Fail the message in PI, on validation failure

Hi all,
We are working on PI 7.4 SP07 single stack system.
For a particular interface (File(FTP)-->PI-->ABAP Proxy) the requirement is to fail the message in PI and raise an alert if the value for a specific field (say BatchID) in the source file is maintained in lower case.
What is the best way to achieve this requirement.
Please share your thoughts and inputs.
regards,
Younus

Hi Yonus,
I would recommend the below option rather than failing the mapping in PI .
Check the condition and notify to Business for condition failure .So that they can correct the file and places again
1)Use the Enhanced Receiver Determination and check the condition based on this open either mail or ECC Business component/Business system.
2)Create 2 mappings one for mail and other for ABAP Proxy communication.
There is also an option to fail @ mapping level by throwing a custom exception .
throw new StreamTransformationException("$$$BatchID field value is in lower case$$$");
Regards
Venkat

Similar Messages

  • When logging in to Icloud I get the message 'Apple ID' is valid but is not an Icloud Account.  I have changed passord but still get the same message.

    I have just set up Icloud and backed up files to it. I have not been able to log in.  I get the message 'Apple ID is valid but is not an Icloud account.  I have the same User ID for Icloud and Apple but different passwords.  Neither combinations work.  I have reset passwords twice but get the same result.

    You cannot set up an iCloud account on Windows - is that where you tried to do it? The error message you quote is what happens when, having an Apple ID, you attempt to use it on Windows to create an iCloud account. You can create an iCloud account on a Mac or an iOS device, then you can sign into it in the Windows Control Panel. None of this should have any effect in the iTunes Store (the forum for which is where you have posted).

  • Outlook 2013 Changing Shared Calendar Appointment Categories causes error The Operation failed the messaging interfaces have returned an unknown error

    Hi
    Our user used to be able to change the categories in a shared outlook calendar appointment but is now getting the error:
    The Operation failed the messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
    We have tried re-creating the mail profile but still get the same error.
    If anyone has any other suggestions, that would be great, thanks.

    Glad to hear that it works fine in new profile. It seems your old OST file or other file in profile is corrupted. After you create a new profile, Outlook would re-sync your mailbox to a totally new OST as the data file.
    Tony Chen
    TechNet Community Support

  • HT3275 My back ups are failing, the message I receive is "The backup disk image "/Volumes/Mamma and Pappa's Time Caps-1/Liz Giusti's MacBook Pro.sparsebundle" is already in use. Any suggestions

    My back ups are failing, the message I receive is "The backup disk image "/Volumes/Mamma and Pappa's Time Caps-1/Liz Giusti’s MacBook Pro.sparsebundle” is already in use. Any suggestions?
    I am trying to back up my Macbook Pro to a time capsule attached to my iMac. When I first installed the Time Capsule, all backups went well.

    Reboot the TC.. it has got lost.. or reboot the whole network.. restart in correct order. .modem router.. TC.. clients.
    It suddenly will reappear.. you might need to reboot it again in a few days. .such is apple software today.
    Some more info C12. http://pondini.org/TM/Troubleshooting.html

  • Change the Message class (OB28) for validations

    Hi Experts,
    I was trying to change the Message class (OB28) for validations which are created last 1 year ago, as we have two Validations where each validation has 15 to 16 steps in it. One validation starts with Y & another with Z.  Both are using the same message class as of now.
    But we want to use different message class for validation which starts from Z.  We tried changing from program RGUGBR28 but it will change the message class for the both validation which starts from Y & Z, we need to change to only one validation.
    Please let me know any way out for this.
    Thanks & regards,
    Shilpa

    Hi Shilpa,
    The message class during the maintenance of a validation, it is not changeable because the message class is not attached at the individual validation but at the entire validation class, that is a combination of application and call time.
    During the first creation of a validation at the moment of "document line item" in application "cost accounting" the message class is asked for and these then for the entire validation class, stored in this case "001" in the table GB02C and from now is no more changeable.
    The reason for that is, that a change affects all validation of a grade just globally and that even cross-client, since the GB02C is not client-specific.
    I hope this helps.
    Regards
    Ravinagh Boni

  • HT4528 IPHONE 5 gets the message "invalid sim" and "sim failure" - how do I fix this?

    I keep getting the message: "sim failure" or "invalid sim". I have a not changed anything on the phone other that adding the recent update. How do I fix this?

    If  that doesn't work, you can just take out the sim and put it back in. To take it out, you put a paperclip into the small hole on the right side of you iphone. Press it in and the sim will eject. Then just press it back in once removed. Hope this helps.

  • OSS1 connection failed ,the message means local saprouter timeout

    When we testing connection by OSS1, we didn't logon the SAPNet. the error detail means my local saprouter is timeout. But I don't what wrong with my saprouter. becasue we use SM59 to test SAPOSS or SDCC_OSS,the connetion test are all ok.

    hello,
    pls check if the process saprouter is started on operating system level. If not
    you can start it from operating system level. Please use saprouter -help to find
    out the syntax. You can see as well in your saprouttab if you specified
    the proper connection settings / permits.
    Hope this helps.
    KR,
    andreas

  • Unable to print: server failed is the message.  Any ideas?  My internet connection is fine

    Printer worked fine yesterday!  Today it says 'Job printing on server -  waiting for printer to become available' .  Network Diagnostics says there is a working internet connection but it cannot find the Epson Stylus Office BX305@my iMac address.  Any ideas?

    The Network Diagnostics shows a green light for Ethernet, Network Settings, ISP and Internet but the Server is red and says Failed:  the Message reads 'This computer appears to have a working Internet connection, but cannot find "EPSON".  You may have typed the address incorrectly." (Not aware of having typed any address, correctly or otherwise, and it was working fine until now!  The ? button says:
    Can’t connect to the server you’re looking for
    Network Diagnostics has determined that your Internet connection appears to be working and can connect to the Internet, but can’t connect to the server you are looking for. There may be something wrong with the server you are trying to reach.
    Wait a few minutes and then try again.
    If you continue to have problems, contact your Internet service provider.
    Is that the problem do you think?

  • Re-trigger failed proxy message after certain time automatically in CRM

    Hi experts,
    Can anyone tell me if we can automate the process of re-triggering failed proxy messages in SAP CRM sxmb_moni, say after a certain period of time.
    Thanks
    Swapna .

    Hi Gigi,
    As stated in one of the blog (/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically):
    For automatic qRfc failure recovery, Schedule the report RSQIWKEX to run periodically. This report enables automatically resets the queues.
    Also, refer the following threads for more information on this topic:
    Re-Process failed XI Messages Automatically
    /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm

  • Check the message processing

    HI.
    I want to catch the status whether message is processing or not on Adapter Enging and Integration Engine.
    Offcource we could know the status , to logon the RWB.
    But I want to check from scheduled scripts.
    If the message  finished processing the message , job scheduler start the next job...
    regards,

    Hii
    You configure CCMS monitoring :
    XI : Configuring CCMS Monitoring for XI- Part I
    CCMS Rule Based Monitors configuration guide for Dummies
    Event Log Monitoring using CCMS Agents
    Configuring CCMS Alerts for the Adapter Engine
    If processing of a message on the Adapter Engine fails, the message state is changed to faulty. To notify administrators immediately of such processing failures, they can be propagated as alerts to CCMS. As CCMS is the SAP standard interface to third-party monitoring tools, these failure events may also become visible in non-SAP monitoring tools.
    Configuration Steps
    To make use of Adapter Engine alerts, you must configure the connection to CCMS as follows:
    1. Make sure that the J2EE engine on which the Adapter Engine is running is configured to be monitored by the central CCMS system.
    To do so, execute transaction RZ20 on your central monitor server. There, the J2EE engine should be visible in the CCMS monitor under SAP J2EE Monitor Templates All Systems. If not, follow the steps described in Chapter 4.2 of the Supportability Setup Guide for SAP NetWeaver 04 on SAP Service Marketplace at service.sap.com/nw04operation.
    2. Check whether the Adapter Engine is configured to report errors to CCMS.
    To do so, start the Visual Administrator and select service SAP XI AF Core. The value of property CCMSEnabled must be set to true (in lower case letters). If it is not, change the property value to true and restart the service.
    To verify that the setting is effective, select the Visual Administrator Monitoring service. Under Root Applications, you should see a node for the Adapter Engine.
    Alerting
    Once you have performed the configuration steps in the previous section, errors that occur during message processing in the Adapter Engine should show up in both the Visual Administrator of the J2EE engine on which the Adapter Engine runs, and transaction RZ20 on the central monitor server:
    Open the Visual Administrator and select the Monitoring service.
    Here you should see that the number of errors of the appropriate error category and error code increases when messages fail on the Adapter Engine.
    Execute transaction RZ20 on the central monitor server and select the Exchange Infrastructure monitor.
    You should find a node for the Adapter Engine here and see the same error information as in the Visual Administrator.
    Accuracy
    The default polling period for the monitor is 30 minutes. If you want to have shorter polling periods, you can change them in the Visual Administrator as follows:
    1. Select the Monitoring service.
    2. Select an arbitrary Number of errors entry in the monitoring tree of the Adapter Engine (leaf node).
    3. Choose Configuration in the right-hand pane.
    4. Choose Edit in the dialog box that appears.
    5. Change the polling period to 5 minutes, for instance.
    6. Choose Save and wait until saving is finished (be patient, since this may take a while).
    7. Select the Configuration Adapter service.
    8. On the Display Configuration tab page, select apps sap.com com.sap.aii.af.app Monitoring Configurator monitor-configuration.xml.
    9. In the xml file, change the polled-by-template period to the same value as above, for example, 5 minutes.
    10. Choose OK to save the modified xml file.
    11. Restart the Monitoring service to apply the changes.

  • ORA-29024: Certificate validation failure when trying to redirect to https

    Hi, I was trying to redirect the page to another https website using utl_http.request,
    I configured Oracle wallet and import the certificate, and successfully to get the webpage content in sqlplus by
    select utl_http.request('https://<website>,null,<wallet>,<wallet password>) from dual,
    but when I trying to use the same way in a button process of Apex, the error ORA-29024: Certificate validation failure prompt.
    Anyone know what wrong with it?
    Thanks
    Vincent Pek

    Hi, Sorry, I found that after i reboot my laptop , it's working now.

  • How to fail a message based on payload?

    Hi Experts,
    Currently Iu2019m working on IDOC2JDBC scenario wherein the customer master details needs to be send from CRM system to Oracle system. My question is there are two fields at source side Postal code and Tax and my requirement is, if any of these two fields are initial (doesn't contain any value) then the message should fail in XI? I mean the message shouldn't go to Target system. Can I achieve this functionality in XI or at R/3 side? If yes please let me know the method or procedure by which the above functionality can be achieved? Do I need to fail the message at mapping level?
    Your help is highly appreciated
    Rgds
    Faisal

    Faisal,
    if any of these two fields are initial (doesn't contain any value) then the message should fail in XI? I mean the message shouldn't go to Target system.
    These are two different things - do you want the message to fail in PI or you don't want to create the target message if the condition fails?
    If you want the message to fail in PI - write an UDF and can raise an exception / create email notifications.
    If you don't want to create the target structure, you can use "if-else" condition / UDF / createif function.
    Regards,
    Neetesh

  • Translation of message class used in validation

    Hi all,
    we are having troubles with the translation of the message class(es) used in validation. In our system environment, we have 2 development clients. One has logon language german, the other italian. Both clients are allowed to maintain their own customizing and with this add new messages to the message class used for validation, if necessary. Now, what happens is this: Whenever a message is added, the original language of the message class is switched to the logon language of the current user. This is nasty because after changing the original language we have to confirm the translation of every message in the message class. How do you organize translation of the message class used in validation?
    Thanks for your ideas, kind regards, Kathrin.

    Hello Kathrin,
    Don't change the Original Langague. Maintain the new messages in the Original Langauge of the Message class and translate to the desired langague.
    Vasanth

  • During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

    I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
    Issues 1) playbook wont connect to desktop manager anymore 
    2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account. 
    3) my Phone when connected to desk top software shows the calendar as read only
    4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies." 
    I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!! 
    someone please help me. !! 
    I know you are going to ask I have updated everything last time and it is all as update as it can get. 
    As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts 

    Did you try to eboot the your PC or laptop where your device is connected ?
    I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

  • How to get the handle of the Validation Failure Message Popups.

    Hi,
    I'm using Jdev 11.1.2.0
    I have added validation rule(less than system date) and failuremessage("date should not after currentdate") on the date field in EO.
    when I enter greated than the sysdate in date field in page, I'm getting validation failure message in a popup with ok button. its working good.
    but when i click on the popup ok button, the focus should go the date field again and it is higlighted.
    So, how to get the handle of the popup's ok buton? and how to highlight the datefield after clicking the popup's ok button?
    Any suggestion would be appreciated.
    thank you.

    if i understood correclty means,
    i hope that, error popup is provided by framework.. how could be possible? to catch the error popup ok button.
    am not well aware of catching the error popup which is provide by framework..
    but i had answer for your part of the question,
    if the condition go off false means you force the cursor into date field. this is can be done using 'javascript'. unless using script you can't do that. ADF doesnt provide any force focusing feature.
    please google how to focus the field.
    https://blogs.oracle.com/jdevotnharvest/entry/how_to_programmatically_set_focus
    http://technology.amis.nl/2008/01/04/adf-11g-rich-faces-focus-on-field-after-button-press-or-ppr-including-javascript-in-ppr-response-and-clientlisteners-client-side-programming-in-adf-faces-rich-client-components-part-2/
    http://lspatil25.blogspot.in/2012/04/adf-default-cursorfocus-to-input-field.html
    http://donatas.nicequestion.com/2012/04/component-to-set-initial-focus-in-adf.html

Maybe you are looking for