Have a new router, Amped, and now the printer will not print wirelessly from my iMac.

HP Photosmart Premium ePrint Wireless Model C410a.
Mac OS
I just hooked up a new router-Amped. Now the printer will only work with a "wire" and not wirelessly. It worked with my previous NetGear router.
What do I need to do to get it to work?

Your new router is likely using a different subnet than your old router. Go into the printer's wifi settings and make sure it is in the same lan as your router. Follow the printer's wifi set up instaructions.

Similar Messages

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help?

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.

It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam

HT1414 my daughter has iphone 3gs and it required an update , so i connected the iphone to itunes for update and the iphone locked up, I had to reset back to factory settings and now the iphone will not activate , what can i do

My daughter has an iphone 3gs and it required an update. So i connected the iphone to itunes for the update and the iphone locked up . I had to reset the iphone back to factory settings and now the iphone will not activate , Please advise what i can do to get this working for her ?

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743

TS1702 I bought the app Atari greatest hits package for $9.99 and now the app will not even open... Every time I try to open it it closes on its own...any suggestions?

I bought the app Atari greatest hits package for $9.99 and now the app will not even open... Every time I try to open it it closes on its own...any suggestions?

Try deleting it and reinstalling it.
you can also try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds or so until it reboots and see if that helps.

HT6147 i need help, i did the update on my iphone 5s and now the phone will not power on?

hey, i need some help with my iphone 5s, i did the update ios 7.0.6 and now my phone will not power on?? can someone please help me!

Hello ABrosz
If you are not able to get your iPhone to power on, try to reset it by holding the Sleep/wake button and Home button at the same time for about 10 seconds and see if it turns on. Check out the articles below to troubleshoot your iPhone further.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

Recently accepted an itunes update and now the program will not launch or open on my computer

I recently accepted an itunes update on my computer - now the application will not launch or open on my computer. any ideas or help?

A few details would help here. What kind of computer? What operating system is it running? What version of iTunes was running previously? Was there an error during installation? What actually happens when you try to launch iTunes now?
Let us know we will keep working with you.
Best of luck.

HT5457 I have added this latest download to my iPad and now the iPad will not respond

I have updated my iPad with the latest version iOS 6 download and now my iPad only has the Apple icon displayed. I have attempted to to hold both buttons at the same time and the screen bounces a strange lined gray pic for seconds and bounces back to the Apple icon. any ideas why the iPad will not respond?

I have updated my iPad with the latest version iOS 6 download and now my iPad only has the Apple icon displayed. I have attempted to to hold both buttons at the same time and the screen bounces a strange lined gray pic for seconds and bounces back to the Apple icon. any ideas why the iPad will not respond?

I have just done IOS update and now my computer will not recognise I-Phone is there anything I can do?

I have just done the IOS 5 something update on my phone it went to back up and now my computer does not recognise my phone and the phone screen just has the ITunes symbol with an arrow and usb cable on it. Does anyone have ideas of what I can do?

More info for you, I have not had the phone jail broken or anything like that. Please help as my phone has everything on and was fine before I did the update.

Just updated my iPhone 4S to ISO6 and now the phone will not pair with my car(Lexus ) is this an issue with the car firmware or iOS 6?

Just updated my 4s to iSo 6 and now the phone does to pair with my Lexus anyone have/solve this issue? Is it a firmware problem with the car?

Was it pairing before the iOS update?
If so, delete the pairings in the device and the car, then try again.
If it was not, the issue is most likely the car.

HT1918 Somehow the country associated with my account was changed to China. I did not make this change and now the system will not let me update either my credit card information or the country back to the United States. Help!!!

Somehow the country associated with my account was changed to China. I did not make this change. My credit card information needs to be updated but the system will not let me update either my credit card information or the country back to the United States. My updated credit card information is not accepted because the country is China. It will not allow me to change the country until the credit card information is changed. Help!!!

This exact thing has happened to me. Did you get it resolved? If so, how??

I have a new yfi address and now my printer is now working.

I had to get a new yfi modem so got a new address now my wireless printer is not working. I have tryed unpluging it but it is still not working. What do I do.?

If you've had a new modem installed, the wifi password has probably changed.
For wireless printing work, you'll need to have both your printer and device connected to the same wifi netork so that will mean entering the new network password on both your printer and device that you are printing from.
The password is often somewhere on the modem/router or with the documentation supplied by your internet service provider.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

TS1702 I have a iPhone which I purchased first. I put my email address as my apple ID. I have just purchased an iPad and add my other email address as the apple ID by mistake and now the photos will not stream between each device. I have tried to change t

I have an iPhone which I added my email address as my apple ID. I have just purchased an iPad which I add my other email address by mistake and now I am unable to stream my photographs. I have tried to change my email on both devises but with out luck as it won't reconise my pass word. Any ideas

Settings>iTunes & App Stores>Tap the ID and sign out. Then sign in with your other ID.
If this isn't working, restart the iPad - AFTER you sign out of the ID and then sign in with the correct ID after the iPad restarts.
There is no reason why you should not be able to sign in with the ID that you are using on the iPhone and use that passord with that ID on the iPad.

HT201413 I recently was sold a Iphone 4 (Via Ebay), but the phone was shipped to me with a standing pass-code on it, and now the seller will not return any forms of contact to me. What can I do, I have tried recovery mode - restore, but I get same error m

The Iphone "Iphone" could not be restored. This device isn't eligible for the requested build. Then I am given the option to click "More Information", or Ok. I have followed all of the necessary steps, but I haven't had in suecessful trials. Will someone PLEASE help, I am REALLY ready to use my fricken 280 Dollar Iphone! Lol. Thanks.

Bad news: It sounds as if you were sold a jailbroken iPhone.
Good news: File a SNAD with eBay. Make sure all your correspondence has been through eBay Messaging. The fact that the seller has been ignoring you will not sit well with them.
You will get 100% of your money back, including shipping. Paypal will simply seize his funds and return what is yours.
Lesson: Don't buy a used iPhone.
It's much worse for the seller. His PayPal and eBay accounts will be frozen. Until he squares up with both you and eBay, he's out of money and out of business.

Just tried to upgrade to SnowLeopard with new software. iLife failed to download and now the computer will not start up--grey screen with lines going round and round in a circle. What can I do to get it to start up?

Just tried to upgrade to SnowLeopard with newly purchased software disc. iLife failed to download and when I tried to restart the computer, it will not do so--just get a grey screen with the lines going around and around. Any ideas about how to get it to start?

Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD

I changed my hard drive and now the software will not update to maverick, i have 10.6.8 now

I used the start up disc to get the software and now i can't update to maverick

Does your MacBook Pro meet the minimum hardware requirements to be able to install OS X 10.9 Mavericks.
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space

Have a new router, Amped, and now the printer will not print wirelessly from my iMac.

Similar Messages

Maybe you are looking for