Have 320n connected to main router issues
I have kind of successfully connected my Wag320n to my main router an Optus Sagem router, they are connected using powerline ethernet adaptors with wireless available on both although I can't access the Wag320n menu wirelessly.
The Wag320n is set up with DHCP of, NAT and firewall of, Static IP address inside the range of the main modem and same subnet, I left the drop down menu at PPOA (not sure about that one if it is the right setting to have), name and password are the same as the main modem for connecting to internet. I have both the modems connected through lan port 4
Now the problem I have is that if I tyr to connect and to the lan port 1 of the Wag320n the led goes red and stays red, I'm guessing this isn't supposed to happen but then I end up with only 2 lan ports to use for tv, media players etc
Can someone please tell me what I am doing wrong?
Thanks in advance
Solved!
Go to Solution.
Hi belveder, better to isolate this first. You may try using different ethernet port or use another cable. Make sure as well that the WAG320N is configured correctly, you can verify the correct settings from your ISP. This link may help you properly cascade the two devices. The red led light is not normal, you should see green to indicate a successful connection. If all fails, updating the firmware will also help. You can follow this link.
Similar Messages
-
My Server appears to have many connections to the router?
When I look at a map of the network on my router, the server appears to have two IP Addresses and many, many connections.
Most things are working okay, but there is a problem resolving domain names. I can RDP to the server with the IP address but not the name on some clients, and likewise I can access folders with 192.168.1.XXX\Folder but not SERVERNAME\Folder.
I have a public static IP address, and the server adapter has a static IPv4 address (I have left IPv6 alone).
any suggestions?Not necessarily.
Essentials does not setup the internal DNS the same way sbs standard does.
So, using domain.remotewebaccess.com, will always resolve to an external IP.
Then it is up to the firewall in the router, whether it will permit a NAT loopback.
You could add a DNS zone for domain.remotewebaccess.com in DNS on the Essentials Server, but im not sure that would be a good idea.
There may be a setting you can change inside your router to allow the traffic to work.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
My Windows PC iTunes doesn't see my two Apple TV2's (in the speaker button in lower right of iTunes), I believe this problem began when my PC's McAfee AV subscription expired. My computer has internet connection thru router and my ATVs have internet connection thru same router so it's not a networking issue. My iPad can see the ATVs but it can't see iTunes so the problem appears to be PC/iTunes related. I turned the PC's firewall off but no joy. I uninstalled the expired McAfee and still no joy. Reboot = no joy. Glass of scotch = no joy. Need help!!
Wanted to add that I turned on Home Sharing w/the same account in iTunes and ATVs. And I've successfully streamed music/photos to my ATVs for over a year.
-
Loss of connection with Belkin router
I have been using a Belkin N450DB router with my Westell modem for over 2 months. Everything was fine until 4 days ago when my router lost connection. I have tried the self heal with the router and the troubleshooting with the modem. I currently have internet with just the modem hooked up but have lost connection 3-4 times this way over the past 4 days. I have no connection with the router connected now. It says wire unplugged. I was thinking it was the router but have found out another DSL customer in my town has the exact same issue and he has a different router. Did Verison reset some security programs that won't allow my router to connect or is Verison DSL having issues we are not aware of in Greenwood, DE? It is just strange that two residences are experiencing the same issues in different areas.
#1 What is the model of that Westell modem?
#2 When you said
Rockinghorserun wrote:
It says wire unplugged.
are you saying that the router says that or are you saying your OS (and Version - for example Windows XP) is saying that?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.
Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement. -
HI! I have a new macbook air but having difficulty connecting to a router if I am about 10 meters away. My iMac, iPad, iPhones and iPods can connect easily. Is there something that I need to configure? I have no issues if I am close to it. Thank you!
Hello, If you are dealing with one of the really thin iMac's that have no superdrive, then the superdrive icon should not appear on the desktop when you plug it in, but when you put in a disk (CD, DVD, etc.) that should appear. If you go into disk utility, and look at superdrive, that should be clickable and not grayed out when you have it plugged in. If this does not show up in disk utility, go to Apple, and ask to speak to their supervisor, speaking to a customer service agent is like talking to a potato, nothing gets done. Good Luck!
-
when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
Below is some info i get about ports.
I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
I still cant see apple tv after i try the DMZ method.
any suggestion ?
These network ports are used by Apple TV for communications on your network.
TCP port 123 is used to communicate with a network time server.
TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
TCP port 80 is used for communicating with podcast servers.
TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
TCP port 53 is used for regular DNS.
These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.
-
Whenever I try to update any apps or download a new one I get the following error message "unable to connect to iTunes". I have reset my iPad and router and also done the same with my iPod but get the same issue.....need some support please?
There are a number of threads from other people reporting the same iTunes connection issue, it looks like there might be a problem at Apple's end - but you could try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works, but it probably won't until Apple's fixed it
-
I have just connected my new apple TV and in the main menu see only two icons: computers and settings. How do I access the rest of the icons (internet, movies etc...) We do not live in the US. The unit has full WiFi access with no problems, I can access ITunes on my laptop via home sharing no problem.
Glad that this solved your problem but if you searh past threads there are a LOT of people with identical problems.
Reading through the threads my take is
There seems to be something awry with wifi chipset. Typical symptoms are initially being able to connect to connect to a Wifi network then the connection is dropped. Then you see just the 'computers' and 'settings' icons on screen
Power off, reset and factory restore doesnt seem to solve it
Occasionally its nearby antenna cables etc causing interference
One report with convincing evidence it was the HDMI cable, swapping to anotehr cable fixed the problem
Plugging in ethernet works, this is purely a wifi issue
Sometimes plugging in ethernet temporararily wakes up the wifi
Many people seem to have exchanged their units only for the same thing to happen to the new unit a few weeks later. Just wondering if its a fomponent fail or heat issue. -
(WRT160N V3 router) Issue connecting to web-based setup page
I am currently having 2 issues with my router. The first issue is the fact that I can not connect to my router's setup page (192.168.1.1). When I type the ip into my browser I get an error saying unable to connect to it. I have an internet connection and can connect to other websites perfectly fine, so the only issue I have is the setup page.
The second problem is my wireless connection. Over the past few days, I have started to experience a major ping increase in online games, and a speedtest (and pingtest) showed an issue with my wireless connection. Download speeds are normally 19-20mbps and upload speeds are normally above 6-7mbps. Recently the speeds have become about .39mbps and 2mbps respectively. Unfortunately because I can not connect to my router's setup page I can not modify any configurations that would allow me to possibly pinpoint the issue with the wireless connection.
tl;dr: Can not connect to my router's setup page in order to modify configuration settings to speed up my wireless connection which has been having issues.
Edit: Hardwired connections to the router are getting about 28mbps download as they should be. These computers also can not connect to the setup page.You'd have to reconfigure your router again.
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
Dont forget to set up the security as well. -
I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning
BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later -
My ipda2, suddendly do not show the Wifi logo in the main screen, so I do not have wifi connection. I can't do any wifi setting
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
Airport Express connected over Wifi to my main router used as an extender
Hello!
My existent home network is designed as follow:
Ground floor - I have a cable modem with Wifi capability (here I have too a Linksys WRT120N. Not solved the poor wifi signal on 2nd floor tough)
First floor - It's there my MacBook Pro that connects to my Wifi properly as all other devices (iphone, ipad etc)
Second floor - No way to get a good Wifi signal
So, I just bought an Airport Express and I`ve been trying to set it up as an extender to improve the Wifi signal on room three. My intention would be to get it located on the room 2 connected over the Wifi to either the main router or Linksys. However it's not working yet. Is that possible to implement it on this way? Any advice to make these gadgets to work all together?
Thanks.
AlexandreFirst of all thanks Tesserax. Let me try to explain what I have at the moment and what I've targeting.
1st level -> a cable modem that's the main router connected to the Internet. At this point I've connected my Linksys (LAN port) to the cable modem (WAN port) in order to try to get the Wifi signal improved to the other levels.
2nd level -> where I leave my MacBook Pro and the Wifi signal at this level from the Linksys is OK
3nd level -> poor Wifi
Having said that, I have the following routers available at home: Cable Modem, Linksys WRT120N, Aiport Express and also a TP-Link WA-281. It seems that all these stuff does not work together tough (:- based on previous answers due compability between all of them.
So, I was trying to connect the Aiport Express to the MacBook on the 2nd level to improve the Wifi signal for the top floor.
Thanks,
Alexandre -
Connecting 2nd router, separate from main router
Hello.. I've been searching the forums for a bit and can't seem to find an answer to this, so I figured I'd start up a thread.. I have A WRT54G connected as the main wireless router in my house. Today I purchased the WRT600N with hopes of connecting it to the same internet connection as the WRT54G but as a completely separate router.. I've spent all day trying to configure it and get a connection with a different IP as the the first router but have yet to accomplish this.. I get to the point where I have a connection to the second router and it has its own IP and everything, but the internet doesn't work.. I was hoping someone could either help me with this or point me in the right direction to find a way of accomplishing this. Any help would be much appreciated. Thanks. Forgot one thing, not sure if it matters though.. The computer that is connected to the first router is a PC running XP Pro and the computer I'm trying to set up on the second router is a Macbook..
Message Edited by Nupy on 04-27-2008 09:24 PMWhat do you mean with "completely separate router"? You cannot completely separate two routers if one hosts the internet connection. The internet connection of the second must run through the first. The LAN of the second can always access the LAN of the first. That's pretty much inevitable with these cheap routers.
Thus, to complete separate two routers/subnets you actually need three routers, one that hosts the internet connection and two connect to the first. Each of those two additional router LANs are then separated as long as the access to the first main router is well secured.
Unless you have very serious reasons to run two subnets I would always recommend a single LAN setup like this.
Other then that I have described possible two router setups here.
If you want to chain the two routers then you have to set them up like this:
1. router
WAN - setup for your internet connection, e.g. PPPoE or DHCP.
LAN IP 192.168.1.1
Subnet mask 255.255.255.0
DHCP server enabled if required.
DHCP server address pool default 192.168.1.100-149
Check the Status tab of the 1. router to make sure that it has a working internet connection. Write down the DNS server addresses you find on the Status page.
2. router
Internet port of the 2. router is connected to a LAN port of the 1. router. You can only make this wired connection AFTER you have configured the second router. Otherwise you may not be able to access the web interface.
WAN - Static IP
WAN IP 192.168.1.2
WAN subnet 255.255.255.0
WAN gateway 192.168.1.1
WAN DNS 1,2,3 enter either 192.168.1.1 or the DNS server addresses from above.
LAN IP address 192.168.2.1
LAN subnet mask 255.255.255.0
DHCP server if required
You have the choice to set the DNS server IP addresses in the DHCP server if you like.
Don't forget to save the settings on the Setup page.
Once you have reconfigured the second router like this you can connect it to the first.
Make sure that the second router is on Gateway mode on the Advanced Routing tab.
This setup will separate the LAN of the second router from the first. This means you cannot access the LAN of the second router from a computer connected to the first router. However, anything connected to the second router is able to connect to anything connected to the first router. This is much all the separation you'll get with these routers. -
I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
It used to work fine, this only seems to have been a problem in recent weeks
Any help or advice would be much appreciated
Thanks
IanIt turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.
Maybe you are looking for
-
How do I delete pages on a sheet in Numbers?
How do I delete pages on a sheet in Numbers? I have 6 pages, and only need 2.
-
After upgrade DVA doesn't show in AdminService Console.
I upgraded our GW2012 system and it went okay; aside from some issues the GWIA. But, anyway, the GW2012 system had a running DVA, and after the upgrade it still works. However, the Admin-Console doesn't know about it. Under "Document Viewer Agent" th
-
Apple TV Not Syncing - Error Suggesting Firewall Port 3869 Issue
I am suddenly having issues syncing my PC iTunes library with my Apple TV. iTunes is giving a message stating that the Apple TV is not responding and that I should confirm that my firewall port 3869 is open. I turned off the firewall for a few moment
-
How to recover deleated notes from the cloud and the ipad?
I have deleated some Notes files from the cloud. How can i reover them?
-
Drivers for windows xp, Dual Booting issue
I have recently purchased a mac Book pro the 13 inch model, it came with lion installed by default this means boot camp only works for 7 So ive partioned my disk using boot camp and installed Xp onto the partioned part of the hd Obviously the issue w