Finance General Ledger dashboards data is missing.

Hi,
I have noticed a strange behaviour related to data loads and data visibility through the Financials Analytics dashboards.
Let me please begin with an empty target schema.
I run the first load having the General Ledger subject area (Full Load=Y). When it's successfully completed, I can see data in most of the tabs of the GL dashboard. In the Profitability dashboard, I can see P&L statement with data.
However, when I run further loads for other subject areas like - paybales, receivables, revenue, cost of goods sold, supply chain, etc., I see, gradually, empty GL dashboard across its tabs. I can not see the P&L statement with data, too.
I take an export of the schema at the end of each load and create a log for each of the export. I compare the logs and can conclude that there is no loss of data (W_GL_OTHER_F) because of, may be, the next loads that I usually do. There is no data in W_TAX_XACT_F from the first load. I notice that due to the next loads more tables are populated with data or the tables with the data have more rows. So, there is no reduced number of rows in the tables because of the next loads.
When I 'modify' the reports in BI Answers by removing all the filters, I see no data, there, too.
Does anyone have an idea what the is the issue here? Am I looking at the right database tables?
Please let me know.
Thanks and regards,
Manoj.
Edited by: mandix on Oct 8, 2008 4:48 AM

Hi,
Adding an input to my message.
I created the same target schema in a different database and imported the first dump (GL subject area, full load = Y) into this. I am now pointing to this schema via the ODBC datasource on the BI Server server. It shows me all data in all the tabs of the GL dashboard and also, I can see the P&L statement in the Profitability dashboard, too.
So, after the first load, I can see the data in GL dashboard tabs and the P&L statement but once more subject areas are loaded, then the GL data and P&L statement disappears. My issue still remains.
Edited by: mandix on Oct 8, 2008 4:52 AM

Similar Messages

  • After Successfull Load ETL for General Ledger No data showing in Warehouse

    After Successfull Load ETL for General Ledger No data showing in Warehouse Tables
    DB Version # 11.2.0.1.0 and OS of Warehouse Microsoft Windows Server
    2003 R2 Enterprise Edition Service Pack 2, v.4922
    1. BI Apps version
    Release 7.9.6.3
    2. BI Apps module
    Financials
    3. Source system and version
    EBS R12.1.2
    Please help me out .......

    Hope you have done finance config as per the link
    http://docs.oracle.com/cd/E20490_01/bia.7963/e19039/toc.htm
    List out the tables with row count=0, get the sql override query and execute in source to see # records for tables ending DS or FS where row count=0
    do the same for tables ending with _D using warehouse db.
    If fact tables are getting 0 records check the w_day_d table.
    let me know updates.
    If helps pls mark.

  • General ledger transactional data extraction

    Hello all,
    My client has a need to extract all the general ledger transactional data from SAP system  to an external system ( to a hard disk or to a DVD) for future audit purpose, how can we achieve this,
    Please give your valid inputs

    tables BKPF & BSEG cover everything.
    might be better to use reports RFBELJ10 or RFHABU00
    depends what they want to see

  • General Ledger veiw button is missing at the time doc. entry

    Hi,
    i am facing a problem in ECC 5.0, that the general ledger view button is not displayed at the time of FI document entry, or in T. Code FB02 or FB03. Document Splitting is active in company code.
    Please suggest what could be the possible reason.
    Thanks

    Dear,
    Dhananjay.
    Greetings for the day !
    I got a solution for your problem I hope it will help.
    Please follow the path as I said.
    SPRO- Financial Accounting New- Asset Accounting---- Valuation---- Depreciation Area-- Define depreciation area.
    Execute.
    Select Define Depreciation area.
    1 ) For area 1 in GL column it must 1 that is area post in real time.
    2 ) Select that area click on details button.
    3 ) Posting to GL must be 1 Area post in real time.
    4 ) Acquisition value :- All values allowed.
    Please see these settings are available or not ?
    If not please maintain so error will be flush out.
    I hope this solves your issue.
    Please revert for further clarification.
    Regards,
    Pankaj.
    Edited by: pankaj_ab on Sep 18, 2009 8:52 AM

  • Change description general ledger master data not possible for some languag

    Hi all,
    We have a lot of language translation on tab Key word/translation for all G/L accounts. English is our log in language. When we want to change the description in Finnish, Norwegian and Danish this is not possible (this lines are grey, only display mode). We can´t remove these lines and we can´t change them. It is possible for all other languages except this languages and English. Does anyone have a clue why this is not possible?
    Thanks in advance!
    BR L

    Hi Lisa,
    I was asking if you can maintain a new description (for an account number where no description in one of the mentioned languages is entered) so the message "Description already exists in language XX" should not appear in that case...
    In general, account descriptions are stored (for chart of accounts / language key) in table SKAT thus you can check the entries already available.
    Did you contact the user-authorization responsible which authorization objects are assigned? FS00 contains authorization objects for account auth. group (F_SKA1-BES), company code (F_SKA1_BUK) and the whole chart of accounts (F_SKA1_KTP), maybe some change authorization (activity 02)  is missing?
    Best regards, Christian
    Edited by: Christian Ortner on Nov 22, 2010 1:06 PM

  • Load of EBS Supply Chain data deletes data for General Ledger

    Hi,
    we are trying to load data from EBS 11.5.10 to BIAPPS 7.9.6. We have loaded data to Financials Subject Areas (Budget, Financials - COGS, Financials - General Ledger, Financials - Payables, Financials - Receivables) using pre-defined execution plan Financials_Oracle 11.5.10 and data has been successfuly loaded and shown on dashboards.
    Later we have loaded data into Supply Chain Subject Areas (Employee Expenses, Financials - Payables, Supply Chain - AP Invoices, Supply Chain - Purchase Cycle Lines, Supply Chain - Purchase Order, Purchase Receipt, Purchase Requisitions) using pre-defined execution plan Procurement and Spend: Oracle 11.5.10. After this load data are visible on Procurement and Spend dashboards but previously loaded data on Financials - General Ledger dashboards are missing.
    So we have loaded data to Financials again which brought Financials data back to dashboards but data for Procurement and spend disappeared.
    We have also trying to load all data using Complete Oracle 11.5.10 execution plan. After this load most of the dashboards for Financials and Procurement and spend are empty.
    And finally we have created our own execution plans for Financials, Supply Chain and both and tried the same scenario. The results are the same. It seems to me that load of Financials data deletes Supply Chain data and vice versa.
    Can somebody advice how to load data for Financials and Supply Chain together?
    Thanks a lot, Petr
    Edited by: user793851 on Oct 23, 2009 11:02 AM
    I have to add new info: the all data are back and visible after the night. We didn't perform any actions. Does anybody know about some settings which can cause such behaviour?
    Many thanks,
    Petr

    Try the BI Apps forum: Business Intelligence Applications

  • OBIA Financials - General ledger

    Hi
    We had a new Obia installed in our environment, I am unable to see the reports when I open the General ledger Dashboard, It is giving the below error.
         No Results
         The specified criteria didn't result in any data. This is often caused by applying filters and/or selections that are too restrictive or that contain incorrect values. Please check your Analysis Filters and try again. The filters currently being applied are shown below.
    But when I remove a filter named Trailing Four Fiscal Quarters it is showing some data.
    So Please help me what is this Trailing Four Fiscal Quarters filter and what should I do to get some data displayed on to the dashboard.

    You need to build the EP in DAC for Financials Modules by modifying the data in csv files under srcfiles with respect to source data/instance which you want to use. Make sure that the Fact tables are loaded inorder to see the data in reports for the Fiscal years which you want to see the data.You need to do a Full Load inorder to have complete data available in reports.
    You can follow the guide http://docs.oracle.com/cd/E20490_01/bia.7963/e19039.pdf from section "5.2 Configuration Required Before a Full Load for Financial Analytics" for running teh full load.
    Mark as helpful or correct, if it helps
    Thanks,
    RM

  • Difference A/R subledger vs. general ledger

    Hello Experts,
    There is the difference  between A/R subledger and  general ledger when data is migrated from another system , Can you tell me Why this difference Occurs.
    Direct input in control account possible ?

    Dear,
    GL Direct inputs aren't allowed in Subledgers Accounts.
    In order to analyse missing entries, check your number of entries in tables: BSID and BSAD for A.R. and BSIS and BSAS for GL reconciliation Account.
    let me know if it was helpful.
    regards

  • General Ledger Budget Extractor

    Hi,
    Is there a BC extractor for extracting General Ledger budget data?
    I looked at help.sap.com and I couldnt find any thing.
    Thanks,
    Ravi.

    There isn't any standard extractors for planned (budgeted) General Ledger values, per se. If these budgeted values are posted as accruals, to future Fiscal Year/Periods, to the General Ledger in your R3/ECC source environment, the standard content DataSources for General Ledger will pickup that data.
    If the General Ledger budgeted values aren't being posted as accruals to future Fiscal Year/Periods, then where are they being posted to in your source R3/ECC environment?

  • Updating MSL(Quantity) field in FAGLFLEXA (General Ledger view) .

    Hey guys,
    We would like to update Quantity field(MSl) in general ledger view table(FAGLFLEXA) while creating accounting document from billing document.
    While Creating billing document , we are trying to pass SD data into Accounting document .i.e.The quantity (MENGE) in  table  BSEG is updated when we pass the data in to interface structure XACCIT-MENGE using enhancement SDVFX004 - - EXIT_SAPLV60B_004 . but we didn't see MSL field in ACCIT structure, so how to update General ledger view data while creating Billing document.
    Is there any other user exit or BAdi or any ideas...?
    thx.

    Hi i have checked both the settings
    1) FI financial accounting  financial accounting global settings ledgers fields Display scenarios for GL accounting
    2)FI financial accounting  financial accounting global settings ledgers fields ledger Assign scenarios and customer fields to ledgers
    In both these transactions FIN_PCA is present (Profit center update ) is there .Is there any other place where i should check anything ?

  • Requirement of  General Ledger Trial Balance Detail Report Date wise

    Thanks for your reply
    We have to requirement of General Ledger Trial Balance Detail Report Date wise.
    Please help for that.
    Thanks.

    Take sum(Accounted_dr) - Sum(Accounted_Cr) till the Accounting Date..... from GL_BALANCES
    Edited by: 924750 on Sep 16, 2012 3:42 AM

  • Best practice for retraction of data from BPC 10.0 to General Ledger

    Hi All,
    I have the requirement to retract data from BPC 10.0 to General Ledger.
    What is the best practice for doing this?
    I have read the "How To... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting, Part I", but this is prepared to transfer data to Cost Center accounting. Will General Ledger be populated automatically?
    What is your opinion on this?
    Best regards,
    JA

    Hi Rich,
    In BPC 10 NW, the data entered in Input Forms has to be retracted to ECC.
    For this retraction we are following below link.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73?QuickLink=index&overridelayout=true&59180354379512
    In this document, I am unable to get the details of class ZCL_BPC_RTRCT_SUPERCLASS.
    as it is Z class, i am unable to create in my system.
    could you please help me.

  • Line Items Data Source for General Ledger

    Hello everybody,
    I'm trying to generate a Data Source for Line Items (new General Ledger) in transaction FAGLBW03. When I generated a Total Record-Data Source, everything was done correctly. When I try to generate a Line Item-Data Source, I receive following error message: "Extractors for general ledger documents are not yet supported". I was looking for any SAP notes that would explain this issue, but I couldn't find anything.
    Could you please tell me how can I generate Data Source for Line Items? Add some SP, use some another transaction, ...?
    Thank you for any help
    Janule

    Hi,
    Can u tell me how did u solve that problem.
    i m facing same.
    /sachinkumar.

  • GL date in General Ledger Transfer  screen

    How GL date will be populated while running INCTGL transfer program for inventory in General Ledger Transfer screen?
    How GL date will be populated differently for different orgs?

    Hi,
    Check if the Journal source/category for the particular inventory org (TRK-Tuticorin) is present or not and its status ... Source : Inventory , Category : <xxxx>.. Take a export of Source (Inventory) and Category of TRK-Tuticorin and compare with other inv org.
    /S.P DASH

  • Finance Reports - General Ledger - Revaluation

    Dear all
       What is the use of Revaluation button in General Ledger Report,Give me some example for understand this.
    By
    Prasanna.s

    This button is for FC revaluation.  You can find related info in the online help. Here is part of them:
    FC Tab
    Currency: Choose the currency to which you want to revaluate.
    Revaluation Method: Choose whether to calculate the revaluation according to the rate defined in the Posting Date or Due Date of the transaction, or according to Fixed Rate. If you choose the last option, enter the required fixed rate.
    Average Rate from Interval (in Days): Specify the number of days for calculating an average rate in case an exchange rate was not defined for a specific date.
    Refer to Rates in Posting (Journal Entry): Select this check box to use the rate defined in the journal entries, if it is different from the rate defined in the Define Foreign Currency Exchange Rates window.
    Revaluate Multi-Currency: G/L Account/BP Multi-currency accounts and business partners must have their values converted to one currency before they can be revaluated.
    Select whether to revaluate multi-currency G/L accounts or business partners by local currency or by system currency.
    Thanks,
    Gordon

Maybe you are looking for