Force Quit Logs Me Off
When an application freezes or stops responding, i naturely open Force Quit. After I Quit the application that has frozen and then right when i click close on Force Quit i am automatically logged off and i have to log in again. Help?
Hardware:
Macbook Pro C2D
Saitek Eclipse II Keyboard
Razer Copperhead Mouse
It is not normal for any of those applications to "freeze" often!
I am assuming you are force-quitting only applications that report as not-responding?
There has to be a pattern. find the pattern, and we find the problem.
If you re-boot your mac and walk away (do nothing) does it freeze? If it does, then you have a hardware problem. If not, then there might be a hardware problem, but more likely a software problem. Software problems usually have specific triggers - something you type, some web page you load, or movie you view, that causes a fault.
Go into Applications/Utilities and run the CONSOLE application. Next time something strange happens, pop-over to it and see what it says. Console is a Unix feature, and 'everything' running on your computer dumps status and error messages to it.
Similar Messages
-
iPhoto will not let me close, force quit, or turn off the computer because it says it is "importing photos" when it isn't. How do I fix it?
Thank you- so simple, and it worked!
-
My Macbook Pro won't shut down/force quit/log off...
I've been having a problem turning my macbook pro off for about a week now. It won't shut down, force quit or log off. I've tried holding the power button down as well, with no luck. It won't even go to the sign in screen ....
I'm not sure what the problem could be because I haven't done anything different lately... no new software, websites, etc.. Nothing came up with my Avast full system scan either.
Help please! Thanks in advance.
-JessicaIntel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
-
My Safari browser is stuck on a webpage "survey.tubgalley.xyz...." and there is a pop up with "Congratulations, you are today's lucky winner, Click OK to continue". ( I have not of course clicked on it!).
I have tried quitting Safari, and shutting down my computer.
I have block pop ups enabled in preferences.
I have Mac OS X 10.7.5
2.5 GHz Intel Core i5
4 GB 1333 MHz DDR3Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, AdwareMedic, or Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
Leopard hangs - have to power off - force quit doesn't work
On several occasions Leopard has hung - try to run activity monitor to kill problem app - I get the bouncing icon but nothing else. force quit does not work on it. Can't log off - can put to sleep, but resumes in same hung state. Once I hard power off and restart, a I get a series of beeps, not just one and a normal start - no error messages. Other programs also would not respond to force quit including parallels desktop.
Hi,
Have had same problem here. My iMac is only a few days old, and barely anything on it before the upgrade from tiger to leopard.
Tried lauching thunderbird tonight, and the app just sat on the dock bouncing for a while, but the application never actually seemed to launch.
Tried force quit, but didn't have any effect. Also could not log-off, or shut down, as it said the application wasn't responding. This does seem very windoze-like! -
everything freezes i can't even force quit i have to shut off by holding the power button down please help me with this. thanks
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Installed Mavericks - restarted, but didn't finish iphoto update - force quit - restart gray screen stall, powers off - safe mode says disk full -recovery mode says mac and receovery HDs locked - verify disk says - recovery ok - repair says no live support?
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
How can I keep Firefox from saving my my last visited websites, even after I log out and Force Quit?
I quit and Force Quit Firefox when I log out of my MacBook Pro. Lately when I re-start Firefox, it has saved my last few visited websites and asks me if I'd like to restore these, or quit. How can I get Firefox to stop saving these sites and really quit?
hello, this is currently a problem in firefox when you first close all open firefox windows and then close the application afterwards - the bug should be addressed in a later version of firefox.
as a workaround in the meanwhile you could close firefox (through firefox > quit) while the browser window is still running or try this: enter about:config into the firefox location bar (confirm the info message in case it shows up) & search for the preference named '''browser.sessionstore.resume_from_crash'''. double-click it and change its value to '''false'''. -
I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.
Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!
-
this is driving me nuts..I don't know how to get it off...I can't use iphoto and I have to do a forced quit of the whole computer just to get it off the scrren. I don't even know what it means.
It means that when you imported this photo you didn't allow iPhoto to copy the image to its Library, but chose to store it somewhere else. Now iPhoto is looking for it. Where is the disk you chose to store it on?
Regards
TD -
I have a 5 month old iMac running Lion and W7 with the latest version of boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts, there's a small amount of drive activity and that's it.
Hi Jane, your info may still be there, look in the Users folder at root of the drive, how many users are there there?
It sounds like this may have happened...
Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
http://docs.info.apple.com/article.html?artnum=107854 -
I can't turn off my macbook pro,not even when I try to force quit.Mid 2009 17 inch all the software up to date.Problem started 3 days ago and mac is slow to load when restarted.Please help
Hi there nina777s,
You may want to try resetting the PRAM and SMC on your Mac as an initial troubleshooting step. Take a look at the articles below for more information.
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
-Griff W, -
Why must I force quit (double press home and slide off) Mail on both my iPad and iPhone in order to have Mail access on my iMac on the same wifi network. Fetch is set to manual and my ISP is Charter.
I don't know about the "3" but it's a POP account. I've always suspected that Charter isn't letting go using their mobile apps for iOS. Puzzling that it doesn't block the other way. That is if Mail is open on the iMac it doesn't block access to Mail on either the iPad or iPhone. I'm guessing it's their mobile apps that are the problem but they won't admit it to me.
-
Installer stopped at 95% and won't let me force quit, restart or turn off the computer
The flash player install manager stopped at 95% on my Mac and has been like that for a couple of days now. I can't end the installer, I can't even force quit. The installer doesn't allow me to restart or turn off the computer, because it's "still installing".
How can I solve this problem? Please help me!Hello,
Did you tried Flash Player 11.2, Flash Player Archived : http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Use Flash Player uinstaller (http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html) to clean any instance for Flash Player.
Thanks,
Vikram -
My dock would not appear. Checked preferences, they seemed to be locked. No change after a restart. Tried logging out of account, had to force quit several applications. Now all I have is the account desktop picture and a cusur that works okay. nothing else is on the desktop now. How do I restore?
All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.
Maybe you are looking for
-
BackUp plan/the finder can't copy files
I am trying to backup some files manually from one hd to another, and everytime i do this i get this error message : The finder cannot complete the operation because some data in "any file.psd" could not be read or written. (Error code -36) what i fo
-
Programmatically adding chart to a report throws exception
programmatically adding chart to a report throws exception "chart condition fields are not valid". Configuration: I am using CR4E to create web application, I've added RAS jars (rasapp.jar, rascore.jar, reporttemplate.jar, serialization.jar) to this
-
Error using Content Exchange - Package Upload
We've exported content from one portal system using Content Admin -> KM Content -> ICE -> Syndicator -> Global Offer. We then try to upload the ZIP file into another portal system using Content Management -> Content Exchange -> Package Upload. Whe
-
MagSafe 1 60W A1344 is not working, then I let it seat for a while and it works again then fails again, then works again?
-
Set Default User Agent in Safari
Hi, Can anyone tell me how to set Default User Agent to Mac in Safari for Windows. As when i start Safari every time now it gives me a default user agent while i want it to be Mac 3.1. Will appreciate help. Thanks in advance.