Fetching data from ECC to APO

Hi,
I have fetch to data from ECC custom table to APO and create data, can anyone let me know the procedure.
Thanks in advance

Hi Santhana,
If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
1. Create Generic Data Source in ECC for thet Sales Order table.
2. Replicate that data Source in to APO BW with Source System.
3. Create whole data flow process by using created Data Source.
    Data Flow Process: 1. Info Package
                                  2. Info Source
                                  3. Info Cube
                                  4. Transformation between DS & IS, Then IS & IC
                                  5. Data Transfer Process.
4. Load data from ECC to APO BW
5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
Hope this will help you.
Regards
Sujay

Similar Messages

  • Issue in transfer of data from ECC to APO

    Hi All,
    I have a requirement of transferring data from ECC to APO. I am using EXIT_SAPLCMAT_001 fro this purpose. The problem is, I need to transfer the data of a field that is not present in cif_matloc but present in /sapapo/matloc.
    How should I proceed...Please help....this is an urgent requirement
    Thanks & Regards,
    SriLalitha

    Hi,
    you may want to go to the transaction /SAPAPO/SNP_SFT_PROF
    Determine Forecast of Replenishment Lead Time
    Use
    In this field, you specify how the extended safety stock planning determines
    the forecast of the replenishment
    lead time (RLT). The following values are available:
    Supply Chain
    The system determines the RLT forecast using the supply chain structure by
    adding the corresponding production, transportation, goods receipt, and goods
    issue times. If there are alternative procurement options, the system always
    takes the
    longest
    option into account.
    Master Data
    The system determines the RLT forecast from the location product master
    data.
    Master Data/ Supply Chain
    First, the system determines the RLT forecast from the location product
    master data. If no RLT forecast can be determined, the system determines the
    forecast using the supply chain structure (as described under
    Supply
    Chain
    Dependencies
    You can retrieve the replenishment lead time forecast yourself by using the
    GET_LEADTIME
    method of the Business Add-In (BAdI) /SAPAPO/SNP_ADV_SFT.
    Replenishment Lead Time in Calendar Days
    Number of calendar days needed to obtain the product, including its
    components, through in-house
    production or external
    procurement.
    Use
    The replenishment lead time (RLT) is used in the enhanced methods of safety
    stock planning in Supply Network Planning (SNP). The goal of safety
    stock planning is to comply with the specified service level, in order
    to be prepared for unforeseen demand that may arise during the replenishment
    lead time. The longer the RLT, the higher the planned safety stock level.
    Dependencies
    The field is taken into account by the system only if you have specified
    master data or master data/supply chain in the RLT: Determine
    Forecast field of the safety stock planning profile used.
    Hope this helps.
    The RLT from ECC is in MARC-WZEIT which is transferred to APO in structure /SAPAPO/MATIO field CHKHOR.
    May be if you maintain the setting in the profile, you may get the value in RELDT.
    Thanks.

  • Master/Transaction data from ECC to APO-BW

    Hi All,
         Normally we come across scenarios where Master/Transaction data is pulled from ECC to BW and then pulled into APO-BW. What are the pros and cons of CIF (direct connection between ECC and APo-BW) rather than pulling data from ECC to stand-alone BW and then into APO-BW?
    Regards,
    Joy

    Hi Santhana,
    If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
    1. Create Generic Data Source in ECC for thet Sales Order table.
    2. Replicate that data Source in to APO BW with Source System.
    3. Create whole data flow process by using created Data Source.
        Data Flow Process: 1. Info Package
                                      2. Info Source
                                      3. Info Cube
                                      4. Transformation between DS & IS, Then IS & IC
                                      5. Data Transfer Process.
    4. Load data from ECC to APO BW
    5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
    Hope this will help you.
    Regards
    Sujay

  • Transaction data from ECC to APO DP

    Dear All,
    Can you tell me if i can directly load transaction data directly from ECC to APO BW Infocube.
    For example i want to load say sales orders from ECC.
    Can i directly load from ECC --> APO BW Infocube --> DP Keyfigures.
    Or any staging is required inbetween ECC and APO BW
    Thanks
    Santhana.

    Hi Santhana,
    If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
    1. Create Generic Data Source in ECC for thet Sales Order table.
    2. Replicate that data Source in to APO BW with Source System.
    3. Create whole data flow process by using created Data Source.
        Data Flow Process: 1. Info Package
                                      2. Info Source
                                      3. Info Cube
                                      4. Transformation between DS & IS, Then IS & IC
                                      5. Data Transfer Process.
    4. Load data from ECC to APO BW
    5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
    Hope this will help you.
    Regards
    Sujay

  • CIF of transaction data from ECC to APO

    Hi,
    I wanted to know where we maintain the configuration for real time transfer of transaction from ECC to APO.
    I know for master data we have an option in CFC9 for real time/periodic transfer. Is there any similar config for transaction data too like sales orders etc.

    Hi Alok,
    To allow online transfer of changes to transaction data from SAP R/3 to SAP APO, you have to activate generally the BTEs in SAP R/3.
    This is done in R/3. This is the path:
    SPRO --> Integration with Other SAP Components --> Basic Settings for the Data Transfer --> Change Transfer --> Change Transfer for Transaction Data --> Activate Online Transfer Using BTE
    You can read about it here:
    Change Transfer for Transaction Data - Integration via APO Core Interface (CIF) - SAP Library
    Then of course you will need to generate and actiave your IModels.
    Kind Regards,
    Mariano

  • CIF - Master/Transactional Data From ECC to APO

    Working on CIF Data From ECC6.0 to APO(SCM 5.0)..
    If i choose MRP type XO in ECC - Master Data & Transactional Data is moving properly to APO.
    As we are using MRP in ECC6.0..and the MRP Type is PD...
    I want to CIF the Master Data & Transactional Data using MRP Type PD? is it possible?How?
    Regards,
    Rajesh Patil

    Hi Rajesh,
    As visu rightly indicated, it is always safer to use XO while planning in APO.  Still, if the business requirement compels to use PD, you can cif with PD, then copy the data from active to an inactive version and then carry out the simulation planning.  Once results are copied, you can change the mrp type to xo in R/3 and re-cif it.  Then you can compare the result in APO between active and inactive versions.
    Regards
    R. Senthil Mareeswaran.

  • CIF STEPS to load data from ECC to APO from Process chain

    Hi,
    i try to create on ECC system a process chain in order to execute the CIF program for updating APO Material/Plant Master data on DELTA mode .
    I am not sure that the procedure is correct, at the moment i put on a chain:
    - Step 1 Program RIMODGEN with a specific variant
    -Step 2 Program RIMODACT2 with a specific variant.
    Is necessary a third step with RIMODACT2 in order to deactivate the integration model?
    On APO we have to insert other standard step in order to complete the delta update?
    Any experience on similar situation?
    Thanks,
    Veronica

    Veronica
    You do not need a third step. You do not need to deactivate the model. In fact, it is not recommended to do so. You do not need any step in APO.
    If your CIF setup is correct, the first two steps should be enough.
    If by 'Delta', you mean field value changes to material/ plants in an existing integration model, you dont even need to do CFM1/ CFM2 if you have setup transaction CFC9 for BTE (online transfer).
    Rishi Menon

  • Fetching Data from SAP ECC to BODS 4.0

    HI,
    I am trying to fetch tables like LFA1 and ADRC into BODS from ECC. I am able to connect to the ECC system from BODS.
    In Data services Designer I go to Datastore and add a new datastore as SAP Applications.
    I am able to connect to ECC using this. After that when I select the datastore and select import by name i get the following error
    Data Services Designer
    Error: Cannot import the metadata table <name=LFA1>.
    RFC CallReceive error <Function Z_AW_RFC_ABAP_INSTALL_AND_RUN: RFC_ABAP_MESSAGE- SAP System has status 'not modifiable'[SAP NWRFC 711][SAP Partner 701 ][PET][hicgudb3][BOBJDS][4102]>. (BODI-1112339)
    OK  
    Can you please help me in resolving this.
    What kind of access does the user need to have for fetching data from ECC using BODS
    Thanks in advance.
    Regards
    Sudip.

    Please refer to the [documentation|http://help.sap.com/businessobject/product_guides/boexir4/en/sbo401_ds_sap_en.pdf] that discusses that in quite a lot of detail.

  • Error in Data transfer ECC to APO

    Hello Guys,
    I'm getting an error in my system when I try to transfer data from ECC to APO system. When I CIF (after generating IM, when I activate it)  older data (master data created previously in system), I'm getting a short dump with mesage class 'XC', It says :
    Diagnosis
        An internal condition was found during the
        the system to access a substandard program"
    Trigger Location of Runtime Error
        Program                                 SAPLCSER
        Include                                 LCSERU02
        Row                                     101
        Module type                             (FUNCTION)
        Module Name                             CIF_SER_MESSAGE_SERIALIZE.
    But when I create a new data and try to transfer it, it smoothly transfers into APO without any dump or error.
    Similarly, when I pull the data in APO with CCR, I get short dump while iterating data:
    Category               ABAP Programming Error
    Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
    ABAP Program           /SAPAPO/SAPLDM_LC_SQL
    Application Component  BC-DB-LCA.
    The current ABAP program "/SAPAPO/SAPLDM_LC_SQL" had to be terminated because
    it has
    come across a statement that unfortunately cannot be executed.
    A table is referred to in an SAP Open SQL statement that either does not
    exist or is unknown to the ABAP Data Dictionary.
    The table involved is "/SAPAPO/ORDMAP" or another table accessed in the
    statement.
    I'm not much aware on LC technology, I have deactivated & activate LC once in LCA10. Also, checked consitency in OM17, it shown no inconsistency. Plus, when checked in OM13, all checks are showing green.
    Can you please suggest what needs to be done?
    Thanks,
    AP.

    Hi Deepak,
    Following is the detail I could see:
    Cl.  User         Function Module                 Queue Name                Destination                       Date        Time
    100  SS813794     MCEX_UPDATE_11_QRFC        MCEX11           NONE              27.02.2014  05:33:02
    100  SS813794     MCEX_UPDATE_11_QRFC         MCEX11          NONE               02.03.2014  23:00:35
    Status                                              TID                       Host      Tran                  Program
    Transaction recorded                AC131B362DEC530F145E0001  IGTBILSA  VA01                  RSM13000
    Transaction recorded                AC131B362DEC5313FE630002  IGTBILSA  VA01                  RSM13000
    Both the queues which are seen are while I created a sales order in ECC.
    If I further double click, it will take me into FM and after clicking queue name 'MCEX11' I could see:
                        LUW Information
            TransID:         AC131B362DEC530F145E0001
            LUW-Cnt:         00000001
    Thanks,
    AP.

  • How to fetch the data from Ecc to BI ?

    Hi everybody.
    Can anyone briefly explain with the screen shots > How to fetch the datasource from  RSA5 tcode in ECC to BI? How you replicate there? how the INFO PACKAGE , TRANSFORMATIONS, DTP , DSO, INFO CUBE was created? where we see the catalogs for this data.......THANKS IN ADVANCE

    Hi.
    You can follow the below steps to fetch the data from ECC to BI System.
    1>Connection should be there between ECC and BW System.
    2>Go to Tcode-RSA5 in ECC system and find your data source and then activate it.
    3> Go to Tcode-RSA6 in ECC system to check whether your DS is available..if it is there then its been activated.
    4>Go to Extract Checker tcode RSA3 and test the data and make sure data is correct.
    5>login to BW Side..go to tcode RSA1-->Choose your source system. ECC -> double click on it and you will move to Data source>Select your Application component ex, SD,FI ...>Right click and replicate the Datasouce> Now on refresh you can see the datasource in BI System.
    6>Install the related the Infoprovider .. cube or dso ..Connect the datasouurce and create Transformation.
    7> Now create infopackage and run it in ful & init mode then do the delta for the new records.
    Please refer the below link for more details on extraction.
    http://www.trinay.com/SAP%20BW%20Extraction.pdf
    Hope this helps.
    Br.
    Alok

  • How to delete Master Data transferred from ECC to APO via CIF

    Hi, all
    I'm connecting SCM 5.1 with ECC 6.0 via CIF.
    When activating Integration Model in ECC, the following error occurred;
       "Location 0001 of type 1001 (BSG 592BUSGP) already exists in APO"
    This is because Location 0001 was already transferred from different ECC client via CIF, and not cleared.
    I'm now trying to initialise master data transferred from ECC to APO via CIF, but in vain.
    I suppose I have to first delete all master data CIFed from ECC in APO, or have to execute initialisation of APO master data with ECC data in ECC.
    Please tell me how to do this.
    For details, please read the followings;
    I connected APO client with ECC client 590.
    I transferred Plant and Material Master from ECC to APO via CIF.
    After that, I wanted to change ECC client from 590 to the other.
    I created the other client (592) by client-copying from 590 with SAP_ALL copy profile.
    I deactivated Integration Model in ECC 590, and activated the same in ECC 592.
    Here, I faced the problem.
    The initial data transfer failed due to the duplicate of data.
    Now I'm wondering how I can initialise master data in APO and transfer initial data from ECC.
    Due to testing purposes, I have to change ECC clients from one to the other this time, but I cannot initialise master data in APO and cannot tansfer initial data from different ECC client.
    thanks in advance,
    Hozy

    Hi all,
    Thank you very much indeed for lots of your replies.
    Thanks to all of your advices, I'm getting to understand what to do.
    Well, I'll say I have to create one more client for testing with other ECC clients or I have to rebuild the client by client-copying from 001 and implementing all transportation requests, for marking del flags to each master data and running del programme sound like tough work, and sound like odd ..
    Then, I've got next issue here.
    In SCM-APO, I use BI objects, and , if I have to create several clients for testing, I have to set up clients where you can use both BI objects and CIFed master data.
    I suppose I have to change 'BWMANDT' in RSADMINA and make RSA1 accessable in other SCM clients and implement tests.
    Also, I have to register BI System for newly created SCM clients in RSA1-SourceSystem.
    Well, if you have any experiences on this kind of use, and if you have any advice on it, please give me any tips.
    Particulary, I'd appreciate very much if you give me advice on which way you have chosen; creating several clients or rebuilding the one client in SCM-APO when you use both BI objects, CIFed master data and Demand Planning.
    Thanks in advance.
    Hozy

  • Goods Receipts data from ECC 6.0 to APO system

    Hello Team
    Good day to you. Now i have the below requirement.
    1. From legacy system i am getting Goods Receipt data and i want to create GRs in ECC system. for this i found a relavent bapi (ie  BAPI_GOODSMVT_CREATE). please correct me if i am wrong.
    2. As soon as GRs gets create in ECC system, i want to push this data to APO system for udpates. -- > so for this requirement i want to know is there any user-exit/badi exists in which i can write a code to trigger the RFC function module which takes data from ECC system and updates into APO system or is there any other way to perform this task. please suggest me on this.
    my Interface landscape is as below.
    Legacy system -
    > ECC system -
    > APO sytem
    i want to push GR data from legacy system to APO sytem as mentioned in the above two steps. so requesting you to please suggest the solution accordingly.
    Thanks in advance.
    REgards
    RAj

    Hi Mario
    Thank you very much for your detail explanation. But i think i have put a wrong question to you, i am so sorry for this. i am very new to this process. so i am putting my requirement and the options suggested below. so i request you to please check and suggest me accordingly. In Option 3 what is the BADI i need to use and what is the process to follow to complete my option 3 which is suggested. your suggestions will help me a lot.
    Thanks in advance very much.
    My requirement is below with the options suggested are given below.
    Design Decision and Options
    Description
    Describe the problem which requires a decision to be made.
    In the current design for Phase 1 go live, goods receipts from production will be generated through interfaces I608 (when production is receipted in PRISM) and I622 (when production is receipted via OPUS). This will update the stock levels in the ECC system. As the Core Interface (CIF) between ECC and APO will be active, the stocks will also be updated in APO.
    In APO, the production orders will not be reduced by the confirmed amounts until the PRISM to APO interface (I642) runs overnight. Until the production orders are reduced there will be double counting in APO leading to incorrect planning and GATP results.
    *Options(
    List the options that have been considered as potential solutions
    Option 1: Increase the frequency of the current PRISM to APO interface.
    Option 2: Build additional Interface between PRISM & APO for production confirmations.
    Option 3: Build enhancement to ECC GR to update APO production orders.
    Option 1: Increase the frequency of the current PRISM to APO interface
    Describe the pros and cons of option 1
    Pros
    No change to system design
    Cons
    Significant potential for issues with synchronous timing between Goods Receipts in the ECC system and Production Orders from PRISM to APO
    Interface method requires deletion/creation of production orders in APO which will cause issues for APO users
    Option 2: Build additional interface between PRISM and APO for production confirmations
    Describe the pros and cons of option 2
    Pros
    Interface method of updating production orders will not cause issues for APO users.
    Cons
    New interface
    Development work required in PRISM to feed new interface
    Significant potential for issues with synchronous timing between Goods Receipts in the ECC system and Production Orders from PRISM to APO
    Delay between GR from OPUS and production confirmation from PRISM to APO
    Option 3: Build enhancement to ECC GR to update APO production orders.
    Describe the pros and cons of option 3.  If only 2 options, then delete this section.  If more than 3 options, then add further sections.
    Pros
    Ties the APO production confirmation to the ECC goods receipt, mimicking phase 2 scenario
    Will not cause issues for APO users
    Removes timing issue between goods receipt and production order confirmation
    Cons
    New development.
    Assumptions for Proposed Development:
    Utilise available BADi upon posting of goods receipt
    Will generate qRFC that will run Production Confirmation BAPI in APO
    BADi executes in update task of goods receipt
    Interface for goods receipts will contain PRISM production order number
    Recommended Decision
    State which option is recommended as the decision, and the reason why this option has been recommended.
    Option 3:  Build enhancement to ECC GR to update production orders in APO.
    Regards
    Raj

  • Transfer of PIR from ECC to APO - Time stamp

    Hi Friends,
    We are transferring Planned Independent requirements from ECC to APO through CIF.
    In APO Product view Forecast requirements Date is sync fine with ECC date however the time is setting default to 03:00:00 am.
    we want the time to be set to 06:00:00 am by default.
    How we can we archive this?
    Regards,
    Krish

    Dear Tiago,
    I changed Product view Time zone settings, and issue resolved.
    Thanks for your valuable reply. Awarded you the points.
    Regards,
    Krish

  • Issue in CIF data between ECC to APO

    Hi Experts,
    We have ECC and APO system in our landscape. we have configured CIF and transferred data between ECC and APO however after ECC system refresh CIF configuration is not working. we verified and reconfigured the CIF configuration but still no luck.
    strange thing is, while sending the data for e.g vendor from ECC to APO, there is no error reported. It displays successful in both qRFC trace files but the transferred data is nt reflecting in APO system.
    There is no system run time error, no errors in system log (SM21), no logs in SLG1 application log, no erros in qRFC trace files.
    we have enabled RFC user trace but can't conclude the issue. could you please anyone let me know where we can check the error log or how to resolve this?
    Outbund Queue logs from ECC:
    QTYPE :OUTBOUND/S                                     
    DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT        
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:44:56 300             20.03.2015 17:44:56 N          N             
            0A1A01720F70550C0F4019E7                                       SENDING
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND       
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                          QTYPE :OUTBOUND/S                                     
    DATE       TIME     EXETIME  CLIENT  USER            QDATE      QTIME    BJOB    QEVENT     
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:44:57 00:00:01 300          20.03.2015 17:44:56 N       N          
            0A1A01720F70550C0F4019E7                                       CONFIRMD
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND       
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                          QTYPE :OUTBOUND/S                                     
    DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT        
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:44:57 300             20.03.2015 17:44:56 N          N             
            0A1A01720F70550C0F4019E8                                       SENDING
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT         
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                          QTYPE :OUTBOUND/S                                     
    DATE       TIME     EXETIME  CLIENT  USER            QDATE      QTIME    BJOB    QEVENT     
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:44:57 00:00:00 300          20.03.2015 17:44:56 N       N          
            0A1A01720F70550C0F4019E8                                       CONFIRMD
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT         
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Inbound Queue trace log from APO:
    QTYPE :INBOUND                                       
    DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT        
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:39:48 300                20.03.2015 17:44:56 N          N             
            0A1A01720F70550C0F4019E7                                       SENDED 
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND       
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                           QTYPE :INBOUND                                       
    DATE       TIME     EXETIME  CLIENT  USER            QDATE      QTIME    BJOB    QEVENT     
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:39:48 17:39:48 300             20.03.2015 17:44:56 N       N          
            0A1A01720F70550C0F4019E7                                       FINISH 
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND       
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                           QTYPE :INBOUND                                       
    DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT        
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:39:48 300                20.03.2015 17:44:56 N          N             
            0A1A01720F70550C0F4019E8                                       SENDED 
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT         
                                           QTYPE :INBOUND                                       
    DATE       TIME     EXETIME  CLIENT  USER            QDATE      QTIME    BJOB    QEVENT     
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:39:48 17:39:48 300             20.03.2015 17:44:56 N       N          
            0A1A01720F70550C0F4019E8                                       FINISH 
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT         
                                           QTYPE :INBOUND                                       
    DATE       TIME     EXETIME  CLIENT  USER            QDATE      QTIME    BJOB    QEVENT     
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N          
            0A1A019D23F8550C0E0C2559         0A1A01720F70550C0F4019E7      RUNNING
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND       
                                           QTYPE :INBOUND                                       
    DATE       TIME     EXETIME  CLIENT  USER            QDATE      QTIME    BJOB    QEVENT     
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N          
            0A1A019D23F8550C0E0C2559         0A1A01720F70550C0F4019E7      FINISH 
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND       
                                           QTYPE :INBOUND                                       
    DATE       TIME     EXETIME  CLIENT  USER            QDATE      QTIME    BJOB    QEVENT     
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N          
            0A1A019D23F8550C0E0C2559         0A1A01720F70550C0F4019E7      CONFIRMD
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND       
                                           QTYPE :INBOUND                                       
    DATE       TIME     EXETIME  CLIENT  USER            QDATE      QTIME    BJOB    QEVENT     
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N          
            0A1A019D23F8550C0E0C255A         0A1A01720F70550C0F4019E8      RUNNING
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT         
                                           QTYPE :INBOUND                                       
    DATE       TIME     EXETIME  CLIENT  USER            QDATE      QTIME    BJOB    QEVENT     
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N          
            0A1A019D23F8550C0E0C255A         0A1A01720F70550C0F4019E8      FINISH 
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT         
                                           QTYPE :INBOUND                                       
    DATE       TIME     EXETIME  CLIENT  USER            QDATE      QTIME    BJOB    QEVENT     
            TID                              ORGTID                        QSTATE               
        DEST                                    ERRMESS                                         
    20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N          
            0A1A019D23F8550C0E0C255A         0A1A01720F70550C0F4019E8      CONFIRMD
        <SID>CLNT300                                                                              
    LUWCNT   QNAME                    FNAM                          
    00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT         
    Thanks and regards,
    Pradeep

    Hello Pardeep,
    Please check the setting of SMQS and SMQR for CF and client registration
    these entries, the field 'TYPE' is set to 'R'.
    QIN scheduler may be available for every client if you are working in this client with registered inbound queues.
    Choose Edit->Activate scheduler from the menu (available in both SMQR and SMQS)
    During processing in dialog work processes, the system uses a parallel RFC to restart the registered inbound queues. For this, you can use transaction RZ12 to specify a group of application servers and dialog work processes that are allowed to use a QIN scheduler. You must use transaction SMQR to assign the group name to the relevant QIN scheduler.
    Different parameters in SMQR are explained in note 1579728. The explanation for SMQS is similar
    Also try the report RSQIWKEX
    Best Regards,
    R.Brahmankar

  • How to transfer Sales BOM from ECC to APO DP

    Hi,
    Demand planning require Sales BOM from ECC. Sales BOM in ECC will not have Routing & Work center, then how a PPM with Sales BOM can be transferred.  If i have to create a dummy routing & WC for those sales BOM it will be tidious job to create all the master data. Is there any way to transfer the BOM alone from ECC to APO.
    Please throw some light on it.
    Thanks & Regards
    Shan

    Hi Somnath / Ritesh,
    Are you sure about ciffing Sales BOM(usage 5)to APO as PDS ? Did you test it or your comments are based on SAP documentation?
    I tried to CIF Sales BOM as SNP PDS, it is creating PDS with only parent item.Child items are missing.I have not used any production version here.
    If i use production BOM(usage 1), it is creating PDS with both parent and child items.I have not used any production version here also.
    SAP says BOMs can be ciffed to APO as PDS. No productions versions are required. but it has not mentioned about BOM's usage. May be , Is it by default production BOM?
    One more question, Is it possible to create production version with BOM usage 5? It has no meaning right..
    I think system does not allow you to create production version with BOM usage 5.
    I also tried with BOM usage 2. In this case also it behaves like sales BOM.
    looks like only production BOM can be ciffed with proper BOM structure in APO.
    if required i can send you the link to share screen shots.
    Pls comment..
    regards,
    Umamahesh

Maybe you are looking for