Failover mode and JClient.

Does Failover mode impace in a JClient app (both 2 and 3 tier) ?
Tks
Tullio

I need to deploy in both 2 and 3 tier the same JClient app.
What I need to know what's the better setting (if any) and what changes using that feature.
Tks
Tullio

Similar Messages

FWSM 4.0: switch from active/standby to active/active failover mode

Hello,
I have a pair of FWSM's running version 4.0 currently in active/standby failover mode, and I'd like to switch them to be active/active. Is there a documented procedure for doing this? What are the implications for any contexts switched to be primary on the FWSM that is currently acting as a standby (i.e., what kind of outage time can we expect)?
Thanks in advance,
Mike

Hi Bro
Thanks for the update, but still you'll need to create 2 contexts, each context will be ACTIVE on different Cisco ASA FW units. Hence, there will be some cut, copy and paste effort, not forgetting recabling, if that's needed. Here's a Cisco document to configure ACTIVE/ACTIVE for those who can't seem to find this document http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080834058.shtml#req
Conclusion: There will be some network downtime. I'm guessing 15min, if it was me :-)
P/S: If you think this comment is helpful, please do rate it nicely :-)

No data in ecc variables in failover mode

Hi all,
got a problem with custom enterprise data layout when CAD is connected to secondary node.
With "set enterprise..." I set a special layout for CAD enterprise data in my script. This works fine as long as CAD is connected to primary node. When CAD is connected to secondary node there is no data in expanded call variales and CAD displays default layout. Changing default layout and writing the content to predefined variables works fine. So it seems only extended call variables are not working in failover mode.
Any ideas?
Br
Sven
(UCCX v8.5)

Hi Sven,
Looks like TAC helped fix the issue. Previously we had rebooted both servers without success. TAC suggested to restart the Desktop Enterprise Service on both servers (I did Pub first than Sub). I've verified ECC variables are being sent to CAD correctly.
The root cause might of been a network outage we had a week ago. We were using the Desktop Workflow Administrator at the time of the outage.
Kyle

Does VPN works in Firewall Active Active failover mode?

i want to clarify these two things!
1. Does VPN works in failover mode in Active/Active mode?
2. What about in Failover mode Active/Pasive?
Regards!

Hi,
Using an Active/Active Failover means that the Firewalls will be in Multiple Context mode. In other words virtual firewalls.
This means that you can ONLY use IPsec L2L VPN connections on the virtual firewalls if you are running 9.x software level on the firewalls. Any form of Client and Clientless VPN isnt supported in Multiple Context Mode at the moment.
Now with Active/Standby we have to make a distinction (if that was the word).
IF you run a normal Active/Standby Failover pair of ASAs that IS NOT in Multiple Context mode YOU CAN use any type of VPN the ASAs support.
IF you run a a pair of ASAs in Multiple Context Mode and in Active/Standby Mode you will naturally run into the limitation of VPN support in Multiple Context Mode and WILL NOT be able to use any other VPNs other than IPsec L2L VPN connections provided you are running 9.x software that supports it.
Hope this helps
- Jouni

ASA Active/Standby mode and Hello messages

Hi Everyone,
On ASA Active/Standby mode i know thatsay inside or any other interface of active and standby ASA should connect to same switch and vlan.
When we assign say ip address to inside interface of both ASA like
ip address 192.168.x.1 255.255.255.0 standby 192.168.x.2 255.255.255.0
Need to know if these inside interface talk to each other or not?
Do they send hello messages?
Thanks
MAhesh

Hi Mahesh,
The ASA Active/Standby Failover pair uses both the dedicated Failover interface and the actual Data interfaces to monitor the "health" of the Failover pair.
The units send Failover hello messages and wait for a reply to determine if the other unit is alive or not.
By default all Physical interfaces are automatically monitored. To my understanding Logical interfaces such as Trunk interfaces are NOT monitored by default. You will have to configure monitoring for each subinterface of the Trunk that you want to be monitored.
You would use the command
monitor-interface
Check the Command Reference section for this
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/m.html#wp2123112
I would also suggest reading the following section of the Configuration Guide
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/ha_overview.html#wp1079010
It has information of the Unit and Interface health monitoring of the Failover pair.
If you want to debug Failover activity you could use the command
debug fover
It has multiple additional parameter after that command
Here is the Command Reference section for the debug command
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/d1.html#wp2093011
You can even attach a computer on the switch between the ASAs and capture the packets between them an you can see the Failover messages etc from the ASAs
- Jouni

I really need emergency iphone help- please- it has gone into restoration mode and wont come out unless i click restore- if i do will i loose all my photos and videos etc? please help!!!

i recently plugged my iphone4 into my laptop to sync, when i plugged it in, itunes told me that i needed to update my software, so i clicked up date and walked awayfrom my computer leaving it to do the rest, but by the time i came back to my laptop 2-3 hours later i had realized that it has run out of charge and because of it my phone had gone into retoration mode- and the only way to fix it was to press restore. what do i do? do i click restore or will that take my phone back to factory settings as i have a tonne of photos and videos etc that i have not backed up yet?
what should i do anny coments or ideas please let me know!

The first step in the upgrade process is a backup.
Did iTunes not create a new backup when you first connected it?
You really should be syncing your device and copying pictures off of it on a regular basis.
Starting an upgrade without first syncing and copying the pictures off is not a bright idea.
At this point, you only option is to restore.
Also, in the future, ensure your laptop is plugged into external power before starting upgrades.

My ipod touch is in dfu mode and does not want to turn on.

my ipod touch is in dfu mode and does not want to turn on.

What happens when you connect the iPod to your computer and restore viia iTunes?

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

jamestait wrote:
when I record, my previous track data keeps getting overwritten.
since you didn't specify, are you recording in a single take?
http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
(Let the page FULLY load. The link to your answer is at the top of your screen)

Please help, iPhone 5 stuck in recovery mode and will not update.

I tried to update my girlfriend's iPhone 5 (AT&T) from 6.1.2 to 7.0.4 last night and something went wrong so of course I had backed it up so I put the phone into recovery mode and attempted to completely restore it and then restore from back-up (or at least that was my plan) but the problem is that once I got it in recovery mode and started the update it froze mid-update (Not a computer problem, I have a rMBP 2013, 2.3 ghz i7 & 16GB ram) so after about 30 minutes of watching it at the same spot I unplugged it and attempted to start over. Now everytime I attempt to update it it tries to re-download the software and once it gets completely downloaded it says it was corrupted during the download. I have also attempted to download the IPSW manunally and update that way and it now gets partially through the update and throws an error message. I have tried to use tinyumbrella to kick it out of recovery mode and it does not work either. I am out of options, I have no idea what else to do. I aplogize for my ****** grammar and sentence structure I am flustered and haven't taken the time to proofread it.

FIRST, edit your hosts file (which was corrupted by the jailbreak process) and remove any references to gs.apple.com; delete the whole lines and save the file. If you don't know how to do this you will have to get help, and it shows that jailbreaking was a bigger mistake than you thought.
Next, connect to a USB port directly on the computer, not a hub and disconnect all USB devices that consume power or bandwidth (like USB drives).
Put it into DFU mode to restore. With the phone disconnected hold HOME and SLEEP until a black screen appears. Immediately release SLEEP and continue holding HOME. While holding connect to iTunes and continue holding. After a while (perhaps several minutes) iTunes should recognize the phone. When it does release the HOME button and hope for the best.

What is difference between TEXT mode and BINARY mode?

Hi,
          What is difference between TEXT mode and BINARY mode? In TEXT mode what is "ENCODING DEFAULT".
OPEN DATASET wl_filename FOR INPUT
                          IN TEXT MODE ENCODING DEFAULT.
OPEN DATASET wl_filename FOR INPUT
                          IN BINARY MODE .

Hi vishnu,
1. files like .TXT files are considered to be text,
   and other files like .EXE . DOC etc are binary files.
2. In text files, after each line, there are two
   internal binary characters
one for line feed and another one for newline.
3. But, we don't have any meaning for it,
   when we view such files in notepad, for eg.
   Hence, to only get the understandable content,
   we should open such TXT files, in text mode.
(we can also open them in binary mode,
but we will get two extra characters after each line,
   and such two extra characters are meaningless
for interpreting the text)
4. In binary mode, each byte by byte is considered,
   without any meaning.
regards,
amit m.

I forgot my password and am trying to reset my ipod,but it won't work. It says that my ipod is in recovery mode and that I must restore it. I click ok, and then restore, and then restore and update. then it says contacting ipod software update server and

I forgot my password and am trying to reset my ipod, but it won't work.It says that my ipod is in recovery mode and that I must restore it. I click ok, and then click on restore and update. Then it says connecting ipod software update server and a screen pops up with ipod software update on the top and iOS 5.1. It lists a bunch of stuff this update contains and on the bottom it says next, which I click and nothing happens, it just goes back to the ipod restore page. Help, what am I doing wrong?

This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

Yoga 2 Pro - Frequent issues after Tablet Mode and Suspend in Windows 8.1

Hi,
I bought a Yoga 2 Pro running windows 8.1 in December 2013. The machine runs fine, but from the beginning I experience frequent system issues whenever I have the Yoga in Tablet mode (display turned to the back).
The issues sometimes arise directly after I resume from tablet mode. More frequent the issues appear once I had the machine in tablet mode and after had it in suspend mode!
Some of the frequent issues that arise after I resume from tablet mode:
Power surge at right USB Port, where I have my mouse connected! The connected device cannot be provided with enough power. (Note, the left port still works), or
WiFi not working any more (No WLAN device detected, WLAN not functional), or
Bluetooth not working (No Bluetooth device detected, BT not functional)
All issues reliably disappear with a system restart!
I have already updated my drivers, scanned the Lenovo and Microsoft forum whether this is known without success and hope this avenue will bring me more luck.
What makes the bug hard to narrow down is that I do not have a recipe to reproduce the error. Not every time I turn the display in tablet mode the symptoms are equal! But what I can is that the tablet mode is the most common denominator I found so far.
Any helped/suggestions much appreciated.
Regards
   Florian

Yea, great... it seems like these articles and suggestions come up in the forum, and then there is always someone that says "it didn't work but this solved it for me" which ammounts to setting the screen at full brightness all the time.   LENOVO, HOW ABOUT FIXING THE ISSUE!!! It definitly has something to do with power, in my case _the only_ thing that fixes it is either plugging in a power cord or closing the screen, reopening it and hitthing the power button to turn it back on (both are REALLY annoying if you're trying to get work done).
I'm a fairly experienced IT guy, and I used to swear by _IBM_ Thinkpads and related laptops, then when they went to Lenovo a few years ago it seems like the support has gone to hell and the hardware appears nice but is sketchy (this thing should have never shipped with this display problem or the wifi card issues that it shipped with).   Honestly if issues like this don't get resolved Im not likely to order any more, ever. Not for my self or for my organization, we will stop persueing contracts with you and certifying the hardware for our work (though with the lenovo purchase it was deemed that the hardware wasn't certifyable for certine applications anyway). Yes, that will cost you a few thousand sales a year, which is a drop in the bucket for you, but I'm sure I won't be the only one.

Yoga 2 Pro tent mode and auto-rotate not working

I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
Auto-rotate does not work at all now. The screen is un-locked.

Dear NX3
Welcome to Lenovo forums
Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
http://support.lenovo.com/us/en/downloads/ds038767
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

UI Control options do not appear for TCD mode and Webdynpro mode

Hi guys,
When I open the screen Start option in eCATT for ECC 7.0, there is no options for TCD mode and Webdynpro mode, only have for SAPGUI mode. So pls help to me find the options for these modes.
Thanks in advance,
Thien

Hello Friend,
This has been corrected by 640 SAPKB64023 and 700 SAPKB70016.
Please install the relevant SP to your system.
Thanks.
Eric Monteiro

I just updated to 4.0.1 on my mac and now it says "Firefox is currently in offline mode and can't browse the web". It is not my internet since I am using Safari just fine. Any suggestions? I sure wish I wouldn't have updated!

I just updated to 4.0.1 on my mac and now it says "Firefox is currently in offline mode and can't browse the web". It is not my internet since I am using Safari just fine. Any suggestions? I sure wish I wouldn't have updated!

Make sure that Work Offline is unchecked: File > [] Work Offline

Failover mode and JClient.

Similar Messages

Maybe you are looking for