Is this forum moderated?

Is this forum moderated/monitored by a Sun representative?

While I agree that including a service wrapper for Windows would be useful, this functionality is not part of the product. The J2EE SDK is not intended for production use, but rather for development and testing purposes.
It appears that the Java Service Wrapper, which you apparently are familiar with, was used to wrap JBoss as a Windows service. I'd imagine the procedure do the same thing to the App Server's default domain is similar.
-Ian Evans

Similar Messages

What's Going On With This Forum? Posted comments wait for a moderator

They wait, and wait, and wait, and wait.
Whose policy is this to screen everything before allowing posts to show up? Is that a Toshiba policy? What is Toshiba afraid of? If this is a Toshiba policy, I object. I object very strongly. Strongly enough that I'm just about tempted to pack up the mini notebook and ship it back to B&H and buy a different brand where the manufactor doesn't censor the support forum.
Let's see if this shows up.

Hello Edmund
To be honest I don't understand your question. As I can see you have posted 40 times until now.
Be honest and tell us how often you saw message like this:
*Please note, your reply will need to be approved by a moderator before it is posted in the forum.*
Probably first time now. I have noticed that sometimes forum is closed for postings but there must be some reason why moderator do this. At the moment you can write what you want.
There is no reason for panic or comments about Toshiba policy.
Every serious forum has own policy and this forum is more than serious. Isnt it?
So it is nothing unusual and it can be done due to some technical or any other reason.
Look a little bit what people write here and you will find very critical postings but nothing is blocked or edited by Toshiba so I think this forum is free and democratic. Your posting is also published.
In my opinion it is the best evidence that your critic and opinion about this forum and Toshiba forum policy is completely unjustified. Do you agree with me?
Good luck!

"You do not have permission to post in this forum"

I have another account that cannot do anything much at all, and I would like to get it fixed without a five day wait for a Genius Bar appointment, then a 1 hour bus trip each way with an "I can't help with that" in the middle.
The account has been broken for over a year. This is what happens:
I can submit a question to the community.
I can open any postings that show as matches.
If there are no matches and I get thrown to the list of communities, then I can't view or post to any of them. I see the product names and icons (iPad, for example, but the list of related communities on the right is missing for all products. Which seems unfair because I own most of them.
You do not have permission to post to this forum
It appears you are not allowed to view what you requested. You might contact your administrator yadda yadda.
I have posted about this before:
https://discussions.apple.com/message/17393255#17393255
with no real answer (a threat of possible help, if you like, but with no resultant benefit.)
My question is - how does one get help with the help forums? I have phoned Apple's help desk and they said they could not do anything.
I would really like to get my primary account working - it connects to the right email address, it all set up and comfortable - and it does not use my name and location as an alias (who's idea was that? Fire that person!)
If you know of any court of appeal, help desk support forum support line, 21-step program or anything else that might help, please tell me. This has gone on long enough.
I tried to do something about this from the other account but to get support for the support communities you have to be able to post to them.
"That's some catch, that Catch-22"
"It's the best there is."
Thanks in advance for your help.
PG.

Seventy-one - To my knowledge, I have been a model citizen. And not impertinent of you at all - a very reasonable question. All words have been 1-3 or 5+ letters long, I certainly have not received any communication (that I have been able to find) that indicates a transgression. And there is another question - which castle, and are you saving for the deposit?
Bleach - other user name is "Ploughguy". But I was more after a means of contacting those with influence myself. Most fora like this have a contactable moderator or administrator. I am rather amazed that one needs the intercession of the saints. Such as St Roger...
Roger - This situation. The "can't look-can't post" situation. It has been (not) happening for some time.
I previously raised the issue here .
BTW, I created yet another ID because I was not careful enough when I set up the second ID and it defaulted to "NameFromSuburb". This is OK for johnfromnewyork but a huge privacy risk if you are ranulffromlittlestorpingintheswuff - an unusual name in a small place. I do not know how that default got through the peer review. Basically it says "ranulf has the good taste to own an Apple something which is portable and fenceable, and he lives not far from here". I have suggested to the privacy people that it is a very bad idea. And yes, I realise my alias is already out there. I have asked the privacy people to blow it away.

Who Runs This Forum

i am told that this forum is not run by BT. Yet it has the BT logo. And Sages on here post tens of thousands of posts. It's almost like they are employed to do it. What is going on. Come on, this is a BT run forum isn't it?

This is a customer to customer self help forum posts made here do not go to BT although the forum is moderated by BT not every post is read and posts do not go to BT directly
this link explains more https://community.bt.com/t5/Announcements-Terms/BTCare-Community-Forums-User-Guidelines/m-p/1375043#...
Everyone here are BT customer like yourself NONE OF US ARE EMPLOYED BY BT with the exception of the forum moderators who are the only BT employees here
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Signing in to this forum

I think I used to be able to sign in and come straight to this forum. Now I have to go to the general Discussions, pick OS X>Using Mac OS X. Is there any easier way? My bookmark takes me to this forum, but once I sign in, I'm kicked back.
Thanks,
Allan

Apple has been doing some maintenance to fix a few "bugs" in the forum software, but sometimes new or repeat ones creap back in. It has done as you described in the past. Just put up with it & it will be fixed.
If you post your comment in the Discussions Feedback @ http://discussions.apple.com/forum.jspa?forumID=1076 it's more likely to be seen by a forum moderator.
 Cheers, Tom

Purpose of this Forum (Server General) *** Please Read Before Posting ***

Welcome to Windows Server General Forum !
This is an English TechNet forum, Please post your queries in English !
Scope:
The name "General" has a very broad significance and sometimes that might lead to some ambiguities.
The scope of this forum is to answer General "Server Administration" related queries pertaining
to Windows Server 2003, Windows Server 2008 / R2 and 2012 operating systems.
Again, "Server Administration" has innumerous aspects and at times it becomes bit difficult to categorize
them.
We try to answer your questions in General or provide troubleshooting support in depth as and when necessary
based on the context of the query.
Questions could be related to AD, GP, Server OS related Queries/issues/errors, general troubleshooting etc…
list is too huge and it's highly difficult to elaborate them here :-)
We understand that this scope and purpose can be a little confusing, we apologize for any confusion.
If you might not know the scope or purpose of this forum, we'll redirect you to read this thread if we need
to explain how this forum works.
Out of Scope:
Queries on following (but not limited to…) are Out of scope in this forum.
Scripting
SBS
- Small Business Server
IIS
Coding/Development:
Windows Client Operating Systems
Exchange
Server
Lync
TFS
SQL
server
Visual
Studio
.Net
SharePoint:
SCCM, SCOM
Third Party Applications
etc…
We might (but do not claim to) answer some of the out of scope questions directly here. If we do,
then it's just a Bonus ! and it's not the purpose or in the scope of what this forum provides.
Moving Threads:
It may happen that, your question might have been moved to this forum in an attempt by another moderator from
a different forum to help you find the correct forum or we might move your threads to an appropriate forum as and when necessary.
If a community member gave you the URL/link of a specific Technet forum, then you may request a move to that
specified forum (If a link to the forum category is specified; you'll still need to pick a specific forum from that category) or thread will be moved to the appropriate forum if a Moderator is around.
NOTE:
We cannot move a thread to another Microsoft forum that's not in the TechNet Forum System such as ASP.net,
IIS.net and Answers.Microsoft.com etc… So we can only provide links to those forums.
Marking Answers:
We propose a reply (such as a link about where to go ask your question) to a recent question as an answer,
and then we will usually wait one week (~7 days) before we mark it as the answer. We prefer you (the Asker/OP - Original Poster) to mark the answer, but we do not require it if you abandon the thread for a long time.
If you (the Asker/OP - Original Poster) refuse to let us propose and mark an answer (without telling us why
and helping us figure out the alternatives/workarounds), then we might need to lock a thread or move it to the Off Topic forum.
Please Read Before Posting:
How
to ask a question efficiently in TechNet forum
We have dedicated Server
Forums for different products/technologies, please consider posting your queries in appropriate forum for better help and support.
If you can't figure out where exactly to post your questions, please seek help in "Where
is the Forum For...?" forum and you will be given a URL/Link to an appropriate forum where you can post your questions.
Official
Microsoft Forum Sites
Credits:
Ed
Price - MSFT (Forum Owner)
This sticky has been created inspired by the Sticky on Where is the Forum for.. forum.
Regards, Santosh
MVP - Directory Services
I do not represent the organisation I work for, all the opinions expressed
here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
Blog | Wiki
If you have issues with your account verification or you can not post images, please get your account verified
by posting request in below linked thread.
Verify Your Account 7

Something new (or not noticed by me before) then as this thread appears as normal discussion in
My Thread view.
Regards, Dave Patrick ....
New UI has this functionality i.e. if you reply on a sticky, it will appears as a 'Discussion' in thread view.
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own and posted AS IS.

How to upload Apex-application in this forum

i want a help. i develop a apex-applicatin . by use apex-4.2. now i want to upload my app: in this forum. how to i do it? plz give me suggest.

Moderator Action:
Your post has been moved from the Storage General Discussions forum space
(where it definitely didn't belong - this isn't a storage hardware question),
to the Application Express general discussion forum, for a guess at closer topic alignment.
... and to answer your question?
You don't upload your application to a discussion forum.
Perhaps you might get a clearer picture of what Apex is by reading previous forum threads in this space - perhaps read the last two years' worth of such posts.

CTRL+V is requested by this forum body to paste here

I want to paste a photo to this forum body.
The forum body request that I use CTRL+V to paste.
This does NOT work here.
I can paste text, but NOT a photo.
I can paste with CTRL+V the photo I want to paste to a WORD document (.docx) but not here.
What am I doing wrong?
This question was solved.
View Solution.

Hi,
To insert an image with your post, use the 'Insert/edit Image' option in the text editors toolbar to upload it from your computer- see the image below.
Note: Although the image will be immediately visible to you, the rest of the community will not be able to view it until it has been approved by a moderator.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Forum Moderator Please help find my message

Dear Forum Moderator:
Yesterday (09.20.08) I placed in the FLASH General Discussion
forum a message about problems in using Flash in my User's account.
I do not remember the exact title but there were words: user,
account, counterproductive.
The message was authored by my screeen name Fonarik
I DID see this morning this my message, but after I signed
off and then back again I can NOT find it.
Please help to find it, as I hope to get help on my problems.
Thank you

Fonarik wrote:
> Urami:
>
> You are not correct in: "I only see one post by you,
this very post
> and nothing else ever posted from this nick name".
> Please look at my message above and to the LEFT. You
will see that I posted
> TWO messages: the one that disappeared (or was
deliberately taken away as NOT
> PLEASANT to Adobe) and this my asking for finding it.
>
> By the way please clarify what you mean by applying to
other spots - I do not
> understand.
>
> Thanks for attention
Not going to try to prove my point, just look at the obvious:
This is the NEWS READER screen, loading messages directly
from the Adobe News Server.
View forum by user name, only two posts, the first one "Forum
Moderator..." and
the reply to my post just now:
http://flashfugitive.com/stuff/sc_01.gif
My news reader has copies of posts for past 3 years.
Then by browsing Web Based Forum, searching for all the
threads by your user name:
http://flashfugitive.com/stuff/sc_02.gif
Just one... in past 90 days...
Don't believe in "shoosh" conspiracy theories. Adobe (and
previously Macromedia) never
suppress any posts. In fact they encourage posts dealing with
all kind of issues because
it helps the tech guys to learn about problems they could
over look during very compressed
and short testing period.
You simply post it incorrectly and it never made to the
forum. Just post once again
because no matter where you believe in, there simply isn't
any other, beside this one, posts
from you on the forum.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Forum Moderator Response Please

Greetings Forum Moderator,
Could you please explain why you remove my post/response to ovm 2.2 hard partitioning and licensing - getting my head around it! and why you did not remove the other response to ovm 2.2 hard partitioning and licensing - getting my head around it!
Please let me know why you remove all of my posts with links to my book and blogs, and why you allow other to post links to other content, i.e. from oracle, hp, other blogs, etc... but you always remove my posts with links to my book, blogs, etc....
Thank you for your support and great work with this forum!
Respectfully,
Roddy Rodstein
[email protected]

Roddy,
My frustration with people that paste incomplete responses
... and it's not just those few posts of yours but from a number of other people throughout all the many sub-forums...
is that people post a question and hope for guidance.
Responses are hopefully given so that the original poster and ANYONE ELSE that reads the thread in the future can get the assistance with what might be phrased as one-stop-shopping -- right there in the forum thread.
Your forum reply might prompt other people to recall an additional tidbit of help and they will add their reply to a thread and so on, and so on. In the end there is an almost complete solution to whatever issue prompted the initial post.
Think of these community forums as an imitation of a helpdesk from a support structure of a complex technical company. The sum total of all the thousands of posts and tens of thousands of replies create a knowledge base that complements the official knowledge base of the company.
I do look forward to you contributing to that knowledge base.

To Cert Forum Moderator : Please advice what I can resume my CertView.

Hi Moderator ,
I'm so disappointed. Since this Thu, my certview account had rejected my login and requrie authorization verification agian !!
Ridiculous !!! Last time, certivew took more than 3 months to authorize my account and post OCM result to my cert history .
To Certification Forum Moderator : Cert Update from CertView so slow
Thist time, I can't help to annoy. How long I must be held this time !!!
Please give me some advices.

Certification Forum Moderator wrote:
Sean KTN,
I am glad your CertView issue is sorted out, could you please send a note to [email protected] anyway and let them know what happened, when it started and when it was resolved. Please give them as much info as possible, including your SSO info as well as your candidate ID. If there is a bug in CertView, we need to do a little research and get it sorted out. Please reference this thread in your email simply by stating that this is in reference to a thread on the OTN Forum that was refered to them earlier by Brandye Barrington and provide a link to the thread. This way, they will have some background info. It is often difficult to follow up on issues in the forum because we don't have all the candidate's info.
To the other candidate who was also having trouble with this issue. Please do the same.
Regarding the OPN Certified Specialist designation; unfortunately, this has been confusing from the beginning. There were also some issues with rules in CertView from the beginning. We hope that we have all the rules sorted out now. This would account for being "de-certified" on some of the OPN designations on some of your certifications. All certifications do not qualify for the OPN Certified Specialist designation - only certain, select certifications. You can find the qualifying list on our website here http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=342.
Regarding the OPN Certified Specialist certificates: in order to avoid too much more confusion, the decision was made to automatically send OPN Certified Specialist certificates only to candidates who obtain the qualifying certifications from December 1, 2009 (which is when the program was launched) forward. We will provide certificates upon request to candidates who had the OPN Certified Specialist added to certifications that were obtained before that date. What we wanted to avoid was randomly sending certificates to candidates who may not be aware of the program and adding confusion to a confusing situation. Please send an email to [email protected] and request to receive the OPN Certified Specialist certificates for your qualifying certifications. You may also want to confirm with the team your understanding of which certifications qualify so that you'll know what you are receiving.
We know that the roll out of this OPN program has been confusing and we hope to clear up the confusion more and more as we move forward. Thanks to all for your patience as we iron out the details!
Thanks,
Brandye Barrington
Certification Forum Moderator
Certification Program ManagerThat's fine. Brandye, I've submitted the note to [email protected] already.

Questions for anyone using this forum

is this forum only for people who have problems with apple stuff to go and complain so that we feel better, because i've posted numerous questions on this and other forums, non have gotten replies. i really feel as though this is only a place where people can go to vent some frustration with things. i'm not even sure if there's a guy (or team,which there should be,) out there just looking at these questions and trying as best as they can. now i understand if its only a group of like ten gpeople there to help us because there has got to be at least a million people, if not more, out here sing mac products and experienceing problems. i just want to know if its really that hard to get a little responce about things. we have problems, we come here for answers because thats where apple tells us the answers are.
now my latest question may not be able to be answered by an apple tech, but, where is the best place to hock an iPod for $$$. mine is dead and will not come back to life. i want to get another iPod but its not in my budget unless i can sell my current dead iPod to put a down payment on a new one. so if theres anyone out there with an answer, please respond, otherwise its like talking to a wall.
Windows XP Pro 20 gb iPod photo

No, this is definately not a place just to complain so you can feel better. These are user-to-user support forums. Nobody here works for Apple (other than an occasional moderator). We're just users like you who enjoy helping others.
I haven't seen your other posts, but usually if a post goes a while without a response, it's because the post either doesn't provide enough information, or is just a rant and doesn't ask a specific question. Post a detailed description of your problem without ranting about it and you will be very likely to receive help.
If your iPod is dead, you can either sell it on ebay or somewhere (people will buy non-functioning iPods), or take it to an Apple store and give it to them and receive 10% off a new iPod.
Cheers!
-Bryan

Do you think this Forum should be divided in two or three&

The HCM Payroll Germany, Austria & Switzerland (DACH) has been created more than a month ago and not a single thread had been posted in it until this morning.
Considering that the forum/category "ERP HCM (HR)" often sees more than 60 threads with postings per day,
I believe SAP's SCN should consider to create at least one or two new forum/category to help sub-divide the ERP HCM (HR).
Possibly ERP HCM - Payroll and ERP HCM - Time Management (and rename the other one ERP HCM - HR) ?
I had initially posted this question into the HCM Payroll Germany, Austria & Switzerland (DACH), my thread was moved to the "Suggestions and Comments" forum by a moderator, and now someone tells me to post it in the "Idea Place".
So I will asy you, the users of this Forum, whether you would like this forum to be divided into two or three (and what should be their "titles") ?

Remi
i only moved the thread to suggestion and comments forum , as that is right forum for the discussion
and comeing to your query yes i also wants the forum to be divided based on the Modules in HCM
But if we do that what in case of other modules say ABAP we ABAP HR also right
and i welcome your suggestion from HCM point of view

Introducing myself to this forum

Hello Everyone,
I have just joint this forum for helping others and getting help for myself too. I am an Accountant, deals with Corporate tax and personal tax returns.
And looking ahead for this forum, as I found it very supportive and helpful.
Thanks and Regards!
Canats

Apple has been doing some maintenance to fix a few "bugs" in the forum software, but sometimes new or repeat ones creap back in. It has done as you described in the past. Just put up with it & it will be fixed.
If you post your comment in the Discussions Feedback @ http://discussions.apple.com/forum.jspa?forumID=1076 it's more likely to be seen by a forum moderator.
 Cheers, Tom

Why people are sharing braindumps on this forum? Oracle should do something

Hi,
I have just come across one thread on this forum where people are openly sharing braindumps and oracle hasn't taken any action yet and that thread is still live.
http://forums.oracle.com/forums/thread.jspa?threadID=541904&start=0&tstart=0

user9152699 wrote:
Hi,
I have just come across one thread on this forum where people are openly sharing braindumps and oracle hasn't taken any action yet and that thread is still live.
http://forums.oracle.com/forums/thread.jspa?threadID=541904&start=0&tstart=0
I have put a post on the relevant thread on the sql/plsql forum and pointed to a blog indicating the correct route of study and marked the post as abuse. Hopefully the moderator of that forum will sort. I have also refered to ocpfraud_ww.
Edited by: bigdelboy on 27-Feb-2010 01:25 (And in answer to Hans's later post I did do the abuse icon button on the post)

Is this forum moderated?

Similar Messages

Maybe you are looking for