Free Goods price control

Hi,
Can anybody tell me what is reason for the SAP standard setting for GR of free material
if price control is moving average - only the stock quantity is updated.
if standard price control both stock and value of material is updated.
Regards,
Sachin

In case of std price yr stock will get updated with this price whatever may be the case..
MAP--in this case whatever the current price of posting stock will be added to previous price with this current price..
This is the concept of MAP & STD price..

Similar Messages

Free Goods Delivery Control

I set up the master data to "E" , and for every 5pcs , they get 1 pc free (exculsive)
When I created Sales Order and Delivery of 10pcs, i get 2pcs additional item free.
In the delivery, if i change the delivery quantity to 9pcs, the free goods is still 2pcs. If i change the quantity to 5pcs, that's the time it is changed to 1pc.
How can we set-up such that if it is changed to 9pcs (less than 10pcs), then free goods should be reduced to 1pc.

HI Gemma
Its free goods delivery control,
in free goods there are two types , inclusive , exclusive free goods
inclusive free goods:=
system configure free goods in inclusive option like free goods quantity is going to be included in order quantity
EX- For 10 item is free ,the system configures free goods as 9+1
hope this will solve your problem
regards
venkat

Free Goods price

I copied item category TANN to ZTAN ... everything is the same in item category details.. But when I created invoice, price is required for ZTAN.. when i use TANN, pricing is not required in the invoice.
Let me know what else is missing in my configuration for ZTAN? It should not require pricing in invoice since these are free goods.
thank you

HI
Kindly check the below settings
In the item category configuration VOV7
Item Type                                        tick   Business Item
Completion Rule                               tick   Sched.Line Allowed
Special Stock                                            Item Relev.for Dlv
Billing Relevance    A                                Returns
Billing plan type                               tick    Wght/Vol.Relevant
Billing Block                                     tick   Credit active
Pricing                                             tick    Determine Cost
Statistical value
Revenue Recognition
Delimit. Start Date
IN Copy control configuration VTFL
                                                                                Target Bill. Type F2                    From Delivery Type LF
                    Invoice                                  Outbound Delivery
Item Category      ZTAN
                                                             Free of Charge Item
Copying requirements   004 Deliv-related item          Billing quantity     B
Data VBRK/VBRP         000                                        Pos./neg. quantity   +
Pricing type         G
PricingExchRate type
Cumulate cost
Price source
check the above settings in your system
REgards
Damu

Free goods price discount when free goods are not required by customer

Hi
In a promotional activity for purchase of 10 items 2 free goods (which are different) have been determined, which is exclusive.
The customer wishes not to take the free goods and asks for a discount equivalent to the value of free goods, please advise on steps to be undertaken in this scenario.

Why dont u use "Pricing For Inclusive Free Goods Without Item Generation"
To do this, you can use the standard condition type NRAB. It is set up as follows:
It does not determine the discount from the condition record. It uses condition basis formula 029 in the pricing procedure to determine a discount from the free goods factor.
The condition receives the new pricing requirement 059 in the pricing procedure. This requirement checks whether free goods have already been determined.
The condition type receives condition category f. This condition category ensures that the condition is redetermined every time the quantity is changed, since this can also mean a change to the free goods quantity.
Hope this helps & Rewrad if does
Rgds

Free Goods Quantity Control

Greetings all SD Gurus,
Would really appreciate some advice here. Currently I have a free goods condition ( exclusive ) - NA00 for a material set in such way that :
For every 100 items ordered , there will be 5 free items of the same material.
The condition is working fine. But users wanted the quantity field for the free item to be program is such way that they can decrease the quantity of free items from 5 but they can't increase the free items to more than 5.
My question is - can this be configured in SPRO without creating a program in userexit . If yes, how do I go around it ? Or is there any other alternatives ?
Many thanks in advance.
Warmest Regards,
Ed Ong

Hi Ashish,
Thanks for your suggestion but unfortunately, it's not applicable for the requirement. What the user wanted was a checking procedure to run during the manual changes of quantity in free goods before the doc was saved.
Regards,
Ed

Assigning free goods in a purchase order.

Hi,
I have to generate a report which will display the purchase order no for each condition record created in mbn1, and for each purchase order no it has to fetch the free goods assigned, eligible and remaining.
i have created a condition record for a vendor, with the following particulars,
if the vendor e.g ven1 purchases material e.g mat1
min qty = 100
free goods qty = 10
add. free goods = 2
calculation method is prorated
and the type is Inclusive.
But when i try to create a purchase order for that vendor ven1 for 200 qty of mat1, the gross price being calculated is for 200 qty, but it should be calculated for the quantity excluding the free goods qty.
What might be the reason, do i have to do any configuration in SPRO, if so guide me with the steps or can you help me in solving this problem

Hi,
   I have maintained the condition record because i have checked the enry in the table KOTN001.
   i have also maintained the settings for discount in kind as follows.
1. MAINTAIN DISCOUNT IN KIND DEPENDENCIES
     I) Field Catalog.
        BSTME,
        EKORG,
        EKOKZ
        LIFNR,
        MATNR
        WERKS
     ii). Display Free Goods
          Table no 001 which has all the above mentioned fields.
2. DEFINE ACCESS SEQUENCE AND DISCOUNT-IN-KIND TYPES.
    i) Maintain Access Sequence
       Ac.sq     DESC
       NR00     Free Goods
      Accesses Ac Tab Desc                                          REQ
                      10    1    Info Record: Plant-specific           1
                                                             per order unit
                       20    2    Info record per order unit
     Access 10's Fields.
     Fields Condition I/O Doc.str Doc.field Long field Label
                BSTME,    I       KOMP   SAME
                EKORG,    I       KOMK    AS
                EKOKZ     I       KOMP   CONDITION
                LIFNR,      I       KOMK
               MATNR      I       KOMP
               WERKS      I       KOMP
               Source of constant Init
            should i specify any values for source of constant and select the check box init, if so why?
    Access 20's Fields.
   same as 10 except the field werks, which is not included in the condition.
ii) Define free goods type.
    ctyp   name              ac.sq               validfrom     validto
    NR00   Free Goods     NR00                2 (First       2(End of
                                                            day of the   the current
                                                                month)          year)
3.DEFINE AND ASSIGN DISCOUNT-IN-KIND SCHEMA
   i) Maintain Free Goods Schema
       Procedures
        Usage N
       Application M
        Procedure   Desc
        NR0001       Free goods ( purchasing )
       Control Data
        Step Cntr Ctyp Description Requirement
          10    0      NR00 Free goods     1
   ii) Determine Free Goods Schema
       Gr        Gr               Schema
       0001 Standard order NR0001
       0001 Retail vendor   NR0001
Are the configuration which i have done is perfect for my scenario, if not, please can you help me in proceeding further.
Thank You.

Free Goods - Not showing in sales order as subsequent item

Dear Gurus,
I have created a Free Goods procedure determination and maintained it at Customer/ Material level in VBN01.
The procedure is inclusive as follow:
For every 100 units purchased, the customer gets 10 units free
However at sales order level there is no indication at all that the Free Goods are being triggered.
When I check the pricing procedure, the condition record NA00 that I have used doesn't show-up.
There is no subsequent item in the sales order under the main item showing the Free-Goods discount.
Could you please help me go through the customizing process to correct the error?
Many thanks for your help
Chris

Hi,
FYI
Free goods can be configured in SAP by following two methods.
(1) Manually
(2) Automatically
Manually: By specifying higher level item category for a line item we can determine free goods as a free of charge
items during sales order processing.
Automatically: System proposes free of goods automatically in the sales order. In automatic free goods
configuration system follows two methods.
(1) Exclusive
(2) Inclusive
Exclusive: System configures free goods in exclusive option like free goods quantity is going to be excluded in
order quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 10 + 1.
Inclusive: System configures free goods in inclusive option like free goods quantity is going to be included in order
quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 9 + 1.
NOTE: In exclusive method other items also can be given as a free of charge items for order item.
Configuration steps: INCLUSIVE
SAP follows condition technique to configure free goods automatically.
Maintain pricing procedure
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Maintain pricing procedures
Choose free goods procedure NA0001 and select it
Click on copy icon on application tool bar and rename it Ex: SRI001
Condition type is NA00 and Access sequence also NA00
Save it and Exit
Activate free goods determination
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Activate free goods determination
Go to new entries
Specify our sales area, document pricing procedure, customer pricing procedure and specify our free goods
procedure Ex: SRI001
Save and Exit
Control free goods pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Control pricing for free goods item category
Choose item category TAN from position button
Specify the pricing as X = Pricing standard
Choose item category TANN from position button
Specify pricing as B = Pricing for free goods (100% discount)
Save and Exit
Maintain condition type for 100% discount
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain condition type for 100% discount
Check whether condition type R100 is available or not (R100 = is 100% discount)
Exit
Maintain pricing procedure for pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain pricing procedure for pricing
Choose our pricing procedure form position button and select it
Click on control data icon under dialog structure
Include condition type R100 between the steps of discounts.
Specify requirement = 55 and Routine No: 28 (100% discount) in Alt. CBV.
Save and Exit
Requirement 55: The Routine No. 55 is assigned to condition type R100. If the user wants to look both revenues
and sales deductions for the free items since the product that we are going to give as a free of charge item can be
sold separately in the same sales order. Then the item category of free goods TANN has the pricing value as B.
Then the system calculates value of the free goods as 100% discount as we discussed above the same material [that
is going to be given as a free of charge item]. Some times the same item is going to be given as a normal item.
Then system calculates price for normal item and system should not calculate price for same item [free of charge
item]. So as to perform this calculation we have to assign Requirement/Routine 55 is to assign condition type
R100.
Alt CBV = 28: [100% Discount] Condition type R100 should be taken as a ZERO value. The formula 28
calculates condition type R100 value as a ZERO.
Set Transfer of cost to Main item: [Copy control]: Transaction code: VTFL
Copy control is a concept by which the system copies the data from source document to target document.
Path:
IMG
Sales and Distribution
Basic functions
Pricing
Free goods
Control free goods pricing
Set transfer of cost to main item [copy control]
Choose Billing type F2 Delivery document type LF from position button
Select it and click on itemicon under dialog structure
Choose item category Ex: TAN
Click on details icon
Click on display or change icon
Choose item category as TAN again
Select it and click on details icon
Check cumulative cost
Save and Exit
Cumulative cost controls whether the cost value (VPRS) is to be copied from relevant sub items into main items.
Sub items cost are not relevant for billing.
Maintain copying control: Transaction code: VTAA
Path:
IMG
Sales and Distribution
Basic functions
Free goods
Control free goods pricing
Maintain copying control
We maintain copy control at item level category for free goods. In this field we can control whether the
free goods should also be transferred when we copy from one document to another document.
Choose source document type as QT and target document type as OR from position button
Select it and click on item control button under dialog structure
Choose AGN item category from position button
Click on display or change button
Again click on AGN
Click on details icon
Check Re u2013 explode structure/Free goods
Save and Exit
This indicator controls whether the free goods are copied from source document to target document or redetermined
again.
Maintain condition records for Free goods [INCLUSIVE]: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions
Free goods
VBN1 u2013 Create
Specify condition type NA00
Click on key combination
Specify all the data
Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the Material No., Minimum order quantity (Ex: 10), Specify [from] the free goods quantity (Ex:
10), Unit of measure u201CEAu201D (Each), Free goods (are free goods) as u201C1u201D.
Calculation procedure: We can specify the Routines for calculation procedure as 1 or 2 or 3
1 = Pro u2013 Rata (Proportionate): Ex: If the customer places order for 100 cases of material u201CXu201D, then customer
receives 20 cases of same material as free. That means, the business can say that buy 100 and get 20. If the
customer orders for 162 cases, then system automatically grants 32 cases as a free of cost (162x20/100 = 32 Cases).
2 = Unit of reference: When customer orders for 100 cases of material u201CXu201D, then the customer receives an
additional 20 cases as a free of goods. That means business can say that buy 100 get 20 free by granting 200 free
for every full of 100 cases. The customer places order for 162, then system automatically grants only 20 cases
(100x20/100=20).
3 = Whole unit: When a customer places order for 100 cases of material u201CXu201D, then the customer receives additional
20 cases of material u201CXu201D as a free of goods item. The business can say that buy 100 and get 20 free of charge items.
If the customer orders for increment of 100 that means 200 (100 + 100) items, then he gets 40. If he placed the
order for 101 u2013 199 items he gets only ZERO.
Save and Exit
Condition record for EXCLUSIVE: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions free goods
Specify the discount type u201CNA00u201D
Click on key combination
Click on Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the sales organization, distribution channel
Specify customer number and validity periods, material, minimum quantity, order quantity, unit of
measure, calculation procedure, free goods (3)
Specify additional material free goods (if other goods is going to be given as a free of charge item.
Save and Exit
Go to VA01 and raise the sales order for INCLUSIVE and EXCLUSIVE.
See the Free Goods effect.
Condition type NRAB = Free goods: Requirement = 59, Alt CBV = 29: [only for INCLUSIVE purpose]
Requirement 59: We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases
of product u201CXu201D, then he receives 10 cases of the product free. If the user would not like the additional line item in
the sales order for free goods rather than the discount of the 10 cases is represent in the same line item as other 90
cases. If the free goods discount should not apply on credit for returns that do not make reference in the previous
document.
Alt CBV 29: The condition type NRAB is to be assigned with 29 formula to support inclusive free goods
agreement where the user would have to apply the discount to the order item rather than having a sub item
generated for the free quantity.
Ex: The customer orders for 100 cases of product u201CXu201D, 10 cases are free instead of having a free sub item generated
b the system to represent the free 10 cases, the user would like to have a discount applied to the 100 cases line item
equal to the value of the 10 cases.
NOTE: Free goods can only be configured on document category type u201CCu201D (OR). That means we cannot configure
free goods on Inquiry and Quotation.
Header Conditions
SAP has delivered two kinds of condition types: (1) Header conditions
(2) Item conditions
Header conditions: The value of the header condition applies to the whole items in the sales document.
Header conditions do not have any access sequence.
So that, value of the header conditions should be maintained manually.
Ex: HA00, HB00
Configuration settings:
Include condition types HA00, HB00 in V/08 in between the discount condition types.
Go to VA01 and raise the sales order
Select line item and go to Go to button
Header Conditions
Include condition type HA00 HB00 with values [HA00 is percentage discount and HB00 is absolute
discount]
If HA00 = 1%, then system applies 1% on base value on all items in the sales order.
If HB00 = 100/- Rupees, then system applies 100/- Rupees proportionately to all items in the sales order. If sales
order has two items, then system applies 50/- Rupees to each item.
Click on activate button
Go to item condition screen
Check how system applied header conditions for line items
NOTE: Make sure that sales order contains more than one item.
Condition Scales
We can maintain scales for each and every condition type. So that we can determine pricing conditions values
depending upon the range of the order quantity.
Ex: If you maintain condition record for PR00 for material one as a 100/- Rs. For 1 material, then we can maintain
scales for this material like below:
From Quantity Price
1 u2013 10 1000
11 u2013 20 999
21 u2013 30 998
31 u2013 40 997
Configuration settings:
Go to VK11
Maintain condition record for PR00
Select line item and click on scales icon on the application tool bar
Maintain scales and scale rates accordingly
Save and Exit
Go to VA01 and raise the sales order
Enter the order quantity according to the scale and see the scale effect
Regards,
Siva

Free goods issue

hi guys
I created sales order for free goods
free goods are inclusive.. but in order in line item for main item price takes where for free goods it is taking cost(vprs). why it is taking vprs into net value..
solutions please

Hi srinivas ,
u try this it my help full or you ,
spro- img-sd-bf- free goods-controle free goods pricing -controle pricing for free goods iteam catagory click on that ,
ypu will get pricing colum there you put 'B' (pricing for free goods 100 dicount) in statistcal colum put 'Y' .
I hope slove ur problem,
Regards,
venkataswamy.y

Free goods and order types

Hello,
1) If company is providing free goods, then will it be associated for order type or with pricing condition.
for e.g. On purchase of 100 qty. if 10% foods are free, then how is this associated.
2) Also if i want to provide free goods only for a particular customer group, lets say wholesale, then how will it be associated
with pricing conditions and order type.
Regards

Hi,
There are two cases:-
1.Ur company is providing free goods as a sample.
2.If some customer buys some quantity of product u provide some free goods with it.
1st Case:-
if u want goods to b send as a free sample then u can directly use TANN item category with doc type or .
2nd Case :
Free goods is something that the customer is given after he buys certain quantity of the product/material.
Free goods is a strategy to increase sales volume by luring the customer that if he buys 10 products one will be absolutely free.
Free Goods:Goods that are given as additional goods as part of the ordered goods are called as free goods.Here the unit of measure of free goods should be the same as standard goods.
Example:If you are are ordering 10 maggi sauce bottle you will be paying for only 8 bottles 2 is given as freegoods.
price will not be reflected in pricing or billing.this is inclusive freegoods
Exclusive freegoods.
wherein the freegoods are given as additional good to that of the ordered goods
Example:For 4 coffee vending machine 1 kg coffee powder isgive as free goods
Sample goods:these are the goods which are given as pert of the promotional activity to increase the sales.
here the customer is not paying money.
Free goods - In SAP there are two types Exclusive and Inclusive.
Exclusive - Buy 2 and get 1 free. This means you have to buy minimum 2 pieces then on that you will get 1 piece absolutely free.
Inclusive - Buy 2 get 1 free. In this case it means you are paying for only 1 item and the other item is absolutely free.
Configuration:
IMG - Sales & Distribution - Basic Functions - Free Goods - condition technique for free goods -
1. create the condition table(Take one field as customer group also if u want to provide free goods only for a particular customer group).
2. maintain access sequence and assign the condition table to the access sequence.
3. maintain condition type and assign the access sequence to the condition type.
4. maintain the procedure for free goods and assign the condition type to the free goods procedure.
5. Activate free goods determination. In this enter sales org., dis channel, division , docu pri pro, cust pri pro and the free goods procedure.
6. now go to VBN1 - create free goods determination. Select your condition type, key combination and enter. Here you enter sales org, dis channel, customer no., Valid from and Valid to dates. Then you first select whether it is exclusive or inclusive free goods determination. By default it will be inclusive if you click on exclusive it will become exclusive and on top it will display inclusive. Here you enter minimum quantity for free goods and from what order quantity the number of free goods. You can control the delivery also in the second last column(free goods delivery control).
Save the record. Go to VA01 create the sales order , enter the item and the minimum quantity for free goods .
Thanks & Regards,
Deepaks

Free Goods Determination Procedure

Can anyone simply tell me free goods determination procedure with an example?
Thanks

Hi,
Free goods is something that the customer is given after he buys certain quantity of the product/material.
Free goods is a strategy to increase sales volume by luring the customer that if he buys 10 products one will be absolutely free.
Free Goods:Goods that are given as additional goods as part of the ordered goods are called as free goods.Here the unit of measure of free goods should be the same as standard goods.
Example:If you are are ordering 10 maggi sauce bottle you will be paying for only 8 bottles 2 is given as freegoods.
price will not be reflected in pricing or billing.this is inclusive freegoods
Exclusive freegoods.
wherein the freegoods are given as additional good to that of the ordered goods
Example:For 4 coffee vending machine 1 kg coffee powder isgive as free goods
Sample goods:these are the goods which are given as pert of the promotional activity to increase the sales.
here the customer is not paying money.
Free goods - In SAP there are two types Exclusive and Inclusive.
Exclusive - Buy 2 and get 1 free. This means you have to buy minimum 2 pieces then on that you will get 1 piece absolutely free.
Inclusive - Buy 2 get 1 free. In this case it means you are paying for only 1 item and the other item is absolutely free.
Configuration:
IMG - Sales & Distribution - Basic Functions - Free Goods - condition technique for free goods -
1. create the condition table.
2. maintain access sequence and assign the condition table to the access sequence.
3. maintain condition type and assign the access sequence to the condition type.
4. maintain the procedure for free goods and assign the condition type to the free goods procedure.
5. Activate free goods determination. In this enter sales org., dis channel, division , docu pri pro, cust pri pro and the free goods procedure.
6. now go to VBN1 - create free goods determination. Select your condition type, key combination and enter. Here you enter sales org, dis channel, customer no., Valid from and Valid to dates. Then you first select whether it is exclusive or inclusive free goods determination. By default it will be inclusive if you click on exclusive it will become exclusive and on top it will display inclusive. Here you enter minimum quantity for free goods and from what order quantity the number of free goods. You can control the delivery also in the second last column(free goods delivery control).
Save the record. Go to VA01 create the sales order , enter the item and the minimum quantity for free goods to be applicable and observe the results.
Hope this will solve ur problem.
Plz reward Pts for useful answer.
Thx & regards,
Pankaj
Message was edited by:
Pankaj Mahajan

Inclusive Free Goods Determination ?

Hi,
   Can someone dend me the config. steps for inclusive free goods determination .
Regrds,
Binayak

dear B B
please gothough this
FREE GOODS:
     It can be configure in SAP by following two methods
A)     Manually          B)     Automatically
A) Manually:
By specifying higher level item category for a line item, we can determine free goods as a free of charge items during sale order processing.
B) Automatically:
System proposes free of goods items automatically in the sale order. In automatic free goods configuration system follows two methods
     a) Exclusive          b) Inclusive
Exclusive:
System configures free goods in exclusive option by free goods quantity is going to be excluded in order quantity ex: 10 items, line item is free, then system configures free goods as a ten plus one.
Inclusive:
System configures free goods in inclusive option by free goods quantity is going to be included in order quantity ex: for 10 items, one item is free, and then system configures free goods as Nine plus one
Note: In exclusive method, other items can be given as a free of charge items for order item
Configuration steps:
Inclusive:
SAP follows condition techniques to configure free goods automatically
Maintain pricing procedure:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  maintain pricing procedure
Choose standard pricing procedure NA0001-   free goods (SD) and click on copy as button and re-name it.
Condition type NA00; access sequence -- NA00
Step 2:     Activate free goods determination:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  Activate free goods determination
Go to new entries and specify our sales area, specify document PP- as A, customer PP as one and assign free goods procedure ex: NA0001.
Step 3:     control free goods pricing:
Control pricing for free goods item category
Choose item category TAN and specify the pricing as a X (pricing standard)
Choose item category TANN and specify the pricing as B (100% discount)
Step 4: Maintain condition type for 100 % discount:
     Choose condition type R100 (100% discount)
Step 5: Maintain pricing procedure for pricing:
Choose our PP from position button , select it and click on control data icon and include condition type R100 between steps of discounts & specify requirement = 5 and specify item no: 28 as a 100% discount in alternative formula for condition base value (AltcBV)
The requirement = 55 can be assign to condition type R100. If the user wants to look both
Revenues and sales deductions for the free item since the product that we are going to give as a free of charge item can be sold separately in same sales order the item category of free goods (TANN) has the pricing value as a B then the system calculate value of free goods as 100 % discounts . As we discussed above the same material (that is going to be given as a free of charge item). Some times the same item is going to be given as a normal item, then system calculate price for normal item, system item ( free of charge item ) so here to perform this calculation we have to assign requirement = 55 for condition type R100
Alternative Condition Base Value   = (100% discount)
Condition type R100 should be taken as 0 value the formula 28 calculate condition type R100 values as a 0
Set Transfer of cost to maintain (copy and control)
IMG  SD  Basic functions  Free goods  Control free goods pricing  Set transfer of cost to maintain (copy control)
Copy control is a concept by which the system copies the data from source document to target document.
Choose billing type as F2 and delivery document type LF,
Select it & click on item icon & choose item category TAN, click on details icon and
Click on display-change icon and choose item category TAN again select it & click on details icon and check cumulate cost.
Cumulate cost controls whether the cost value (VPRS) is to be copied from relevant for sub-item into main items sub-item cost are not relevant for billing. Save & exit
Maintain copying control:
IMG  SD  Basic functions  Free goods Control free goods pricing  Maintain copy control
We maintain copying control at item level category for free goods. In this field, we can control whether the free goods should also be transferred when we copy from one document to another document.
Choose source document type as   a QT & target document type as a OR &
Select it & click on item control button under dialogue structure
Choose AGN item category from position button & click on display or change button, again click on AGN & click on details icon and
Checks re-explode structure/ free goods (this indicator controls whether the free goods are coped from source document to target documents or determined again.)
Save and exit.
Maintain condition records for free goods:
Logistics  SD  Master data  Conditions  Free goodsVBN1 (create)
--Specify condition type NA00 & specify sales org. distribution channel, customer number, valid     periods and
--Chose option as inclusive.
--Specify the material number and
--Specify the minimum order quantity,
--Specify the quantity from which the free goods should be applied
--Specify the unit of measure and
--Specify free goods (are free goods) as a one.
Calculation procedure:
We can specify the routines for calculation procedure as a A-   (1- pro- rata- proportionate)
A) Pro-rata:
Ex: if the customer places order for 100 cases of material A, that customer receives 20 cases of same material is free. That is the business can say that buy 100 and get 20.
If customer orders for 162 cases, then the system automatically calculate 32 cases as a free of cost. 162 *20/100 = 32.
B- Unit of reference:
When customer order for 100 cases of material A , then the customer receives additional 20 cases of A as a free of goods items that is the business can sign that buy 100 and get 20 free, by inventing 20 free for every full of 100 cases.
If the customer places order for 162, then system automatically grants only 20 cases.
Formula:     100*20/100 = 20
C- Whole Units:
When customer places order for 100 cases of material of A, then customer receives additional 20 cases of material A that is business can say that buy 100 and get 20 free of charge items.
If customer order for increment of 100 that is ex: for 152 items, he get only 20 . If place the order 200 items, the he gets 40 that inclusive.
Condition records for exclusive:
--Specify the discount type NA001 &
--Click on exclusive option and
--specify the sales organization, distribution channel, customer number, validity periods and materials, minimum quantity, order quantity, unit of measure, and calculation procedure, free goods and
--Specify additional material free goods (if other goods are going to be given as free of charge item) save it and exit.
--Go to VA01 and raise the sales order for inclusive and exclusive and see the free goods effects
Condition Type: NRAB free goods; requiremet-55; AltCBV-29(only for inclusive)
When the customer doesnt want physically fee goods and the free goods price should be deducted from total price ten we can use condition type NRAB, which hides free goods line item in the sales document
Settings:
Pricing for inclusive free goods w/o item generation
--Choose our pricing procedure
-- Include condition type NRAB with requirement 59 and alternative formula for condition base value- 29 between discount condition steps.
--Go to VBN1, maintain condition record for free goods with Inclusive method and make sure that free goods category should be 3( inclusive rebate w/o item generation)
--save it
--Go to VA01, raise the sales order and check NRAB condition type effect.
Requirement 59:
We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases of product A then we receives 10 cases of product free.
If the user would not like the additional like items in the sales order for free goods rather than he discount of 10 cases be represented in the same line item as the other 90 cases. If the free goods discount should not applied as credit for return that doesnt make reference previous discounts.
Alt formula for condition base value-29:
The condition type NRAB is to be assigned with 29 formulas to support inclusive free goods agreements where the user would have to apply the discount to the order item rather than having a sub-item generated for the free quality. Ex: the customer having a free sub-item generated by the system to represent the 10 free cases. The user could like to have a discount applied to the 100 cases like item equal to the value of the 10 cases.
Note: Free goods can only be configuring on only document type C that means. We cant configure free goods inquiries in quotations.
rewards pls
siva

Free good in promotion

what is the process to give the free goods one product with other product.
Ex.pen with notebook
amit

Transaction *VBN1* for free goods condition record.
Free Goods determination:
FREE GOODS:
It can be configure in SAP by following two methods
A) Manually B) Automatically
A) Manually:
By specifying higher level item category for a line item, we can determine free goods as a free of charge items during sale order processing.
B) Automatically:
System proposes free of goods items automatically in the sale order. In automatic free goods configuration system follows two methods
a) Exclusive b) Inclusive
Exclusive:
System configures free goods in exclusive option by free goods quantity is going to be excluded in order quantity ex: 10 items, line item is free, then system configures free goods as a ten plus one.
Inclusive:
System configures free goods in inclusive option by free goods quantity is going to be included in order quantity ex: for 10 items, one item is free, and then system configures free goods as Nine plus one
Note: In exclusive method, other items can be given as a free of charge items for order item
Configuration steps:
Inclusive:
SAP follows condition techniques to configure free goods automatically
Maintain pricing procedure:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  maintain pricing procedure
Choose standard pricing procedure NA0001- free goods (SD) and click on copy as button and re-name it.
Condition type NA00; access sequence -- NA00
Step 2: Activate free goods determination:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  Activate free goods determination
Go to new entries and specify our sales area, specify document PP- as A, customer PP as one and assign free goods procedure ex: NA0001.
Step 3: control free goods pricing:
Control pricing for free goods item category
Choose item category TAN and specify the pricing as a X (pricing standard)
Choose item category TANN and specify the pricing as B (100% discount)
Step 4: Maintain condition type for 100 % discount:
Choose condition type R100 (100% discount)
Step 5: Maintain pricing procedure for pricing:
Choose our PP from position button , select it and click on control data icon and include condition type R100 between steps of discounts & specify requirement = 5 and specify item no: 28 as a 100% discount in alternative formula for condition base value (AltcBV)
The requirement = 55 can be assign to condition type R100. If the user wants to look both
Revenues and sales deductions for the free item since the product that we are going to give as a free of charge item can be sold separately in same sales order the item category of free goods (TANN) has the pricing value as a B then the system calculate value of free goods as 100 % discounts . As we discussed above the same material (that is going to be given as a free of charge item). Some times the same item is going to be given as a normal item, then system calculate price for normal item, system item ( free of charge item ) so here to perform this calculation we have to assign requirement = 55 for condition type R100
Alternative Condition Base Value = (100% discount)
Condition type R100 should be taken as 0 value the formula 28 calculate condition type R100 values as a 0
Set Transfer of cost to maintain (copy and control)
IMG  SD  Basic functions  Free goods  Control free goods pricing  Set transfer of cost to maintain (copy control)
Copy control is a concept by which the system copies the data from source document to target document.
Choose billing type as F2 and delivery document type LF,
Select it & click on item icon & choose item category TAN, click on details icon and
Click on display-change icon and choose item category TAN again select it & click on details icon and check cumulate cost.
Cumulate cost controls whether the cost value (VPRS) is to be copied from relevant for sub-item into main items sub-item cost are not relevant for billing. Save & exit
Maintain copying control:
IMG  SD  Basic functions  Free goods Control free goods pricing  Maintain copy control
We maintain copying control at item level category for free goods. In this field, we can control whether the free goods should also be transferred when we copy from one document to another document.
Choose source document type as a QT & target document type as a OR &
Select it & click on item control button under dialogue structure
Choose AGN item category from position button & click on display or change button, again click on AGN & click on details icon and
Checks re-explode structure/ free goods (this indicator controls whether the free goods are coped from source document to target documents or determined again.)
Save and exit.
Maintain condition records for free goods:
Logistics  SD  Master data  Conditions  Free goodsVBN1 (create)
--Specify condition type NA00 & specify sales org. distribution channel, customer number, valid periods and
--Chose option as inclusive.
--Specify the material number and
--Specify the minimum order quantity,
--Specify the quantity from which the free goods should be applied
--Specify the unit of measure and
--Specify free goods (are free goods) as a one.
Calculation procedure:
We can specify the routines for calculation procedure as a A- (1- pro- rata- proportionate)
A) Pro-rata:
Ex: if the customer places order for 100 cases of material A, that customer receives 20 cases of same material is free. That is the business can say that buy 100 and get 20.
If customer orders for 162 cases, then the system automatically calculate 32 cases as a free of cost. 162 *20/100 = 32.
B- Unit of reference:
When customer order for 100 cases of material A , then the customer receives additional 20 cases of A as a free of goods items that is the business can sign that buy 100 and get 20 free, by inventing 20 free for every full of 100 cases.
If the customer places order for 162, then system automatically grants only 20 cases.
Formula: 100*20/100 = 20
C- Whole Units:
When customer places order for 100 cases of material of A, then customer receives additional 20 cases of material A that is business can say that buy 100 and get 20 free of charge items.
If customer order for increment of 100 that is ex: for 152 items, he get only 20 . If place the order 200 items, the he gets 40 that inclusive.
Condition records for exclusive:
--Specify the discount type NA001 &
--Click on exclusive option and
--specify the sales organization, distribution channel, customer number, validity periods and materials, minimum quantity, order quantity, unit of measure, and calculation procedure, free goods and
--Specify additional material free goods (if other goods are going to be given as free of charge item) save it and exit.
--Go to VA01 and raise the sales order for inclusive and exclusive and see the free goods effects
Condition Type: NRAB free goods; requiremet-55; AltCBV-29(only for inclusive)
When the customer doesnt want physically fee goods and the free goods price should be deducted from total price ten we can use condition type NRAB, which hides free goods line item in the sales document
Settings:
Pricing for inclusive free goods w/o item generation
--Choose our pricing procedure
Include condition type NRAB with requirement 59 and alternative formula for condition base value- 29 between discount condition steps.
--Go to VBN1, maintain condition record for free goods with Inclusive method and make sure that free goods category should be 3( inclusive rebate w/o item generation)
--save it
--Go to VA01, raise the sales order and check NRAB condition type effect.
Requirement 59:
We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases of product A then we receives 10 cases of product free.
If the user would not like the additional like items in the sales order for free goods rather than he discount of 10 cases be represented in the same line item as the other 90 cases. If the free goods discount should not applied as credit for return that doesnt make reference previous discounts.
Alt formula for condition base value-29:
The condition type NRAB is to be assigned with 29 formulas to support inclusive free goods agreements where the user would have to apply the discount to the order item rather than having a sub-item generated for the free quality. Ex: the customer having a free sub-item generated by the system to represent the 10 free cases. The user could like to have a discount applied to the 100 cases like item equal to the value of the 10 cases.
Note: Free goods can only be configuring on only document type C that means. We cant configure free goods inquiries in quotations.
rewards if useful.

Free Goods & Sample

Hi Gurus,
Plase letme know what is the difference between Free good customization and Sample Customization....

hi Ravi Kumar,
Free goods - In SAP there are two types Exclusive and Inclusive.
Exclusive - Buy 2 and get 1 free. This means you have to buy minimum 2 pieces then on that you will get 1 piece absolutely free.
Inclusive - Buy 2 get 1 free. In this case it means you are paying for only 1 item and the other item is absolutely free.
Configuration:
IMG - Sales & Distribution - Basic Functions - Free Goods - condition technique for free goods -
1. create the condition table.
2. maintain access sequence and assign the condition table to the access sequence.
3. maintain condition type and assign the access sequence to the condition type.
4. maintain the procedure for free goods and assign the condition type to the free goods procedure.
5. Activate free goods determination. In this enter sales org., dis channel, division , docu pri pro, cust pri pro and the free goods procedure.
6. now go to VBN1 - create free goods determination. Select your condition type, key combination and enter. Here you enter sales org, dis channel, customer no., Valid from and Valid to dates. Then you first select whether it is exclusive or inclusive free goods determination. By default it will be inclusive if you click on exclusive it will become exclusive and on top it will display inclusive. Here you enter minimum quantity for free goods and from what order quantity the number of free goods. You can control the delivery also in the second last column(free goods delivery control).
Save the record. Go to VA01 create the sales order , enter the item and the minimum quantity for free goods to be applicable and observe the results.
SAMPLE -
sample is normally given to a new customer. We give customer a sample of our finished item, the customer will use it at his/her site and if approved then he will start ordering for the finished item. You give samples to existing customers also when you come up with a new product and you want to sell it to your old customer.
For sample it is like free of charge delivery. Sales document type is FD. The item category for FD item is KLN and it is not relevant for pricing. so when you create the sales order in VA01 you will not get any price.
I hope I have answered your query. Please reward valuable points if solution helps.
Regards,
Allabaqsh G. Patil

Cost of free goods in header

dear all
i have configured free goods,in the order the cost is coming for free goods at item level and it is not adding to the header cost total.
for eg:i have 2 items and 1 free item.costs r 300,400,500 respectively.
in the header it is showing only 700 as cost.
i observed the inventory doc is posting correctly with 1200(which includes free goods cost).
can anybody tell weather it should add up or not and how it can be done??
thanks
reddy

Dear Yugandhar
Check
SPRO->Sales and Distribution->Basic Functions->Free Goods->Control Free Goods Pricing->
Control Pricing For Free Goods Item Category you will find statistical value
or in VOV7 below pricing you find statistical value
Statistical values
Indicates whether the system takes the value of an item into account
    when it determines the total value of a document.
There are three options
      System will copy item to header totals
X     No cumulation - Values cannot be used statistically
Y     No cumulation - Values can be used statistically
Check if it is initial for your item category
Standard for TANN is initial and pricing is B     Pricing for free goods (100% discount)
Do give your feedback
Regards
Jitesh

Free Goods being delivered when shouldn't be!!

Hi All
I have a problem and I need some help. To explain it easier I have outline the scenario below:
Free goods (discount type NA00) has been set up for customer Y, sales org 1000 and distribution chanel 12 though VBN1. It is an exclusive free good so that when item A is purchased they receive item B free. The "Free goods delivery control" has been set to B - Delivery only when main item is fully delivered.
Item A currently does not have stock and stock will not arrive until 30 September while item B already has stock in the warehouse.
Even though we have the setting B indicated for the delivery control, a delivery document can still be created. When creating the delivery an information (green) message indicating "Free goods group not complete" appears prior to creation (VL261) but you can still create the delivery for the free goods item only (item B).
I have tried indicating item A as complete delivery in the sales order but the same happens. Also I am unable to create a delivery group for the item in the sales order so that ones out as well.
Does anyone know a way that we can stop this from happening so that item A and B are ALLWAYS delivered at the same time or item B can only be delivered after item A has been delivered.
Is there a way that we can change the message from an information (green) message to an error (red) message?
The customer does not want to customise their system through ABAP which will be maintained by SAP in later releases. They want to do the least amount of ABAP and stick with configuration where possible.
Cheers
Tammy

Hi,
See as your stock is not available for the item A then give the delivery block to item B.
So that it will be not open for the delivery. This is the one way which you can do it.
Now your stock for item A will available from 30sept but i donu2019t know whether this situation will happen other month also or not.
So other this you can do is change the material availability date of the item B also.
So if you change that setting and make is similar to your item A then also you can solve your problem.
Like giving the pick pack time or loading time to the item B which will increase the material availability date of your item.
But for one time issue you should use delivery block.
And if its occurring every month then change the availability date of your item B.
Regards
Raj.

Free Goods price control

Similar Messages

Maybe you are looking for