For Digicel operator from French Guiana. Not configuration for voice messaging

Hello
I have an Iphone 4 S unlocked all operators.
I have a new package of telephone in the operator Digicel of French Guiana.
My problem is that there is no pré-configuration for voicemail for this operator.
even in the after-sales service of this operator.
They n ' were not the solution.
Except for the Iphone 3GS.
Can Apple and Mac 0S5 system experts, you find a solution so that all Guyana Iphone users can have the functionality of voice mail on the Digicel network?
Know that your solution will be valid for Martinique and guadeloupe.

It is CSV (= comma separated variable) data.  My intention was that people could import it into Excel or OpenOffice Calc and edit it as a record of how they had configured their phones. Nokia only allow uploading jpg, gif, png, pdf, log, doc and docx files here, not spreadsheet files.
It cannot be used to configure a phone directly; that must be done manually.
Having such a record eases the task of configuring a new phone or the same phone after a firmware upgrade or reload, especially if the changes are highlighted, for example by bolding.
To make it easier I've uploaded an OpenOffice Calc file at http://www.mediafire.com/?094z4ilz0hemm3y and a Excel file at http://www.mediafire.com/?ig191r6xbz68rx7.  They are for a 3110c with 7.30 firmware but other S40 3e phones have similar configuration.
Nokia 5130c-2

Similar Messages

  • HT1937 i have a white iphone 4 that says it was approved but restoring from itunes does not show (congrats unlocked message)

    i have a white iphone 4 that says it was approved but restoring from itunes does not show (congrats unlocked message)
    hel

    MaDCrackeR wrote:
    Email from AT&T says the IMEI number was approved for unlocking
    ..........4S that worked fine and it shows the message "congrats unlocked" in itunes
    When restored. But the 4 does not. AT&T insists its unlocked but they are only going off
    Of the request and IMEI number. Is there a way from the phone i can verify it was unlocked?
    If AT&T e-mail says it is unlocked, then believe it is so. Insert non-AT&T SIM inside and after backing up restore in iTunes again. Unlock gets attached.
    You can check the status of the unlock request on AT&T web-site.

  • I don't receive notifications for voice message on my iphone5 any help?

    I don't receive notifications for voice message on my iphone5 any help?

    have you checked what is set up in settings, notifications, phone?

  • How to stop //ANDROID:${from} has sent you a Sprint Voice Message. Call ${callbackno} to listen.?

    I keep getting this text message on my ipone4s every hour.
    //ANDROID:${from} has sent you a Sprint Voice Message. Call ${callbackno} to listen. CFGs1840.0=0fb15457cd82d2573628IAkhiRv//CM
    Does anyone know how to stop this. Sprint has no idea and it's really annoying.

    They have an auto-SMS sending program running that has your phone number in the list. Talk to your carrier about it. - ÇÇÇ

  • My Nokia 625 on T Mobile does not show when voice messages have been left,

    A brief banner message and sound is made immediately following the message but if this is missed there is no indication of a stored voice mail. Is it possible to have an on screen alert that remains until the voicemail is checked? 

    Hi 
    Welcome to the EE Community!
    On the phone tile you should get a little voicemail indicator show that looks like this....
    If you turn your device off an back on and get someone to leave a voicemail to see if the indicator appears.
    If not it maybe that you need the voicemail setting refreshed from the network side of things.
    Let me know how you get on. 
    Thanks. 

  • Lookup properties not configured correctly

    Hi,
    I have configured lookup query ,in which I am taking value from the RO form data like below.
    UD_IDMSP.UD_IDMSP_IDMS_VERSION = '$Form data.UD_IDMSRF_IDMS_VERSION$'
    Although the resuls are coming as expected I am getting "Lookup properties not configured correctly" this message in lookup popup window.
    Please provide some guidelines.
    Thanks,
    Pallavi

    Lookup Query :
    select distinct UD_IDMSP_IDMS_User_ID from UD_IDMSP where orc_key in (select orc_key from oiu where ost_key in (select ost_key from ost where ost_status in ('Provisioned', 'Enabled') and obj_key = (select obj_key from obj where obj_name = (select lkv_decoded from lkv where lku_key = (select lku_key from lku where LKU_TYPE_STRING_KEY = 'RETS.RODisplayName.Lookup') and lkv_encoded = 'IDMS'))) and UD_IDMSP.UD_IDMSP_IDMS_VERSION = '$Form data.UD_IDMSRF_IDMS_VERSION$')
    Lookup Column Name : UD_IDMSP_IDMS_User_ID
    Column Captions : User ID
    Column Names : UD_IDMSP_IDMS_User_ID
    Column width : 100
    This is all

  • Emails alerts for skype voice messages = haywire

    within the last week, i can't count on emails alerts for skype voice messages.  the email notifications during the past week have been false or out of date.  its confusing because these skype email alerts tell me i just got a voice message (sometimes in the middle of the night) when there has been none.  btw the emails are clearly not spam, they are emails from skype (i've checked the raw header) there is no trojan attached, the links work to skype's website.  this is a problem on skype's end.  i temporarily unsubscribed from email alerts about voice messages just to save myself from the confusion.  skype, please fix this, i miss my email notifications working as they should!

    so, even though i changed my settings to NOT send me email alerts for voice messages, i'm still receiving the same false email alerts.  so, your email alert system is broken skype.  there is no rhyme or reason to the order of them too, i get an alert about a message from 4 days ago and then one from 5 days ago and then one from 3 days ago all at random times compared to when the message was actually left.

  • Measurement Computing USB-SSR24 error 42 Digital Port not configured correctly for requested operation

    Using LV 2012 and ULx 2.02 LV driver:
    LV is throwing an error 42 (Digital Port not configured correctly for requested operation) from the ULx write VI but only on PortCH.  All my configurations are correct on the hardware and Instacal tests the ports OK.  I've reinstalled everything and still see the same issue.
    Since PortA is configured identical to PortCH, and PortA is functioning fine, I'm stumped.  This is occuring on two different SSR24 DAQs so I don't think it's the hardware, plus I've already mentioned that the Instacal isn't having a problem with it.
    I've attached my VI I'm using for debug. 
    Jeff
    Attachments:
    test of Wilmington.vi ‏19 KB

    I worked with Measurement Computing and they agreed that there is a bug with certain DI/DO configurations.  There are a possible 16 different DI/DO configurations with the hardware and apparently mine (PortA - DO, PortB- DI, PortCL-DI, and PortCH-DO will throw this error for PortCH.  I'm currently using .net calls to work around the issue until the ULx driver is updated.  I'll post that when I see it.  Attached are the .net VI's that I'm using for simple static IO.
    Attachments:
    USB SSR DOT NET Write Bit.vi ‏20 KB
    USB SSR DOT NET Read Bit.vi ‏21 KB

  • I bought the external DVD player/burner for my Macbook.  I tried using it with my Dell laptop but it will not work.  Is it not configured to work with anything but apple operating systems?

    I bought the external DVD player/burner for my Macbook.  I tried using it with my Dell laptop but it will not work.  Is it not configured to work with anything but apple operating systems?

    If you purchased the Apple USB SuperDrive, it will only work with select Apple devices. It won't work, for example, on my Late 2011 model that has a SuperDrive built-in, but it will work with an Air, Retina model, new 'drive-less' iMacs, etc.
    As far as I know, though, you can only hack the drive to work with some other Apple devices, but not with Windows PCs. Which is a shame as other, less expensive DVD/CD devices will work with just about any machine.
    Sorry,
    Clinton

  • So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message.  It will not allow me to quit the program.  Also, once that happens how do I remove the program from the computer?

    So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message.  It will not allow me to quit the program.  Also, once that happens how do I remove the program from the computer?

    What Airplane Mode program? To stop a running program launch Activity Monitor (in utilities folder) and quit the program from there. To remove the program drag it to the trash or better use the uninstaller that should have come with it.

  • "Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"

    We are running into a problem which we have noticed on UCCE 8.5 and havent seen on earlier 7.5 release.
    If we setup a CTI port as agent device target and if we try to login the agent using Cisco Desktop (Not CAD, just CTI OS Client) then we get following error:
    "Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"
    But this wasnt the issue with 7.5 and we were able to do agent login with CTI Port as device target. We dont intend to use Mobile Agent feature but just login UCCE agent to CTI port as the device.
    Do we know if this is a known issue or if something has changed between 7.x and 8.x release which could be is causing this?

    So you can ping and nslookup from your ms to these agents and vice versa right?  I wouldn't do a manual install, I would push the agent from the management server.  You can uninstall the agent manually, or use cleanmom to get rid of them.  Then
    do an install from the console.  When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
    From Holmans post on this:
    e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    The MOM Server could not execute WMI Query "(null)” on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    8004100A 
    800706BA
    1.  Ensure agent push account has local admin rights 
    2.  Firewall is blocking NetBIOS access.  If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed.  We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.  
    3.  Inspect WMI service, health, and rebuild repository if necessary 
    4.  Firewall is blocking ICMP  (Live OneCare) 
    5.  DNS incorrect 
    http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
    Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • Roland UM-ONE  CD-ROM does not mount on iMac OS 10.8.2 Roland driver for 10.8 installed as directed. No power ready light shows when connecting UM-ONE. System Profiler shows it, but not configured. Older UM-1X works fine. UM-ONE works on Dell Windows XP.

    UM-ONE
    Roland supplied CD-ROM does not mount or read by iMac OS 10.8.2, works with old TiBook and Dell laptop, however.
    Got latest driver from RolandUS.com (um_1mx8d_v100), installed as directed.
    No power ready light shows when connecting UM-ONE.
    System Profile shows it there, but not configured.
    With Audio MIDI Setup opened to MIDI Studio window, UM-ONE does not appear.
    Tried many things without success. Tried swapping UM-1X (formerly on Dell laptop) with UM-ONE. UM-ONE installed and worked there without any issues. MIDI instrument communicates fine.
    The UM-1X works without complaint and as expected when connected to any USB port on either the Dell or iMac, even a hub or keyboard port, just as it formerly had before changing operating systems, etc. It is old, but reliable.
    Upshot is, for now, that UM-1X works with either the Dell or the iMac, but is currently attached to the iMac. UM-ONE (2011 model) only works with the Dell (Windows XP).

    Same problem here! The only difference is that I'm using a MacBook pro 13 inch (2011)

  • Doesn't play songs, "itunes is not configured for use with mac-formatted"??

    Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
    The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
    Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
    Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
    Thanks for any thoughts!

    Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
    I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
    If there is anyone out there that can help please do!
      Windows XP  

  • Mail sender adapter POP server not configured for URL access

    Hi Experts,
    I have a Mail --> PI --> R/3 scenario and I am configuring the Mail sender adapter for POP3. The issue is that the POP server is not configured to be accessed via a URL and hence the URL pop://hostname/ is causing the following error at runtime:
    _1. When I use pop://Fully qualified host name/
    _Error: exception caught during processing mail message; java.net.UnknownHostException
    _2. When I use pop://IP address of host/
    _Error: exception caught during processing mail message; java.net.SocketException: Connection timed out:could be due to invalid address
    I am able to ping the POP3 server from the PI server using both the FQDN and IP address.
    Can someone please help.
    Thanks,
    Shobhit
    Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM
    Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM

    Hi Shobhit
    Check with these notes:
    804102
    xi 3.0 mail adapter with pop3 user authentication problem
    810238
    XI 3.0 Mail Adapter for POP3 may not report some errors
    also check mailserver security settings ...
    Connection refused occures when XI cannot connect
    in most cases so try checking it again , maybe some ports are not opend on the firewall
    Thanks
    Edited by: Abhishek Agrahari on Jul 14, 2009 11:44 AM

  • Hi I am from Spain and I am new on Macworld, recently I have bought a Mac Book pro, the keyboard is not configured rightly when I have to write @ I have to press g instead of @ key , how can I solve this problem ?. Thanks in advance.

    Hi ,
    I am from Spain and I am new in MacWorld, recently I have bought  a MacBook Pro , but teh keyboard is not configured rightly, when I want to write @ I have to press g instead of the @ key, or the symbol for questions ?, I have to press :: key. Please how can I solve this problem ?. Thanks in advance.
    BR,
    XAvier

    xavier85 wrote:
    I am new in MacWorld
    Sorry to disappoint you, but this isn't MacWorld.
    when I want to write @ I have to press g instead of the @ key
    Are you sure you don't have to press ⌥-G (Option-G) to get @?
    Anyway, sounds like a keyboard/keyboard layout mismatch.
    Go to System Preferences > Language & Text > Input Sources. From "Select input methods to use" enable (check) the following
    Keyboard & Character Viewer
    U.S.
    Spanish
    Spanish - ISO
    Also enable "Show Input menu in menu bar".
    The Input menu should appear to the right of your menu bar, with the icon of a national flag. From this menu, choose "Show Keyboard Viewer". Then compare the layout displayed by Keyboard Viewer with the label on your MBP's keyboard. If it doesn't match, choose a different layout from the Input menu.
    My suspicion is that you're using a US keyboard with a Spanish keyboard layout, hence the difference you noted.

Maybe you are looking for

  • Backing up selected files onto an external hard drive

    Hi, I have partitioned an external hard drive in order to use it for both Time Machine as well as selected files.  Is there a way to move over all data/documents/libraries as a whole rather than document by document?  I thought that if you clicked on

  • Can't open RAW files

      I've had Photoshop CS3 for Windows for several years.  I recently bought a Sony DSC-RX100 and  just shot raw (ARW) for the first time and cannot figure out how to open the files in Photoshop. When I try to open a file in Photoshop CS3, the error me

  • ALERTS: Is it possible to create a new container Variable in Existing alert

    Hi PI Experts, I have a existing alert ZTEST defined in ALRTCATDEF. Now I want to create a new container variable PONUM to ZTEST in a UDF and populate it with a value coming in the payload. I have defined an alert rule for this alert and this alert w

  • T61 touchpad won't drag to mark or drag Windows

    Since a recent update to the Ultranav driver (15.1.19) I've got a problem with the touchpad: can't use the touchpad to mark text (shift/drag on touchpad), though I can do this with the trackpoint.  Never used the trackpoint much before but am glad I

  • Business System as Integration Server

    When do we use the business system as the integration server and when do we use it as a plain rcv SAP system?... Also how can we connect business system of dev quality and prod?