Forum Moderator Response Please
Greetings Forum Moderator,
Could you please explain why you remove my post/response to ovm 2.2 hard partitioning and licensing - getting my head around it! and why you did not remove the other response to ovm 2.2 hard partitioning and licensing - getting my head around it!
Please let me know why you remove all of my posts with links to my book and blogs, and why you allow other to post links to other content, i.e. from oracle, hp, other blogs, etc... but you always remove my posts with links to my book, blogs, etc....
Thank you for your support and great work with this forum!
Respectfully,
Roddy Rodstein
[email protected]
Roddy,
My frustration with people that paste incomplete responses
... and it's not just those few posts of yours but from a number of other people throughout all the many sub-forums...
is that people post a question and hope for guidance.
Responses are hopefully given so that the original poster and ANYONE ELSE that reads the thread in the future can get the assistance with what might be phrased as one-stop-shopping -- right there in the forum thread.
Your forum reply might prompt other people to recall an additional tidbit of help and they will add their reply to a thread and so on, and so on. In the end there is an almost complete solution to whatever issue prompted the initial post.
Think of these community forums as an imitation of a helpdesk from a support structure of a complex technical company. The sum total of all the thousands of posts and tens of thousands of replies create a knowledge base that complements the official knowledge base of the company.
I do look forward to you contributing to that knowledge base.
Similar Messages
-
Forum Moderator Please help find my message
Dear Forum Moderator:
Yesterday (09.20.08) I placed in the FLASH General Discussion
forum a message about problems in using Flash in my User's account.
I do not remember the exact title but there were words: user,
account, counterproductive.
The message was authored by my screeen name Fonarik
I DID see this morning this my message, but after I signed
off and then back again I can NOT find it.
Please help to find it, as I hope to get help on my problems.
Thank youFonarik wrote:
> Urami:
>
> You are not correct in: "I only see one post by you,
this very post
> and nothing else ever posted from this nick name".
> Please look at my message above and to the LEFT. You
will see that I posted
> TWO messages: the one that disappeared (or was
deliberately taken away as NOT
> PLEASANT to Adobe) and this my asking for finding it.
>
> By the way please clarify what you mean by applying to
other spots - I do not
> understand.
>
> Thanks for attention
Not going to try to prove my point, just look at the obvious:
This is the NEWS READER screen, loading messages directly
from the Adobe News Server.
View forum by user name, only two posts, the first one "Forum
Moderator..." and
the reply to my post just now:
http://flashfugitive.com/stuff/sc_01.gif
My news reader has copies of posts for past 3 years.
Then by browsing Web Based Forum, searching for all the
threads by your user name:
http://flashfugitive.com/stuff/sc_02.gif
Just one... in past 90 days...
Don't believe in "shoosh" conspiracy theories. Adobe (and
previously Macromedia) never
suppress any posts. In fact they encourage posts dealing with
all kind of issues because
it helps the tech guys to learn about problems they could
over look during very compressed
and short testing period.
You simply post it incorrectly and it never made to the
forum. Just post once again
because no matter where you believe in, there simply isn't
any other, beside this one, posts
from you on the forum.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
To Cert Forum Moderator : Please advice what I can resume my CertView.
Hi Moderator ,
I'm so disappointed. Since this Thu, my certview account had rejected my login and requrie authorization verification agian !!
Ridiculous !!! Last time, certivew took more than 3 months to authorize my account and post OCM result to my cert history .
To Certification Forum Moderator : Cert Update from CertView so slow
Thist time, I can't help to annoy. How long I must be held this time !!!
Please give me some advices.Certification Forum Moderator wrote:
Sean KTN,
I am glad your CertView issue is sorted out, could you please send a note to [email protected] anyway and let them know what happened, when it started and when it was resolved. Please give them as much info as possible, including your SSO info as well as your candidate ID. If there is a bug in CertView, we need to do a little research and get it sorted out. Please reference this thread in your email simply by stating that this is in reference to a thread on the OTN Forum that was refered to them earlier by Brandye Barrington and provide a link to the thread. This way, they will have some background info. It is often difficult to follow up on issues in the forum because we don't have all the candidate's info.
To the other candidate who was also having trouble with this issue. Please do the same.
Regarding the OPN Certified Specialist designation; unfortunately, this has been confusing from the beginning. There were also some issues with rules in CertView from the beginning. We hope that we have all the rules sorted out now. This would account for being "de-certified" on some of the OPN designations on some of your certifications. All certifications do not qualify for the OPN Certified Specialist designation - only certain, select certifications. You can find the qualifying list on our website here http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=342.
Regarding the OPN Certified Specialist certificates: in order to avoid too much more confusion, the decision was made to automatically send OPN Certified Specialist certificates only to candidates who obtain the qualifying certifications from December 1, 2009 (which is when the program was launched) forward. We will provide certificates upon request to candidates who had the OPN Certified Specialist added to certifications that were obtained before that date. What we wanted to avoid was randomly sending certificates to candidates who may not be aware of the program and adding confusion to a confusing situation. Please send an email to [email protected] and request to receive the OPN Certified Specialist certificates for your qualifying certifications. You may also want to confirm with the team your understanding of which certifications qualify so that you'll know what you are receiving.
We know that the roll out of this OPN program has been confusing and we hope to clear up the confusion more and more as we move forward. Thanks to all for your patience as we iron out the details!
Thanks,
Brandye Barrington
Certification Forum Moderator
Certification Program ManagerThat's fine. Brandye, I've submitted the note to [email protected] already. -
IOS 7 very slow, i have many problem , exemple download documents , typing doc to go . Very slow, sometime no response , please help us for this error,
spacepilot wrote:
i live in the WS10 / 0121 area and have been having similar problems. i have an up to 20mb services, but up to a month ago connected at 4800, then my line went dead for 6 days, and all indis could do was send me new router, which came the day after my line was restored, but had dropped to 2418 and remained so for the past 3 to 4 weeks, then i dropped to 1963 yesterday, and 729 today.
all speeds are far lower on my upto 20mb than they where on my upto 8mb link.
foegot to add, i reported the problem via the report a problem link, which hopefully will be red by someone with a firmer grasp of english that the normal call centre staff
welcome to the forum why don't you start your own subject and post the adsl stats from your router and also run btspeedtester and post the results and someone may be able to offer assistance
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Hello
I am moderator of "community Help France" and I have creative suite CS4. I wonder if Adobe has an upgrad for moderators because I don't know how to moderate a version if I don't know them.
without upgrad, remove me as moderators because I will be useless ...
I Call adobe France without solution and tchat with Adobe through the pages of moderators also unresolved ...Hello
So far, no sign of life from Adobe France ... I made some tutorials for CS4 (videoto brain, Adobe Tv), I manage web forums whose "repaire numérique" (www.repaire.net ) especially those whose adobe and it is unfortunate, the little consideration for its Adobe representatives but it doesn't matter, I spend on something else.
Best regard
Jy Bort
www.avs66.com
De : Kirsti Aho [email protected]
Envoyé : mercredi 30 mai 2012 06:59
À : JYBort
Objet : Forum moderator needs CS6
Re: Forum moderator needs CS6
created by Kirsti Aho <http://forums.adobe.com/people/Kirsti-CA> in Community Help Application - View the full discussion <http://forums.adobe.com/message/4449646#4449646 -
Is this forum moderated/monitored by a Sun representative?
While I agree that including a service wrapper for Windows would be useful, this functionality is not part of the product. The J2EE SDK is not intended for production use, but rather for development and testing purposes.
It appears that the Java Service Wrapper, which you apparently are familiar with, was used to wrap JBoss as a Windows service. I'd imagine the procedure do the same thing to the App Server's default domain is similar.
-Ian Evans -
Hi Forum, can u please help? iRecently bought a macbook pro and garageband 11 was working fine but now it's showing a question mark in the dock and it won't open. I think it may have been accidentally trashed. I've searched the trash and spotlighted but don't know what to do next. Any ideas? Thanks.
How did you install GarageBand on your Mac? Did it come preinstalled with the other iLife applications?
If your MacOS supports the AppStore, you should be able to redownload GarageBand from the AppStore, see this support Article: OS X: About OS X Recovery on how to download again:
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications.
Regards
Léonie -
Support boards for developing dashboard widgets? any response, please??
i don't mean to be a noodge, but 4 days ago i posted a simple request asking if i could get support here for some questions i had as regards some snags i ran into making dashboard widgets. while other people's questions about ruby/rails, c and objective c and even powerpoint (shouldn't that be in a microsquish support forum??) have been responded to.
all i want to know is, can anyone help me here or at least point me to other support boards that offer help for those developing dashboard widgets? is that too much to ask?
my original message i posted 4 days ago is below. i would appreciate response from anyone, please. i can't believe i'm the only person out here seeking support for my *.html, *.css and javascript files for dashboard widgets.
hi,
i'm trying my hand at the most rudimentary of developing for mac os x - developing a dashboard widget, using html, css & javascript.
i'm trying to make a simple widget that uses the real audio plug-in in the system (if you downloaded real player) to play a local portland, oregon fm classical radio station, kbps-fm 89.9 (www.allclassical.org).
i'm running into some snags both in making the "i" info button flip the thing around (it was working before, but since i added in the code that makes the real player plug in work, no matter where i place the position of the "i" flipper, it doesn't show up), and in the graphics i'm trying to create for the widget.
should i seek help here? are there better boards/forums for mac os x dashboard widget creation i can go to, and if so, can anyone direct me there? i know about adc, and am a (free) member, but they don't have discussion boards there and i don't want to pay oodles in tech support just to get some basic javascript and css questions handled.
if anyone could please direct me to where i can ask these questions or help me out, please let me know. thanx.
-- faddah yuetsu wolf
portland, oregon
[email protected]Hi
i don't mean to be a noodge, but 4 days ago i posted
a simple request asking if i could get support here
for some questions i had as regards some snags i ran
into making dashboard widgets. while other people's
questions about ruby/rails, c and objective c and
even powerpoint (shouldn't that be in a microsquish
support forum??) have been responded to.
You shouldn't take the lack of response as a personal insult The nature of these forums (fora?) is that people respond to those messages where they can help and don't respond when they can't help. FWIW I've got two unresolved questions dating back to Mar 17th!
In my opinion, the Developer forums would be absolutely ideal and on-topic places to discuss Widget development..... but it looks like very few experienced Widget developers hang out here, so any questions would most likely go unanswered. My own skill area in limited to Java so I can't help out with widgets. No doubt the other forum regulars are in a similar position.
Bob -
Purpose of this Forum (Server General) *** Please Read Before Posting ***
Welcome to Windows Server General Forum !
This is an English TechNet forum, Please post your queries in English !
Scope:
The name "General" has a very broad significance and sometimes that might lead to some ambiguities.
The scope of this forum is to answer General "Server Administration" related queries pertaining
to Windows Server 2003, Windows Server 2008 / R2 and 2012 operating systems.
Again, "Server Administration" has innumerous aspects and at times it becomes bit difficult to categorize
them.
We try to answer your questions in General or provide troubleshooting support in depth as and when necessary
based on the context of the query.
Questions could be related to AD, GP, Server OS related Queries/issues/errors, general troubleshooting etc…
list is too huge and it's highly difficult to elaborate them here :-)
We understand that this scope and purpose can be a little confusing, we apologize for any confusion.
If you might not know the scope or purpose of this forum, we'll redirect you to read this thread if we need
to explain how this forum works.
Out of Scope:
Queries on following (but not limited to…) are Out of scope in this forum.
Scripting
SBS
- Small Business Server
IIS
Coding/Development:
Windows Client Operating Systems
Exchange
Server
Lync
TFS
SQL
server
Visual
Studio
.Net
SharePoint:
SCCM, SCOM
Third Party Applications
etc…
We might (but do not claim to) answer some of the out of scope questions directly here. If we do,
then it's just a Bonus ! and it's not the purpose or in the scope of what this forum provides.
Moving Threads:
It may happen that, your question might have been moved to this forum in an attempt by another moderator from
a different forum to help you find the correct forum or we might move your threads to an appropriate forum as and when necessary.
If a community member gave you the URL/link of a specific Technet forum, then you may request a move to that
specified forum (If a link to the forum category is specified; you'll still need to pick a specific forum from that category) or thread will be moved to the appropriate forum if a Moderator is around.
NOTE:
We cannot move a thread to another Microsoft forum that's not in the TechNet Forum System such as ASP.net,
IIS.net and Answers.Microsoft.com etc… So we can only provide links to those forums.
Marking Answers:
We propose a reply (such as a link about where to go ask your question) to a recent question as an answer,
and then we will usually wait one week (~7 days) before we mark it as the answer. We prefer you (the Asker/OP - Original Poster) to mark the answer, but we do not require it if you abandon the thread for a long time.
If you (the Asker/OP - Original Poster) refuse to let us propose and mark an answer (without telling us why
and helping us figure out the alternatives/workarounds), then we might need to lock a thread or move it to the Off Topic forum.
Please Read Before Posting:
How
to ask a question efficiently in TechNet forum
We have dedicated Server
Forums for different products/technologies, please consider posting your queries in appropriate forum for better help and support.
If you can't figure out where exactly to post your questions, please seek help in "Where
is the Forum For...?" forum and you will be given a URL/Link to an appropriate forum where you can post your questions.
Official
Microsoft Forum Sites
Credits:
Ed
Price - MSFT (Forum Owner)
This sticky has been created inspired by the Sticky on Where is the Forum for.. forum.
Regards, Santosh
MVP - Directory Services
I do not represent the organisation I work for, all the opinions expressed
here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
Blog | Wiki
If you have issues with your account verification or you can not post images, please get your account verified
by posting request in below linked thread.
Verify Your Account 7Something new (or not noticed by me before) then as this thread appears as normal discussion in
My Thread view.
Regards, Dave Patrick ....
New UI has this functionality i.e. if you reply on a sticky, it will appears as a 'Discussion' in thread view.
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own and posted AS IS. -
Threads not updating responses - please disregard
Please disregard, sorry, I missed that there was a 2nd page of the thread, which shows the response.
Wondering though why it does not show "load more items" button at the bottom like it does with the overview page. Lack of interface ergonomics.
For instance: https://forums.oracle.com/thread/2550097
I opened the thread to write a response.
The messages appears in the Overview Abstract and preview page, but when I open the thread it is not there. I'm using flat views (I find threaded view, which is the default very inconvenient when reading a large thread)
This is the second time I experience this problem. Waiting for 30 min. for the response to appear. Previously the missing response appeared right after I posted another response, but that's not the way it should work.check the time and date settings of the phone.
The backup feature in the settings does save your SMS to the cloud. There is no way to access the backup. You can restore the backup after you reset the phone. -
Complaints - Lack of response - Please Help!
Here is a copy of an email that i have sent to BT twice in the last 4 days, as yet i have not received a response or even an acknowlegement.
Hi I have a complaint about my BT bill that I tried to resolve with no success via telephone this morning.
I am currently a long-standing BT customer signed up to the unlimited anytime plan plus friends and family mobile at £4.99 month. This is a continuation of a 12 month contract that I took out when I returned my calls to BT. Upon checking my bill (more closely than usual) I have discovered a discrepancy between what I thought I was paying and what I am actually being charged each month. If I log onto MYBT.COM>PHONE>CALLING PLANS & ADD ONS it states that my monthly charge including line rental is £16.53 ( I appreciate that this may increase by 50p to reflect another Line rental increase). However when I then look at the PDF copy of my latest Bill it states that my Calling Plan and line rental is £19.28, if I remove my £1.25 paper discount this equates to £17.78 not £16.53 as stated on YOUR website MYBT.COM when I log in.
When I spoke to one of your billing representatives today 'RAVI' said that he would refund the additional amount I have been paying on condition I signed up for another 12 month contract. When I said that this was unacceptable to expect me to agree to another minimum term contract when the error was BT's he said that was all he could do.
He stated that I was on the unlimited calls plan but was being charged £5.99 as I was not 'in contract' I explained that when I reached the end of my last minimum term contract that I spoke to BT and they advised that I would continue on the £4.99 deal without agreeing to a new contract term. Whilst the amount in dispute is very little I am somewhat disappointed in the way that this has been handled. Imagine if BT were to apply this charging model to all customers the amount would be very substantial.
I have always said to others that I have stayed with BT because whilst they are not the cheapest they were the best at what they do. Maybe it is time to reconsider where I should be routing my line rental and calls in the future.
I would like to hear your views on this matter
On another note when I try to complain via your ‘helpful’ website using the following link http://bt.custhelp.com/app/contact_email/c/2702,2706 I keep getting an error message saying ‘Your phone number must begin with a 0 or 1’ I have filled in the form correctly and cannot seem to submit it
Thanks in advance for any help.
Solved!
Go to Solution.Hi Craig
I understand your frustration when waiting for a response.
I've been there on a few occasions
The mods do receive a lot of email's, they'll get round to you as soon as they can
Did you provide a link to this thread (for reference) when you sent the email?
-+-No longer a forum member-+- -
Creating sales order using batch split--immediate response please
Hi all,
Thanks to each and every one on this forum for their valuable inputs.
I need the procedure to create a sales order in two ways
by splitting the material into 2 batches and doing the delivery for a single sales order and also delivery the material of same batch in single sales order to be delivered in partial deliveries
example 1: Material was A ordered 10 pcs 6pcs belong to 1 batch xxxx1 and 4 pcs belong to another batch xxxxx2 they need to be deliveed in the single delivery
example 2:Material A was ordered 10 pcs belong to batch xxxxx1 but to be delivered 6pcs in one delivery and 4 pcs in the other delivery
Please let me know the procedure to do this in detail
Thanks
Edited by: sapsd2help sap on Apr 17, 2008 4:21 PMHi,
You can do the scenaio in the following way
Example 1: Material was A ordered 10 pcs 6pcs belong to 1 batch xxxx1 and 4 pcs belong to another batch xxxxx2 they need to be deliveed in the single delivery
While creating the sales order, you can enter material A as two line items, one for 6 pcs and another 4 pcs.
and While creating the delivery you can give two batches for two line items, like for 6 pcs you can give batch as xxxx1 and for 4 pcs line item you can give the batch as xxxx2. in this way you can delivery Material A of 10 pcs, into two different batches one for xxxx1 and another for xxxx2.
Example 2 :Material A was ordered 10 pcs belong to batch xxxxx1 but to be delivered 6pcs in one delivery and 4 pcs in the other delivery
This is nothing but partial delivery.
You can create the sales order for the material A for 10 pcs, and in the delivery while you can manually change the delivery qty and pick qty to 6, and give the batch of your choice (xxxx1).
Now the order of 10 pcs is partially delivered for 6 pcs and another 4 pcs are still open.
You can create the second delivery with reference to the same sales order, now the delivery show the remaing qty (say 4) in the delivery, you can give the batch (xxxx1) and do the delivery.
But see that to do partial delivery, check the customer master of the customer -> sales area data -> shipping tab -> partial delivery allowed is checked
Hope this is clear.
Reward if helpful.
Thanks,
Praveen -
This forum and Safari please tell me what to do!
I have to Camino just to use this forum, Safari will not work with it any more.
Please do not move this topic to the safari room because its not safari. Safari is fine on just about every other web page I visit, except apples own!
Problems:
Viewing next page threads. Usually you can get the first page up but going to the next page no go.
Getting to 'your posts' Usually won't load.
Posting a reply. Easily the most frustrating problem. You can sometimes fly through the fourm to the reply, type your reply and nothing, it refuses to load, either safari bombs out saying it could not connect to server or a new pages loads on the web site saying there was an error. also if you click refresh or stop whilst trying to post the mssage the 'post' button is now disabled. The only way to do anything is to copy the text launch Camino and do it from there where it works every single time.
It is the most frustrating problem and makes using the forums very difficult.
If I am the only one fair enough, tell me what I need to do to fix the problem.
Thanks!Gary,
discussions may sometimes be slow for an hour or so (at which point the opening page of discussions will eventually apologize for the inconvenience, back on line soon...) but your description looks like a cache problem.
Try OnyX freeware to do some cleanup and see if that helps.
http://www.titanium.free.fr/index.html -
Very Slow Broadband - Moderator Help Please
In the past (Mid 2010) I was getting over 1Mbps speed. BT line checker tells me I should be able to get 1-3Mbps.
Most recent BT speed check on the line shows:
Download 239Kbps Acceptable speed range 50-500Kbps
Profile 350Kbps
DSL download 544Kbps Upload 448Kbps
I month ago I called BT to ask them to check the line and raise the profile. It was briefly raised to 750Kbps and speed improved for a while but seems to have quickly been reduced to 350Kbps.
I have option 2 with 40GB allowance but at these speeds obviously get nowhere near using the allowance.
I checked on Sam Knows and noted that the exchange (Bramley) has recently unbundled with Talk Talk. Could this have led to a speed reduction for those with BT?
I cannot understand:
1. Why my profile is so low and has been reduced (I have not been rebooting my BT Homehub)
2. Why the overall speeds this year are so much slower than 2010.
Note that I have tested the speed regularly and have used a wired connection to my Hub, which is connected to my master socket, with a recently-fitted BT accelerator.
Speeds of 200-300Kbps render apps like iplayer useless and mean that downloads take hours and days (for films). Any help and suggestions would be much appreciated.
Thanks
Solved!
Go to Solution.Hi Welcome to the forums
A couple of points from your post talk talk unbundling would have had no effect at all
also although you may not have rebooted the home-hub it may have rebooted itself at any time this would have caused an ip profile drop which has reduced your download speed
If you post the full stats from your router
For homehub – type 192.168.1.254 into your browser
Navigate to ADSL Settings or use the A-Z at the top right of the home page and scroll down to ADSL Settings and click on it
Click on More Details and then post the full results.
also post the full results from http://speedtester.bt.com/
or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
Then someone here may be able to help and offer more advice.
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
Getting error in Forum Moderator Summary
Hi all,
I have configured Forum into portal. Created the iView based on the template (User, Admin, and Initial Admin view). All the forum iViews are working fine. I enabled the moderator for particular category
For egs: Root Category --> Travel (set moderator for particular user).
If anybody creating the new thread under that category the Moderator receives a notification here
Forum Admin iView --> Content --> Moderation --> Moderation Summary
Moderator has option like as Approve, Reject, Defer and Edit anything can do, but once he Approvers then only that thread will publish in Forum User iView. This functionality is working fine.
If it has no notification of Moderator (no thread will create under that category) that time if Moderator goes and checks here Forum Admin iView> Content>Moderation--> Moderation Summary, getting error as Object Required. on the line which is marked as bold in below function
function setCurrentRow (index) {
if (currentRow != null) {
if (currentRow.index != index) {
document.getElementById("mod-row-img-"+currentRow.index).style.visibility = 'hidden';
currentRow = document.getElementById("mod-message-row-"+index)
var imgcon = document.getElementById("mod-row-img-"+index)
var subject = document.getElementById("mod-subject-"+index)
imgcon.style.visibility = 'visible';
subject.focus();
currentRow.index = index;
} else {
currentRow = document.getElementById("mod-message-row-"+index)
var imgcon = document.getElementById("mod-row-img-"+index)
var subject = document.getElementById("mod-subject-"+index)
imgcon.style.visibility = 'visible';
subject.focus();
currentRow.index = index;
Regards
Thillai JYeah, same for me. For five days the forum has been messed up each day differently for me. Business card gone, points gone, control panel gone, badge gone... I wager the forum is being rebuilt. If not, there's something seriously broken :-D
Maybe you are looking for
-
I have a table of the format:= person_id number, phone_type varchar2, phone_number varchar2. Eg:= person_id,phone_type,phone_number 1 home 123456 1 work 456789 1 mobile 989076554 2 home 456789090 3 home 4567890 3 fax 345678 3 mobile 23456789 I want t
-
An app I purchased and downloaded directly to my Ipad is missing and not in my app files on my PC. When I go to the app store to re-download it I can not and the app says I have already downloaded it. How do I get my app back?
-
Using Prototype.js in JDeveloper
Hi All, I'm attempting to learn more about AJAX and was going over the examples int he book AJAX in Oracle JDeveloper. In chapter 3 I ran into a snag. It looks like the prototype.js functions are not being reached from within my input.js file. The sa
-
No messages in moni but in Idx5
Hi experts, we have file to idoc scenario and once file has been updated idoc has to be generated in ECC. But now i cant see any of messages related to this interface in moni from last one year in production. When i try to see in Idx5 i can see messa
-
Email addresses fromThunderbird to Sony Xperia V
I've recently acquired a Sony Xperia V. I am a novice on smartphones and want to understand more about emails.I set up email via the email app on the phone. Who runs the app - Google? If so is this what is known as Gmail? When I tried to use Xperia t