GPS non-functional on out of box Nokia E90 in Indi...

Hi,
GPS isn’t working on my father’s Nokia E90. Apparently, it can’t find GPS satellites. I haven’t installed any Nokia or 3rd party software. All I have on the phone are the default, out of the box packages. How do I start troubleshooting GPS? Please help.
Connection: Vodafone India, Kolkata.

Try checking whether it has Assisted GPS (A-GPS) enabled, the standard set up takes ages (up to an hour on mine) to lock onto satellites.
To do this:
Tools -> Settings -> General -> Positioning (at the bottom) -> Positioning Methods
Enable "Assisted GPS" and disable "Integrated GPS". Mine finds and locks on to satellites with a minute.
If you don't have A-GPS listed, a firmware update might be needed to get hold of this setting.
I have full End User experience of:
5510, 3210, 3310, 3510, 3510i, N80, N80IE, 7610, 2610, 1208 and current E90.

Similar Messages

How do I get my old Foxfire layout back, because I can not find any where to click that makes any sense. Really bad design, none functional with out some very indepth information to mmove me through it. Very bad design.

I have Vista for an OS, I was running Foxfire 3.4 when it started to freeze after opening the internet the first time and forced me to open the internet again to have function. The first one could not be interacted with at all, not even to close it.
I loaded Foxfire 4 and now can not even understand the layout. Nothing makes any sense at all. Where are all the normal features? Where do my open in new tab s go and how the hell do I get to them? I am too frustrated to even accept the new interface. I want the old interface back.

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

K8N Neo4 (MS-7125) USB, Mic, S/P Out, and LAN ports all non-functional

I'm hoping someone can give me a hand with this. I'm not a novice when it comes to motherboards but this particular board is making me feel like it.
Ok, I've got a K8N-Neo4 MS-7125 model. Athlon64 3700. I have all the current drivers and ran the liveupdate to make sure.
The LAN port will light up, but the Device manager will not recognize it, nor will the LAN utility.
The board has 4 USB ports. The top two are non-functional, the bottom two work.
The S\P OUT port has never worked, nor do I know how to engage it or find it on the device manager
The microphone....this one is fun. Its like the microphone is stuck in a feedback loop. Whatever comes through my speakers, is heard on the other end by other users. I am not heard at all, although I can hear myself through my OWN speakers. Even with the mic unplugged, people still can hear my speakers. Imagine having your speakers plugged into the mic jack. The only way to kill the feedback is to actually go into the sound manager and mute the whole mic system.
I can live without the LAN and USB ports, but it would be a HUGE help if someone can help me with the mic and S\P ports!!
Thanks!!!

Ok, I'll do my best to remember everything
Athlon64 3700 939socket
XP Pro Service pack 2
Rosewill case 400watts
SonyDVDRW Drive (dual layer)
Samsung DVD drive
GEForce 7300 256DDR (PCI Express)
120GB Seagate 7200 RPM Harddrive (IDE) Partioned two drives
1x512DDR ram PC3200 400mhz
As for the flavor of the NEO4 the only other numbers I know of, is on the board it says N1996 right below the processor. Is that what you need? Its a PCB V.3 board nvidia Nforce4.
Speakers are standard cyber acoustic
Logitech Mic/Headset combo
This particular case allows for hookups for headphones and mic in the front. The case has jumpers in the back that allow you to gain access from the front (but you probably already know that). I've always used the front MIC/Headset jack, and I have a splitter in the back for the headphones and that jumper. In trying to resolve the issue, I tried every jack with the microphone (even the ones that I know are labeled as speakers). I do get my own voice through MY speakers on the front jack AND the mobo jack.
Hopefully I got you enough info!
Thanks in advance!!!

Back button is premanently greyed-out and non-functional

I have tried all of the suggested fixes: disabling add-ons and extensions, deleting and re-installing the program, etc... but the back button remains non-functional, even on safe mode and after the last few updates. I cannot use the browser until this problem is fixed, and will continue to use Chrome until it is (even though I hate it and really miss Firefox). Funny thing is, it only happens on my Macbook Pro, running the latest version of Snow Leopard... it doesn't happen on my i7 iMac, running the same version of Snow Leopard.
Any help would be greatly appreciated.
Thanks, and have a great day,
-Jim

Ralph Johns (UK) (to Emily Vu) 19 minutes ago
Hi,
Check the Font AppleGothic.ttf is active and validates using the Font Book app.
if you have to change anything restart the Mac.
If this is not the issue go to ~/Library/Preferences and find com.apple.ichat.plist and Drag it to the Trash and then restart Messages.
The above reply in another thread solved my issue! Namely that my apple gothic font was disabled, breaking the entire Messages app.

USB Ports on 3 month old Satellite C655-S5049 do not work-even after Recovery to "Out-of-Box" state

Hello - Hoping someone can help with another suggestion- it doesn't look good.
Both USB ports on my wife's 3 month old Satellite C655-S5049 are non-functional with any USB device. Flash drives, wireless mouse, and external hard drive (powered) that all work on all of my other computers, do not work in either of this laptop's USB ports.
This problem seems to have developed gradually, and became noticeable previously as non-responsiveness in the wireless mouse, which gradually became a concern, with the computer appearing to freeze or lock-up - probably because of the number of times the mouse was clicked on shortcuts and executables before something happened.
The ports are now completely "dead"- no recognition of anything inserted once the computer is up and running.
There appears to be a thermal component involved, since I was able to get the devices recognized and working for up to a minute when booting the computer with the devices in the ports after it had been off for several hours after I did the default state recovery. The flash drive and mouse were recognized, drivers loaded message, but they then went to "unplugged" before I could get the cursor moving. I was able to access the flash drive, since I did it as soon as the driver loaded, but then it disappeared ("un-plugged" itself in the driver loaded message box). I can also get them recognized from this COLD boot state when I immediately plug them in once Windows 7 (64) loads, but they quickly disappear. If I wait a few minutes before re-booting, they flash during the Windows boot, but drop-out before it completes. If I wait 3-4 hours to re-boot, they flash (are recognized) for about a minute (Windows completely loads), but then they drop out.
I tried all of the suggestions on this board (and others) before doing a Recovery to Factory Default state. I have tried it with the original version 1.20 Bios, and with the version 1.50 Bios update. All driver updates have been downloaded and installed. The laptop does occasionally lock-up at the Toshiba screen during boot, and is verrrry slow in some operations (2 hours to do the recovery discs). The only other noticeable problem (at this time) is an occasional drop-out of wireless (Atheros AR9285) connectivity, which I have been blaming on the router since it is sporadic and infrequent (not consistent with the thermal argument). These problems are all after the Factory Default State recovery operation, so my assumption is that they are hardware based.
Any suggestions for a solution? This is a standard spec Satellite C655-S5049 that I was considering adding another 2GB memory to, but now I am unsure of its' future. A laptop cooler that runs from a USB port seems counter-productive.
I am technically capable, so you can be much briefer in your response than I have been in trying to fully detail the problems. This isn't the NVidia chip, but it does bring back memories of laptops past.
Thanks for any help,
G

I AM HAVING THE SAME PROBLEM WITH THE SAME MODEL. I GOT THE SERVICE
MANUAL AND I'M THINKING TO OPEN IT AND SEE IF THERE'S SOME PHYSICAL BAD CONNECTION
INSIDE. BUT LIKE YOU SAID. IT'S ONLY THREE MONTHS OLD.!!! I DON'T WANT TO RUIN THE WARRANTEE.
BUT THIS IS VERY FRUSTATING. I WANDER IF TOSHIBA DOES THIS ON PURPUSE.!!! KEEP IN TOUCH AND
IF YOU NEED THE SERVICE MANUAL CONTACT ME AT [email protected]
THANK YOU.!!!!

Late 2013 15" Macbook Pro - iCloud Apps become non-functional

Hi Everyone,
My new top of the range Macbook Pro has some issues... Here's the specs:
2.6GHz Quad-core Intel Core i7
16GB 1600MHz DDR3L SDRAM
1TB Flash Storage
Arrived on Tuesday last week. Obviously very excited etc...
Noticed after 30 minutes that all my iCloud apps failing (under my account).
All the following apps fail to open with a beachball timeout
iMessages
FaceTime
iCloud (via System Preferences)
Maps
TextEdit (won't show any existing iCloud documents
Airplay
However oddly enough Calendar works.
It's currently with Apple Engineering who are yet to reply.
Now the weird bit.... If a create a new login account under the macbook and utilise my wife's iCloud (apple id) everything works perfectly.....
Apple are now in the process of sending me out a new machine since they're considering this one Dead On Arrival..However I've now got a 3 to 4 week wait due to 16GB ram supply constraints.. :-(
I've reinstalled Mavericks 4 times now and the same issues come back within about 30 minutes.
Very frustrating to spend that much money and have a non-functional computer..
Anyone else experiencing these issues?
Cheers.
Benjamin.

I can happily report now that the issue has been resolved.
Via the logs sent to Apple engineering the issue was found to be a conflict between iCloud contacts and Google contacts.
For some reason (a bug in Mavericks) even though I didn't tick the box for google contacts to come across to the MacBook, it turned itself (in Internet Accounts via sys pref) on when activating my mail (gmail).
I'll say it again. It turned the tick on internet accounts / gmail / contacts without me asking it to!
Also of note. If I had iCloud contacts turned off. After the 30 minutes iCloud contacts were also turned on. Very very weird behaviour!
The above meant that the Mac's contacts were syncing with iCloud and google. :-(
Why this issue affected all the other iCloud apps I'm not sure why. However it definitely did something! :-(
Resolution Path:
Go to Sys pref/internet accounts, select gmail and click the minus button. It prompts you if you want to delete from ALL associated machines. Click YES!
Only after confirming I wanted to do a remote delete of my iCloud internet accounts across ALL machines did the issue resolve itself.
It appears that iCloud and google contacts can't live (stay sync'd) together. Which of course was never my intention. I only wanted to use iCloud.
Doesn't explain why it failed internally but a resolution path was found :-)
The inbound replacement laptop has been cancelled accordingly.
My new MacBook is now running perfectly !!!
I hope the resolution path here posted may help others in the future if you encounter this issue!
Take care,
Bennie.

S10 HW 1/06, bge driver non-functional

Hello,
I'm having a problem with a new installation of Solaris 10 (HW 1/06) on a Fujitsu Siemens ESPRIMO P5905. It's a fairly new model x64 box. The system installed fine, but the on-board Broadcom Gigabit Ethernet is non-functional. I've tried both the Broadcom bcme driver and the Sun bge driver, plus I've installed the latest patches from Sunsolve (118844-30, 122028-02) with no luck. The system finds the card and appears to receive packets but not send.
Is there any way I can report a bug without a Support Contract from Sun?
The card is an on-board PCI-E chip and works fine under Linux 2.6 or Windows Server 2003. The PCI ID is pci11e4,1677 which is listed in /etc/driver_aliases for the latest (patched) bge driver.
One other detail are the following messages from the bge driver on load:
ddi_intr_get_supported_types(): Returned 3
Using legacy interrupt type
bge_add_legacy_intrs
Thanks in advance for any help...
-mato

Hello,
I'm having a problem with a new installation of Solaris 10 (HW 1/06) on a Fujitsu Siemens ESPRIMO P5905. It's a fairly new model x64 box. The system installed fine, but the on-board Broadcom Gigabit Ethernet is non-functional. I've tried both the Broadcom bcme driver and the Sun bge driver, plus I've installed the latest patches from Sunsolve (118844-30, 122028-02) with no luck. The system finds the card and appears to receive packets but not send.
Is there any way I can report a bug without a Support Contract from Sun?
The card is an on-board PCI-E chip and works fine under Linux 2.6 or Windows Server 2003. The PCI ID is pci11e4,1677 which is listed in /etc/driver_aliases for the latest (patched) bge driver.
One other detail are the following messages from the bge driver on load:
ddi_intr_get_supported_types(): Returned 3
Using legacy interrupt type
bge_add_legacy_intrs
Thanks in advance for any help...
-mato

Creating automated email reminders to users every 2 weeks via Workflow 2010 Out of Box approach only

Hi,
I have been asked to automate the email reminders to users (every two weeks) from the SharePoint2010 solution.
I am trying to achieve this via workflow ,but am unable to get the results.
Req :
Twice a month the users should get an automated email reminder for a specific task.
1. On 14th (or last working day in mid month -1) of the month. ( a field "mid month end" captures the date as 15th of the month)
2. On last working day - 1 of the month. ( a field "month end" captures the date as last day of the month)
Please let me know how i can achieve this via Out of box functionality. I donot have exp with workflows so a detailed steps guidlines will be very helpfull.
Regards,
Guru

Although you can start a workflow and then pause it for a number of days, I'd feel uncomfortable with that. If the farm crashes, who guarantees that the paused workflows will pick up where they were left off?
SharePoint does no offer to run a workflow on all items in a list/library -- which I feel is a big draw back.
The good news is that there is a free 3rd party tool that can run a workflow on all (or specific) items in a list or library. It's called the
HarePoint Workflow Scheduler and I love it.
You can create a view that shows the items that you want to run the workflow on.
Or, if you know how to write CAML, you can feed the CAML Query right into the HarePoint Workflow Scheduler task.
At my company we have several sites in production that use the HarePoint Workflow Scheduler with a view.
So, first, create a SharePoint Designer workflow and define it to run manually.
Then use the HarePoint workflow scheduler to define a schedule.
You can define a schedule for the HarePoint tool, like every day, month, week, etc., by just clicking a few boxes.
Since this functionality does not come out of the box with SharePoint 2010, this free tool is a real gem.
cheers, teylyn

"Edit" Functions Grayed Out and No Longer Work

I have CS5 and have used it for several years now and it has served me well but suddenly, I find that many options (such as most "Edit" options within it are noy grayed-out and non-functional. I've uninstalled it and re-installed but the problem is still there. I can no longer find a phone number to get tech help like I used to and am now totally stuck with a useless product. Does anyone know a fix here?

Jerry, thanks for the screen shots. As JJMack said, a preference reset might work. You might want to go to actions>edit on your post and remove the second picture. Looks like it has some personal info on it.
Try resetting the Photoshop preference file: Hold Ctrl+Alt+Shift/Cmd+Opt+Shift as you initiate Photoshop's startup. Select "yes" when asked if you would like to continue with reset.
Benjamin

I have used SAP doc mgmt for years. We copied a client and now when I configure a Class to my DMS DIR and go to CV01n Additional Data NONE of the characteristic entry boxes show up. Additional Data is blank.

I have used SAP doc mgmt for years. We copied a client and now when I configure a Class to my DMS DIR and go to CV01n Additional Data NONE of the characteristic entry boxes show up. Additional Data is blank.
It appears there must be some high level setting missing in the client. I have checked all authorizations and cannot find a difference between this client and all of the other clients we have. Only this one client does not show the class characteristics in the Additional Data tab.
Any ideas of why this standard function is not working). It does not matter which DIR I config the 017 class to, nothing shows on Additional Data.

Hi,
The issue is resolved. We are working in a sandbox with Class configuration on a DMS issue related to standard class 017. There are no standard settings in SPRO - Cross-Application Components | Maintain Object Types and Class Types | for the object type DRAW that will allow "auto-populating" characteristic values as we do with VC class 300.
For whatever reason DRAW and class 017 are not configured by SAP in the same manner as class 300 for example.
We made a config entry for DRAW Class 017 VBAP. Let's just say the system did not like that.
We are exploring other options.

System Preference Panes non-functional (some)

I am "fixing" a friends MacBook Pro as a favour, and she's getting exactly what she paid for. It may be a few years old - not sure. It's running Snow Leopard, 10.6.8, but I'm putting it in this more general section because it may not be SL-specific.
A few of the System Preferences panes don't work. A message comes up which simply says "non-functional" or something like that. Specifically, the ones whcih don't work are:
Desktop and ScreenSaver
Spotlight
Energy Saver
Background: she forgot her password, and this is on a computer which was formerly someone else's. I couldn't even get the thing to the login screen, so something else was wrong besides her password, but I had her gray Snow Leopard installation disks, so got through the re-install process, made a new User for myself, as Administrator, and was then delighted to find that all of her data was still intact. I had to add myself in to the permissions on her UserID. I made a new user for her as well, because we still didn't have her own original password, and I looked around but couldn't find it. I copied all of her data over to her new UserID.
I also did all Updates, plus tried a 10.6.8. combo update.
Then I made an error. The former owners UserID was also still there. We couldn't log on as her either, without her password, but I figured that we didn't need that anymore, checked with the current owner first, and deleted the original User (and renamed the computer). I cannot reconstruct in my mind whether the System Preferences panes malfunction occurred before or after deleting the original User.
There is other minor wonkiness, but basically the machine is running and the data has been preserved (and now backed up). But one thing at a time: I've reinstalled the OS a couple of times, without improvement. I tried to upgrade to Mavericks, but after downloading, it told me that this computer could not be upgraded (without saying why not).
I haven't found any plist files which look relevant. I did more 2 of them out of HD-Library-Preferences, without any effect, so put them back. I find the Preference Panes in System-Library-PreferencePanes, but didn't see anything to do about that. The offending panes look like they're at least present.
Is there something simple I'm missing? Can I get those panes back?
Thank you.
Charles

Macbook pros need to be at least 2009 for 13" and 2007 for 15" and 17" to run Mavericks. see system requiements.
At this point, the easiest solution will be to make your backups current, then wipe the drive and do a clean install of the system. That means more work reinstalling the backed-up data (you only want to restore data and third-party apps, not any of the system components), but it makes sure you get a clean, working copy of the system.

Home Page Search Is Non-Functional / Not Possible to Restore Previous Session

After the latest update (to version 29), Firefox's default home page search bar has been completely non-functional. Whether I type enter or press Search, nothing happens. Another (possibly related) problem is that the "Restore Previous Session" button is never present. I also cannot restore the previous session by clicking on the History option (it is always greyed out).

I had this and other problems with v29. But after a while everything was working
again, I hope. BTW; 
I found that after Firefox v29, a LOT of my settings and add-ons were changed /
reset. Try this;
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; 
'''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''.
Check ALL of your setting. Then restart.

Wired interface non-functional

So I have a most unusual problem with a mac mini server that is driving me banana's that I hope someone in the Apple community has run into, and found a decent solution..
The mac mini (2.3GHz quad core i7, late 2012) is running 10.9 and server 3.0.1. I did an upgrade from 10.8 (and whatever the previous version server was)..
Since then the wired ethernet interface (en0) literally stopped working. (Links up, but no connectivity.. no ping, it does not even send an ARP)
Data points about the problem.
- It worked flawlessly up until the upgrade to 10.9.
- wireless interface is still fine, static or dhcp.
- The IP is statically configured via System preferences - Network.
- ifconfig in terminal show NO IPADDRESS assigned to the interface.
- if I reconfigure the interface to DHCP, it will not receive an IP and ends up with an APIPA address..
- if I go into terminal and 'ifconfig en0 down' then 'ifconfig en0 <IP> up' the interface works again until restart. It will also correctly display the IP in terminal.
- If I reset, it goes back into this same state (network preferences shows proper config, ifconfig does not, and the interface is non functional)
- If I then go to cli, and manually ifconfig down then up, all is good again.. Doing so from system prefs has no affect..
Here is where it gets really interesting, and why I am convinced this is a software issue.. I did a clean install of 10.9 and Server on an external USB disk, and things work exactly as expected if I boot from that Volume.. If I boot from the internal drive, Its in the broken state again..
This absolutelty tells me its some kind of software issue, and I am out of ideas short of wiping the internal drive, and reloading all the data from scratch..
Anyone else run into this? If yes, were you able to fix it without wiping/reloading?

First, thank you for taking the time to respond and offering great ideas..
I'd delete the interface & recreate it.
In 'System Preferences > Network tab' select the ethernet, click the - button. Then add it again. Reboot & see if it has any effect.
- Had no affect.. More accurately, it works the same as doing ifconfig down/up in cli, where the interface will work again until the next reboot.
See what appears in Console (Spotlight search for it) in the 'All messages" section when you remove connect the ethernet.
- Log messages are below.. Interestingly, I do not get the failure messages that I have highlighted in red on another machine that is is also running 10.9, with server loaded.
11/23/13 10:14:36.000 AM kernel[0]: AppleBCM5701Ethernet [en0]: Link down (womp disabled, proxy idle)
11/23/13 10:14:37.135 AM configd[24]: network changed: v4(en1:10.1.10.10, en0-:10.10.10.1) DNS Proxy SMB
11/23/13 10:14:52.000 AM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, EEE enabled, Debug [796d,0301,0de1,0300,cde1,7c00]
11/23/13 10:14:52.418 AM configd[24]: arp_client_transmit(en0) failed, Device not configured (6)
11/23/13 10:14:52.419 AM configd[24]: MANUAL en0: arp probe failed, arp_client_transmit(en0) failed, Device not configured (6)
11/23/13 10:14:56.501 AM ServerEventsDaemon[221]: NetworkConfiguration: Handling network change.
Have you tried changing the port on the switch it is connected to?
- Yes, for ease of testing I have it plugged directly into my MacBook Pro (I also tried new cable first )
Does safe mode have any effect?
- No, Same results.
Again, booting the machine from a clean install on a USB disk, does not show the issue.. I’ve got a lot of data on the machine, so I am doing anything I can to avoid wiping and reloading it all.. Ive added the output of etrecheck, in case its of any help.
Hardware Information:
 Mac mini (Late 2012)
 Mac mini - model: Macmini6,2
 1 2.3 GHz Intel Core i7 CPU: 4 cores
 16 GB RAM
Video Information:
 Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
 BluetoothAudioPlugIn: Version: 1.0
 AirPlay: Version: 1.9
 AppleAVBAudio: Version: 2.0.0
 iSightAudio: Version: 7.7.3
Startup Items:
 ChmodBPF - Path: /Library/StartupItems/ChmodBPF
System Software:
 OS X 10.9 (13A603) - Uptime: 0 days 0:4:7
Disk Information:
 APPLE HDD HTS541010A9E662 disk0 : (1 TB)
 EFI (disk0s1) <not mounted>: 209.7 MB
 Macintosh HD (disk0s2) /: 999.35 GB (928.22 GB free)
 Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
 Apple Inc. BRCM20702 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple, Inc. IR Receiver
 Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
 Dell Dell USB Keyboard
FireWire Information:
Thunderbolt Information:
 Apple Inc. thunderbolt_bus
Kernel Extensions:
 com.logmein.driver.LogMeInSoundDriver (1.0.2)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
 [loaded] com.adobe.fpsaud.plist
 [loaded] com.enterasys.NacAgent.plist
 [loaded] com.google.keystone.daemon.plist
 [not loaded] com.logmein.logmeinblanker.plist
 [loaded] com.logmein.logmeinserver.plist
 [loaded] com.logmein.raupdate.plist
 [loaded] com.parallels.desktop.launchdaemon.plist
 [loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
 [loaded] com.google.keystone.agent.plist
 [failed] com.logmein.LMILaunchAgentFixer.plist
 [loaded] com.logmein.logmeingui.plist
 [loaded] com.logmein.logmeinguiagent.plist
 [not loaded] com.logmein.logmeinguiagentatlogin.plist
 [loaded] com.parallels.desktop.launch.plist
 [loaded] com.parallels.DesktopControlAgent.plist
 [loaded] com.parallels.vm.prl_pcproxy.plist
 [loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
User Login Items:
 iTunesHelper
 smcFanControl
 Dropbox
3rd Party Preference Panes:
 Flash Player
Internet Plug-ins:
 Default Browser.plugin
 Flash Player.plugin
 FlashPlayer-10.6.plugin
 googletalkbrowserplugin.plugin
 LogMeIn.plugin
 LogMeInSafari32.plugin
 npgtpo3dautoplugin.plugin
 o1dbrowserplugin.plugin
 QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
 None
Time Machine:
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 999.35 GB Disk used: 71.13 GB
 Destinations:
 Backups [Network] (Last used)
 Total size: 999.18 GB
 Total number of backups: 14
 Oldest backup: 2013-11-23 01:19:19 +0000
 Last backup: 2013-11-23 14:59:37 +0000
 Size of backup disk: Adequate
 Backup size 999.18 GB > (Disk used 71.13 GB X 3)
 Time Machine details may not be accurate.
 All volumes being backed up may not be listed.
Top Processes by CPU:
 9% 35FC0000
 3% mds
 3% WindowServer
 2% 36000080
 1% syncdefaultsd
 1% EtreCheck
 1% postgres: caldav postgres [local] startup
 1% fontd
 0% SubmitDiagInfo
 0% prl_disp_service
Top Processes by Memory:
 147 MB com.apple.IconServicesAgent
 82 MB Dropbox
 82 MB com.apple.WebKit.WebContent
 82 MB Safari
 82 MB Finder
 66 MB mds_stores
 66 MB CalendarAgent
 66 MB CalendarServer 5.1 (Apple Calendar Server 21.17.39) [Agent]
 49 MB mds
 49 MB soagent
Virtual Memory Statistics:
 11.80 GB Free RAM
 2.69 GB Active RAM
 436 MB Inactive RAM
 1.08 GB Wired RAM
 258 MB Page-ins
 0 B Page-outs

I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

TV-Out feature in Nokia Phones

Hello,
I was about to buy Nokia N79 or Nokia 5800 Xpress Music, and came to know that the TV out feature has been removed from most of the Nokia phones except higher end ones.
I was in despair because this feature was really a important for me and made me shortlist aforesaid two devices that were in my budget.
I searched and found out that this is due to shortage of some hardware components....!!!!
So, I wanted to know that whether TV-Out function has permanently been removed or it will again be available when the necessare hardware components are available?????
Any idaes how much time should I need to wait for this feature to come back again???
..thanks n regards-----
nabs

HI That small sticker is the only hint to the problem, Nokia careline did not even know about the problem, we have been ripped off plain and simple. I will never support Nokia in my life again and know of quite a few people who will not either, It is disgusting to get an answer like the one below from such a big company.
Imagine the next car you buy and in an accident the airbags dont deploy because they were not fitted due to a power failure. or your spare wheel is missing or the radio does not work. And then oh sorry we put some stupid little sticker under the dashboard where you cant see it. Go to hell Nokia, I will support cheep chinese knockoffs and copies of your product rather than spend my money on your ^%$ again. I am sick and tired of being ripped off by big business.
What are people going to do if there phones need replacing due to damage/failure/theft etc. absolutely disgusting Nokia
Dear Lindsay,
Thank you for emailing Nokia Careline.
Due to a severe power-outage in our sub-supplier’s factory, we are
experiencing a shortage with a TV-out component in August, 2009. As a
result, this component shortage will affect a limited number of devices
during this manufacturing period.
We are currently looking into ways with which we can minimize the effect on
devices and ensure seamless deliveries. However, there is a possibility that
certain products in the Live and Connect categories will experience changes
in terms of functionality (TV-out not available) and sales package contents
(TV-out cable not included in variants that regularly would contain one)
during this manufacturing period. For the most part, the key features in
these devices are not related to the TV-out functionality.
We will inform consumers about the missing feature with a sticker on the
sales package and a leaflet inside the sales package. Individuals who wish
to ensure that their model supports TV-out feature should check the sales
package. Those without the sticker or leaflet will continue to offer the
feature. We expect that relevant sales packages delivered to the channel in
September will all have the feature.
Customer satisfaction and product quality are very important to Nokia and we
take all quality and customer satisfaction-related issues seriously.
Should you require any further assistance, please do not hesitate to contact
the Nokia Careline on 08611-66-542, between 9am and 6pm (local time),
Monday - Saturday. For online assistance, please visit
http://www.nokia.com/mea/contactus.
“Keep your phone software up-to-date by using the Nokia Software Updater.
For more details visit Nokia Support and software at
http://mea.nokia.com/support#. You can also go online to find user guides,
troubleshooting support and other services to help you use your Nokia
product”
Kind regards,
Tony O’Ryan
Nokia Careline
Nokia Middle East & Africa
Message Edited by lkluyts on 25-Nov-2009 01:33 PM

GPS non-functional on out of box Nokia E90 in Indi...

Similar Messages

Maybe you are looking for