Funds Management-PO field status

Hi,
When Funds Managemnet is Active so while creating Purchase order without account assignment K,in account assignment tab Fund center and commitment item fields used to appear so my question is how make these fields as in display.
Another issues is that my client want cost center field should appear in same screen without account assignmnet K.
Give some solution for the above.
Deepa

hi
Check in the following path where you can change the field status for purchasing documents
SPRO - MATERIAL MANAGEMENT - PURCHASING - ACCOUNT ASSIGNMENT - MAINTAIN ACCOUNT ASSIGNMENT CATERGORIES.
thanks and regards

Similar Messages

  • Status of PO becomes F in fund management

    Hi,
    recently we have upgrade SAP from ECC6 to EHP4 and found some of the PO's Status becomes F in fund management, so we are not able to make service entry sheet and payment as system asking for further budget though actually POs value has not reduced fully.
    Plz help to remove the status F from FM so that it can be able to make payment.
    P K Sahoo

    Hi, try to reconstract PO(I don't remember tcode, but you can find it in spro like M*4N)

  • Travel Management & Funds Management integration

    Hello Experts,
    During creation of a travel request & when I am entering amount in "Estimated Costs" field, I am getting an error message as "Error creating commitment: Trip status has been set to 'open'. Message no. PTRA_WEB_INTERFACE098". This is due to Funds Management activation by the FICO team. My client requires budget check in Travel Management.
    From my side I have created an expense type with details like:-
    Short name: for example, Estimated Costs
    ○  Travel Expense Category: Other
    ○  Amounts are: Estimated Costs, No Reimbursement to Employee
    Do I need to maintain symbolic & G/L for the same? Is there any other config I am missing.
    Please help to solve the issue.
    Regards,
    Daniel

    Can you check for config in V_T706B1  for Estimated Costs  with name should be  ESTC
    you need to change it  ESTC.
    If you have activated the integration to funds management, the system tries to create a commitment for the entered estimated cost. For this it is necessary, as the error message says, to create an expense type for the estimated cost in V_T706B1 with the use 'Estimated Cost'.
    This expense type is then inserted in the trip and later on, when your create the expense report, you are forced to delete this
    expense type again.
    If you have the funds management active, you need to go to maintainance view V_T706B1 and create an expense type for which you choose out of the 'special use' drop down box the value 'extimated cost, no reimbursement'.
    This was new functionality with ERP2005 but this is unusual as almost all PTRA_WEB_INTERFACE174 or error messages as you see are the result of incorrect definition of estimated cost in V_T706B1 - is there an entry for this in V_T706B4 by any chance that would cause the inconsistency?
    Hope this could help!
    Thanks

  • Funds Management as a budget source for Grants Management

    Hi:
    I have grant type whose budget source has been set as Funds Management and transfer to FM check box is also on. Now i have a fund center and commitment item which have been assigned to sponsored program and sponsored class master data respectively. I have created a grant with reference to these Sponsored program and sponsored class in initial draft phase. Now i want to post budget in FM and then automatically transfer it to GM as soon grant is awarded. I am following link http://help.sap.com/saphelp_erp60_sp/helpdata/en/3e/1b7e3cda04f678e10000000a11405a/content.htm .
    In FM i have posted a  budget (but did not release it) against an external fund, also against commitment items and fund centers which have been assigned to SC & SP respectively. Grant field is set as non relevant grant.
    Now my question is at what point in time budget will be will be updated in Grants management , How will the transfer from FM to GM happen ? Please guide me
    Regards

    Hi Shyamal:
    Please note that a DUMMY grant has been created in customizing Define "Not-relevant grant". I am following the process e.g
    1..1 have 3 Million Research & education budget for year 2012-13  and for a varying sponsored programs and a sponsored class linked with fund center and commitment items respectively
    2..Of these 3 Million i am expecting that i will receive 1 Million as grant .
    3..In FMBB i ENTER 3 Million budget against DUMMY Grant along with combination of fund,FC & CI.
    4.As soon an MOU is signed with Grantor and he releases amount 0.6 Million  for budget i create a Grant master ans set its status to award ..Grant number generated is XYZ
    5.Now i n FMBB, i try to release budget again this grant number but system is throwing error that budget amount is not sufficient for release for combination XYZ/FC/CI/Fund , system is true in saying so because earlier budget was entered and posted for DUMMY Grant and now i am trying to release it for Grant XYZ. System does not let me directly ENTER budget in FMBB against Grant XYZ and throws error "Grant XYZ can not be used to enter budget in FM".
    Please note that in Grant type budget source has been explicitly defined as "Funds Management"
    Regards

  • Funds Management cut over of Open PR and PO

    Hi,
    In case of cutover, we are using following link to update FM account assignment in open PR/PO.
    SPRO>Funds Management Government>Actual and Commitment Update/Integration>Internal Data Transfer to Funds Management>Supplementary Account Assignment-->Select Documents
    and
    SPRO>Funds Management Government>Actual and Commitment Update/Integration>Internal Data Transfer to Funds Management>Supplementary Account Assignment-->Convert Worklist
    1) But in this case, for open PO of which GR is not done FMRP_RW_BUDCON report is not updated after doing above mentioned process. when I make GR, commitment get updated in FMRP_RW_BUDCON report. This does not show actual status of budget consumption as budget consumption is shown at the time of GR only.
    2) If GR is already done for PO and after doing above mentioned process, if GR get reversed then Negetive commitment shows in FMRP_RW_BUDCON report and after deletion of that respected PO, commitment of PO gets zero. But negetive GR commitment remains open which leads to wrong status of budget consumption. e.g. GR of Rs 5000 is reversed. Then report shows two documents as -5000 for GR reversed and 5000 for PO commitment getting open. IF I reversed this PO then PO commitment of 5000 become zero. but GR reversing amount -5000 still remains open. So it shows less consumption of budget by Rs.5000.
    Do I am missing any process. Suggest.

    Hi,
    Firstly, after you convert the open commitments, you'll need to run FMAVCREINIT to reconstruct AVC. FMRP_RW_BUDCON will then reflect the converted commitments.
    Secondly, based on your posting, it seems that you do not want PO commitments (VT 51) to be counted as budget consumption. You can achieve this in the ledger 9H configuration:
    Public sector management > Funds management government > BCS > Availability control > Settings for availability control ledger > Define filter settings for commitment/actual values. You will want to exclude both value type 50 and 51 from ledger 9H. After you change the setting, you will need to run FMAVCREINIT again.
    Hope this helps.
    Regards,
    Ming

  • Blank Screen in Import Manager under Import Status Tab

    Hi Experts,
    Problem: Blank Screen in Import Manager under Import Status Tab.
    I have opened import manager with source file(excel & xml) and i have also did mapping from source fields to destination fields and also seleted display/key field in match records tab and refreshed it. when I select Import Status tab. I am not able to see any details/status regarding the map which i have done. when i click on excute button.. the source file is sucessfully import and pop up dailogue box shown. I have also checked in Data Manager and data was visible.
    But.. at Import Status Tab in import manager.. i am not able to see any details.. it is just showing as white blank screen.
    If any one know the solution could you please help me out.
    Thanks
    Bharat

    Hi Bharat,
    As per New MDM Release we have to Install MDM 7.1 servers on 64 bit machine and GUI's can be installed on 32 machine, whreas if you are using MDM 5.5 Version then 32 bit machine can be used.
    Now as you said that you have sucessfully imported the excel file and then you have mapped the filed after that without any error you got the ready to import screen to import the data into MDM database then processwise there is no problem as far as screens are concern i will suggest you please un-install MDM Import Manager GUI and then again install it, your problem would be solved.
    If it doesnt please do let us know.
    Thanks and Regards
    Praful.

  • MIRO: Field Status control per GL master for non-goods receipt invoices

    When posting incoming invoices in FI using FB60, the combination of GL account and CO account assignment are validated and checked against Field Status Group (FSTAG).  Such controls are also in place in MM for purchase requisition (ME51N) and purchase order (ME21N), in addition to checking the account assignment category.
    But there is problem in posting non-goods receipt (2-way match) invoices in MIRO u2013 system checks GL account and account assignment object according to account assignment category in PO, but not the field status based on GL account.  GL account and acct assignment object are proposed by purchase order.  However they can be overwritten by users with no validation, often resulting in incorrect posting.  Wonder how other manage this issues in their companies.
    I would like and need help in implementing a validation or user exit in MIRO which will check GL account against its CO account assignment for cost centre, order or WBS, based on the field status group of the GL master.
    Q1,  Where is the user-exit or validation maintained that checks the field status group in FB60 and ME21N (not in OB28 or GGB0)?
    Q2.  If purchase requisition and purchase order  check field status group based on GL account, how can we make such controls available in MIRO? 
    Q3.  What is the transaction code for developing a validation for MIRO?  (MM MIRO not appeared in the application area of GGB0.)
    Appreciated any help

    Hi
    Th evalidation should be at the source is the Purchase Order. I beleive it is standard SAP Config to put the validation there. So once the PO has been created with the correct account assignments the GR and IR will be correct.

  • Field status of a specific field in different FSGs

    Hi experts
    This refers to filed stutus of a specific field in PO item, how it is set (Mandatory/Optiona/Display) in different field status groups.
    Is this can be read from any table. I would like to see which FSGs set with Optiona/Mandatory for the given field (ex: storage location)
    thanks
    ramSiva

    Kindly check in the below configuration
    "Materials Management>Purchasing>Purchase Order-->Define Screen Layout at Document Level",
    Regards
    Irfan

  • Open item Management Hidden Field

    Dear Friends:
    When creating an GL Account, I am getting the following Error:
    Field 'Open item Management' contains an entry, although it is hidden.You cannot Save.
    How to overcome the problem?Please advise.
    Regards
    MSReddy

    Hi Sridhar,
    Use T.Code : OBD4 ,Select your Account grouop related to your chart of accounts, select the field status . Change the "Open item Management" from suppress to optional.
    I hope this will definitely solve the problem.
    If the problem is solved , please assign points.
    Thanks
    D.K.Lakshmi Narayana

  • Special settings for funds management in 4.6C?

    Hi experts,
    Our client wants to implement funds management with 4.6C and plans to upgrate to ECC6.0 in the future. What points should be recoginzed when configuring FM in view of upgrade?
    The company code currency is different with the FM area currency.
    One example is there is a field "Currency integration" in ECC6.0 in OFUP while 4.6C doesn't have such a field. should alternative currency be set up in 4.6C?
    Any other settings needed?
    Thanks,
    Eunice

    Hi Noobie,
    You can achieve same scenario using standard configuraition.
    Use a different campaign type all together..
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • Asset-fund management

    Hi,
    I want to have fund management control in asset accounting. But in integration in fm i am not getting any setting for asset filed as it is for order field. How i can do this.
    Thanks

    Hi,
    Your question is not giving full details of your requirement. For asset you can do following
    1. Create commitment item and link it to asset accounts in FMDERIVE.
    2. You can activate Asset transactions that can be relevant for FM control.
    3. You can Activate Account Assignment Objects for asset acoounting thru path IMG> Financial Accounting (New)> Asset Accounting> Integration with the General Ledger> Additional Account Assignment Objects> Activate Account Assignment Objects.
    I hope this will help you.
    Warm Regards

  • Downloading/Exporting Field Statuses

    First, I know essentially nothing about SAP, so I hope this is the right area. I am an intern who has been tasked with taking SAP data, and automating some processes with it using Access. No big deal at first, they provided us with a table download script and I did a few no problem.
    Now however, I need to check that a bunch of customer account groups have (in their company code data) the reconciliation field set to required. This is how they told us to navigate to the field:
    In customization, go to SPRO->Financial Accounting->Account Receivable and Account Payable->Customer Accounts->Master data->Preparations for creating master data->Define account groups with screen layouts, or run transaction OBD2.
    Click on the u201DDetailsu201D button (or press F2). Click on the field status u201DCompany code data.u201D Click on the select group u201DAccount management.u201D  Review the field status for u201DReconciliation accountu201D.
    For anything else, I would just download a table and do the check, but these are contained in a structure, which (via some googling) does not appear to be downloadable. Is there any way to get this data into access?
    Edit - found an answer, but couldn't figure out how to delete this post. Mods go ahead if you want.
    Edited by: James.Field on Jun 2, 2011 1:40 PM

    I totally agree with rnm1978, you shouldn't use OBIEE as an extraction tool. Get your users to define extractly what questions they need answered and create those reports in OBIEE, not on Excel.
    Havign said that if you do use OBIEE as an extraction tool you should know that the 56K limitation it's an Excel problem, not OBIEE. If you use the Download Data option in OBIEE you can hundreds of thousands of rows, depending on what have you set as the maximum number of rows your BI Server allows. and if you use Excel 2007 to open this data file it can load up over 1m rows (1048576 to be precise).

  • Fund Management- Business place

    Dear Team,
    In fund management, i am creating request of payment Tcode F871, fi document is created in background and get parked, such request is released Tcode F874 and ultimately posted Tcode 870.when posted FI document which was parked while request creation gets posted.
    My question is about the field " Business place" and " Section Code" which is neither available at the time of creation of request nor available at the time of posting of request.
    SInce Business place field ( BUPLA) is blanck, TDS certificate can not be generated.
    Please advice how to get " Business place" field in F871/ F870
    Thanks,
    Nilesh Pitale.

    Hi,
    maybe this document will help you more:
    http://perlhosting.net/download/968192356.html
    SAP78V

  • Adding an addition feilds n the field status group

    Hi all
    I want to know, how to add a new field in the in the field status.
    e.g.
    in the standard  feild status group G001 we have fields namely general data, material managenment,addition account assignment,ect
    In additional account assignment i want to add some new feilds like Charges,dimension,etc. apart from the standard fields like Fund Center,Commitment item,Cost center
    But when i checked,their is no provission for adding the new fields.
    Can any one help out in this regard.......
    Its a urgent requirment ............
    Thnx
    Regards
    Praeen

    Hi
    You have to extend the coding block of the BSEG table with the required fields.
    You can then use there fields in the field status
    Regards
    Ole

  • Issue when activing Global Funds Management Function(PSM-FM)

    Hi Peers,
    I tried to active Global Funds Management Function(PSM-FM) in IMG. A message "Aktivierung des Haushaltsmanagements ist nicht erlaubt" poped up. And I also only have read access to “Active/Deactive Funds Management” but SU53 shows authorization check is ok.
    What should I do for next? Thanks
    Regards,
    Eunice

    Hi,
    I am facing the same issue regarding "Read Access Only" to the activation of Funds Management under Actual and Commitment Update/Integration.
    I've checked the component activation and found that
    1) ES-PS is activated under SPRO
    2) IS-PS is checked under BF11, but the checkbox status is greyed, so that it's impossible to change it.
    I've tried to delete the IS-PS entry and re-insert it...the action was successful but the issue remained...
    Any clues?
    Thanks

Maybe you are looking for