GR slip print issue,

Hi Friends,
I have configured the system and confirmed all setting is correct for printing of GR for production order through CO11N and GR for PO.
Done setting for print parameter at Ctype/Plant/SLoc/user Grp in OMJ4.
Assigned ND9=user grp and NDR=X in user profile.
1. for GR print aginst PO did setting - Ctype WE01/plant/SLoc/user grp = Printer1
2.For GR print for production order setting- CType WF01 /plant /SLoc /user grp =printer 2.
Now after all above setting user is able to print 2/3 printout and than printer stop to working. After removing ND9= user parameter from user profile GR for PO print on printer1.
It's very strange, please help me to find what causing this problem.

Any Inputs?

Similar Messages

GR slip printting issue in TC migo.

Hi All,
i'm trying to setup printer, i have done all setting but still i'm unable to get the GR Reciepts printout in MIGO. any body can help me please.
khan

Pls check the below settings for material document Print out:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

Pick slip print issue

Hi
Weight / Volume not reflecting correctly in Pickslips ?However in Material (MARA table) its showing correct..
Plz guide me..
thanks in advance
mahesh

i want to give some input
Only data is updating into MARA..
while Scheduling agreement created long day back with those material..
Now wtever the input is there in Scheduling agrrement doc the same value is updating into replenishment delivery like gross wt, net wt, and volume..
so plz help me wt shud be done for updation of rectified mater data updation into scheduling agreement docs..
be Scheduling aggrenebt docs ahve n no. of material..
process flow is : ME31L-VL04
thanks
mahesh

Can't print to Epson TM-U590 Slip Printer from Report Generation Toolkit with LabVIEW 8.6.1

Hi all,
I have an application that uses the Report Generation Toolkit to print tickets to a docket printer. Usually this works fine - I have 8 existing installations where there are no problems
I'm currently installing the software at a new site that uses an Epson TM-U590 slip printer and I can't for the life of me get printing to work
Using a Standard Report, the Print Report.vi returns error -41002 which indicates it can't find the printer. I've opened up the VI using remote debugging and it does find the printer name correctly with the Query Available Printers.vi. It gets an error code -2147352567 from the Printout node, which then gets replaced with the -41002 error which is reported.
For historical reasons I'm still using LabVIEW 8.6.1 for this project. I'm considering moving to 2011 or 2012 but I've had reliability issues with other parts of the application after attempting to update to a newer LabVIEW version so I'd like to avoid that at this stage.
The application is running on a standard desktop PC with Windows 7. The slip printer works fine if I print to it from Notepad, and my application is happy to print to any other printer, just not the slip printer.
The slip printer is using the LPT port. Previously the docket printers I've used have been USB but I would expect the printer driver to hide this detail from the application...
Any ideas would be much appreciated
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion
Solved!
Go to Solution.

I've managed to sort out the problem, thanks to this KB article: http://digital.ni.com/public.nsf/allkb/67D60209102E2161862568AC0074BF64
I'm now having the same issue with a Star docket printer (a TUP592), this time with another program developed in LabVIEW 2011.
As mentioned in the article, the problem is actually to do with the margin settings rather than the printer name, despite what the error message says
After some experimentation, I've gotten the Star printer to work by setting a large (>14cm) right margin. No idea why this is required as it seems to print right up to the right edge of the paper quite happily, but there you go.
So I haven't defintely fixed the original problem yet as I haven't gotten back to the site, but hopefully this will be of some help to someone else.
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion

Printing issues with HP 310a All in One Printer

I have a new HP 310a. Looks good, fast on text printing, but features such as merged envelopes and printing letters on A5 stationery do not print correctly; nor in correct order. Photos print larger than they actually are and look like they need to be cropped. Anyone experiencing the same?
Photo tray has nothing to hold paper in place (except on sides); and when tray enters printer, the photo paper slips backwards and error message "out of paper" appears.
This is the last time I will buy an HP product

Hi there,
Welcome to the HP Forums!
I understand that your HP F380 has stopped printing in color, and I am happy to help you with this printing issue!
For further assistance, I will need to know the following:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please take a look through this guide. Streaks or Lines in the Printed Image.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Automatic Goods Reciept label printing issue

HI All,
we are facing some issues while printing goods receipt label. Please check below steps which we already performed.
1. Basis team has already set up new printer Q534 in SPAD transaction.
2. Then we maintain printer determination parameter with combination of output type/plant 5055 /storage location 0001/usergroup/ device
3. We maintaned condition record through MN14 for th plant 5055.
so when we post goods receipt then it should go for Automatic label printing. In SP01 we are not able to see any request.
Kindly suggesst if any config is missing.
Also suggest in condition record, do we need to maintain anything under the COMMUNICATION tab.
Regards,
Sanjay

Hi Guys,
Today I created one PO in test system and GR posted then I checked Spool request SP01 but due to this GR posted, it showing the spool request only for GR slip but not for label print.
GR slip print showing correctly because in OMJ3 tcode WA condition type maintained for the plant 5055 and Sloc 0001against the printer Q532
Now I maintained label print condition type ZLBL in Tcode OMJ3 for the plant 5055 and Sloc 0001 against the printer Q534 but after GR posting, the lable print spool request did not generate.
In sp01 we can see only GR slip print request for the printer Q532 not for label print
Kindly suggesst how can we determine the printer (spool request generate) for the label print for the printer Q534
Sanjay

Printing Issues with HP OfficeJet 100 and Windows 8.1

We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.

Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
I would like to make some suggestions that may help. Let me know how it goes!
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP ENVY 100 D410 Printing issues...

I have an HP ENVY 100 that has recently started having printing issues. We recently upgraded to Mountain Lion and had no problems in the upgrade nor have we had any other software that we've changed. The problem seems to be somewhat random and the results are always the same. When commanded to print the printer acts as if it is running out of ink and then distorts the fonts creating vertical lines on the page and skipping rows creating what almost looks like a bar code. It's most peculiar and the only way I can find to solve the issue is to completely restart both my system and the printer. Thinking that I had a driver issue on my Mac I used the utility on the printer to update drivers and none were found. To insure that the problems wasn't isolated to just my machine I tried our laptop as well and it seems to have the same problem. Has anyone had a similar problem?

Hi Talon,
That more liekly related to the software indeed, I would suggest trying the following steps:
Reset the printing system as listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01371980
Open the Applications folder, then Hewlett-Packard and then open the Device Utilities folder, launch the HP Setup Asisistant and follow the steps to reconfigure the device.
If there is no Hewlett-Packard folder simply re-add the printer by clicking the plus button under Print & Scan.
Now try printing and follow for any difference.
If the same persists uninstall any HP Software by following the HP Uninstaller under the Hewlett-Packard folder.
If there is no Hewlett-Packard folder follow the steps listed under Mac OS X 10.6, 10.7, and 10.8 > I used Apple Software Updates to install the product software below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02440673&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=5157536#N1305
Download and isntall the latest Lion Software below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-97934-2 &cc=us&dlc=en&lc=en&os=219&product=4073738&sw_lang=
Once completing the installation click the Apple icon and install any available Software Update.
Shlomi

New airport extreme and printer issues

OK here is the deal
I have the new airport and a hp psc 750 printer. I have a new macbook which can not print on this printer. It will recognize it thru bonjour but will not install the driver - the odd thing is that I have a pc connected directly and a windows based wireless laptop which both are able to print via this airport. I also have an external hard drive that is connected to the airport. All of the computers are able access this drive. So all appears in order except for the macbook-printer issue. I contacted tech support and they claimed driver issue. Anyone have any ideas - I have updated the most recent drivers for this computer and I was able to install this printer via a usb connection. Thanks

There have been a few posts about issues with HP printers working or not working as the case may be through the extreme. I can't remember what they say, but a search for HP in this forum may well help you.
Sorry to be so vague, just thought it might be a start for you.

Printing issue

I just replaced my b/w cartridge which was working for about 10 copies and now trying to print a colored copy and while the color print is fine, the black ink is coming out blurry/smudged. The screen indicates "Print cartridge problem (Black) Refer to device documntatnion to troubleshoot" I took out the cartridge, shook it, put it back in - no luck - help! Thanks

Hi @LYNNHAAG , and welcome to the HP Forums!
I see you're experiencing print issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Need help diagnosing cause of printing issue w/ image distortion

Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- Ian

Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- Ian

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Remote Desktop Connection and printing issues

Hi,
I am using Windows 7 on my desktop and also connected to Windows Server 2008 R2 to run applications in Windows Server. However, I noted there is problem with the printer issues. Sometimes, when I tried to print some documents using applications
in Windows Server with my local printer in my room connected to desktop, it won't work.
Moreover, I need to go to Windows Server, Component Service to restart printer spooler so it will work again. This is a pain.
I also noticed there is about 30 seconds wait to process any document to print.
Unlike if I print documents directly from my local desktop computer running Windows 7 and connected to local printer, it only takes seconds to print.
My desktop is connected to Windows Server 2008 via local area network. I should not expect such a significant delay in printing.
I also wonder why printer spooler needs to be restarted when printer is not working.
Can anyone advise me about this? Can Microsoft looks into this problem and release updates to fix the bug to improve the system?
Thanks
Regards,
Clement

Hi,
Please check if you turn on this settings:
You need to set this up just before you connect. The setting will be saved so that you won't need to change it the next time you connect.
1. Open Remote Desktop Connection by clicking the Start button, clicking
All Programs, clicking Accessories, and then clicking
Remote Desktop Connection.
2.Click Options, and then click the Local Resources
tab.
3.Under Local devices and resources, select the Printers check box.
4.Click Connect to start the session.
Make sure that you select your printer in the Print dialog box each time you print.
Karen Hu
TechNet Community Support

Firmware upgrade?? Printing Issues?? HP Designjet Z6100ps

I have a Designjet purchase as a demo in 1/2008. The last firmware upgrade that is currently installed is GG-GG_9.0.0.4. I am having printing issues where it prints about 4" of my prints from Apogee Printdrive (which comes from a windows computer) and then wants a restart with the firmware error code. Prints from the MAC are fine and will go straight thru. I have tried multiple firmware upgrades (the latest is GG-GG_11_00_00-2_mvl40-x86-opt_B.dmg) and it is all invalid. After a week of trial and error and trying different upgrades from different computers I am at my whits end. We print to the this printer presslayouts to look at before plating for press. Printing Banners from the MAC is no problem. Anyone have any suggestions. And of course, warranty and service is nill.

I am linking you to the the Designjet forums below. Please just repost your question their it will have better chance of getting answered.
Designjet forum

Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
printer installed but print not coming ...
please give me solutions of this problem

go to http://www.hp.com/go/tools may help resolve the issue.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP.

GR slip print issue,

Similar Messages

Maybe you are looking for