GTS Activation : Client Wise

Landscape : 1 ECC System (Multiple Clients(10,20,30 and each client corresponds to each business process)
Knowing the fact that Client wise business handling is not recommended.
Case : GTS checks are applicable for Only client 20. Is it possible to restrict the GTS activities for a particular Client.
The document types and and application level configs can be done client wise. What about the GTS BADI activation and other transfer Document activation.
Is there any built in Functionality for client handling or is there any work around.

Hi Devanand,
My Mistake, if I didn't made it more clearer and simpler.
Basically, what I told is that while making connection between GTS system and Feeder system (client 20 in this case), there is something known as mapping in both the system which is also further segregated by Logical systems at both the ends. First understand a scenario where a GTS solution and feeder solution are both located on the same physical system but with different clients. In that ase, these clients acts as the distinguishing factor while connecting both system and nothing happens as per your concern. Even If, there is such a scope, why not you remove the mapping at Feeder system end for non required systems and make the response to follow on with document processing if GTS system is not found or even if there is a GTS block. In this case, there will be no effect of GTS processing on other clients for which there is no mapping and for which ,response settings are done.
Regards,
Aman

Similar Messages

Client wise Color Setting

Dear All,
Is it possible to set client wise setting of SAP Screen.
e.g. there are two client 200,400 then both the client has different color of SAP Scree,
Thanks in advance
Nirav

Nope.. those settings are for the whole system. I don't think you can use different colors for different clients (It will be useful tho.)
Regards
Juan

Monitoring client 000 instead of active client

Issue: Ideally, we would like to monitor the active client but are not given SAP_ALL / SAP_NEW. Hence we end up monitoring client 000 where we get full auth. But does this gives all the info reqd for monitoring and administration?
1. With Solution Manager as the monitoring system, is it ok if we monitor client 000 of the target systems instead of the active client?
We intend to perform BASIS tasks (Perodic tasks such as servers (SM51), processes (SM50), database (DBxx), O/S (ST06), Dumps (ST22), bkg jobs (SM37) and so on)
2. Is there any documentation that shows the difference between monitoring client 000 and the active client.
Please note, we intend to configure BPM in the future, and hence we understand that the active client needs to be monitored.
3. In case we intend to monitor the active client, where can we get the list of auths (roles/profiles) reqd to perform the the above BASIS tasks
It would be great if we could get info on other ways to address this issue.
Thanks in advance

Hi.
I will try to shed some light on your questions.
1 For monitoring purposes client 000 is well suited. There are only a handful of activities that must be performed in the specific client. Example, create background job, start client copy, (look at transactional data). Reading background job logs is client independent (consider to put in the client in the name when you operate mulitple clients).
2 I cannot recall any official document stating difference. There are some information on help.sap.com defining the usage of client 000 and 001.
3 This is as hard to answer as it is to say how long a rope is. It really depends on what activities that is going to take place in the active client. simplest way is to list transactions/tasks that basis needs to perform and create the correct authorization from.
/fredrik

IPV6 DHCP : Active Clients always zero 0

Hello All,
I have configure IPV6 DHCP by using below mentioned configuration, all my LAN PCs are getting IPV6 correctly and internet is also running well.
But if run this command on Router, so it shows Active Clients are always zero 0.
R1# sh ipv6 dhcp pool
DHCPv6 pool: DHCP_POOL
DNS server: 2001:470:ab::cd
Domain name: abc.com
Active clients: 0
R1# sh ipv6 dhcp binding --> also show empty result.
Can anyone please tell me the reason .
MY CONFIGURATION:
ipv6 unicast-routing
ipv6 dhcp pool DHCP_POOL
dns-server 2001:470:ab::cd
domain-name abc.com
interface FastEthernet0/0
no ip address
speed 100
full-duplex
ipv6 address 2400:FC00:ab::/64 eui-64
ipv6 nd prefix 2400:FC00:ab::/64
ipv6 nd other-config-flag
ipv6 dhcp server DHCP_POOL
ipv6 route ::/0 2400:FC00:ab::1
int fa0/0 is directly connected to my LAN Switch.
Regards,

Ok , the problem solved by changing the configuration in this way. Now it is showing Active clients and Bindings.
I will try your method too, to just add ipv6 nd managed-config-flag in my previous config.
But i am still confused which configuratrion is better and which technique to use ??
My previous config was stateless , is my new config is stateful ??
My NEW Configuration:
ipv6 unicast-routing
ipv6 cef
ipv6 dhcp pool DHCP_POOL
address prefix 2400:FC00:ab::/64 lifetime infinite infinite
link-address 2400:FC00:ab::2/64
dns-server 2001:470:ab::cd
domain-name abc.com
interface FastEthernet1/0
no ip address
duplex full
speed 100
ipv6 address 2400:FC00:ab::2/64
ipv6 enable
ipv6 nd managed-config-flag
ipv6 dhcp server DHCP_POOL
ipv6 route ::/0 2400:FC00:ab::1

WAP321 active clients per cluster

Dear Support,
Please give me deatiled information about the "active clients per cluster" parameter of a WAP321 AP.
Datasheet says active clients per cluster = 80, but i find a presentation where this number is 160 (attached). ???
Another question is, What if i have only 5 WAP321 (not the maximum 8pcs) in my cluster?
How much clients can connect to the cluster at the same time? (20 pcs/AP and 50/cluster or 20 pcs/AP and 80/cluster?)
Other qestion: The information exchange between APs on the same cluster happens wired or wirelessly?
(for examlpe automatic channel selection, or when i config a parameter one of the AP, then this is updated on all the other APs)
Best regards,

Hello Sir, Thank you for commenting back. If you would look at the Datasheet again it does confirm what I mentioned here. There are two section: performance mainly deals with the Access Point by itself, Up to 32 connective and 20 recommended. The 80 that you refer to is from the Multi-Access point section from when you have this access point set in a cluster.
Performance
Wireless throughput
Data rate =300 Mbps; actual client throughput will vary.
Recommended user support
Up to 32 connective users, 20 active users
Configuration
Web user interface
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Multi-Access Point Management
Single Point Setup
Yes
Maximum access points per cluster
8
Active clients per cluster
80
As to the the RV router family, if you would like to tell me which problems exactly you are referring to I would be happy to try and address them for you.
Eric Moyers

GTS activated @FI for SPL and Embargo- need resrtictions

Hi All,
We have activated SAP GTS for FI in R/3 system for SPL screening and Embargo check purposes, but there is no restriction for specific company codes.
Right now we are using GTS for Europe alone, so we need FI activation only for Europe company codes. But it is impacting all other company codes, the impact is getting error message while processing payment transctions due to GTS activation.
How do we restrict specific company codes for SPL screening and Embargo check in FI module, is there some config or we need any some user exists.
Please provide your valuable inputs which will help us.
Regards,
Lakshmikanth

Hi Hari,
Thanka for your reply. It is applicable for both master data and transactional data transfer. Already we have master data transfer filter user exit in place. Now we need to develop similar for transactional data.
I have one more question, is SPL and Embargo screening happens for all FI transactions or for few transactions like F110, F111 and FBZ4, please confirm the same?
I think we need to follow same method for Logistics also.
Regards,
Lakshmikanth

How to deactivate an old KMS activated client in VAMT 3.1?

I have been unable to find anything in the application, help or Internet that addresses my question. How do I deactivate a host in VAMT? We're an organization that relies on donated computers so sometimes we churn through them quickly. Do I just simply delete
it from VAMT? Do I just ignore it and the activation will expire when the client doesn't phone in?
I apologize in advance if I missed something obvious on this one.

You can just let it go.
KMS hands out temporary activations to it's clients. There's not much you can to do administer it or manage what is checking in. Honestly, there's real reason to be concerned about it.
KMS is one of those things that you can set and forget. As long as new clients are getting activated and all clients can reactivate within 180 days, you're good.
If you're concerned about presentation, you can definitely remove them from VAMT.
- Chris Ream -
**Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**

AP541N SNMP for Active Clients

I'm hoping to query our AP541N's for the number of active wireless clients.
I've walked the device and searched the MIBs but can't find what I need.
Aironets seem to use "CISCO-DOT11-ASSOCIATION-MIB|cdot11active devices" (1.3.6.1.4.1.9.9.273.1.1.2), but our AP541N's don't respond to this OID.
Do the AP541N's have something similar?
Software image is AP541N-K9-2.0(4).
Thanks in advance - JD

Hi
I'm looking for the exact same thing.. And cannot find it either.
I'd appreciate if someone could find a solution for this.
We have over 15 other APs (1230's, 1252's) and all of them have their clients graphed nicely.. only that ap541n is missing from the graph.
Thank you

Active client at risk shows wrong information

Hello,
I have 12 clients reporting that they are at risk and 8 reporting that FEP is not installed.
Product status says: definitions out of date.
If I look at the server they are all updated and updates get installed.
I have pushed a reinstall of the sccm agent this succeeded but still clients report that the definitions are old.
I have no clue how to proceed from here. Help is very welcome.
Arjan

Yes we use ADR for FEP updates. It is just 12 that dont work 500+ machines work fine. The ADR is configured to run on all client systems collection
The download settings specify download options: download from DP, fallback downnload from DP. Download from Microsoft Updates is off.
Multiple FEP policies are applied. FEP defifintions on servers are all updated.
It looks like the status is the only thing that is wrong.
Nu update errors in the
1. Update (Missing): Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.167.1003.0) (39f639ef-90ce-4c95-856a-7ee2ba8edb21, 200)]LOG]!><time="05:49:22.708-60" date="03-03-2014" component="WUAHandler" context="" type="1" thread="144"
file="cwuahandler.cpp:1483">
<![LOG[2. Update (Missing): Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.167.992.0) (5f8587bb-3e65-4f37-8087-75ec8e38dc4a, 200)]LOG]!><time="05:49:23.083-60" date="03-03-2014" component="WUAHandler" context="" type="1"
thread="144" file="cwuahandler.cpp:1483">
<![LOG[3. Update (Missing): Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.167.981.0) (9d9960a0-6969-4058-b2ad-91160318d9c9, 200)]LOG]!><time="05:49:23.083-60" date="03-03-2014" component="WUAHandler" context="" type="1"
thread="144" file="cwuahandler.cpp:1483">
<![LOG[Async installation of updates started.]LOG]!><time="05:49:23.161-60" date="03-03-2014" component="WUAHandler" context="" type="1" thread="144" file="cwuahandler.cpp:1844">
<![LOG[Update 1 (39f639ef-90ce-4c95-856a-7ee2ba8edb21) finished installing (0x00000000), Reboot Required? No]LOG]!><time="05:49:40.119-60" date="03-03-2014" component="WUAHandler" context="" type="1" thread="3548" file="cwuahandler.cpp:1997">
<![LOG[Update 2 (5f8587bb-3e65-4f37-8087-75ec8e38dc4a) finished installing (0x00000000), Reboot Required? No]LOG]!><time="05:49:40.633-60" date="03-03-2014" component="WUAHandler" context="" type="1" thread="2652" file="cwuahandler.cpp:1997">
<![LOG[Update 3 (9d9960a0-6969-4058-b2ad-91160318d9c9) finished installing (0x00000000), Reboot Required? No]LOG]!><time="05:49:40.867-60" date="03-03-2014" component="WUAHandler" context="" type="1" thread="6388" file="cwuahandler.cpp:1997">
<![LOG[Async install completed.]LOG]!><time="05:49:40.867-60" date="03-03-2014" component="WUAHandler" context="" type="1" thread="6388" file="cwuahandler.cpp:2024">
<![LOG[Installation of updates completed.]LOG]!><time="05:49:40.867-60" date="03-03-2014" component="WUAHandler" context="" type="1" thread="2332" file="cwuahandler.cpp:3898">

Host name not showing up under Active Clients

When I go into my router and check active connections, I can see all host names like "Acer Laptop", "IPhone" etc..., IP and MAC address' that are connected to router. Today, when I was in there looking, I saw an asterisk where host name should be for the TouchPad. (it took me a while to figure out it was the TouchPad) Is there a reason why Host name would not show up?
I have gone into "Device Settings" and set "Name" as "Chucks TouchPad". Is that the host name that should be showing on router?
Thank You for any assistance.
Post relates to: HP TouchPad (WiFi)

Sure is, but it will involve some commandline work. First, you're going to need to install the SDK. You only need the Novacom part of the SDK, but AFAIK there's no seperate download for Windows... you have to get the whole thing. The SDK is available here: https://developer.palm.com/content/resources/develop/sdk_pdk_download.html
Next, you're going to need to enable Developer mode on your TouchPad, here's how to do that:
Start a Just Type search and enter webos20090606
A Developer Mode icon will display, tap it
Tap the toggle switch to turn it On
Leave the password blank and tap Sumbit
Close the Developer Mode app
Now, connect your TouchPad to your computer. Next, you're going to find a file called Novaterm.bat. It's buried in the install directory of the SDK. I don't remember the exact path (I don't use Windows anymore) but it's something like C:\Program Files\Palm SDK\Current\bin (keep digging around for bin folders in the C:\Program Files\Palm SDK path and you'll find it eventually). Doubleclick that to start a nice little terminal app. Choose your TouchPad from the drop down list and click connect.
Now, time for some command line stuff. Run the following commands in the terminal:
mount -o remount,rw /
cd /etc/dhcp
vi dhclient.conf
Press the I key on your keyboard to go into edit mode (this is a Vi specific thing)
Remove the # at the beginning of line 14 and change the andare.fugue.com inside the quotes to whatever you want your TouchPad reporting as. For example: #send host-name "andare.fugue.com"; would become send host-name "RidiusTouchPad";
To save your changes, hit the ESC key (to exit edit mode), then type :wq and hit enter. Note there is a colon in there. Again, this is Vi specific stuff.
sync
mount -o remount,ro /
Once you've done this, disable and re-enable your Wi-Fi and your TouchPad should be reporting a hostname. Kind of a lot of work if you ask me (unless you already have the SDK installed).

JSP and active client information

Hi,
          Does anyone know how to get connected WebLogic Server JSP clients to
          connected users list in WebLogic Console . I tried with normal JNDI
          connection but these connections won't show in console although normal
          Java client connections are shown.
          Thanks,
          Jouni Peltonen


GUI based applications are good but do you think that will it be maintainable and portable?.. Some of the GUI based applications are build on higher Java like 1.5.. i Presume you have the latest and other workstation have only 1.4 or 1.3, this can be n issue on GUI based applications especially on installation on each workstation.

SCCM sql query Client status if active or not

I would like to create an sql report to show if config manager client is active or not, right now I query
v_R_System, for installed client. Any guidance on which table to query for active or not active clients would be helpful.

I had the same question. I found that this query does what I wanted. You can certainly change the number of days since LastHardwareScan.
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.ResourceId in (select SMS_R_System.ResourceID from
SMS_R_System inner join SMS_G_System_WORKSTATION_STATUS on SMS_G_System_WORKSTATION_STATUS.ResourceID = SMS_R_System.ResourceID where DATEDIFF(dd,SMS_G_System_WORKSTATION_STATUS.LastHardwareScan,GetDate()) < 90)
I hope this helps :)

GTS as only Screening Tool

Hi,
I have a list of customers & Vendors. These customers & vendors are created in someother system which is not connected to GTS system.
1. Can i use GTS system as screening tool for these list of customers & vendors with out creating Master data in GTS.
2. If yes, what is the procedure? What format i have to input details?
Please help me to check on this functionaliy in details
Thanks

In GTS7.2, you can use a standard transaction to perform "offline screening." It will read an XML file from a client location (local machine, presentation server), perform SPL screening and capturing the results in an audit file. In GTS8.0, this can be done against an XML file stored on the GTS active directory (so this process can be run in batch mode).
The XML format is used so you can integrate non-SAP systems using web services (if you want this to be more than a manual, or on-demand service). That said, depending on the type of GTS license you have, you need to be sure that it supports the integration of additional systems in this manner.

[SCCM 2012 R2] Cross forest Active Directory Boundaries

Hi All,
What process/component update information (subnets) for already imported AD Site Boundary?
How can I be sure that automatically created Active Directory boundaries from native and cross domains really import/use all subnets from AD Sites? What Log shows verbose information? PowerShell?
Note to Product Group and MVPs who have influence to Product Group:
please add column in Boundaries view to show actual Domain for Active Directory Boundaries (not using Description Column)
please allow to manually create Active Directory Boundaries from not native domains
Regards,

As mentioned, simply type in the site name instead of using the Browse button.
Site lookups are a simple string comparison that occurs when the client submits the content location or site assignment request to the MP.
If you don't have multiple primary sites, site assignment is not anything to worry about because all the clients will belong to the same site.
If you do have multiple primary sites, it gets a bit more complicated depending upon how those multiple sites are broken down client-wise but would most likely come down to not relying on auto-site assignment so this would be N/A anyway.
For content location, the assumption is that the like-named sites are for the same area of connectivity and thus content-location, i.e., DP "assignment", should be the same regardless of domain/forest. If this is not a valid assumption for your
environment, then I would submit that your site naming convention is irrational.
Jason | http://blog.configmgrftw.com | @jasonsandys

Clients getting updates from Primary Site~~~SCCM 2012 R2

Hi Guys,
I have one Primary site and 3 DP, And there are lots of branch and we have enable branch Cache using GP.
But i have observed some of my clients not getting updates from respective DP they are directly coming on primary site for updates. In my environment ADR is running for updates.
My boundaries groups and boundaries correctly configured .
Thanks

boundary active site wise setup...
In client
LocationServices.log DP details not showing .

GTS Activation : Client Wise

Similar Messages

Maybe you are looking for