Faulty Hinge on HP pavilion M6 Laptop

My wife and I both got a Pavilion m6 laptop and both have the same issue with each one.  The left hinge on her lap top the was $550 broke within a year, no damages were made to the laptop, it was well taken care of and it just slowly broke over time until it was all the sudden completely detached. It also caused damages to the screen. We weren't aware it even had a problem until the whole thing was all the sudden unattached. Then on my computer that was about $700+ after normal use and it being also well taken care of the same thing happens. The left hinge all the sudden is completely broken. This should not happen. A computer that is $500 and $700 should not have breaking hinges. We are very disatisfied with these computers for that reason and now we have to take much precaution just opening and closing them to make sure the problem doesn't get any worse.  Is there anything that can be done about this problem that should not have happened?  

Hello Kooistra,
Thank you for posting on the HP Support Forums. I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicaly post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
If you have already resolved your matters, please disregard this message.
Thank you
Duane_D

Similar Messages

  • Faulty hinge in pavilion m6 laptop

    I have an Hp pavilion m6 laptop under two years old in which the left huge has given out and the plastic around the screen has cracked. I have heard of lots of other upset customers with this issue with this laptop. This should not happen with a $700+ laptop. What can hp do to fix this since this is clearly a design issue?

    I am having the same issues regarding the right hinge on my laptop. Please let me know what needs to be done to get this fixed as I have seen that seems to be a pretty common issue.
    Thanks for all you do.

  • Hard drive not recognized on startup. hp pavilion ze4900 laptop

    Receive the following screen message when I try to start.  hp pavilion ze4900 laptop
    Intel UNDI, PXE-2.0 (build 082)
    Copyright (C) 1997-2000   Intel Corporation
    For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
    PXE-E61:  Media test failure, check cable
    PXE-M0F:  Exiting PXE ROM.
    What does this mean?
    Did you find an answer to this problem?

    It means the hard drive has likely died. It is going past where the hard drive would be in the boot order into network (PXE) boot. To double check, tap F10 as you power up and see if you can find the hdd in the BIOS. If not you just need a new hdd.

  • Pavilion dv4405nr laptop hard drive and recovery

    Hi,
    My daughter's Pavilion dv4405nr laptop's HDD (Samsung MP0804H Spinpoint M Series 80GB) is dead. It doesn't boot, and BOIS HDD test gives error 7. I took the HDD out, and connected it to several PCs (home, work) using two HDD universal adapters (like a BYTECC, and a NewTech) I left it spinning for about 6 hours. The PC sees the mass storage device, but it never shows up in MyComputer with a letter assigned. By right-clicking the working HDD and checking its properties, it lists all HDDs and I can see the damaged one listed w/o a letter assigned. I click to load volume information but all displays zeroes. I downloaded a Seagate-Samung utility to test the drive, and got the same error I had gotten with the laptop's BIOS utility.
    Can this HDD be recovered? Is there a utility that can recover it?
    If the answer is no: I connected the HDD back into the laptop, and set the boot sequence to DVD drive. I inserted the "All-In-One Recovery DVDs" for this laptop, but they didn't boot. Aren't the recovery DVDs bootable?
    Your help and suggestions will be greatly appreciated.
    Sincerely,
    Richard

    It looks like this unit came with Windows XP. It really depends on when in XP's production cycle the unit was released on how recovery works.
    I am afraid the HDD is beyond salavaging at this point and the hard drive will need to be replaced. The recovery more than likely will fail on the bad HDD.
    Early units came with recovery disks, one of which was labeled Operating System, and some used the F10 recovery and required making the recovery disks using a program (these units did not come with disks).
    Is there a disk labeled as Operating System or Disk 1 of X?
    If it is Disk 1 of X, then you would start with it, but start with Operating System if there is one labeled that.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Can someone please help!!! me i have a HP Pavilion dv6636nr laptop and no sound

    i have a  HP Pavilion dv6636nr laptop and were my sound icon is located it  has a (x) on it and it says no audio output device is installed I've tried everything i download the audio driver from hp ssoftwear & downloads and i get a error msg that  reads driver installation failed :could not find the device for this driver can someone pleaseeeessss!!!!!!!!!!!!!!!! help

    someonehelpmaddy wrote:
    My Mac knows that it is connected to the montior...
    Open your Displays system preferences.  Is there an Arrangement tab and does it show two screens?  If no Arrangement tab then your mac does not know it has two screens.  Maybe smc and pram reset will shake it free and maybe not.  Maybe there's something wrong with the connection.  Thunderbolt plugs are similar to mini-displayport plugs so make sure the plug is pushed firmly in so that essentially all the metal part disappears inside the socket.  The plugs can be a little tricky in that you need to make sure the plug is fully seated in their socket.
    If you do see two screens in the Arrangement tab then click Detect Displays and Gather Windows to get the Displays preferences of the other monitor on to your main monitor.  Check the resolution and if there is a refresh rate check that as well.

  • Why can't i download itunes to my hp pavilion dv6 laptop?

    why can't i download itunes to my hp pavilion dv6 laptop?

    Impossible to say with no information on which to base a diagnosis. "can't download" by itself doesn't tell us anything useful. What OS is your laptop running, and where exactly are things going wrong, including error messages if any?
    Regards.

  • No sound is coming from my HP pavilion dv5 laptop after automatic update

    product name: HP pavilion dv5 laptop
    operating system: windows vista 32 bit home primium
    after automatic update  no sound is coming from my laptop.internal speaker are also not working.also windows starting sound is not coming.i also installed the drivers,update sound drivers but still sound is not coming.please give me perfect solution.

    Hi,
    Can you post back with the full Model No. and Product No. of your dv5 series notebook - see Here for a guide on locating this information.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • At the BIOS updating the HP Pavilion zd7000 laptop hanged

    At the HP Pavilion zd7000 laptop BIOS updating from a site HP.com (the file sp33465.exe, OC Windows XP) the laptop hanged and to a BIOS it was not established. Now at inclusion all bulbs burn, but the laptop doesn't submit life signs, fans,
    NDD don't work. The BIOS.bak file remained, but with USB-Flash it is impossible to establish. At USB-Flash connection it
    3 times blink and is disconnected. Prompt how to return BIOS.

    Thanks for the answer. On the bottom cover there is a bar code and number - DP080AVR MFQ# 2CB41216S4 Made in Taiwan.
    Any error messages on the screen wasn't and isn't present. Updating hanged approximately for 40 % -
    6 dark blue segments. After laptop switching off, approximately in 1 hour, it doesn't join any more, and at all doesn't submit
    any signs of work. All light-emitting diodes on the top panel only burn.

  • I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

    I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

    Hello Don,
    Thank you for the details of the issue you are experiencing with iTunes.  I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described.  The following article has steps to do this(it is important to remove all components in the order listed):
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    I recommend continuing with these articles if you continue to experience issues with iTunes:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have an HP Pavilion g6 laptop, and am trying to set up my recovery discs. I get an error message

    I have an HP Pavilion g6 laptop, and am trying to set up my recovery discs.  I get an error message that states "inserted media not supported".  I am using CD-R Music discs.  Is the problem "Music" ?  Will it not recognize a blank music disc?

    Hi,
    Yes, it is the discs that are the problem - you will need to use good quality DVD+R or DVD-R discs.  See the section under the sub-heading 'Create a set of operating system Recovery Discs' on the link below.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01895783
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Pavilion G6 Laptop Stuck on 0%

    Hello, I have recently encountered a major problem in charging my HP Pavilion G6 laptop. I had not been using my laptop for a week as I had been using it frequently beforehand. I charged it and when I booted it up it said it had 0% while it was still connected to the charger. I left to to charge for longer and even though it said it was charging, the laptop remained on 0% of power. It still works (Very slowly now), but if I remove the charger the laptop immediatly shuts down due to it displaying that I have 0% of charge. I assume the problem lies with the battery, but before I buy a new battery I'd just like to know if this problem can be explained and can it be solved with a more practical method? Thank you.

    Hi there, glad you posted your question here before buying another battery. From what I've found, there are still a few steps you can try first
    Please take a look through this whole guide, hopefully it'll help kickstart that battery and the connections back to life:
    Battery Does not Power Notebook or Hold a Charge
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • ? i have a hp pavilion g6 laptop comes on wont boot 4 months old

    ? i have a hp pavilion g6  laptop comes on wont boot 4 months old  wont boot to hd or cd can get to bios it dont help tryed to restore was not much on it .

    Hi,
    If it won't boot from the Hard Drive or Optical Drive, you may well have a fault with the Sata Controller on the Motherboard - at the end of the day, by far your best option as your notebook is still under warranty, is to contact HP and arrange for it to be repaired.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I have a hp pavilion dm4 laptop

    I have a hp pavilion dm4 laptop and it so happend that it suddelny stopped working and started displaying black screen and the caps lock button is blinking. Wat myt b d problm. Ny1 with perfct solution reply ASAP Problem with display

    Hi NECROMANCER274, and welcome to the HP Support Forums! 
    I understand that you are getting a blank screen and your caps lock button is blinking. I will try my best to help you with this problem.  To better guide you, could you please give me the full model number or product number of your Notebook and the operating system that is currently running on it. Here are some guides for How Do I Find My Model Number or Product Number? and Which Windows operating system am I running?
    In the meantime, this document for Blank Screen LED Error Codes will have information on the blinking Caps light.
    I hope this helps, please let me know how it goes.
    Thank you and have a great day!
    I worked on behalf of HP.

  • Forgotten my BIOS password on my hp Pavilion dv2718 laptop!

    I have forgotten my BIOS password on my hp Pavilion dv2718us laptop. When I access Setup through F2 and then try three times unsuccessfully, I get code 08653. The specifics of my laptop are:
    HP Pavilion dv2718us laptop
    Phoenix BIOS ID F.27 11/27/2008
    Windows Vista Home Premium 32-bit SP2
    Please help ... gww
    This question was solved.
    View Solution.

    Decided to go ahead and pull the CMOS battery and clear the password which worked fine. When I went into the BIOS, I realized that the first password given me - (generic Phoenix) pkxdirv actually worked because I had pressed F2 and not F10. F2 apparently only brings up the Diagnostics part of the setup, at least on this laptop. Thanks for the help ...

  • Internal Microphone not working on Pavilion dm4 Laptop

    I have an IDT High Definition Audion CODEC internal microphone on a Pavilion dm4 laptop.
    I was advised by an helpful HP support person to uninstall and re-install drivers and this I have done a couple of times.
    Occasionally the microphone works but more often it is still not working from Start up. It is not working today!
    I am trying to use Skype.
    I have checked that the driver is up to date. ( right click on IDT in Device Manager) and this was confirmed.
    I would be very grateful for any other suggestions.
    Christopher

    Thanks for the suggestion.
    I opened the Sound control panel as you suggested and the Internal Mic (IDT) is shown in the list of microphones and has a green tick ( and is already enabled in properties). It is selected as a default device. ( the icon shows a picture of the laptop indicating the microphone on the lid  not the picture of the microphone as shown in your clip)
    In the Sound control window there is a sound indicator panel to the right of the internal Mic Icon that has a green bar that moves up and down - indicating that the microphone is responding to sound.
    However it is still not working in Skype and it is the Internal Mic that is selected as the device here.
    Very frustrating as I really would like to Skype. I tried uninstalling and re-installing Skype Version 5.5.0.117 and this has not made any difference.
    Any other thoughts?
    Christopher

Maybe you are looking for

  • Critical program error while opening some workbook

    Hi all, We are in BI 7 with suppoprt package 12 and GUi version 710. Whenever iam trying to to open some workbooks system is showing the mesaage Critical programm error. I checked the trace file also but din t get anything . Th trace file is saying:

  • Display a text conditionally in a form view

    Hi Experts,     I have a BAPI being used as a data service in my model. It returns a table. If that table is empty, i need to diplay a plain text message "Success". If the table has atleast one entry, I should display a text message "Not Success". Ho

  • Setting return height in text?

    How do you modify the hard returns between text in Illustrator?  For example, I want to adjust the amount of space a hard returns creates between two paragraphs.  Thanks!

  • Forced conversion in data base utilities

    I am trying to activate the infoobject 0busobject it is giving conversion block lock error. i am not able to activate the BI content object . Can you tell me where to search for <b>database utilities --- Forced conversion</b> to use this functionalit

  • My Photoshop freezes and then won't open? Help?

    Hi all, I am running CS6, but over the past fe wmonths it has started acting strange.  When I go to save the file, sometimes as a PSD and other times as a jpeg or gif, the program freezes up on me and I get the spinning beachball.  I have to force qu