Error in Data transfer ECC to APO
Hello Guys,
I'm getting an error in my system when I try to transfer data from ECC to APO system. When I CIF (after generating IM, when I activate it) older data (master data created previously in system), I'm getting a short dump with mesage class 'XC', It says :
Diagnosis
An internal condition was found during the
the system to access a substandard program"
Trigger Location of Runtime Error
Program SAPLCSER
Include LCSERU02
Row 101
Module type (FUNCTION)
Module Name CIF_SER_MESSAGE_SERIALIZE.
But when I create a new data and try to transfer it, it smoothly transfers into APO without any dump or error.
Similarly, when I pull the data in APO with CCR, I get short dump while iterating data:
Category ABAP Programming Error
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
ABAP Program /SAPAPO/SAPLDM_LC_SQL
Application Component BC-DB-LCA.
The current ABAP program "/SAPAPO/SAPLDM_LC_SQL" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.
A table is referred to in an SAP Open SQL statement that either does not
exist or is unknown to the ABAP Data Dictionary.
The table involved is "/SAPAPO/ORDMAP" or another table accessed in the
statement.
I'm not much aware on LC technology, I have deactivated & activate LC once in LCA10. Also, checked consitency in OM17, it shown no inconsistency. Plus, when checked in OM13, all checks are showing green.
Can you please suggest what needs to be done?
Thanks,
AP.
Hi Deepak,
Following is the detail I could see:
Cl. User Function Module Queue Name Destination Date Time
100 SS813794 MCEX_UPDATE_11_QRFC MCEX11 NONE 27.02.2014 05:33:02
100 SS813794 MCEX_UPDATE_11_QRFC MCEX11 NONE 02.03.2014 23:00:35
Status TID Host Tran Program
Transaction recorded AC131B362DEC530F145E0001 IGTBILSA VA01 RSM13000
Transaction recorded AC131B362DEC5313FE630002 IGTBILSA VA01 RSM13000
Both the queues which are seen are while I created a sales order in ECC.
If I further double click, it will take me into FM and after clicking queue name 'MCEX11' I could see:
LUW Information
TransID: AC131B362DEC530F145E0001
LUW-Cnt: 00000001
Thanks,
AP.
Similar Messages
-
Issue in transfer of data from ECC to APO
Hi All,
I have a requirement of transferring data from ECC to APO. I am using EXIT_SAPLCMAT_001 fro this purpose. The problem is, I need to transfer the data of a field that is not present in cif_matloc but present in /sapapo/matloc.
How should I proceed...Please help....this is an urgent requirement
Thanks & Regards,
SriLalithaHi,
you may want to go to the transaction /SAPAPO/SNP_SFT_PROF
Determine Forecast of Replenishment Lead Time
Use
In this field, you specify how the extended safety stock planning determines
the forecast of the replenishment
lead time (RLT). The following values are available:
Supply Chain
The system determines the RLT forecast using the supply chain structure by
adding the corresponding production, transportation, goods receipt, and goods
issue times. If there are alternative procurement options, the system always
takes the
longest
option into account.
Master Data
The system determines the RLT forecast from the location product master
data.
Master Data/ Supply Chain
First, the system determines the RLT forecast from the location product
master data. If no RLT forecast can be determined, the system determines the
forecast using the supply chain structure (as described under
Supply
Chain
Dependencies
You can retrieve the replenishment lead time forecast yourself by using the
GET_LEADTIME
method of the Business Add-In (BAdI) /SAPAPO/SNP_ADV_SFT.
Replenishment Lead Time in Calendar Days
Number of calendar days needed to obtain the product, including its
components, through in-house
production or external
procurement.
Use
The replenishment lead time (RLT) is used in the enhanced methods of safety
stock planning in Supply Network Planning (SNP). The goal of safety
stock planning is to comply with the specified service level, in order
to be prepared for unforeseen demand that may arise during the replenishment
lead time. The longer the RLT, the higher the planned safety stock level.
Dependencies
The field is taken into account by the system only if you have specified
master data or master data/supply chain in the RLT: Determine
Forecast field of the safety stock planning profile used.
Hope this helps.
The RLT from ECC is in MARC-WZEIT which is transferred to APO in structure /SAPAPO/MATIO field CHKHOR.
May be if you maintain the setting in the profile, you may get the value in RELDT.
Thanks. -
Issue in CIF data between ECC to APO
Hi Experts,
We have ECC and APO system in our landscape. we have configured CIF and transferred data between ECC and APO however after ECC system refresh CIF configuration is not working. we verified and reconfigured the CIF configuration but still no luck.
strange thing is, while sending the data for e.g vendor from ECC to APO, there is no error reported. It displays successful in both qRFC trace files but the transferred data is nt reflecting in APO system.
There is no system run time error, no errors in system log (SM21), no logs in SLG1 application log, no erros in qRFC trace files.
we have enabled RFC user trace but can't conclude the issue. could you please anyone let me know where we can check the error log or how to resolve this?
Outbund Queue logs from ECC:
QTYPE :OUTBOUND/S
DATE TIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:44:56 300 20.03.2015 17:44:56 N N
0A1A01720F70550C0F4019E7 SENDING
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
QTYPE :OUTBOUND/S
DATE TIME EXETIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:44:57 00:00:01 300 20.03.2015 17:44:56 N N
0A1A01720F70550C0F4019E7 CONFIRMD
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
QTYPE :OUTBOUND/S
DATE TIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:44:57 300 20.03.2015 17:44:56 N N
0A1A01720F70550C0F4019E8 SENDING
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_GEN_EVENT
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
QTYPE :OUTBOUND/S
DATE TIME EXETIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:44:57 00:00:00 300 20.03.2015 17:44:56 N N
0A1A01720F70550C0F4019E8 CONFIRMD
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_GEN_EVENT
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Inbound Queue trace log from APO:
QTYPE :INBOUND
DATE TIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:39:48 300 20.03.2015 17:44:56 N N
0A1A01720F70550C0F4019E7 SENDED
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
QTYPE :INBOUND
DATE TIME EXETIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:39:48 17:39:48 300 20.03.2015 17:44:56 N N
0A1A01720F70550C0F4019E7 FINISH
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
QTYPE :INBOUND
DATE TIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:39:48 300 20.03.2015 17:44:56 N N
0A1A01720F70550C0F4019E8 SENDED
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_GEN_EVENT
QTYPE :INBOUND
DATE TIME EXETIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:39:48 17:39:48 300 20.03.2015 17:44:56 N N
0A1A01720F70550C0F4019E8 FINISH
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_GEN_EVENT
QTYPE :INBOUND
DATE TIME EXETIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:39:48 00:00:00 300 20.03.2015 17:44:56 N N
0A1A019D23F8550C0E0C2559 0A1A01720F70550C0F4019E7 RUNNING
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_LOC_INBOUND
QTYPE :INBOUND
DATE TIME EXETIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:39:48 00:00:00 300 20.03.2015 17:44:56 N N
0A1A019D23F8550C0E0C2559 0A1A01720F70550C0F4019E7 FINISH
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_LOC_INBOUND
QTYPE :INBOUND
DATE TIME EXETIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:39:48 00:00:00 300 20.03.2015 17:44:56 N N
0A1A019D23F8550C0E0C2559 0A1A01720F70550C0F4019E7 CONFIRMD
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_LOC_INBOUND
QTYPE :INBOUND
DATE TIME EXETIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:39:48 00:00:00 300 20.03.2015 17:44:56 N N
0A1A019D23F8550C0E0C255A 0A1A01720F70550C0F4019E8 RUNNING
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_GEN_EVENT
QTYPE :INBOUND
DATE TIME EXETIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:39:48 00:00:00 300 20.03.2015 17:44:56 N N
0A1A019D23F8550C0E0C255A 0A1A01720F70550C0F4019E8 FINISH
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_GEN_EVENT
QTYPE :INBOUND
DATE TIME EXETIME CLIENT USER QDATE QTIME BJOB QEVENT
TID ORGTID QSTATE
DEST ERRMESS
20.03.2015 17:39:48 00:00:00 300 20.03.2015 17:44:56 N N
0A1A019D23F8550C0E0C255A 0A1A01720F70550C0F4019E8 CONFIRMD
<SID>CLNT300
LUWCNT QNAME FNAM
00000001 CFLDSHQCLNT300_0014 /SAPAPO/CIF_GEN_EVENT
Thanks and regards,
PradeepHello Pardeep,
Please check the setting of SMQS and SMQR for CF and client registration
these entries, the field 'TYPE' is set to 'R'.
QIN scheduler may be available for every client if you are working in this client with registered inbound queues.
Choose Edit->Activate scheduler from the menu (available in both SMQR and SMQS)
During processing in dialog work processes, the system uses a parallel RFC to restart the registered inbound queues. For this, you can use transaction RZ12 to specify a group of application servers and dialog work processes that are allowed to use a QIN scheduler. You must use transaction SMQR to assign the group name to the relevant QIN scheduler.
Different parameters in SMQR are explained in note 1579728. The explanation for SMQS is similar
Also try the report RSQIWKEX
Best Regards,
R.Brahmankar -
Master/Transaction data from ECC to APO-BW
Hi All,
Normally we come across scenarios where Master/Transaction data is pulled from ECC to BW and then pulled into APO-BW. What are the pros and cons of CIF (direct connection between ECC and APo-BW) rather than pulling data from ECC to stand-alone BW and then into APO-BW?
Regards,
JoyHi Santhana,
If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
1. Create Generic Data Source in ECC for thet Sales Order table.
2. Replicate that data Source in to APO BW with Source System.
3. Create whole data flow process by using created Data Source.
Data Flow Process: 1. Info Package
2. Info Source
3. Info Cube
4. Transformation between DS & IS, Then IS & IC
5. Data Transfer Process.
4. Load data from ECC to APO BW
5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
Hope this will help you.
Regards
Sujay -
Hi,
I have fetch to data from ECC custom table to APO and create data, can anyone let me know the procedure.
Thanks in advanceHi Santhana,
If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
1. Create Generic Data Source in ECC for thet Sales Order table.
2. Replicate that data Source in to APO BW with Source System.
3. Create whole data flow process by using created Data Source.
Data Flow Process: 1. Info Package
2. Info Source
3. Info Cube
4. Transformation between DS & IS, Then IS & IC
5. Data Transfer Process.
4. Load data from ECC to APO BW
5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
Hope this will help you.
Regards
Sujay -
Transaction data from ECC to APO DP
Dear All,
Can you tell me if i can directly load transaction data directly from ECC to APO BW Infocube.
For example i want to load say sales orders from ECC.
Can i directly load from ECC --> APO BW Infocube --> DP Keyfigures.
Or any staging is required inbetween ECC and APO BW
Thanks
Santhana.Hi Santhana,
If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
1. Create Generic Data Source in ECC for thet Sales Order table.
2. Replicate that data Source in to APO BW with Source System.
3. Create whole data flow process by using created Data Source.
Data Flow Process: 1. Info Package
2. Info Source
3. Info Cube
4. Transformation between DS & IS, Then IS & IC
5. Data Transfer Process.
4. Load data from ECC to APO BW
5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
Hope this will help you.
Regards
Sujay -
Error in Data Transfer Process (DTP) Urgent!
Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nipsPlease do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent! -
Errors in data transfer process
Hi,
i'm getting "Errors in data transfer process" message when i try to run conntrans. when i see the detials error log in trouble shooting ( in client console), i get this following message in detials ( see the bold letters). can some one help me. i have check all the connections between mobile and CRM server. will reward points!!!
2324 96c ! Entering 'PullMessages' for queue 'CRM_SITE_000000000000274' / limit 20 messages
2324 96c Fri Aug 24 20:28:22 2007 E
NewTransferService - _TransferPullMessages : <b>DotNet Stub.TransferPullMessages call failed with fffffffa:</b>(null)
2324 96c E
_TransferPullMessages failed with fffffffa
2324 96c Fri Aug 24 20:28:23 2007 E
regards
Kamalesh K.VHi,
We have installed MSA 4.0 (SP12 ). we have also checked QMT config in Mobile sales bin folder. The test connection is sucessfull.( see the below message). we stil have problems in Data transfer when we run connstrans. Please help .
<b>" NewQmtCnfg Version 2.0 for Windows 2000 - revision 4003
Assume running on Client
1. Try to access Communication Station 'MTV01sdCR02', please wait...
... OK
Try QmtServer component initialize check, please wait...
...OK: QmtServer initialize call returns successfully
2. Try to access CRM Server (Destination '<DEFAULT>'), please wait...
...OK: CRM Server call returns successfully</b>
regards
Kamalesh KV -
Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required
Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!error is clear, check your abap code.
-
I recently had a data transfer from my older mac to my newer one. After the transfer I logged into my new account and opened up my GarageBand. It worked perfectly fine, however when I logged into my old account with all my older data that I just transferred over, I could not open my GarageBand files and there is an error that states "GarageBand error after data transfer that states "This song requires a newer version of GarageBand. Please update to the latest version of GarageBand before opening this song".If anyone could please help me with this issue, I'd greatly appreciate it. Thank You!
When you transferred your data from your old mac, you may have accidentally transferred an older GarageBand version and either overwritten your newer version, or your old account still has the old GarageBand icon in the Dock.
Search with SpotLight, if you have more than one Garageband version on your new Mac (type "GarageBand" into the SpotLight search field). Does it list more than one GarageBand version? Then delete the older GarageBand.app.
What GarageBand version have you been using at your old mac, and what is the version on your new mac? If it has been bought recently, it should have come with GarageBand '11.
Regards
Léonie -
CIF of transaction data from ECC to APO
Hi,
I wanted to know where we maintain the configuration for real time transfer of transaction from ECC to APO.
I know for master data we have an option in CFC9 for real time/periodic transfer. Is there any similar config for transaction data too like sales orders etc.Hi Alok,
To allow online transfer of changes to transaction data from SAP R/3 to SAP APO, you have to activate generally the BTEs in SAP R/3.
This is done in R/3. This is the path:
SPRO --> Integration with Other SAP Components --> Basic Settings for the Data Transfer --> Change Transfer --> Change Transfer for Transaction Data --> Activate Online Transfer Using BTE
You can read about it here:
Change Transfer for Transaction Data - Integration via APO Core Interface (CIF) - SAP Library
Then of course you will need to generate and actiave your IModels.
Kind Regards,
Mariano -
Error with data transfer configuration in solution manager
Dear SAP Support
i have a problem when i enter a tcode solution_manager > goto > data transfer configuration in my sap solutin manager system. the error appear
The requested URL could not be retrieved
While trying to retrieve the URL: http://solman.wilmar.com:8000/sap/public/myssocntl?
The following error was encountered:
Unable to determine IP address from host name for solman.wilmar.com
The dnsserver returned:
Name Error: The domain name does not exist.
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
Your cache administrator is webmaster.
Generated Sat, 15 Sep 2007 10:03:30 GMT by proxy (squid/2.5.STABLE11)
are there any solution so i can fix my problem above. thanks.Hi Herry,
Are you working in the same network?
Are you able to ping the domain?
Just an idea.
Regards, Ruediger -
Errors druing Data Transfer process
Hello!
I go through the SAP BW example and have the following error by generating Data Transfer process.
I have corrected the errors (from "EURO" to "EUR") in CSV-files, but I get still the errors:
No SID found for value 'EURO ' of characteristic 0CURRENCY
No SID found for value 'U1 ' of characteristic 0UNIT
I have recreated the flat files/.csv-files, deleted and created the info cube, but the error still occurs.
What are the steps to fix the error?
How can I know which data source contains the error?
What are the possible values for 0CURRENCY and 0UNIT?
Can some one give some recommendation?
Thank you very much!
rergards
ThomHello,
You need to delete the data from PSA after an Unsuccessful load, if you want to load it again after correcting data in the source (Flat file in ur case). Right click ur datasource->Manage. Select the request which failed and hit the delete button (trash) at bottom. Now try loading it again.
To get all possible values of currencies and units defined in your system. check contents of following tables:
TCURC - Currency Codes (field -WAERS)
T006 - Units of Measurement (field - MSEHI)
Thanks -
Spool error while data transfer
Hi,
I am trying to give barcode print, I am using Zebra S600 printer. when I issue the print with new spool request & print immediately, System is generating the spool but with error as Internal Error when printing ,Request on hold
Error class: delayed
Area: data transfer
I tried with SPAD also. How to solve this error.
Thanks & Regards,
Karthik.kHello,
Can u please tell me it is front end printer or remote printer and also please check that u have installed correct Printer driver.....
if possible then give one demo printout from u r machine instead of from SAP....
Thanks -
CIF STEPS to load data from ECC to APO from Process chain
Hi,
i try to create on ECC system a process chain in order to execute the CIF program for updating APO Material/Plant Master data on DELTA mode .
I am not sure that the procedure is correct, at the moment i put on a chain:
- Step 1 Program RIMODGEN with a specific variant
-Step 2 Program RIMODACT2 with a specific variant.
Is necessary a third step with RIMODACT2 in order to deactivate the integration model?
On APO we have to insert other standard step in order to complete the delta update?
Any experience on similar situation?
Thanks,
VeronicaVeronica
You do not need a third step. You do not need to deactivate the model. In fact, it is not recommended to do so. You do not need any step in APO.
If your CIF setup is correct, the first two steps should be enough.
If by 'Delta', you mean field value changes to material/ plants in an existing integration model, you dont even need to do CFM1/ CFM2 if you have setup transaction CFC9 for BTE (online transfer).
Rishi Menon
Maybe you are looking for
-
Hi All, I was playing Street Fighter on iPhone 4 (iOS 6) whilst i was playing i received an incoming call which i declined, but post that the volume of the game went into mute and couldnt hear a thing. I pressed the home button, then double clicked i
-
Safari crashes every time I click it
Hi! I was recently downloading a copy of camtasia 2. When I was installing it my safari kept crashing so obviously I stopped the download. It continues to crash and I was wondering if anyone had a solution. Here is the report: Process:
-
why when i go on safari at the top of the web page there is a sign saying Debug console "NO ERRORS" why does this happen also a person called us saying that our ipad has a virus what should i do ??
-
All my Aperture 3 album gone...
I am having 10 over album in my Aperture 3 I export one of my album to my desktop last night And this morning, I accidentally double click my exported album that on my desktop It launch my Aperture 3 But, I found that all my album gone, I can only se
-
I'm trying to reinstall lightroom
I know that at some point I have to uninstall it front he current computer so that I may install it to my Mac, but I have comet to he point were I need to put in my serial number. When I tried, it basically told me it was not accepting it. Does that