"Flash9b.ocx failed to register" error message and problems caused

I didn't want to update my flash player but finally was "bullied' into doing so, because i kept receiving a screen message telling me to update it, without being given the option to say "No. Thank you anyway." After I updated my flash player to 11....something (I didn't memorize all the numbers), even though the installation completed, I now have this ERROR MESSAGE whenever I try to access the internet on my computer:
Solution Center
Module
C:\WINDOWS\system32\Macromed\Flash\Flash9b.ocx failed to register.
I don't think I really needed my Flash player updated at all in the first place. I don't use computer games and don't have an "x-box", I don't have a camera on, or with my computer. I just didn't want to keep seeing that irritating demand to "Update".
Is there a way for me to remove the update and re-install the flash player I already had?
In the past, when I used my HP Officejet installation software from the original cd, to reinstall my printer-Solution Center software, it solved the problem I had when updating other Adobe software. Unfortunately, the software from this cd, did not solve the problem this time.

Download the uninstaller for Flash Player
The Flash Player uninstaller executes on both 64-bit and 32-bit version of the Windows operating systems.
uninstaller (797 KB)
You can download older versions here:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Note: It's not only the Flash player updater that will prompt you to update - Many pages that have Flash content will REQUIRE the latest version and WON'T WORK with anything older.

Similar Messages

HP Solution Center error "flash9b.ocx failed to register"

I have a similar Flash9b.ocx faied to register problem that I have been trying to solve for several weeks.It started after I upgraded to the latest Flash Player 10.3.183.7 via the official Adobe website. After this upgrade on start up I got the following HP Solution Centre (printer software) error message:
C:\Windows:\system32\Macromed\Flash\Flash9b.ocx failed to register. HRESULT-2147220473. Contact your support personnel.
Further investigation confirmed that Flash Player had stopped working and where the image should be there was a blank black box. I tried reinstalling the latest version of Flash Player again but it made no difference. I was prompted to insert the original Solution Centre disk to solve the problem and although I tried this, it had no effect. I uninstalled Solution Centre including manually deleting any HP files that had been left behind and did a complete reinstall of the latest version including relevant patches from the HP website. This appears to have solved the problem as far as the Solution Centre error messages are concerned. However, on further investigation I found the Flash9b.ocx file mentioned above no longer exists but Flash Player still isn’t working.
I am running Vista (32bit) with all the current upgrades and Internet Explorer version 9.0.8112.16421 update version 9.0.2 (KB2559049)
Thanks for your help

After more than two weeks of trying, I finally found a solution to my HP Solution Centre Flash Player 10 conflict. Below is what worked for me and if you have a similar problem I hope this posting is of some use. uninstall Solution Centre & reinstall the latest version plus all the relevant patches from the HP website. Reset browser settings which in my case was IE 9 (Internet Options, Advanced tab, Reset) followed by a restart. Then uninstall Flash Player (Control Panel, Programs & Features, Uninstall) followed by another restart. Finally go to Adobe website and download the latest version of Flash Player.
Hope this helps

..\..\Src\AudioRender\AudioPrefetch.cpp-99 error message and what caused it.

I found that when I zoomed into the sequence a lot using the +- keys, that the error message "..\..\Src\AudioRender\AudioPrefetch.cpp-99" kept jumping out at me. It was the last 3 steps of zooming in or out that brought the error message up on screen - a lot of times. It was only happening in one sequence in a particular project. I tried the suggestions for similar error messages that I found on this forum, but I eventually realised that in this project I had a WMV file (PowerPoint exported as a WMV file) which also had *audio* with it. (All the other sequences have WMV files but without audio.)
Going to the troublesome sequence and deleting the sound track from the WMV file fixed the problem. Next, I deleted the WMV file and put it back again. No error message. I then dropped the audio level to zero using the yellow line and the problem came back.
There is one other thing, the PowerPoint WMV file is 30fps and I’m in PAL land, so I interpreted the frame rate to 25fps. (So that PowerPoint transitions and movements etc. are smoother). I re-imported the original 30fps WMV file and put that in the sequence as 30 fps. Lowered the audio level to zero, and zoomed into the sequence. No error messages.
So it looks like a combination of WMV file, interpreting the footage and lowering the audio level to zero that caused this problem.
Do I need to post this somewhere so that Adobe gets to see this bug? (OK it is a rather unlikely combination of events.)

It's not as unlikely as you think. I just ran into the same exact thing. But I don't think it's the WMV.
I'm using footage from a Canon 5D Mark III shot at 60fps, then interpreted to 23.976 and dropped in a 23.976 timeline. I've also adjusted the volume on some of these clips, but not down to -∞. Since the error is "...AudioRender/AudioPrefetch.cpp-99" it makes sense that this is an audio related issue. I have also noticed that in the timeline, my yellow levels line and waveforms disappear when this error comes up.
So far I've been able to get around this bug by copying the clips into a new timeline, but this eventually comes back again.
The one question I have, is are you editing from an external hard drive? I've been editing at work off an external, then backing it up and working off internal drives when I get home. My external drive has been disconnecting itself lately, but it's never been around or at the same time as this error. Thought I'd still check with others though.

Error message and problem with code

Hi all,
I have a code that i need to print the total
ie: retail multiplied by the quantity entered
this is what I have written
but when compiling error message is (not a statement )
any tips appreciated
or is this part of the code completely wrong???
Remembering that I have 4 arrays in the code
paul
System.out.println((input_part +"\t"+ "\t" + qty[input_part-1]+"\t"+ "\t"retail[input_part-1]+"\t"+ "\t" + "\n");
or is this more appropriate??
total=(quantity*cost);
System.out.println("Total Retail is:" + total);
But with this i get error
Operator * cannot be applied to int, double[]
total=(quantity*cost);

System.out.println((input_part +"\t"+ "\t" + qty[input_part-1]+"\t"+
"\t"retail[input_part-1]+"\t"+ "\t" + "\n");Look at what comes before "retail" in your code sample, and after the "\t" that immediately preceeds it. Should there really be nothing between those two values?
But with this i get error
Operator * cannot be applied to int, double[]
total=(quantity*cost);It's telling you that you can't apply the operator * (multiplication) to an integer and an array.
Did you really think that you'd be able to multiply a number by an array?
Perhaps you meant to do something like
total = quantity * cost[lastElt];

I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. H

I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. Have Disabled UAC and Startup items and Services with no success. Please help - frustrated to no end. Can someone help me?

make sure you're using the adobe cleaner, not crap cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
copy the installation files to a desktop folder and install from there.

Problem with uploading files to SharePoint 2013 in cloud using web services. Keep getting error message and don't know why.

Hello everyone. I am having trouble writing a utility that uses SharePoint web services to upload a file and metatag it. It keeps throwing the following error message:
"The request failed with the error message: -- <html><head><title>Object moved</title></head><body> <h2>Object moved to <a href="/_forms/default.aspx?ReturnUrl=%2fsites%2fgk%2f_vti_bin%2fcopy.asmx">here</a>.</h2>
</body></html> --."
Not sure why. I pass the file that I am going to upload to the subroutine and it is suppose to upload it to the appropriate library. I have burned several days on this problem and I am not sure what is going on. I would appreciate anyone that can point me in
the right direction. Below is the subroutine that I have that is causing the problem. Obviously, I have stripped the name from the example.
Thanks
Mike
******** <Begin snip of code> **********************
Public Shared Sub CreateNewDocumentWithCopyService(ByVal fileName As String)
Dim c As New copyservice.Copy
c.PreAuthenticate = True
c.Credentials = New System.Net.NetworkCredential("[email protected]", "mypassword")
c.Url = "https://x.sharepoint.com/sites/gk/_vti_bin/copy.asmx"
Dim myBinary As Byte() = System.IO.File.ReadAllBytes(fileName)
Dim destination As String = "https://x.sharepoint.com/sites/gk/Gatekeeper%20Reference/" & System.IO.Path.GetFileName(fileName)
Dim destinationUrl As String() = {destination}
Dim info1 As New copyservice.FieldInformation
info1.DisplayName = "Title"
info1.InternalName = "Title"
info1.Type = copyservice.FieldType.Text
info1.Value = "new title"
Dim info2 As New copyservice.FieldInformation
info2.DisplayName = "Modified By"
info2.InternalName = "Editor"
info2.Type = copyservice.FieldType.User
info2.Value = "-1;#servername\\testmoss"
Dim info As copyservice.FieldInformation() = {info1, info2}
Dim resultTest As New copyservice.CopyResult
Dim result As copyservice.CopyResult() = {resultTest}
Try
' When creating new content use the same URL in the SourceURI as in the Destination URL argument
c.CopyIntoItems(destination, destinationUrl, info, myBinary, result)
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
******** <End snip of code> **********************

Hi,
If you want to upload a file to a library in SharePoint 2013 online, I suggest you use Client Object Model or REST API.
The code snippets in the two threads below will be helpful:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/deac7cb7-c677-47b0-acdc-c56b32dfaac8/uploading-bigger-files-using-csom
http://stackoverflow.com/questions/17057074/how-to-download-upload-files-from-to-sharepoint-2013-using-csom
Uploading Files Using the REST API
http://blogs.msdn.com/b/uksharepoint/archive/2013/04/20/uploading-files-using-the-rest-api-and-client-side-techniques.aspx
You can handle the authentication with
SharePointOnlineCredentials object:
http://www.vrdmn.com/2013/01/authenticating-net-client-object-model.html
Best regards
Patrick Liang
TechNet Community Support

Export release build failed with an error message: complilation failed while excuting : compile-abc

I updated air sdk from 4.0 to 16.0 beta to fix apple app store submitting bug. I can build the project and run it on simulator without any problem. But when I tried to export the ios release build, I got this error message: complilation failed while excuting : compile-abc.
I use commmand line to excute compile-abc.exe with the parameters that adt gives it, but it failed without any error message.
Here is the command line:
compile-abc.exe -mtriple=armv7-apple-ios -filetype=obj -sdk "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/avmglue.abc" -fields "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/air-fields.arm-air.txt" -O3 -abc-file-list=E:\MyApp\bin-debug\AOTBuildOutput8184169967790207636.tmp\ABCFilesList.txt
There's a empty file AOTBuildOutput-0000001821_1821.o left in the command line workaroud path. I opened file AOTBuildOutput-0000001821.abc, but didn't get any clue. How can I trace this problem?

Still having similar issues - seems to be when I embed an image - but works for every release except for release build
Tried your work around but doesnt seem to make a different
[Embed(source = "/../assets/[email protected]")]
protected static const ATLAS_IMAGE:Class;
[Embed(source = "/../assets/[email protected]", mimeType = "application/octet-stream")]
protected static const ATLAS_XML:Class;
[Embed(source = "/../assets/iconMap.png")]
protected static const ATLAS_IMAGE_LOW_RES:Class;
[Embed(source = "/../assets/iconMap.xml", mimeType = "application/octet-stream")]
protected static const ATLAS_XML_LOW_RES:Class;
if(Starling.current.viewPort.width > 320)
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE(), false), XML(new ATLAS_XML()));
}else{
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE_LOW_RES(), false), XML(new ATLAS_XML_LOW_RES()));

I tried to download a book I bought but failed. The error message contains "The operation couldn't be completed. (Product Integrity error 9918). Anyone can help?

I tried to download a book I bought but failed. The error message contains "The operation couldn't be completed. (Product Integrity error 9918)". Anyone can help?

If this is something you attempted to purchase and download through the iTunes store, then contact iTunes support. http://www.apple.com/emea/support/itunes/contact.html

Trying to install adobe photoshop on macbook pro but at 50% it gives error message and kicks out dis

trying to install adobe photoshop on macbook pro but at 50% it gives error message and kicks out disc

copy the disc contents to a desktop folder and click setup in that desktop folder.
if that fails what ps version are you trying to install and what is your os version?

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection.

HT4759 when i sign in to find my iphone, i get a error message and it closes, any ideas?

when i log into find my iphone on my pc, i get a error message and it will just close. can anybody help?

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe

Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)

Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)
the s10 works perfectly on my ipod touch 4g.

this is
ERROR HAS OCCURRED Bluetooth audio.
It failed to establish connection with their
audio device. make sure it is on and
in the range. you may need to restart the
audio section of the program you were using
STOP USING THE HEADSET WITH MICROPHONE.
ALSO HAVE A MOTOROLA BLUETOOTH SPEAKERS WHICH EQ5 work seamlessly with the Mac

QL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of

Dear all,
please help me4 on this
i am getting this error
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
my logs are:
sapinst.log
ERROR 2011-12-18 09:40:34.550
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2011-12-18 09:40:34.558
MUT-03025 Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
ERROR 2011-12-18 09:40:34.717
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
INFO 2011-12-18 09:57:09.852
An error occured and the user decided to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase".
INFO 2011-12-18 09:57:15.747
Creating file /tmp/sapinst_instdir/.lastInstallationLocation.
INFO 2011-12-18 09:57:16.545
Creating file /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/__instana_tmp.xml.
oracle_sql_results.log
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Dec 18 09:40:34 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
SAPINST: End of output of SQL executing program /oracle/PRD/102_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-12-18, 09:40:34 SAPINST ORACLE stop logging
alert_prd.log
Sun Dec 18 09:40:34 2011
Starting ORACLE instance (normal)
Sun Dec 18 09:40:34 2011
WARNING: EINVAL creating segment of size 0x000000d8001b2000
fix shm parameters in /etc/system or equivalent
please sujest the solution very urjent pz........

Dear deepak
itried to start the database manually
but it is not working.
SQL> startup
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
SQL>
and my shm parametrs for the Solaris ACCORDING TO NOTE 724713 are
projadd -p 333 -c "SAP System PRD" \
-U prdadm,oraprd \
-K "process.max-file-descriptor=(basic,65536,deny)" \
-K "process.max-sem-nsems=(priv,2048,deny)" \
-K "project.max-sem-ids=(priv,1024,deny)" \
-K "project.max-shm-ids=(priv,256,deny)" \
-K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
dr
projmod -s \
-K "process.max-file-descriptor=(basic,65536,deny)" \
-K "process.max-sem-nsems=(priv,2048,deny)" \
-K "project.max-sem-ids=(priv,1024,deny)" \
-K "project.max-shm-ids=(priv,256,deny)" \
-K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
user.root
prdadm::::project=dr;oraprd::::project=dr
thanks & Regards
k.Phani Krishna

I using iWeb 3.03. I'm not able to complete a publish command. I get an error message and a note to try again later. What can I do to find the source of the problem

I am using iWeb 3.03. I have prepared a new website and several pages. Attempts to publish have failed. An error message appears, which I don't understand. The message includes a note that says "try again later." What might I try next to get past this problem?
Duane Fitzgerald

Try the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete the contents.
reboot.
go to the System/MobileMe preference pane and log out of MMe.
login with a bogus username and password like "test" and "test". This clears the caches.
login with your correct username and password.
launch iWeb and try again.
OT

"Flash9b.ocx failed to register" error message and problems caused

Similar Messages

Maybe you are looking for