest way to go with this. I don't know what the file structure of the recovered documents is, but in general you'd run something like this:
set sourceFolderPath to "/path/to/recovered items folder/"
set destinationFolderPath to "/path/to/destination folder/"
tell application "System Events"
          set theFiles to files of folder sourceFolderPath
          repeat with thisFile in theFiles
                    try
-- move files one-by-one in an error block
                              move thisFile to folder sourceFolderPath
                    on error
-- you can put something here to log the skipped files or display a dialog, if you like
                    end try
          end repeat
end tell

Mass Transfer Posting From Quality Stock to Return Stock with FI Effect

Dear Gurus,
1 Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Thanks & Regards
Darvesh

Hi Shoib,
Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Sol: 1 ans is No. You Can not transfer a 1500 material from quality to unrestricted stock, Cause the Transfer of material is based on Either PO or material doument
If you still want to do it Chek with your ABAper to develop a BDC wich can transfer the material and or each PO it should crreate a Accounting Document

Mass Transfer

Good day to all,
I have a situation where where the Warehouse manager wants all material in storage bin starting with F except the materials starting wiht 187 or 3 to be transferred to a different G/l acount, currently all these materials are sitting in a trading goods account along with a lot of other materials.
The warehouse person will put all these materilas on an excell sheet and then i will have to put them in the new account.
How do i go about it? I have to then find all the accounting entries for those materials which the WM person gives me, how do i find all those entries? i guess i will need to use CATTS and transfer everything rite?
Can i setup a program (ABAP) and do this?
Please advice
Thanks,
Zaid

Hi ,
You can setup abap program - bdc program to do this.
Take the help of Abap consultant , take him thru the activities you do . Most of the activities can be programmed and scheduled in the background , as the data in already residing in the R/3.
U need to give the requisite table information to pick up the data .
Regards
Balaji

Mass addition transfer

Hello,
What are the conditions to transfer items to FA?
Is that the combination that have same category in FA?
If the line in distribution in AP is matched to PO and has an item that defined "Fixed asset" - it will transfer to FA ?
thanks,
Kobi Idah

For doing the Mass Transfer in Fixed Assets the following conditions is to be met.
a) Define the Asset Category for that Asset.
b) If it is matched to PO, then in the Charge account you need to choose the Asset Clearing Account only.
c) When the Invoice been matched to Purchase Order, make ensure from the Show->Field-> Track as Asset need to be enabled otherwise the payables distributions will not be identified as a 'Asset'.
d) Validate an Invoice
e) Account an Invoice.
f) Payable Transfer to General Ledger.- Report Need to be run.
g) Run the Report
-- Mass Addition Create
-- Mass Addition Create Report.
Navigate to Fixed Asset Module.
Go to Prepare Mass Addition.
Query with your asset book / Invoice Number.
Change the status from Queue to Post.
Go to Post Mass Addition.
Choose your Asset Book and submit the concurrent.
Make ensure these concurrents should complete Normal.
I have also mentioned the Accountign entries at different stages--
In Purchasing Module
Expense accural a/c Dr
Asset Clearing a/c.
In Payables Module
Asset Cost a/c
To Liability
In Fixed Assets Module
Asset Clearing a/c
To Asset Cost

Generic Table Control in ABUMN for multiple transfer of assets

Hi Experts,
Problem Description
We are trying to use transaction ABUMN for multiple asset transfer.
We need to transfer more than one assets to multiple assets by quantity
and value.
Our Efforts/Observation
Instead of going ahead with BDC/LSMW, we tried using table control to utilize standard SAP functionality.
For making this happen, we are trying to use the Generic Table control which is available in ABUMN once you click on "Multiple assets" button.
However, even though we are making fields like
EL7, EL8 etc available in the screen (by removing check from the "Invisible" check box), they are in display mode and are not giving me any option to select quantity and value that needs to be transferred from each asset.
We need to assign these fields to some field like quantity/percentage so that they can be used.
If you see, the column header is also blank.
We need to transfer hundreds of assets, hence requesting you to please
fix this urgently so that we can transfer assets and close the quarter.
Thanks in advance for your help and support,
Nitish Gupta
+919867458892

Hi Nitish,
I'm sorry, transaction ABUMN will never get this functionality you requested.
For mass transfer, customers have the possibilities to use batch input on transaction ABUM or BAPI.
Please refer customer to the following note :   216806 New posting transactions and batch input
regards Bernhard

FA Mass Transfer

Similar Messages

Maybe you are looking for