FixedColumncount in sap.ui.table.table is not available in sap.m.table

Hi,
        i have a requirement of enabling fixedcolumn count in sap.m.table which is available in the sap.ui.table.table
is there any way to make it available in the sap.m.table...if so please share this will be reallly helpful for me
thanks in advance
Regards
Raghu M

Hi Santhosh,
               Thanks for the quick response.
               I understand what you said.But in my case the table has to render on desktop,tablet and phone bcaz of that only i chose sap.m.table
               And using sap.m.table is also my requirement.so if you have any way of doing that plz do share
thanks
Regards
Raghu M

Similar Messages

  • Is there any table or report that available in SAP for any PR/STR

    HI All,
    Is there any table or report that available in SAP for any PR/STR that are remain opened after S/O canceled.
    Please advice at the earliest.
    Thanks
    Chandru

    Chandru,
    Of course.  The standard MD06 transaction will display ALL MRP generated exception messages, and will take you to the individual material to allow you to determine how you wish to respond to it.
    So, MD06>enter the plant.  Optionally, enter the controller if you wish to limit the results by planner.
    If you are interested in Sales order cancellations, then these exceptions would be categorized by SAP as belonging to the  "exceptions during Scheduling" or "exceptions during availability" groups.  On the Exceptions group tab, select these two items (6&7), deselect the rest. Enter.
    You are now presented with a list of all materials that contain one or more of these exceptions.  From the menu bar at the top, select Edit>Find.  If you get a 'statistics' popup, click through.  Select the 'Find Exceptions' tab.
    Message 26 "excess stock in individual segment" means that in a MTO environment, you have more supply than demand against given order/items (as you would have if a cust. cancelled his MTO order).  Select this message.
    Message 20 "Cancel Process" means that you have a supply element that has NO requirements (as you would have if a cust. cancelled his MTS order).  Select this messaege.
    Message 15 " Postpone process" means that you have supply elements that are scheduled to be received earlier that necessary (as you might have if a Cust cancelled his MTS order). Optionally select this message.
    Clik the green check.  You will now notice that certain rows on the listing are highlighted.  These are the ones that contain your problem children.  Hit the "glasses selected MRP list" button.
    This takes you to the first MD05 of the highlighted items.  Review the problem.  Decide what to do:  Cancel a supply element?  Push out a supply element? Leave it alone?  Call customer service to discuss which order was cancelled and why?  etc etc etc...
    Once you are done with the first material, clik on the 'next material' icon or hit Ctrl-F2.  Repeat.  Continue till all materials have been evaluated and resolved.
    This works for any other MRP message as well.
    Regards,
    DB49

  • RUN_LOGIC:Accounts are not available in the rule table

    Dear BPC gurus,
    I experience the following error while trying to run a Business Rule (Account transformation). Setting are to change the flow dimension of an account and apply to YTD.
    Script logic that is used is:
    *RUN_PROGRAM CALC_ACCOUNT
    CAT = %CAT_SET%
    TID_RA = %AAL_TIME_SET%
    *ENDRUN_PROGRAM
    The following error occurs:
    RUN_LOGIC:Accounts are not available in the rule table
    Failed
    Application: FORECAST Package status: ERROR
    All input is welcom.
    Thanks and regards,
    Vincent

    Hi James,
    Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
    Any other suggestions?
    Regards,
    Vincent

  • Business Rule error: Accounts are not available in the rule table

    Hi everybody,
    I have a problem running the Business Rule for the profit/loss copy to the equity account.
    The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
    Then I created the related script logic (ID=CALCACCOUNT):
    *RUN_PROGRAM CALC_ACCOUNT
    CATEGORY_M = %CATEGORY_M_SET%
    CURRENCYLABEL = %CURRENCYLABEL_SET%
    TID_RA = %TIME_SET%
    CALC=PROFIT
    *ENDRUN_PROGRAM
    Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
    PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
    But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
    I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
    Thanks
    Filippo

    Hi James,
    Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
    Any other suggestions?
    Regards,
    Vincent

  • Table /SAPAPO/CTMML not available in new SCM 7.0 EHP1

    Hi Gurus,
    First let me provide you background of the issue which we are
    facing.
    We have two SCM systems D06 and D21.
    D06 SCM release is SCM 5.0 and D21 SCM release is
    SCM 7.0 EHP1 which we have recently installed.
    The issue which we are facing is that there is one table /SAPAPO/CTMML
    which is available in D06(SCM 5.0) system but it is not available in
    new D21(SCM 7.0 EHP1) system.
    Please clarify us on the below point.
    Whether this table is available in the new SCM
    7.0 EHP1 environment and if no then is there
    any another table which has replaced this new table in the new SCM 7.0
    EHP1 environment.
    We have made Search for Objects in Requests/Tasks
    in Tcode Se03 and provided the value /SAPAPO/CTMML in R3TR TABL
    table/structure column and got the below result.
    This table we are using to store the CTM Profile id and Product and
    Locations. We use this table to read the Product and Location for a
    customized program that generates the spool.
    So we like to know how to generate this table else we would like to
    know the alternative table for this.
    Can you please suggest us some table which we can use as an alternate
    to table /SAPAPO/CTMML.

    Hi Gurus,
    First let me provide you background of the issue which we are
    facing.
    We have two SCM systems D06 and D21.
    D06 SCM release is SCM 5.0 and D21 SCM release is
    SCM 7.0 EHP1 which we have recently installed.
    The issue which we are facing is that there is one table /SAPAPO/CTMML
    which is available in D06(SCM 5.0) system but it is not available in
    new D21(SCM 7.0 EHP1) system.
    Please clarify us on the below point.
    Whether this table is available in the new SCM
    7.0 EHP1 environment and if no then is there
    any another table which has replaced this new table in the new SCM 7.0
    EHP1 environment.
    We have made Search for Objects in Requests/Tasks
    in Tcode Se03 and provided the value /SAPAPO/CTMML in R3TR TABL
    table/structure column and got the below result.
    This table we are using to store the CTM Profile id and Product and
    Locations. We use this table to read the Product and Location for a
    customized program that generates the spool.
    So we like to know how to generate this table else we would like to
    know the alternative table for this.
    Can you please suggest us some table which we can use as an alternate
    to table /SAPAPO/CTMML.

  • Menu option not available in SAP GUI transaction in Portal

    Hi all,
    When accessing SAP Transaction iview via the portal 7.31 the drop down menu option is not available in the first session.
    It is available in the second session and when accessing SAP Traansaction directly from the SAPLOGON pad, the option allows users to open other sessions and stop transactions.
    How can we enable the menu option in Transaction iview in Portal? 
    Plz find the attaches screen shot of error.

    Hi Chandra,
    Can you try the same senario with broswer compatible mode?
    Because these function will be over ride the style sheet.
    Thanks
    Patrick

  • SAP 4.7 help is not available

    I installed SAP 4.7 but the help is not available on F1
    is there any body to help me out

    Hi Jaffer,
    You have to configure SAP Help using transaction SR13 . Please go through the link which will help you to configure SAP help
    Re: SAP Help Configuration
    thanks
    Prince Jose

  • OSS note 1135038 not available on SAP service marketplace

    Hi,
    I am unable to get OSS note 1135038 from SAP service marketplace. When I try to open it I get the message 'The requested SAP Note is either in reworking or is released internally only'.
    Can somebody help?
    Regards
    Rajaram

    Did you get this note number today by searching in SAP support portal?
    It is either abandoned, or applies to one customer (only the customer is able to see it), or SAP is maintaining it and you should wait. Open a message if you have an express need, or if this note is in rework status since many days.

  • SAP UR Design/Themes perspective not available.

    Hi,
    I can't see <b>SAP UR Design/Themes</b> perspective in my NWDS. I am having NWDS 7.0.11. Is it not available in this version?
    Thanks and Regards,
    Deepti

    Hi,
    you have to install it separately.
    Download here:
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/151c9556-0e01-0010-dabc-8cb4191bd49b [original link is broken]
    Kind Regards
    Stefanie

  • Multi-table mapping is not inserting into the primary table first.

    I have an inheritance mapping where the children are mapped to the parent table oids with the "Multi-Table Info" tab.
    One of children is not inserting properly. Its insert is attempting to insert into one of the tables from the "Additional Tables" of "Multi-Table Info" instead of the primary table that it is mapped to.
    The other children insert correctly. This child is not much different from those.
    I looked through the forums, but found nothing similiar.

    I would expect the Children to be inserted into both the primary table and the Additional Table? Is the object in question inserted into the primary table at all? Is the problem that it is being inserted into the Additional Table first? If it is, are the primary key names different? Is it a foreign key relationship?
    If the object in question has no fields in the additional table is it mapped to the additional table? (it should not be)
    Perhaps providing the deployment XML will help determine the problem,
    --Gordon                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Withholding tax @ time of Invoice not available in DMEE struture table

    Hello DMEE Experts:
    facing some issue in DMEE
    I need to capture withholding tax amount @ time of Invoice in DMEE output as far as my knowldge invoice level details doesn’t get copied to DMEE structure table (FPAYHX, FPAYH and FPAYP).
    Expected DMEE output:
    Indicator
    Payment document
    BLNR
    Gross BLNR amount
    Withholding tax amount
    Net amount
    D
    200000006
    0010078629
    I
    200000006
    1600000029
    1000
    8.93
          991.07
    I
    200000006
    1600000030
    1500
    13.39
          1486.61
    I
    200000006
    4600006397
    650777
    650777
    I
    200000006
    4600006398
    650777
    650777
    I
    200000006
    4600006407
    650777
    650777
    T
    1600000029
    39
    0
    0
    893
    T
    1600000030
    39
    0
    0
    1339
    as per above expected output every invoice applicable for withholding tax @ time of invoice same is get repeated in tax line item (T) i.e next level
    I am new to DMEE can anybody help me how to meet this requirement specially how i can arrange level so that all respective invoice get repeated which fall under single payment document.
    Some more input
    D line items for Vendor Payment line items details
    I Invoice level details like BLNRS
    T Line stand for tax line item on respective invoice
    Thanks
    Pankaj

    Hello Exper,
    can anybody help on this, i need to deliver this DMEE tree ASAP
    Thanks
    Pankaj

  • Fields in Field Catalog not available when creating condition table

    I  see that field HIEBO01 to HIEBO12 are available in Field Catalog, but I don't see these fields when creating condition table
    Please let me know what I am missing here.
    Any insight on this would be really helpful.  Thanks guys!

    you need to get them added to the pricing structure KOMKAZ or KOMPAZ based on whether you need @ header level or @ item level respectively.
    and then add the logic in the sales order user exit for these added field in the pricing_prepare_TKOMK or pricing_prepare_TKOMP...again based on header level or item level.....
    Then go back to the field catalog and select from the respective structure and add them, Then you can see them when creating cond tables.
    Hope this helps. Hope i havent misunderstood your query.,
    Regards
    Sai

  • Folders not available in SAP Business workplace(SBWP)

    Hi,
    When i click on any of the folder in SAP Business workplace,the folders are getting disappeared and i am getting the message "Folder inbox no longer available".
    Please let me know if any one you have faced the same problem.
    Regards,
    Kumar

    Hi,
    I have already refferd this Note,but this doesn't solved my problem.
    Please let me know if there is any  workaround for this issue.

  • SAP PI FTP sender adapter not working with SAP ECC over Itanium

    Hi,
    We have been running normally SAP PI 7.0 SP14 with no issue for a while.
    We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
    We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
    Does anyone have any idea?
    Thanks a lot for your help
    Diana

    Hi,
    I am using FTP connection and for the receiver it is working fine.
    Thanks
    Diana

  • Extranet Management menu is not available in SAP JAm enterprise edition

    We have enterprise edition, but I do not see the Extranet Management Munu in the Admin Section

    In case Ankur Godre 's suggestion does not pan out then please contact SAP Jam support, via the Successfactors support site.
    https://support.successfactors.com
    Thank you.

Maybe you are looking for

  • Can i create a website in iweb and convert it to wordpress?

    Can I create a web site in iweb and then convert it to wordpress?

  • How place an LD_PRELOAD bash command into a .desktop file (LXDE)

    To enable video in Skype with my webcam I must launch skype the following way: LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype To get that command done from my LXDE menu I tried to edit the skype.desktop file and place that line after the "Exec" deskt

  • AutoComplete Text in Report Paramter

    Hi , I need an option like showing parameters as Auto Complete text -"Same like Ajax Tool-Auto complete Textbox". Is there any option,when user types the -Employee Name,like "A",then the report paramter lists all -Employees having -"A" as Starting..

  • ESS/MSS for International Country grouping

    Hi all, Scenario: We are implementing Portal ESS/MSS on ECC6 and have loaded the Best Practices with the below components. SAP NetWeaver Portal 7.0 SP12 with the following additional software components      BP ERP05 Common Parts 1.0 SP08 (BP_ERP5COM

  • BJ Printer Utility needs Classic stopped

    I have a Canon i450 printer connected to my iBook G4 via USB. When I use the BJ Printer Utility to perform maintenance tasks like checking/resetting the ink level, cleaning heads, or changing printer settings, it usually doesn't work when Classic is