Have C4795 Photosmart printer. When printing 4X6 photos , the print starts halfway across the paper

When printing 4 X 6 photos on C4795, printing starts halfway across the paper, leaving
a half-page of blank. How do I realign to correct this?
Thanks, John

Binary Zen - thanks for your reply. I'm using iPhoto on a brand new iMac. Just upgraded from an iMac G5 that I've been using
for 6 years. So, new software. Also new printer, to me, just set up on wireless network. I had successfully printed photos on this printer using my old iMac, but the new iPhoto software is different, and doesn't seem to give me some of the print options I'm used to, such as selecting 'draft' for quick and dirty printing, etc.
One interesting note: I reread the printer manual, which said to slide the left slider against the paper. That moved the start point on the print to about 1" in from the leading edge instead of half-way across the page. Now all I have to do is figure out how to move it over another inch. I'm starting the photo paper exactly on the marks on the paper tray.
Suggestions welcome! Thanks, John

Similar Messages

HT1150 I have two shared printers and I want to be able to select the printer when it is time to print without having to set a default EACH time. Can I just have a prompt to ask me which printer to use???

I have two shared printers and I want to be able to select one printer when it is time to print without having to set a default EACH time. Can I just have a prompt or dialog box that will ask me which printer would you like to use??? The only options I can find are "default" and "Last printer used" which means I must go into the Print & Fax area and change the default EACH time I want to print??? Seems very low tech.....

junnybug wrote:
Can I just have a prompt or dialog box that will ask me which printer would you like to use???
In most cases you get this dialog box every time you print. It is called the print dialog and normally when you print, a print dialog appear showing the printer that is to be used. Which printer you see will be based on what you have set in Print & Fax as you mention. But regardless of what you have set there, you still have the option to change the printer via the print dialog.
If you are using an application that does not show the print dialog, like MS Word and that stupid "print one copy" print icon in the toolbar, then you can often change the action the print icon uses so that the print dialog appears.

I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

If there isn't a Page Setup in the Print Dialog, open Text Edit>Edit>Page Setup, check borders there or use Custom Page setup & save.

I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser, some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

I have same problem. I could only see a fraction of my project photos if I browse the Aperture lbrary. It is the same problem when I sync the aperture photos to my iPhone or iPad. I still cannot solve it but I know a way to go around it for your iMovie to see the pictures so that you can work on your iMovie.
Here is the work around:
Export the photos from your album to your hard disk and re-import into your iPhoto. Now you should be able to see those photos that you want to work on in iMovie when you browse your iPhot library.

I just upgraded my old versionj 3 of photoshop elements to v13 when I import photos they are not imported in the same order they are mixeds up

hi can I have a reply to above question: I just upgraded my old versionj 3 of photoshop elements to v13 when I import photos they are not imported in the same order they are mixeds up

In the documents screen - sorry, new to this so not sure if that's the right terminology... Basically the screen showing all documents, if you drag down, there should be two options at the of of the page: Date and Name. Select Name and your list should now be in alphabetic order.
Hope that helps.

When I email photos from iphoto(9.2.2) the recipients are unable to open the jpegs - why?

When I email photos from iphoto (9.2.2) the recepients are unable to open the files, and command I tells me they are locked-
How and where do I unlock them?

You can't unlock files on their machines.
iPhoto sends HTML emails and not every email application (or user) knows how to work with these.
Send Plain text emails via Mail instead. That's pretty foolproof.

HT1199 I have a 3.2 GHz Intel Core i3, 27 inch, Mid 2010. It used to run fast but now it seems to have slowed down like when surfing or opening applications. I downloaded all the updates restarted but it seem slow. How do I speed it up? Thanks

I have a 3.2 GHz Intel Core i3, 27 inch, Mid 2010. It used to run fast but now it seems to have slowed down like when surfing or opening applications. I downloaded all the updates restarted but it still seem slow. How do I speed it up? Thanks - ManongCA

Activity Monitor – Monitor Performance Problems
Why is my computer slow
Why your Mac runs slower than it should
Things you can do to resolve slowdowns see post by Kappy

When I try to use Firefox Browser on my Samsung Note 3, the screen comes up white after the orange bar runs across the top. It worked yesterday.

March, 9th, 2015 -- My Samsung Note 3 is on AT&T wireless, but I Have Xfinity wi-fi at home. Firefox browser worked yesterday & last night. Today when I search it comes up with a blank white screen after the orange bar runs across the top & never loads anything (words or pictures). When I open the tabs in the side bar, it shows the pictures for them, but still only loads a white page after clicking actual link. It will not sync the last few saved bookmarks with my computer. I made sure that I have the latest android version installed, but It still does this even after uninstalling & re-installing & restarting the phone. AT&T had an update a couple of days ago & I've already talked with their tech support with no resolution. I don't know if there is conflict with AT&T's update & current Android Firefox browser. Please Fix, thank you.

Yes, it does the same thing whether on wi-fi or 4G.

My MacBook Pro gets really hot when I open a video file of any kind and the video starts lagging and the image fades away, also with anything that starts the fan. Is extremely hot on the left upper corner. Is there something I can do about it?

My MacBook Pro gets really hot when I open a video file of any kind and the video starts lagging and the image fades away, also with anything that starts the fan. Is extremely hot on the left upper corner. Is there something I can do about it?

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

How do I go back to my original blog design when after I upgraded firefox my top border changed to go only halfway across the page and a line now runs down the middle of my blog? Not on other computers, just mine.

I would just like my blog to return to its original format with no line down the middle of the page and the top border going across the entire page not just halfway. This happened immediately after I upgraded to Firefox 6. My blog's format is normal on other computers but not normal on my computer. Thank you.

Can you attach a screenshot and maybe post a link?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting "none" as a (too) high value can cause issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text.

When i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place

when i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place it did before i turned the engine off

It could be that the CD player will only playback "Redbook" CD's from the previous position.
And starts mp3 type CD's from the beginnig.
However.. it's not Logic related.
pancenter-

Hi! I just joined the creative cloud. As a photographer I would like to download photoshop and lightroom. When I try to do this, before the download starts, I get the message: 'we are experiencing some problems, please try later'. I've tried multiple time

Hi! I just joined the creative cloud. As a photographer I would like to download photoshop and lightroom. When I try to do this, before the download starts, I get the message: 'we are experiencing some problems, please try later'. I've tried multiple times for the last 3 days but no change... Any ideas?

Michelmolder please try utilizing a different web browser. If you continue to experience difficulties then I would recommend reviewing Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install Photoshop and Lightroom directly through the Creative Cloud Desktop application.

Why do 4x6 photos not print from computer on 7520 HP printer

In settings I changed it to 4x6 photo paper and set it at that default. Then when I want to print from the 4x6 tray it tells me the tray is empty meaning the 8x11 tray is empty, which should be empty. It should switch to the 4x6 tray but it does not do that so therefore I can not print 4x6 photos. What else can I do? Am I missing something?

I found the answer to my own problem. Leave the paper in the bottom tray as well when one puts photo paper in the 4x6 tray. That is the reason it tells me my tray is empty when in fact the bottom 8x11 tray should have paper in it as well. Only the Settings need to be changed for 4x6 photo paper and then change it back to the 8x11 to letter paper.

4x6 photos are printing orange??

I've designed a 4x6 xmas card on your Creatre site and I'm using photo plus paper from HP and the cards keep coming out entirely orange. What's up?

Hi there,
I could use a little more information to help narrow troubleshooting. Specifically what operating system are you using and what is the model number for the printer? If you have difficulty locating the model number please use one of these guides to get it:
Deskjets
http://goo.gl/fyTXF
Envy Series
http://goo.gl/Ti0c8
LaserJets
http://goo.gl/ZfeqA
Officejets
http://goo.gl/9SVll
Photosmarts
http://goo.gl/Ti0c8
PSC
http://goo.gl/9SVll
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Exported Jpeg's when sent to photo lab print too dark

I have had consistent results with exported jpeg images that look fine on my monitor (as raw files)and show in the histogram in lightroom 2.5 as the highlights just starting to clip as printing too dark when sent to a photo lab in SRGB. Is this a fault of my monitor? I have calibrated the monitor, a Dell S2409W, using charts on the website at http://www.normankoren.com/makingfineprints1A.html but this still happens. Will darkening the Monitor help or will the images still clip at the same point? I have been able to send a second image with the exposure and or brightness boosted a bit and they print brighter, but this is a pain. What is the best way to correct this so that I can see the same image as I get back from the lab?

hello henrykipson,
you said that you want starting an professional laboratory business,i can talking about this because i had a laboratory until some years ago .i hope that you made some artistic study,so it's more easy for you to learn this topic.you must study,an pass an examination for take an artigianal licence that allow you to open this activity ,the licence given you the opportunity to work either for sale photografic material either to shoot and developing,one time that you had pass this examination you must gone to the police autority and inform these of your business (is under police control.because you work with chemical material,and also because you had a reservate people information,and they must given you their assent.)after all you can start to buy a good developer and print machine beyond to have a dark room.for manual print.you must decided if do you want work in black and white or color.You can do both but is better to specialize by one of them ,like you want.
Remember from the digital events many people print his image at home,you must deciding maybe is better to work with a professional photographer,that can given you more work.itsn't easy.you must have a good preparation because ,they are more exigent.The good results depend also from the quality of your works.a good machine,good chemical product,good upkeep,of your laboratory.(in italy this is the procedure,i think also in other country,because is a ticklish question licence.)I hope that this my little explanation are useful to you.Good luck .
cheers alessandra minotti

Have C4795 Photosmart printer. When printing 4X6 photos , the print starts halfway across the paper

Similar Messages

Maybe you are looking for