Future price not deleted after cost run

Hi all,
If a material master has the future price maintained on the Accounting 1 view, then it is picked up in the next cost estimate that is created.
Costing strategy is Future price, Price from PIR, Standard cost.
However, I have been told that once the Cost estimate has been created, the future price is deleted from the material master. In this way the cost accountant can delay the release of a new standard price to avoid large re-valuations.
The future price is not being deleted following our cost run, can anyone advise on this?
Thanks
Phil.

Future prices will not delete when a cost estimate is released.  If the Future Price is ACTIVATED (no cost estimate involved) then the Future price field will clear because it is "rolled forward"  in the same manner that a Marked cost estimate is rolled forward to the Released Cost Estimate, leaving the field Future Planned Price on Costing 2 blank.
Be very careful with CKME - it will activate future prices and release future planned cost estimates, but it does not stop and show you what is about to be activated or released and the financial impact.   We wrote a custom transaction that had CKME report what it is going to do, so we have a chance to review the infomation.

Similar Messages

  • TPS file is not deleted after FrameMaker creates PDFs via Acrobat 8

    Using FrameMaker 7.2 build 158, and Adobe Acrobat 8, when creating PDF files, the temporary PostScript file (*.tps), which is created before the final PDF, is not deleted after the creation of the PDF is complete.
    This is a big deal for us because we are using a tool which hooks into the PDF-creation of FrameMaker/Distiller, and is reliant on this TPS file being deleted.
    Is this a known bug? Does Adobe know about this? Do any other users have workarounds for this?

    Thomas,
    FWIW, speaking from experience with the Save As route, I've seen
    random "phunnies" in the final PDFs (such as the missing fonts
    issues), a bigger .tps file than the .ps file generated from directly
    printing to file, slower throughput in both the intermediate
    postscript file creation and actual distilling (probably tied in to
    the larger .tps file) and other differences from what the joboptions
    should have been.
    There should not have been any differences in the file sizes being
    created if the same printer instance/configuration was actually being
    used. I also see this on some automated runs with Miramo. It's not
    consistent either - sometimes it works fine and then the next run, the
    process is considerably slower and there are dropouts in the PDFs.
    So far, manually printing to a ps file and distilling always seems to
    work without any issues.
    Your mileage may vary.
    Arnis

  • How do I delete a costing run?

    Hi,
    I have a costing run which is already released. How do I delete it? I have deleted the price update from Material Master using CKR1. I want to totally delete the costing run. Please advise. Thanks.
    Regards,
    Sakthy

    Hi Sakthy,
    Please check the online help document for more information.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/7e/cb841c43a311d189ee0000e81ddfac/content.htm
    CK44;
    Choose Accounting->Controlling->Product Cost Controlling->Product Cost Planning->Environment->Costing Run->Delete Costing Run. The Delete Costing Run screen will appear.
    1. Enter the name and date of the costing run. Data is displayed on the costing run that is to be deleted.
    2. Push trash can button
    best regards, Takashi

  • Pass on lot size" function not supported in costing runs

    hi when i am doing cost estimate through ck40n i am getting following error.
    Pass on lot size" function not supported in costing runs
    Message no. CK463
    Diagnosis
    You have selected costing variant PPC1 for the costing run. The Pass on lot size indicator is set in this costing variant. Costing variants in which this indicator is set cannot be used by the costing run.
    System Response
    The costing run is not created.
    Procedure
    You have the following options:
    Reset the Pass on lot size indicator in costing variant PPC1 so that the lot size is not passed on.
    Use a different costing variant in which the Pass on lot size indicator is not set.
    if any one had found any same king of error please help me in fix it.
    thanks
    kareem

    Probably this might be the cause
    Sales order by Costing
    Check out the below
    Pass On Lot Size
    Definition
    If this indicator is selected, the system determines the costing lot size using the lot size of the highest material in the BOM and the input quantities of the components.
    Use
    1) Do not pass on lot size
    If this indicator is not selected, the materials further down in the structure are costed in accordance with the lot size in the costing view of the material master record. When the materials in the next-highest costing level are costed, the costing results of the semifinished materials are converted to the lot size of the finished material to calculate the material costs for the finished product.
    2) Pass on lot size only with individual requirement
    In the MRP view of the material master record, you can specify that a material is planned as an individual requirement. If such a material is added to another material, costing uses the lot size of the highest material.
    3) Always pass on lot size
    Here, the costs for all the materials in a multi-level BOM are calculated using the costing lot size of the highest material. This function is used principally in sales order costing.
    If you are costing sales orders using product costing for a material with a multilevel BOM that is produced in-house, choose 2) or 3) . For those individual requirements materials, from a business management point of view it is recommended that the order lot size be used when costing the material components going into the finished product. On the other hand, materials subject to collective requirements are generally costed using the costing lot size in the material master record.
    Thanks

  • Import sim contacts flashing,could not delete messages,battery running down,overheating

    import sim was flashing,could not delete messages,battery running down,overheating
      answer turned on data roaming briefly   took out sim card and replaced   seems to be working ok

    7. WLAN/VoIP/SIP auto-connect (last question ;-)
    there may be some other way but this is how i did it:
    on standby screen where WLAN informaion is, click and select disable "net phone" (or name of you VIOP setting).  Accordingly when you want to use an internet tel you select "eneble".
    /discussions/board/message?board.id=communicators&thread.id=54688

  • Safari on my iPad. I have an original iPad and since updating to the latest iOS safari forces me to restart the iPad about two to three times a day. Three problems: 1. It just blacks out. 2. The reading list does not delete after the story is read. 3. Ema

    Since updating to latest iOS safari fails several times a day.
    1. Just quits.
    2. The items on the reading list will not delete after visited.
    3. The screens goes grey when I go to email a reference.
    Is the a solution other the restarting the iPad or is this something apple ought to fix?

    See if the following help.
    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Ke24 cost of goods sold field reporting future price not actual cost.

    Hi Guru's
    KE24 line item report is showing a future price in the costs of goods sold field.  Can this report be configured to show the actual costs of goods sold from the relevant accounting document.
    thanks

    Thanks Mr Ajay for understanding my question.
    As I told mentioned in my initial question that  I have created the GL:500000 (COGS) when CRM/SD issues the stock for delivery.
    What my FI done is that the same GL (500000) is assigned both in GBB-VAX and GBB-VAY as per the client requirement.
    Now suggest me as how to come out from this situation?
    If I need to do Validation ,request you to give your guidance as how to do it as I never done.
    Thnaks in advance.
    Su

  • Price update step in Costing run to other prices probelm - Very urgent ...

    Hi All,
    Can anyone tell me why does it updates only 1100 materials prices to commercial price though costing has been carried for 7900 materials? I have selected the price to be updated to commercial price 1 and as said above only 1100 only are shown under materials and 6800 materials are shown as still open in my costing run
    I have looked into it, it appears to me that its becos of materials without quantity structure, their prices are not getting update to other prices
    If anyone has any clue or infact a solution for this issue, please do help me
    Thanks in advance
    Kumar

    Hi Suraj,
    thanks a lot for ur quick reply. I think ur reply has answered most of my question, however in my costing run I have selected all the materials in my plant, meaning the materials which are purchased (no quantity structure/raw materials)also. So from ur reply I understand that for the raw materials or materials with no qnty structure the prices are not updated in the material master to other prices but, if it is a std cost estimate, mark, release process then it updates the future, current stnd prices right?
    Please confirm me on that, bcos I have used a different costing variant from a regular one that I use for std cost est. I have defined the variant with costing type "ad hoc for commercial price" and with update as "other than std price". I want to make sure is the problem discussed above is due to my costing variant customization or is it bcos in price update function materials with no qnty sturcture are not updated in material master?
    Your help is highly appreciated
    Regards,
    Kumar

  • Production Order reservation(ETO) not deleting after PGI (VL01N)

    Hi All,
    Greetings!!!
    A query, regarding ETO (Project system)
    ETO scenario, For production, reservation will be create through WBS element. After production , If I do delivery and PGI,  production order reservation is not deleting.
    Same material If I do delivery(LP) through CNS0, then order reservation is going to delete after PGI. But Sales order price is not copying to Billing If I follow this process.
    Is there any copy controls to flow the sales price to billing when delivery happens through CNS0. If not
    Which requirement class and movement type I need to determine in Sales order.
    Please do needful.
    Very High,
    Thanks,
    Prasad.

    This is standard SAP
    SAP process is to deliver project stock using project delivery , where in PGI happens against the reservation created & deletes RESERVATION.
    wherein if you do PGI for order ( sale order or prod order ) , it happens against project stock ( spe stk Q - 281 movement )  i.e., against WBS element
    I faced the same for sale order delivery of project stock .
    we are selecting FINAL Issue indicator through user exit which triggers when PGI is clicked
    This will delete RESERVATION from stock overview
    hope this helps ...Let me know if you found any alternative

  • Reg  Order reservation not deleting after PGI (VL01N)

    Hi All,
    ETO scenario, For production, reservation will be create through WBS element. After production , If I do delivery and PGI,  production order reservation is not deleting.
    Same material If I do delivery(LP) through CNS0, then order reservation is going to delete after PGI. But Sales order price is not copying to Billing If I follow this process.
    Is there any copy controls to flow the sales price to billing when delivery happens through CNS0. If not
    Which requirement class and movement type I need to determine in Sales order.
    With regards,
    Prasad.
    Edited by: SDGURU on Feb 9, 2011 10:50 AM
    Edited by: SDGURU on Feb 9, 2011 10:51 AM
    Edited by: SDGURU on Feb 9, 2011 11:14 AM

    Hi All,
    Please do need full.
    Regards,
    Prasad.

  • Additive cost not picking in costing run

    Hi!
    I am using additive costing , while doing costing run system is picking up additive cost for header material, that when BOM exploding, but not picking additive cost for componenets.
    for us componets are also having price control "S", standard cost esimate has to run. as per valuation variant planned price will be consider for the standard price for components, where there is no BOM
    any suggestions on this?
    why additve cost is not picking for materials where there is no BOM explosion.
    regs,
    ramesh

    Hi
    If child is not having BOM - Then Maintain a Special Proc Key 20 in the Costing view of Mat Master and whatever price you maintain in the Planned Price Fields -can be released as a cost estimate
    In that case, If you maintain additive cost, it does not make sense.. You can straight away maintain the requird price in planned price
    br, Ajay M

  • Delete STD cost run....

    HI Experts,
    I want to delete the Curent std cost estimatoin, i have tried ckr1 and ck44, in ck44 i have deleted costing run....but the std cost still in the material master,....i have trires in ckr1 also but not deleted costing run.....any authorisation issues need to check or......
    PLs guide how can i delete the std cost of current period...
    Thanks
    Chandu
    Edited by: G.C.S.Reddy on Dec 25, 2011 12:32 PM

    You can delete Material cost estimates also at CKR1after deleting Costing Runs at CK44
    First delete Costing run at Ck44. Then delete Material cost estimates at CKR1
    Check below links to get an idea.
    For Deleting Costing Runs
    http://help.sap.com/saphelp_470/helpdata/en/7e/cb841c43a311d189ee0000e81ddfac/content.htm
    For Deleting Material Cost Estimates
    http://help.sap.com/saphelp_470/helpdata/en/7e/cb840f43a311d189ee0000e81ddfac/content.htm
    Srinivas

  • Schedule lines are not coming after MRP run for HALB material

    Dear All,
    I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
    Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
    Pls let me know if I am missing something and guide me further on this.
    Thanks & Regards
    Kundan Kumar

    Dear All,
    I am closing this thread. As the vendor mentioned in scheduling agreement is not a subcontracting vendor. Its a individual vendor.
    Thanks for all the reply.
    Thanks & Regards'
    Kundan Kumar

  • Purchase Order Net Price not editable after GR/IR

    Hi Friends!
    I am facing a problem that, I want the price of the Purchase Order document should not be changed after the GR or IR is posted for this document.
    I have checked that making the net price field as display or M/06 is not the solution of the above mentioned problem.
    Can anyone help?

    Hi,
    If you want the price not to be changeable, set the tolerances in the IMG menu:
    MM -> PUR -> PO -> Set tolerance limits.
    Cheers

  • RE : IDOCS did not Generate after payment run

    I have a unique issue.  After APP run (ACH) all accounting entries & payment document created corectly. However idoc's for 3 vendors did not generated. There is no issue with configuration as this is not a new vendor and every month payments made off automatically. Vendor complained non receipt of payment after 10 days  and I could not find the log for that day. Could anyone please give some hints what could have gone wrong if anyone is expereinced this issue. As I said earlier all config and set up are correct and infact after that one payment is made to that vendor.
    Thanks
    Ivan

    Hi,
    Once APP run completed, Vendor open items will be cleared.
    You have to create IDOC using WE19.
    Run the Idoc using AL11
    may be your problem will be solved
    Thanks
    Chandra

Maybe you are looking for