FYI Notification using wf_engine.abort_process

Hi everyone,
For a work item to be considered eligible for purging, all activities must be complete. This includes FYI notifications, which must be closed. So once i change the status of the activity to COMPLETE using wf_engine.abort_process, will this close the FYI notificatoin corresponding to that item key?
Thanks a lot
KK

Hi,
The cursor which the code uses does not check whether they are response required or FYI before aborting the process.
If the notification is open when the API is called, it is cancelled by calling WF_NOTIFICATION.cancel.
So - yes, it will close any open FYI notifications as well as open notifications which require a response.
HTH,
Matt

Similar Messages

  • FYI Notification using AME

    Hi all,
    My requirement is to send FYI notification to list of approvers. I want to do it using AME rather than Workflow.Please tell me how to achieve this.
    Thanks
    Pradeep

    Hi;
    I solved it :)Nice to hear issue has been solved ;)
    1. If possible, Please share solution for future similar issue
    2. Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
    Regard
    Helios

  • How to create custom FYI Notification in the iRecruitment Notification Approvals Transaction type

    Dear All,
    Does anyone know how to create a custom FYI Notification using the Notification Apporval Transaction type??
    my requirement is when the Candidate complete filling his personal information and upload required document, a notification should be sent to the recruiter informing that all documents have been uploaded.
    Can anyone tell me how to do that?
    Thanks
    Regards

    Hi,
    Please see this thread.
    Want to send public message to all oracle apps users while instance up
    Re: Want to send public message to all oracle apps users while instance up
    Also, see these docs/links.
    Managing Downtime in Restricted Mode from OAM [ID 364236.1]
    R12 Enabling Applications Maintenance Mode and Preventing User Access [ID 557964.1]
    Downtime and Apache Restricted Mode in Release 12
    http://blogs.oracle.com/stevenChan/2008/03/downtime_and_apache_restricted_1.html
    Thanks,
    Hussein

  • FYI Notification after final approval using AME

    Hi,
    We have a requirement where we need to send a FYI notification to a group of people after final approval. Could you please guide if it can be done with the help of AME or not.
    If yes can you please tell me the detail steps.
    Regards,
    Rakesh.

    Hi Rakesh,
    - you can create another rule in AME with the same conditions as your main rule.
    - Make sure the rule type is For Your Information.
    - Create approval groups for the people you want to send the FYI notification to and add these approval groups to the rule (using Post Approval as action type)
    - Make sure the order number of your new approval group is higher than the order number of the approval groups in your main rule. This will ensure that the FYI notification goes in the end and not somewhere in the middle.
    Thanks
    Shailendra

  • FYI Notification getting canceled while sending notiifcation 2nd time

    Hello Gurus,
    I have a custom workflow which incorporates AME and AME returns 2 of FYI Receivers groups at the end. I have designed the workflow so that It get the approval group from AME and checks if thats the FYI Group or not. If its FYI Group then it sends a FYI Notification to that group and get backs to Get_Next_approver_from_AME function to get the next approval group. After regular approvals, for the 2 FYI groups which it gets at the end, It is sending the FYI notices to groups but while sending the 2nd FYI notice it is canceling the first one. I have tried all the possible solutions setting the "On Revisit" to "loop" instead of "Reset". Can anybody suggest any other solution for this?
    We are on R12 and using WF Builder 2.6.3.0.1
    Thanks,
    Sunny.
    Edited by: user13369509 on Jul 21, 2011 11:24 AM

    Set the 'On Revisit' value to 'Loop' and verify the issue.
    If the value is 'loop' then Workflow Engine simply re executes the pivot activity and all activities that follow in the loop, without resetting, as if they have never been executed before.

  • Rename ok button from FYI notification in oracle workflow.

    Hi All,
    In Oracle workflow the Client want to rename the OK button in FYI Notification. Is it feasible? If yes then how to do this.
    Please help.
    Regards,
    Uday
    Edited by: 823973 on May 10, 2013 12:03 AM

    Dear Pradeep,
    Thanks for your reply.
    If we use normal workflow button the user has to reply the answer with an email to notification mail server.We want to achieve the confirmation message with just a click of button.
    We are looking for all possible aspects to achieve the desired functionality.
    Regards,
    Rajesh

  • Need to send FYI Notification - Oracle Applications

    Hi,
    I need to send FYI notification upon completion of one concurrent program of PL/SQL procedure type. Can I use WF_NOTIFICATION.SEND method? Alreay I have one custome FYI message defined in WF_MESSAGE table. I am new to workflow and dont want to touch or create the workflows....Any help?
    Thangs

    Dear All,
    I am facing problem regarding completion notifications in Oraclr r12, when user click the upon completion generated notifications it can only be viewd once, second time user cannot view the notifications.
    I have find that fnd_file_temp table store this information and deleted it.
    Plz help me how to view this URL again.
    thanks
    regards,
    Zubyr

  • Amend a FYI Notification

    Dear All,
    I hope that you can guide for this issue.
    We have a need to include Absence Details in our FYI Notifications for Absences.
    The Notification that we receive has no details and FYI Recipients do not have an insight of the Absence.
    We tried to include a FYI Group in our AME Configuration.
    By doing so, we managed to send a copy of the Notification for Approval to the FYI.
    However, what we have noticed is that once the Approver acts on this Notification and closes it, the FYI Notification is closed as well.
    We tried to amend the Workflow Notification by setting the Expand Roles Checkbox after some RnD, but still same issue.
    But one thing that we did not do was to bounce the server after setting the Expand Roles Checkbox.
    Pls. advise people
    Thks
    Ravi

    Hi,
    If you want to send the absence type also along with FYI then take the back up of message and add the fuction (in this func set the attribute with the absence type) to get the absence type before this FYI noti. Use this attribute in your seeded message.
    Note : Before makig ay change to seeded message take its back up.

  • Regarding FYI Notification in SSHR

    Hi Group,
    The requirement which we have is to have a FYI notification for the the address change and and Extra Information Type Change(EIT) through self-service. The FYI Notification should have the detail for the field change and what has been changed.
    Can anyone help me out with this.
    We are using R12
    Thanks
    Nitin Singh

    Hi, since AME FYI as I know use the HR Transaction table to display data , the FYI has to be before any approval process or before final approval process. If there is no approval required I don't think you can see the data in the FYI notification.
    First you have to create approval group which will include the person for the fyi. it can be static or dynamic.
    Then create approval rule with category for your information and link the condition like WF process with the approval group.

  • FYI Notification in EIT Workflow Process

    Hello,
    I have created a EIT and added to Employee Self Service. Employee will use this EIT to store the Coaching Feedback.Now this feedback should go as FYI Notification to Manager , this should be just FYI and no approval is needed.
    I configured the AME Rule Category as 'For Your Information'. Now the FYI is going to Manager correctly. However FYI Notification don't have employee coaching feedback . So how can i send FYI Notification to Manager with feedback detail.
    Please advise!
    Thanks
    Gaurav

    Hi,
    This feature is only available from 12.1.3. You need to add parameter pNtfFyiDetails=Y to the respective function.
    Please review note 1355465.1 for more details.
    Regards,
    Anish

  • FYI Notification for EIT

    Hello,
    We have a below requirement for EIT Approval and FYI Notification -
    1) Employee will fill their training need in a EIT in self service,
    2) This EIT will go the Manger for Approval.
    3)If Manager Approves it then it will go to the Training department for Approval.
    *4)If Manager rejects it then one FYI Notification should go to the Training Department that Employee Manager has rejected it.*
    Every thing is fine Upto the 3rd point and we can achieve this with AME. However we are not sure how to send the FYI Notification to training department if the Manager rejects the training need for employee.
    Please let me know if you need any other information on my requirement.
    Thanks in advance for your anticipated help!
    Thanks
    Gaurav

    Gaurav, Approvals are setup using AME but called using HRSSA workflow. HRSSA workflow checks the approvers only when the response is approved. Once Rejected you can not change the process flow with AME. I am afraid you would have to customize the workflow at the time of Rejection Response.
    When you customize the workflow you have to keep in mind that same approval process is used across all the HRSSA workflows, so if you change all the processes would change.

  • FYI notification to group of people in SSHR

    We want to send a FYI notification to a group of people if the employee change his/her name. we are using 11.5.10cu2 AME.B. How do I acheive this functionality?
    TIA!

    Notifications have to be send to a person who has a USER on the system. To participate in SSHR workflows, the USER must also have a valid PERSON record in HR. Unless these 2 conditions are satisfied, you cannot send a notification to someone. The only option I can suggest is either an ALERT or you change the workflow so that an EMAIL is sent with the contents of the norification.
    As long as your system does not prevent the sending of emails outside your domain, you can send emails to any email address.
    Hopt that helps.
    Regadrs
    Tim

  • Adding FYI notification to Irecruitment workflow

    Dear Friends,
    I'm new to Workflow.please guide me to add a FYI notification after the final approval in the Irecrutiment Workflow.
    For Irecruitment Approval Process I need to FYI to two persons after the final approval.
    For this,I'm customizing the Irecruitment Workflow's Process: iRecruitment New Vacancy.
    I have created one Message named 'XXX FYI MSG'
    Created a new Notification named 'XXX FYI Notifiaction'.
    Selected 'approval' as Result Type field.
    Selected 'XXX FYI MSG' in the Message Field.
    Have selected EXPAND ROLES chk box.
    In the ROLES tab,
    I have attached the person's name for READ field who is going to view only.
    in the Write and Execute field I have added the name of another person who is going to further update/execute if so.
    Also I have added 'Approved Flag' attribute to 'XXX FYI Notification'.
    I have attached this notification at "access level =20" between SEND APPROVED NOTIFICATION and END in the process diagram.
    but while saving to Database I get errors as
    WFDESV_FAIL COUNT=2
    WFACTV_FAIL OPERATIonfiltered=SAVE NAME=XXX FYI NOTIFICATION TYPE=IRC_WF
    WFACTV_NTF_FUNCTION
    WFACTV_FAIL OPERATIonfiltered=SAVE NAME=IRC_VACANCY_NEW TYPE=IRC_WF
    WFPACV_FAIL NAME=XXX FYI NOTIFICATION TYPE=IRC_WF
    WFPACV_RESULT_MISSING CODE=REJECTED
    Can u please help where the error is...where I'm missing any steps, if any?
    Please rectify if I'm wrong:
    Instead of creating a new message and notification can I add the names of the FYi'ing persons in the SEND APPROVED NOTIFICATION's ROLES and NODES tab.
    or
    Instead of attaching the the XXX FYI NOTIFICATION between SEND APPROVED NOTIFICATION and END link, Can I create a new link from SEND APPROVED NOTIFICATION to XXX FYI NOTIFICATION and from XXX FYI NOTIFICATION to END making the SEND APPROVED NOTIFICATION and END link intact.
    waiting for your reply...
    with rgds,
    Shrinaw
    DB version is 9.2.0.6.0 and Apps instance is 11.5.10

    You can create the Adhoc role using the following API
    declare
    l_role_name varchar2(50):='TESTROLE1';
    l_role_display_name varchar2(50):='TESTROLE1';
    begin
    WF_DIRECTORY.CreateAdHocRole (
    role_name => l_role_name,
    role_display_name => l_role_display_name ,
    language => 'AMERICAN'     ,
    territory => 'AMERICA' ,
         email_address => null,
         notification_preference => 'MAILHTML'
    commit;
    end;
    and associate the users to this role using the following API
    declare
    l_users varchar2(100):='TESTUSER4 TESTUSER5' ;
    begin
    WF_DIRECTORY.AddUsersToAdHocRole (
    role_name => 'TESTROLE1',
    role_users => l_users
    commit;
    end;
    separate the user names with the space as given for l_users

  • Automated report email notification using SCCM 2012

    For SCCM mail notification using Office365 exchange.
    Is smtp rely required.. Please suggest and provide link 

    duplicate thread.you have also asked the same question here http://social.technet.microsoft.com/Forums/systemcenter/en-US/cccd6760-0416-4fed-b5df-d19fac00035f/automated-sccm-report-send-to-email-addresssccm-2012?forum=configmgrgeneral#0e84de61-c872-44fe-8544-f6b39450a44d
    Eswar Koneti | Configmgr blog:
    www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: Eskonr

  • Planner group is not updated in service notification using BAPI

    Hi,
    Planner group is not updated in service notification using BAPI BAPI_ALM_ORDER_MAINTAIN.
    I have written the below code, but planner group is not updated in the service notification.
    Please advice which parameters do i need to pass to update planner group in the service notification.
              wa_methods-refnumber      = '000001'.
              wa_methods-objecttype     = 'PARTNER'.
              wa_methods-method         = 'CREATE'.
              wa_methods-objectkey      = wa_subscr1-aufnr.
              APPEND wa_methods TO i_methods.
              wa_methods-refnumber      = '000002'.
              wa_methods-objecttype     = 'HEADER'.
              wa_methods-method         = 'CREATE'.
              wa_methods-objectkey      = wa_subscr1-aufnr.
              APPEND wa_methods TO i_methods.
              wa_methods-refnumber      = '000000'.
              wa_methods-objecttype     = ' '.
              wa_methods-method         = 'SAVE'.
              APPEND wa_methods TO i_methods.
              REFRESH i_partner.
              CLEAR wa_partner.
              wa_partner-orderid        = wa_subscr1-aufnr.
              wa_partner-partn_role     = 'VW'.
              wa_partner-partn_role_old = ''.
              wa_partner-partner        = wa_subscr1-parnr.
              wa_partner-partner_old    = ''.
              APPEND wa_partner TO i_partner.
              REFRESH i_planrgrp.
              CLEAR wa_planrgrp.
              wa_planrgrp-orderid        = wa_subscr1-aufnr.
              wa_planrgrp-plangroup      = wa_subscr1-ingpr.
              APPEND wa_planrgrp TO i_planrgrp.
              REFRESH i_planrgrp_up.
              CLEAR wa_planrgrp_up.
              wa_planrgrp_up-orderid     = wa_subscr1-aufnr.
              wa_planrgrp_up-plangroup   = 'X'.
              APPEND wa_planrgrp_up TO i_planrgrp_up.
    *----Change order details with Technician name
              CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
                TABLES
                  it_methods   = i_methods
                  it_header    = i_planrgrp
                it_header_up = i_planrgrp_up
                  it_partner   = i_partner
                  return       = i_return.
    Thanks & regards,
    Krishna

    Try this way
    CALL FUNCTION 'BAPI_SERVNOT_CREATE'
    EXPORTING
    * EXTERNAL_NUMBER =
    notif_type = 'S3'
    notifheader = ls_notif_h
    * TASK_DETERMINATION = ' '
    * SENDER =
    * ORDERID =
    IMPORTING
    NOTIFHEADER_EXPORT = ls_notif_e
    TABLES
    * NOTITEM =
    * NOTIFCAUS =
    * NOTIFACTV =
    * NOTIFTASK =
    * NOTIFPARTNR =
    * LONGTEXTS =
    * KEY_RELATIONSHIPS =
    return = lt_return
    * IF lt_return IS INITIAL.                                               " <<< Comment this lie
    read table  lt_return into ls_return with key type = 'E'. " << Change
    if sy-subrc ne 0.                                                             " << Change
    COMMIT WORK AND WAIT.
    write: / ls_notif_e-NOTIF_NO.
    ELSE.
    LOOP AT lt_return INTO ls_return.
    WRITE:/ 'errors'.
    * ls_return.
    ENDLOOP.
    endif.
    a®

Maybe you are looking for