Goods receipt message empty - MIGO with purchase order

Hi,
In MIGO, I do a goods receipt with reference to purchase order. On the purchase ordre the flag "Goods Receipt Message" is flagged.
In my business workspace I receive the email, the message title is ok but message is empty, the text is not displayed. The issue is in my ECC6 system, it works fine in 4.6C system.
Where can I customize the content of the mail.
Can I see it in SO10, is this a standard text ?
Thank you.

closed

Similar Messages

Good receipt(GR) on a change Purchase Order(PO )item

Hi,
We create a PO item with X quantity of unit $Y. We did a mvt type:910 GR to temporary match the IR downpayment. Along the way, we made a change to the unit price of the item to $Z. When all the IRs are in, we perform a mvt type:911 to reverse the GR and did mvt type:911 GR. However, we notice now the GR didn't follow the new PO amt of $Z. Why is this so? Is this standard SAP behaviour?
Thanks,
Teo

Gr must be at current price...check inforecord also..

Kanban with purchase order : avoid manual change status to full

Dear guru ,
i use a kanban with purchase order.
When I enter status empty (using for example PK13N) the system create purchase order.
I want to avoid that the users enter status full using PK13N or PKBC .
The users execute goods receipts against purchase order using MIGO in order that the system trigger status full automatically.
How can I avoid that users change manual status to full using PK13N or PKBC ?
Thanks.

We have this scenario and to solve that we did a development. I heard in the past that even you can configure it on SPRO it doesn't work.
I made some tests recently but I didn't get any positive result. We did tests entering the kanban id into the inbound delivery and post through vl32n and migo but it doesn't work.
Regards
Eduardo Chagas

Print document type Q02( technical delivery terms) with Purchase Order

Hi all
1) I have activated the QM procurement for a certain material and I have assigned the control key that makes mandatory the technical delivery terms on the material master (standard control key 0002).
2) I have created a Document Info Record Q02 to hold the Technical Delivery Terms assigning a PDF file. Document is released.
3) I have assigned the DIR to the material master (object link in the DIR).
I would like to know how to print the this DIR with Purchase Order. I am testing this scenario in IDES system and the form does not get printed.
Could anyone please advice how to get the PDF file printed with the purchase order?
Thank you

Hi Sappmqm,
There is no internal way, you would have to create an ABAP program to handle this function, where it would search the material record to pull the DIRs linked and then open them on user's screen for printing.
Additional SAP add-ons are available as 3rd party apps, can click my name and contact me for more detail if you like.
Good luck.

Goods Receipt entry for items with serial number

Hi All,
When I try to create a Goods receipt entry, for items with serial number, i'm always getting the following error message.
[OSRI] , 'The selected quantity of serial/batch numbers is greater than the quantity in row Id'
The following is the code that I'm using
Dim oInvetoryGenEntry As SAPbobsCOM.Documents
Dim oSerialNumber As SAPbobsCOM.SerialNumbers
Dim ErrCode As Long
Dim ErrMsg As String
Dim ret As Long
Set oInvetoryGenEntry = oCmp.GetBusinessObject(oInventoryGenEntry)
Set oSerialNumber = oInvetoryGenEntry.Lines.SerialNumbers
oInvetoryGenEntry.DocDate = Now
oInvetoryGenEntry.DocRate = 1
oInvetoryGenEntry.TaxDate = Now
oInvetoryGenEntry.PaymentGroupCode = "3"
oInvetoryGenEntry.Comments = "GRN Entry11"
oInvetoryGenEntry.Lines.ItemCode = "A00004"
oInvetoryGenEntry.Lines.Price = 100
oInvetoryGenEntry.Lines.Quantity = 1
oSerialNumber.SystemSerialNumber = 55555
oSerialNumber.InternalSerialNumber = "2354"
oSerialNumber.BatchID = "bt1"
oSerialNumber.Add
ret = oInvetoryGenEntry.Add
If ret <> 0 Then
        oCmp.GetLastError ErrCode, ErrMsg
        MsgBox ErrCode & " " & ErrMsg
    Else
        MsgBox "GRN Entry made."
    End If
It would be wonderful if anyone help me out to trace the exact reason for this issue.
Thanks
John

Hi John I'm almost sure that your working with SDK 6.5 with SP1 or lower, visit this address
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://DI: Add more than one serial numbers in Invoice
Maybe you can find your answer if you can fix it let me Know my email address is [email protected] because i had the same problem.
Regards

MESSAGE TYPE DEFAULT FOR PURCHASE ORDER

Dear All,
I want to set default message type ZNEU for all purchase order. I try this with T-CODE MN04 AND MN05 but it is not working.
SO HOW I MAKE MESSAGE TYPE DEFAULT FOR PURCHASE ORDER
Regards,
Pankaj

Hi,
Miantain the all the conditions records in t.code : MN04. after that check for the "Define Partner Roles for Purchase Orde" what did you mentioned for new or change as per that,
Check you had fine tune the output (message) type in following path:
SPROMMPurchasingMessageOutput controlMessage tyoesDefine message type for Purchase Order--Fine-Tuned Control: Purchase Order
Select the check box coresponding to your output(message) type ZNEU to have print output for this message type .......
Now try creating PO & u will have default message type ZNEU......
Hope this will help you.......
BR,
Patil

Output message not generated for Purchase order

We maintain MN04 message condition record for 2 key combination for output type NEU:
1. Purchasing Output determination : Document type -> NB, medium 1 print out
2. Purchasing Output determination : Document type/Pur Org/Vendor -> NB, 1000, vendor 20001, medium 5 External email
When I create PO for other vendor (not 20001), the system is nicely generating the output of the PO for printout.
Next we have maintain a condition record in MN04 for a particular vendor 20001, Doc type and Porg with setting 5, 4, EN so that we can send the PO via email to the vendor 20001, the system is not generating a message output of the purchase order when i check it before saving.
Please help me with this situation. we need setup the email PO functionality.

I created another message type ZNEU copy from NEU, include it in the message schema, created condition record with MN04/MN05 for both NEU for printout and ZNEU for medium 5 email. done all steps mentioned in the links.
When create a PO still only 1 message record NEU is defualted for printout only.
The message record for email ZNEU is not defaulted in PO?? Anything elase need to be done.

Vendor postings with purchase order

hi,
I am learning SAP Fi/co.I have one doubt .what are steps we have to maintain to post vendor transactions with purchase order.if u have any material about mm plz send to me.

Commitment
Definition
Identifies costs that will be incurred in the future for materials and services that you have requested or ordered. Commitments reserve funds that will become costs at a future date.
Use
On the account assignment objects, Commitments Management portrays the cost side of the procurement process for MM Purchasing. The costs incurred are assigned to business objects, such as orders, cost centers, or projects.
In Commitments Management, you can specify which object the costs are to be assigned to (for example, purchase order costs). In this case, this is known as an Initial Account Assignment.
Commitments Management distinguishes between three types of commitments, depending on the account assignment object:
Order Commitment:
The commitment is initially assigned to an order.
Cost Center Commitment:
The commitment is initially assigned to a cost center.
Project Commitment:
The commitment is initially assigned to a project, or to a work breakdown structure element.
For more information, see the SAP Library:
For Internal Orders
Financials ® Controlling ® Internal orders ® Manual Actual Postings On Internal Orders.
For Cost Center Accounting
Financials ® Controlling ® Cost Center Accounting ® Manual Actual Postings.
For Project System
Financials ® Controlling ® Commitments/Actual Updates Of Transaction Data
Integration
Commitments occur
In Purchasing, due to:
Purchase requisitions (purchase requisition commitment) define the internal requirement for a material or a service. Purchase requisitions have a control function and you change them at any time.
Purchase orders (purchase order commitment):
Purchase orders are contractual requests to a vendor, to supply certain goods or services according to the agreed conditions. No short-term, unilateral changes can be made.
due to funds commitments (commitment for funds commitments):
- You can use Funds Commitments to reserve funds for costs you are fairly certain to incur, but you cannot yet assign to a specific business transaction (such as, a purchase order or a purchase requisition).
Regards,
SUbha

KO22 explain with Purchase Order

Please explain, how KO22 (Original Budget related with Purchase order, Using Internal Order)

Hi,
When you create an budget for 1000 and a PO for 500. (say you have set up a max from 10 %) You make a new PO for 600 there is no problem but it is not possible to create a new one for 601.
The rule is Budget - postings - PO = ammount to go.
It is possible to exclude som g/l account. and create fases, Like budget is on:
100 procent message and send a Mail
110 error
Paul

Indicator: Goods Receipt Message

Hi guys,
in PO in label 'Delivery/Invoice' there is flag Goods Receipt Message and it seems there is the possibility that the system is to issue an appropriate message to the buyer..it is very interesting but both in this forum and on SAP OSS I have not found the details about implementing..Do you know any link or the argument for giving to me advices to implement this process?
thanks in advance
Bye

Hi,
check this link for the PDF
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0e19d4c-b72d-2d10-72ad-a38a70c2a53f?QuickLink=index&overridelayout=true
hope it helps

MIRO: posting to G/L Accounts with purchase order reference

hello
our company want to post an invoice for other expense in MIRO through the tab "G/L Acconunt" and don't through the tab "PO reference".
our problem that when we post through "G/L Account" how we allocate the "purchasing document" to the line of G/L Account?
in miro there is an option to create a posting line with purchase order reference to a g/l account and i read the documentation that says proceed as follows:
1. choose miro
2. enter header data as required
3. allocate the invoice to a document and check the items to be settled - i don't underdand what i need to do in this step?
4. choose the tab page g/l account
5. enter data as requierd.
thanks
meir

hi
in the table below your MIRO screen you will see PO Reference on this tab select the item of the PO that you need post for this PO, in the tab G/L account you can make manual post aditional to the PO, also you can in the tab PO reference modify amounts and quantity if you need, but it is not recommended

Invoice Verification without GR and with Purchase Order

Hi all
During the Logistic Invoice Verfication (MIRO) without GR and with Purchase Order, I want to exclude "Invoice to be received" account (WRX) from the posting. How can I do it?
Let me know
Thanks

it doesn't work. Can you explain me better the solution?
Thanks

How to link asset with purchase order and PO Item.

Hello,
I have to generate a report which contains columns
Asset No , po no(ebeln) ,PO Item(ebelp),Material no etc
My query is how to link asset with purchase order and PO Item.
I am selecting asset and po no. from anla but how to get
po item no(ebelp)?
po line item is important in this report because every line item has differrent asset and material no.
i tried to match asset no in mseg table but i am not getting asset no in mseg .
how should i proceed ?

Thanks Thomas & Srimanta for the quick response.
When I checked EKKN table by entering PO there is no asset no. in anln1 field.
Also I would like to add that, In me23n for a PO, account assignment category we are entering 'F' for internal order settlement.
Where can i find the link between asset and po no(ebeln) and po item(ebelp)?
Regards,
Rachel
Edited by: Rachel on Aug 11, 2008 7:23 AM

Updating Batch classification data from MIGO for Purchase order

Hi,
I need to update batch classification data (in MSC3n) from MIGO for purchase order. The logic needed for this is as below,
1) Pass material and batch to MCH1 table to get CUOBJ_BM.
2) Pass CUOBJ_BM to INOB table to get INOB-OBJEK.
3) Pass INOB-OBJEK to CLAF_CLASSIFICATION_OF_OBJECTS to get class name & characteristic name.
4) Pass INOB-OBJEK, CLASS name and characteristic name to BAPI_OBJCL_CHANGE to update batch classification data.
I created implicit enhancement at the bottom of FM "CLVF_VB_INSERT_CLASSIFICATION". But the problem is, the return parameter of BAPI_OBJCL_CHANGE is giving the following error.
Class type 023, object type MCH1, object RAW-6 0000001151
Object is currently locked by user
The assignment was not changed
Please let me know how to do it. Is there any BADI or User Exit?

Hi,
As you said the break point is not triggering did you activate your exit and activated even the project to which your exit is assigned.
I hope you missed activating your project in CMOD transaction. Please verify it once and if it is not activated then immediately activate it and try debugging again.
Regards,
Rafi

No Update FMIOI and KBLP tables with purchase order

Hello,
We have un serious problem : No Update FMIOI and KBLP tables with purchase order
System : SAP ERP 6.0 /7.0 - EHP 4
Note 965633 was read.
1) First case: The purchase order 4510000673 does not reduce the funds reservation.
Purchase order 4510000673 should consume the funds reservation 1200000193 because all post of the PO charge the funds reservation 1200000193.But the consumption history of the funds reservation 1200000193 donu2019t show this consumption.
In table FMIOI, we do not have lines with amount type 0200 (reduction) but whe have the lines with the post of PO with amount type (0100). The Purchase order 4510000673 should consume the funds reservation 1200000193.
In table KBLP, the fields are :
Total amount (LC) - HWGES = 53.409,40
Amount used u2013 WTABB = 0,00
Reduction amount u2013 HWABB = 0,00
Open amount u2013 CWTFREE =    53.409,40
Reduced amount u2013 WTABG = 0,00
Reduced amount u2013HWABG = 0,00
To solve the problem, we executed the transactions : FM4N et FMN5 and the program RFFMRC20 but no result.
2) Second case : Delete a item of a purchase order does not release the budget
The single item of the purchase order 4510000597 is deleted but in the display of consumption History of the funds reservation 1200000137, the amount of the purchase order is not to zero.
To solve the problem, we executed the transactions : FM4N et FMN5 and the program RFFMRC20 but no result.
Somebody already had a similar problem ?
Thank you
Fabian

Hello Fabian
There are two known notes dealing with missing update on reference Earmarked Funds, I am listing them for future references:
1376800 Earmarked funds: Incorrect open amount
1438487 RFFMRC20: Missing KBLE records are ignored
These notes correct some errors within the Standard.
However, in your scenario, problem has to do with an incorrect execution of a Commit work inside a customer user-exit. After elimination of this commit work, new Po's are working correctly.
Remaining task is the correction of old PO's. Manual correction via small changes with ME22N (for instance, adding a '.' to the line item text/s) will force the correct update and fix your database
If you agree, we can close this thread (?)
Kind regards
Mar

Goods receipt message empty - MIGO with purchase order

Similar Messages

Maybe you are looking for