How to keep file name formatted?

I need to generate  .xlsx file as reporting purpose without renamed for
example :- File names end with YYYYMMDD format for the day they are generated.
Is that possible I can set up that kind of job? 

see
http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Similar Messages

  • How to keep file name in print queue when printing crystal report

    We are using VB .Net 2003 + Crystal Report 2008 SP2 up to Fix Pack 2.6
    When the VB program spools crystal report files to print queue, the print queue only shows "Crystal Report" for each document.  How to keep the original file name?  In the past when we were using Crystal Report 11, the original file name can be shown in the print queue.
    Please help because it's so important for operation to see which report is failed in printing when reports are printed in batch.
    Thanks

    Hello,
    Set the PrintOption.JobTitle value for the print job. Here's C# code on how to:
                   System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
                CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
                CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
                   pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;          
                   rasPROpts.PrinterName = cboCurrentPrinters.Text;               
                   rasPROpts.PaperSize = (CrPaperSizeEnum)
                        pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
                // this sets the name of the print job
                rasPROpts.JobTitle = "MYPrintJob";
                   rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
                   MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
    Thank you
    Don

  • How to keep file name on "Insert as new"

    If a record has a related file, the file-name is stored in a field of that record.
    When you open the record and choose "Insert as new" everything is copied to a new record, except this file-name.
    How to save this file-name too?
    thanx

    Hello,
    Set the PrintOption.JobTitle value for the print job. Here's C# code on how to:
                   System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
                CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
                CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
                   pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;          
                   rasPROpts.PrinterName = cboCurrentPrinters.Text;               
                   rasPROpts.PaperSize = (CrPaperSizeEnum)
                        pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
                // this sets the name of the print job
                rasPROpts.JobTitle = "MYPrintJob";
                   rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
                   MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
    Thank you
    Don

  • Rename file name & format using ftp sender

    Hi all,
    This is regarding the renaming of file at sender file(FTP) communication channel and placeing the same file in the same folder.
    At FTP server at sender side (i.e.clients place) is in .txt format.But now .txt file has to rename and change into .sav foramt with below required name convention of file.
    client format is  :  SAP_Order.txt (Pervious file name).
    We need to change the file in to "SAP_Order_yyyymmddThhmmss.sav" format..
    How can i achieve this requirement?
    Can please suggests me solutions ASAP.
    Best Regards,
    satya,

    Hi,
       if your requirement is to pick the  existing file in the FTP folder...and send as idoc to the target and place the renamed file to FTP folder...
    then its simple...
    use two receivers instead of one , one for point to target and other for sender itself... (second receiver  is for  changing  the file name format....)
    Hope the above understanding is correct...if not provide more details of your requirement...
    HTH
    Rajesh

  • Custom File Name Format in B2B Console

    Hi,
    Please let me know if we can have a customized File Name Format in the B2B Console for the X12 EDI/XML Files.
    I have read the Oracle doc and only the following formats are mentioned:
    %FROM_PARTY%
    %TO_PARTY%
    %DOCTYPE_NAME%
    %DOCTYPE_REVISION%
    %MSG_ID%
    %TIMESTAMP%
    Is there a way to have a PO# (From the Trading Partner Payload) in the filename format?
    You help is appreciated.
    Thanks
    Priyanka G

    no. It has the format which helps B2B in identifying the agreement

  • File name format of rotated access log

    Hi,
    I'm using wls5.1sp9 on Solaris.
    Is it possible to specify a different file name format of the rotated http access
    logs?
    Instead of getting files named access.log0001 and so on, I would prefer access.log.<date>
    or some other custom format.
    Best regards,
    Torleif Galteland

    Hi,
    Thanks for your response. But I have another query. The name of the file as per your reply is like UsageReport.xls correct? Now my query is, should it contain some date,account id/orgid etc associated for that usage. The reason for my query is that if MSP
    downloads the usage for different orgs having same bill date then it would conflict with the different usage files.
    Thanks And Regards,
    Sumanta Saha

  • IPhoto: After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file.

    After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.

    Hmm the advice has been not to use referenced libraries - you ignored and did it anyway and you find the advise not helpful
    Furthermore the advice is that if you choose to use a referenced library that you assure that the path never changes - you also choose to ignore that advice and do it anyway - and you blame the peopson trying to help you
    once again - you have one choice - change the file names back and put the files back in the exact same place - and again you are totally ignoring the advice and instead name calling and attacking the person giving you advice
    Maybe life would be easier if you followed advice rather than ignoring it and then complaining that things no longer work
    change the name back and you will be fine until the next problem you hit that is caused by choosing a referenced library
    Have a nice day
    LN

  • Run Applet On Server Using 8.3 File Name Format

    Hello Everyone,
    I am currently trying to produce an applet that will display content from a PLC (which hosts its own webpage).The PLC itself only allows files using the 8.3 file name format to be stored on it (eg. 123456789.123).
    I have tried a few simple things, such as changing the ".class" file extension to ".cls". But this just produced an error in my internet browser (IE 8).
    Any help and/or work-arounds would be greatly appreciated.
    Thank you,
    Vincent Wiebe

    849427 wrote:
    ..I did not think of that, ..That's why forums rock. Many minds are better than one. ;)
    Thank you very much :)You're welcome. :-)

  • How to place file names with thumbnails?

    I have several thousand images that need to go online but I cannot for the life of me figure out how to add file names to the thubnails. Every bit of documentation I've read talks about adding it to the larger images only. I figured that part out but can't I have file names for the thumbnails too?

    Bummer. I was hoping for a secret key to take me there. I have too 
    many images that can be scanned via thumbnails and for the detail 
    shots they can go larger. There is no way I can use this as it is with 
    9000+ images that need to be gone through quickly. Thanks for the 
    answer.
    Mark

  • How to edit file names.

      How to edit file names.

    Right click the file and choose "Rename".
    Type the new name and press "Enter".

  • The file name format for Voice Memos has changed - how can I change it to the original format?

    The file names for the voice memos changed in the last update.  Now the day is first, which means when you sort them in a file folder, they sort by the number of the day and not year - month - day as before.  Is there a way to change it back?

    Restore it as new or sign out of that account and into yours.  Both are covered in the manual.
    http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

  • Using Actions to SaveForWeb: Unable to keep file name

    ENVIRONMENT:
    start with an AI document, saved as an eps.
    I have Actions to format the graphic. (one layer)
    GOAL:
    Am trying to automate a Save For Web, resize and KEEP THE FILE NAME, with only the file TYPE changing.
    PROBLEM:
    I wrote an Action specifying a particular folder to save the jpg to. If i run the Action it will default to the name it was originally saved with. For example, one.eps will save as one.jpg. two.eps will save as one.jpg.
    If i delete or rename the folder, the file name will default to the FOLDER NAME. For example one.eps will save as "ExportFolder.jpg"
    MY QUESTION:
    Does anyone know how to make it keep the file name of the individual file? or any other tips on using Actions to export.
    Thanks.

    I understand what you are saying but for some reason I'm not able to get my code working based on the below, can you see what I might be doing wrong?  My script isn't erroring  but I'm second-guessing if I'm actually connecting.  I had to
    use the webclient in the Get-FtpDir otherwise the script would fail.  Thanks!
    $url = "ftp://##.#.#.#/"
    $user = "username"
    $pass = "123456" 
    $credentials = new-object System.Net.NetworkCredential($user, $pass)
    $webclient = New-Object System.Net.WebClient
    $webclient.Credentials = New-Object System.Net.NetworkCredential($user,$pass) 
    $target = "\\computername\C$\FTP\Download\"
    function Get-FtpDir ($url,$webclient) {
        $request = [Net.WebRequest]::Create($url)
        $request.Method = [System.Net.WebRequestMethods+FTP]::ListDirectoryDetails
        if ($credentials) { $request.Credentials = $credentials }
        $response = $request.GetResponse()
        $reader = New-Object IO.StreamReader $response.GetResponseStream()
     $reader.ReadToEnd()
     $reader.Close()
     $response.Close()
    $folderPath="ftp://##.#.#.#/folder/folder/"
    $files=Get-FTPDir $folderPath
    Foreach ($file in ($files | where {$_ -like "Test_*.txt"})){
     $source=$folderPath+$file
     $WebClient.DownloadFile($source, $target)
    CINDI

  • Output file name format

    Hi All,
    How can i configure output file name to the desired format generated in target directory in communication channel configuration in conf scenario.
    ex: i want to generate the file in the below format..
    YYYYMMDD_<Receiver>.TXT
    Thanks and Regards
    Venkatesh

    Hi,
    This is the UDF u have to write in Mapping,
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key =
    DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return  ourSourceFileName;
    Using this u will get the File name into target side,In this UDF add the Time stamp.
    Check this link for more details.
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    Regards,
    phani
    Reward points if Helpful

  • 8.3 file name format

    Hello
    I need to execute a dos program from java application. I want to use the following sentence:
    Runtime.getRuntime().exec("cmd.exe /c start " + mySentence);
    My problem is I need path and file names in 8.3 format (by example Program Files -> Progra~1).
    My question is: �How can I to obtain this short name for path and filename?
    Many thanks for your help

    If you really want the 8.3 path, you'll need to use JNI - take a look at the GetShortPathName() Win32 API call.
    However, for what you are trying to do, I think all you need to do is put quotes around the path you are trying to execute - i.e.:
    Runtime.getRuntime().exec("cmd.exe /c start \"" + mySentence + "\"");
    <RANT>Why MS decided that it's OK to have spaces in a path/filename is just beyond me... it adds very little to the user experience and makes parsing the darned things almost impossible...</RANT> :-)
    - K

  • How to retain File Names in B2B

    Hi,
    My requirement is to FTP a file from Source system to an Target System through B2B.
    Eg. Say Customer_PO.xml has to be FTP to DELL using B2B from SONY.
    Customer_PO.xml (SONY ) ->B2B ->Customer_PO.xml ( DELL )
    So here when we transfer the file through B2B, the file name will change either to TO_PARTY (DELL.xml ) or FROM_PARTY (SONY.xml) depending on the Filename format configuration in B2B and we don’t want this to happen.
    We want to retain the File Name as it is from source to target as Customer_PO.xml only.
    Please advise us on this.
    Thank you in advance.
    Kanth

    I am not sure how much this applies to your scenario, but you can refer here
    Dynamically naming a file using a send operation in B2B
    Kathar

Maybe you are looking for