GROUP BY via Designer in Interface

Hello,
i want to group same date in a Interface for filling the target datastore.
Is this possiple?
How can i use/fill the
<%=odiRef.getGrpByList( <> , <> )%>
commands?
thanks

There 2 APIs
i) GetGrpByList
<%=odiRef.getGrpByList("group by ", "[EXPRESSION]", " , ", "")%>
ii) GetGrpBy
<%=odiRef.getGrpBy()%>
These 2 statements are automatically computed from the aggregation transformations detected in the mapping expressions.
You must specify on your interface the aggregation transformations:

Similar Messages

I am doing one Labview project. so my project is about design a interface in labview which one collect the data from keithley 2400 via GPIB connection.

i am doing one Labview project. so my project is about design a interface in labview which one collect the data from keithley 2400 via GPIB connection. any suggestion please

Your first task should be to just be able to send commands to the instrument. Do as Dennis suggested and download the drivers for the instrument and get familiar with them. Build up small VIs that do little tasks with those drivers so you can get used to them. Then worry about your main interface.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Problem in designing user interface

Hi
I am new to weblogic workshop.Please guide me regarding designing user interface.I had tried form weblogic help but i wasn't able to do it .I am giving the whole form below .i need to finish it asap,please reply
" REQUESTOR INFORMATION(with black background)
Date Phone no
Requestor Name Phone NO
Alternate contact name
{all text boxes}
WEB APPLICATION INFORMATION(with black background)
Applicatiion name
Description
{text boxes}
environment A() b()
{check boxes}
INFORMATION OWNERS(with black background)
NAME TITLE
1
2
SSO GROUPS(black backgound)
some more fields)
SUBMIT BUTTON
{SHOW BUTTON}
the following fields are hidden ,they get showed only after i press SHOW BUTTON
RECEIVED BY
TICKET NUMBER(any random number generated)
COMPLETED BY
{all text boxes}
Looking forward for a favorable reponse from your side

Maverick
It is not possible to post the codes for your requirement.Also you have not mentioned whether you want to use this web app for portal application or simple web application which will be running on weblogic server.
If you are using portal application
the JSPs will be the part of JPF(Java Page Flow)
If you are using web application
You have to create jsp in weblogic workshop.
You can use weblogic workshop help to do that
Also you can find help on www.edocs.bea.com
Regards
Bishnu

Retrieve Email Group Status via Bulk API Exports

What methods are needed in order to retrieve email group status and subscription date for contacts (alongside contact information) via Bulk API 2.0?
Thank you,
SR.

After further testing you can subscribe two groups but the log message will be misleading. I created a bulk import with 10 contacts to be subscribed to two email groups. The log message indicated that 20 contacts had been subscribed to the first email group. Checking the contacts via the web interface showed that they were properly subscribed to both groups. The count was correct, just the text of the message was overly specific.

How to populate Values in Value Set via API or Interface

Dear frds:
i need to know is there any API or interface available to load thousands of values in particular valueset via API or Interface. I know Dataload is the alternative but i don't want to use that as the data is too much so its not feasible.
waiting for your response
Thanks.

There is no API for fnd_flex_values.
You will have to do a direct table insert (or call FND_FLEX_VALUES_PKG which does nothing but a direct table insert).
Sandeep Gandhi

Error while trying to publish 2013 workflow via designer. Probably a workflow manager backend user account issue?

Hello, I am getting error while publishing the 2013 workflow via designer. Also, under sharepoint designer if I try to delete any workflow then the page just refreshes and the workflow does not get deleted.
I checked the services.msc and found that the workflow backend service was stopped. (this happened as the password of the user under which this serivce was running had changed).
So, the network admin changed the service user to LOCAL SYSTEM and started the service.
Now, the workflow backend service is started. We have run the iisreset also.
However, I am still getting the same error:-
System.IO.InvalidDataException: A response was returned that did not come from the Workflow Manager. Status code = 503:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Service Unavailable</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Service Unavailable</h2>
<hr><p>HTTP Error 503. The service is unavailable.</p>
</BODY></HTML>
Client ActivityId : ee94689c-4e08-b055-fe9c-268d7a94
Please find attached snapshot.
Is the error as a result of the change in service user? Can you tell me what priviledges should the account running the workflow backend service must have?
UPDATE 1:-
We have set the workflow service backend account user as farm admin and also tried to set it to site admin. The service is re-started. Now, for a new web application,
I can delete workflows. However, for existing site, I am not able to delete the existing workflows.. Also, I am not able to publish workflows (present under new and previous sites) and the error is same as described earlier.

Hi Nachiket,
According to your description, my understanding is that you got an error while publishing the 2013 workflow via SharePoint 2013 Designer.
As you have changed the password of this service. Please open IIS and make sure identify of the WorkflowMgmtPool is correct, you can re-type the identify. Then make this pool is started.
Open Services, find Service Bus Message Broker service and Windows Fabric Host Service. Make sure they are running. If not, firstly, start Windows Fabric Host Service, then start Service Bus Message Broker service. If Service Bus Message Broker service is
started, stop and re-start it.
Here are some similar posts for you to take a look at:
http://developers.de/blogs/damir_dobric/archive/2012/10/23/deploying-sharepoint-workflows.aspx
http://developers.de/blogs/damir_dobric/archive/2012/09/18/servicebus-message-broker-service-is-starting-and-starting.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to set a group by clause in ODI interface?

How to set a group by clause in ODI interface?

In ODI, group by method will be triggered automatically when any one of your mapping contains aggregate functions.
Thanks,
Saravanan Rajavel

Unable to edit Distribution Group membership via Outlook (works via ECP).

SITUATION: I am attempting to enable the ability for specified users to edit the membership of Exchange 2010 distribution groups via Outlook 2010. I have configured permissions via RBAC for them to be able to do this by following the instructions and
running the script found here:
http://msexchangeteam.com/archive/2009/11/18/453251.aspx
After running the script, users specified as group managers are able to edit group membership through the ECP. But when they attempt to do so via Outlook, they receive the same message that they would see if the permission to edit group membership
was not enabled:
"Changes to the public group membership cannot be saved. You do not have sufficient permission to perform this operation on this object."
QUESTION: Does anyone have any idea as to why we are still unable to edit group membership via Outlook, when all the permissions appear to be enabled doing so?

Click Start
Collapse this imageExpand this image
, point to All Programs , point to Exchange Server 2010 , and then click
Exchange Management Shell .
At the command prompt, run the following cmdlet:
New-RoleGroup DistributionGroupManagement -Roles "Distribution Groups"
At the command prompt, run the following cmdlet:
Add-RoleGroupMember DistributionGroupManagement -Member <var>UserName</var>
Open Outlook and try to remove from your distribution list those members that you could not remove before

Processing correction via a web interface

Hi
Is the any way that one can process a correction via a web interface instead of the gui version.
Santosh

OK I am using workcenters. When i open an incident via the workcenter it opens up in a web interface and you can process it or if you click on expert mode then that opens up the incident in the gui form. Now I am looking for a way to be able to process a correction via a web interface instead of the standared gui form that it opens up in.

Vi with access via both user interface and external communication

Hi,
Maybe a little bit too general but I'll risk it:
It concerns a project to stear a tensile machine. Data acquisition is relative straightforward via a few analogue and digital channels.
The interaction of the operator with the tensile machine can be done at two levels:
1. Directly via an user interface on the computer next to the machine. Here I would typically use a state machine in combination with event structures.
2. Remotely, via TCP protocol. Here different clients (external program, written in C) should be able to connect to the LabVIEW program and send simple commands such as 'read force', 'write force', 'read status', ...
It is relatively easy to setup a small daemon that accepts TCP connections from multiple clients. Furthermore I would put the commands from the clients into a message queue (using a producer/consumer structure).
I was wondering what the best method is to allow both the user interface and the external clients to stear the machine (e.g. using an event structure to respond to interactions via the user interface, and create user events from the commands of the clients to access the same actions).
Steven
LV8.5

Hi VPS,
one way could be to build your TCP receiver in one while loop and your event structure in another while loop. if you want to send a command from the event structure you can send this over tcp to the TCP receiver.
Another way could be to use a queue or notifier to send the commands from the event structure and the TCP receiver to another while loop which work with the received commands.
Mike

Payload via the message interface

Hi all,
Is it possible to get the payload/log information for the XI message from the table SXMSPMAST via the message interface name ?
Thanks for your help

Nope.
But you can get details from table SXMSPEMAS. I think best would be you can create a view with join on MSGGUID with SXMSPMAST and then you can filter records base on messsage interface name. Field "OB_NAME / IB_NAME" from table SXMSPEMAS indicate outputbound / inbound interface name respectively.
You can find all othe fields here.. Interface Namespace, Communication Party..so on.
Hope this will help.
Nilesh

WLC 5508 Cant get access via the Mgmt Interface

Hello everybody,
i have a wlc 5508 (version 7.0.98.0) , if i'm pinging the service port interface or try to get access via this interface, everythings is fine, but if cant get access via the management interface. (but its pingable)
the crazy thing is, that the LAP joined successful ti the wlc, but the Upgradetool (converting an AP to an LAP) doesnt work, because the tool cant reach the mgmt interface of the wlc.
there are no ACLs, which are blocking the traffic between wlc and my computer
Does anyone has an idea, what i've configured wrong???
regrads,
Rocco

Interface Name                   Port Vlan Id IP Address      Type    Ap Mgr Guest
wlan1                                   1    16       172.16.2.10      Dynamic No     No
management                         1    2        172.16.1.10      Static     Yes    No
wlan2                                   1    220      172.16.3.10   Dynamic No     No
service-port                        N/A N/A      10.75.100.99      Static     No     No
virtual                                N/A N/A      1.1.1.1               Static     No     No
and my Pc is in the 172.16.4 subnet
i have no access to the switch port, where the controller is connected to, but i know that this port permits access to the vlans which are used

Create users via the CLI interface on a SX20

Hi
Are there some who know how to create users via the CLI interface on a SX20. You can do this via the web interface but I have many video installations where I need to create a user account. Therefore, it would be easiest if I can make it through the CLI interface.
Best regards
Jesper

Unless there's a very well hidden command somewhere, then no. As far as I know, this can only be done for the remote supportuser account;
xcommand UserManagement ?
xCommand UserManagement RemoteSupportUser Create
ExpiryDays: <1..31>
xCommand UserManagement RemoteSupportUser Delete
xCommand UserManagement RemoteSupportUser DisablePermanently
Confirm(r): <Yes>
xCommand UserManagement RemoteSupportUser GetState
/jens
Please rate replies and mark question(s) as "answered" if applicable.

Gilson 307 pump which are connected via a system interface module 506C

hello,
I have a master's thesis received the task to control gilson pumps.
Unfortunately I have no experience with LabView.
It is generally possible to steer the pump? I read a lot and it will describe this is not possible. But I have a compoliertes Pogramm and unfortunately can not get the source code and the driver. There you can control the pumps.
Can one of you help. I would be very grateful.
hardware:
three Gilson 307 which are connected via a system interface module 506C. The interface module is connected via an RS232 connection.
LabView 2012
Thank you very much in advance and best regards
Michael

Thanks for the extra comments GerdW.
Perhaps there is someone who wants to help me, in the manual are not the commands available. Even the technicians of Gilson I could not tell from his documentation of the command sets.
many greetings
Michael

Graphic Designer / User-Interface Engineer Job Opening

Title:
Graphic Designer/User-Interface Engineer
Job Qualifications:
- Must be an innovative Graphic Designer/User-Interface
Engineer
- Minimum 4 years experience developing web-based user
interfaces
- Expert knowledge of Adobe graphic design applications such
as Flash, Photoshop, and Illustrator or alike products
- Experience with Adobe Flex and ActionScript3
- Has a proven track record designing and documenting
high-quality user interface designs for web-based applications
- Possesses a strong visual design sense and general design
principles
- Has some background in object-oriented design and
programming
- Able to work effectively from a remote home office
- Has excellent interpersonal and communication skills and
collaborates well in person, online, or on the phone
Job Description:
This position offers an opportunity to work on high-end
graphical design projects building rich Internet applications for
Fortune 500 client companies in industries like financial services,
software and consumer products. As a User-Interface Engineer, you
will be expected to:
• contribute strong leadership through all phases of
development including functional requirements development, UI
design and documentation
• analyze and establish functional requirements and
specifications using feedback from clients and other developers
• apply your visual creativity and functional
experience to design elegant and responsive web user interfaces
with Adobe Flash (Flex expertise desired)
• support other developers to ensure successful
implementation of the designs
• create appropriate documentation during development
Candidates will be expected to provide a portfolio of their
graphical design work in zip files or URL links for review.
- Can be based anywhere in the U.S.
- Up to 25 percent travel time required
- Work on-site and from home
- 3 to 6 month engagement with potential for perm placement
If you are looking for a new exciting opportunity, please
reply with your resume attached to [email protected]. Thank
you for your interest and I look forward to hearing from you soon.
Regards,
Kevin Bakhmutsky

Kevin,
Are you only looking for a Graphic Designer or do you have
other openings that could be filled by a Flex person with a J2EE
background?

GROUP BY via Designer in Interface

Similar Messages

Maybe you are looking for