Health Check on 11.5.9
Hi Friends,
I want to do Health check on my E-Business suite 11.5.9(both Database and Application) please suggest how to do?
Regards,
Arun
Hi,
Hi Arun,
You can refer the following ML doc,
[Oracle Application Object Library Best Practices: E-Business Suite Diagnostic Tests Health Check Test|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=471667.1]
Thanks,
Anchorage :)Do NOT use this document and install the script since it is for R12 (you are on 11.5.9).
Regards,
Hussein
Similar Messages
-
How can I support a health check, from a load balancer?
My company has load balancers which use health checks to determine if the end point is available for client traffic. The basic health check is a tcp ping, and will tell you if the device is on the network. The next level of health check is an http request. This request, and the response are static, you can’t create your own version of the request and response. The standard request is this:
http://host:port/healthcheck/hc.html
The standard response is this:
“The server is available”
I want to use the load balancer as part of my total deployment. The problem is that I am not seeing how to support this health check request and response in the MDEX engine. What I see is this request
http://host:port/admin?op=ping
Will return this response
dgraph <host>: <port> responding at <day month year time>
It is nice that there is a built in ping, but I am not able to make use of it. I am new to Endeca and still poking around. The dgraph process listens on a port set up in <…>/config/script/AppContext.xml
<dgraph id="Dgraph1" host-id="MDEXHost" port="3281">
<properties>
<property name="restartGroup" value="A" />
<property name="updateGroup" value="a" />
</properties>
<log-dir>./logs/dgraphs/Dgraph1</log-dir>
<input-dir>./data/dgraphs/Dgraph1/dgraph_input</input-dir>
<update-dir>./data/dgraphs/Dgraph1/dgraph_input/updates</update-dir>
</dgraph>
(I am not using the default port, as I only have an instance on a shared server and have to worry about port clashing. But that is a different thread.)
In a standard tc Server install I can support this health check by doing this:
* Create a directory named “healthcheck”, in the “webapps” directory.
* Place a file name “hc.html” in that directory, which contains “The server is available”
The one hack which comes to mind is to write a servlet which would be able to be a smart proxy for the load balancer health check. It would pass along any regular traffic to the MDEX engine. But if the request was a health check it would send “admin?op=ping” to the MDEX engine, and for a good response from the engine, create and pass back the correct response to the load balancer.
Ideas, comments, flames, …
ThanksHi, we are using following String to test the MDEX ping response but we get the invalid version formation on dgraph.log -
following is on F5
GET /admin?op=ping HTTP/1.1/r/nHost:myhost.endeca.com:19000/r/nConnection:close/r/n/r/n
Following gets logged on Dgraph.log
WARN 09/05/12 05:30:03.799 UTC (1346823003799) DGRAPH {dgraph} Invalid version format in 'HTTP/1.1/r/nHost:myhost.endeca.com:19000/r/nConnection:close/r/n/r/n'
Please let me know - if you have any suggestions to solve this issue.
I know that it works from browser and wget from unix with following commands.
wget http://myhost.endeca.com:19000/admin?op=ping - from unix command line
from browser:
http://myhost.endeca.com:19000/admin?op=ping
Thanks,
Ram -
Health Check in Exchange 2007 Scripting
Hi All,
I have been looking around for scripts which would help me perform regularised health checks in my enviornment. After lot of googling i was able to get a script which would meet my requirements. However i have a few challenges involved in extracting some
more information:
1. Mailbox Store Size, Free Diskspace percentage for mailbox servers
2. Remote Mail flow Tests & Mailflow test to every exchange 2007 mailbox servers in org.
3. Automating Email of collected data (in HTML) to Administrator.
4. Executing the script Automatically without triggering it from Exchange Management Shell.
Script Below
param( [string] $auditlist)
Function Get-CustomHTML ($Header){
$Report = @"
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd">
<html><head><title>$($Header)</title>
<META http-equiv=Content-Type content='text/html; charset=windows-1252'>
<meta name="save" content="history">
<style type="text/css">
DIV .expando {DISPLAY: block; FONT-WEIGHT: normal; FONT-SIZE: 8pt; RIGHT: 8px; COLOR: #ffffff; FONT-FAMILY: Arial; POSITION: absolute; TEXT-DECORATION: underline}
TABLE {TABLE-LAYOUT: fixed; FONT-SIZE: 100%; WIDTH: 100%}
*{margin:0}
.dspcont { display:none; BORDER-RIGHT: #B1BABF 1px solid; BORDER-TOP: #B1BABF 1px solid; PADDING-LEFT: 16px; FONT-SIZE: 8pt;MARGIN-BOTTOM: -1px; PADDING-BOTTOM: 5px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; WIDTH: 95%; COLOR: #000000; MARGIN-RIGHT:
0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; BACKGROUND-COLOR: #f9f9f9}
.filler {BORDER-RIGHT: medium none; BORDER-TOP: medium none; DISPLAY: block; BACKGROUND: none transparent scroll repeat 0% 0%; MARGIN-BOTTOM: -1px; FONT: 100%/8px Tahoma; MARGIN-LEFT: 43px; BORDER-LEFT: medium none; COLOR: #ffffff; MARGIN-RIGHT: 0px; PADDING-TOP:
4px; BORDER-BOTTOM: medium none; POSITION: relative}
.save{behavior:url(#default#savehistory);}
.dspcont1{ display:none}
a.dsphead0 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#FFFFFF; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #CC0000}
a.dsphead1 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#ffffff; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #7BA7C7}
a.dsphead2 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#ffffff; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #7BA7C7}
a.dsphead1 span.dspchar{font-family:monospace;font-weight:normal;}
td {VERTICAL-ALIGN: TOP; FONT-FAMILY: Tahoma}
th {VERTICAL-ALIGN: TOP; COLOR: #CC0000; TEXT-ALIGN: left}
BODY {margin-left: 4pt}
BODY {margin-right: 4pt}
BODY {margin-top: 6pt}
</style>
<script type="text/javascript">
function dsp(loc){
if(document.getElementById){
var foc=loc.firstChild;
foc=loc.firstChild.innerHTML?
loc.firstChild:
loc.firstChild.nextSibling;
foc.innerHTML=foc.innerHTML=='hide'?'show':'hide';
foc=loc.parentNode.nextSibling.style?
loc.parentNode.nextSibling:
loc.parentNode.nextSibling.nextSibling;
foc.style.display=foc.style.display=='block'?'none':'block';}}
if(!document.getElementById)
document.write('<style type="text/css">\n'+'.dspcont{display:block;}\n'+ '</style>');
</script>
</head>
<body>
<b><font face="Arial" size="5">$($Header)</font></b><hr size="8" color="#CC0000">
<font face="Arial" size="1"><b>Version 1 |M & C | <A HREF='http://mail.exchange.com'>mail.exchange.com</A></b></font><br>
<font face="Arial" size="1">Report created on $(Get-Date)</font>
<div class="filler"></div>
<div class="filler"></div>
<div class="filler"></div>
<div class="save">
Return $Report
Function Get-CustomHeader0 ($Title){
$Report = @"
<div class="dspcont0">
<h1><a href="javascript:void(0)" class="dsphead0" onclick="dsp(this)">
<span class="expando">show</span>$($Title)</a></h1>
<div class="dspcont0">
Return $Report
Function Get-CustomHeader ($Num, $Title){
$Report = @"
<h2><a href="javascript:void(0)" class="dsphead$($Num)" onclick="dsp(this)">
<span class="expando">show</span>$($Title)</a></h2>
<div class="dspcont">
Return $Report
Function Get-CustomHeaderClose{
$Report = @"
</DIV>
<div class="filler"></div>
Return $Report
Function Get-CustomHeader0Close{
$Report = @"
</DIV>
<div class="filler"></div>
Return $Report
Function Get-CustomHTMLClose{
$Report = @"
</div>
</body>
</html>
Return $Report
Function Get-HTMLTable{
param([array]$Content)
$HTMLTable = $Content | ConvertTo-Html
$HTMLTable = $HTMLTable -replace '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">', ""
$HTMLTable = $HTMLTable -replace '<html xmlns="http://www.w3.org/1999/xhtml">', ""
$HTMLTable = $HTMLTable -replace '<head>', ""
$HTMLTable = $HTMLTable -replace '<title>HTML TABLE</title>', ""
$HTMLTable = $HTMLTable -replace '<', "<"
$HTMLTable = $HTMLTable -replace '>', ">"
$HTMLTable = $HTMLTable -replace '</head><body>', ""
$HTMLTable = $HTMLTable -replace '</body></html>', ""
Return $HTMLTable
Function Get-HTMLLink ($activeURL){
$Report = @"
<a href=$activeURL>$activeURL</a>
Return $Report
Function Get-Ink ([String]$inData){
[String]$inclPercentage = @(35..100)
$positive = ($inclPercentage, 'Success', 'Ready', 'Running', 'OK', 'True', 'Information')
If ($positive -match $inData)
$Report = @"
<font color='#009900'>$inData</font>
Else
$Report = @"
<font color='#FF0000'>$inData</font>
Return $Report
Function Get-HTMLBasic ($Detail){
$Report = @"
<TABLE>
<tr>
<td width='75%'>$($Detail)</td>
</tr>
</TABLE>
Return $Report
Function Get-HTMLDetail ($Heading, $Detail){
$Report = @"
<TABLE>
<tr>
<th width='25%'><b>$Heading</b></font></th>
<td width='75%'>$($Detail)</td>
</tr>
</TABLE>
Return $Report
$input | foreach {$targets += @($_)}
If ((Test-Path variable:\targets) -eq $True){
Write-Host "Server list input detected on pipeline" -ForegroundColor Yellow
Else{
if ($auditlist -eq ""){
Write-Host "No server list specified, getting all Exchange 2007 servers" -ForegroundColor Yellow
$targets = Get-ExchangeServer | Where-Object {$_.IsExchange2007OrLater -eq $True}
else
if ((Test-Path $auditlist) -eq $false)
Write-Host "Invalid server list specified: $auditlist" -ForegroundColor DarkRed
exit
else
Write-Host "Using Audit list: $auditlist" -ForegroundColor Cyan
$Targets = Get-Content $auditlist
$now = Get-Date
#Custom Expressions
$latencyMS = @{Name="Latency(MS)";expression={[Math]::Round(([TimeSpan] $_.Latency).TotalMilliSeconds)}}
$MessageLatencyTime = @{Name="MessageLatencyTime";expression={[Math]::Round(([TimeSpan] $_.Latency).TotalMilliSeconds)}}
$hotLink = @{Name="URL";expression={Get-HTMLLink ($_.URL)}}
$colourResult = @{Name="Result";expression={Get-Ink ($_.Result)}}
$colourStatus = @{Name="Status";expression={Get-Ink ($_.Status)}}
$colourType = @{Name="Status";expression={Get-Ink ($_.Type)}}
$newResult = @{Name="Result";expression={If ($_.Result.ToString() -ne 'Success'){Get-Ink ('Failure')} Else {Get-Ink ('Success') }}}
$fullReport = Get-CustomHTML "Exchange 2007 "
$fullReport += Get-CustomHTMLClose
Foreach ($Target in $Targets){
Write-Host "Collating Detail for $Target" -ForegroundColor Yellow
Write-Host "..getting basic computer configuration"
$ComputerSystem = Get-WmiObject -computername $Target Win32_ComputerSystem
switch ($ComputerSystem.DomainRole){
0 { $ComputerRole = "Standalone Workstation" }
1 { $ComputerRole = "Member Workstation" }
2 { $ComputerRole = "Standalone Server" }
3 { $ComputerRole = "Member Server" }
4 { $ComputerRole = "Domain Controller" }
5 { $ComputerRole = "Domain Controller" }
default { $ComputerRole = "Information not available" }
$OperatingSystems = Get-WmiObject -computername $Target Win32_OperatingSystem
$TimeZone = Get-WmiObject -computername $Target Win32_Timezone
$Keyboards = Get-WmiObject -computername $Target Win32_Keyboard
$SchedTasks = Get-WmiObject -computername $Target Win32_ScheduledJob
$BootINI = $OperatingSystems.SystemDrive + "boot.ini"
$RecoveryOptions = Get-WmiObject -computername $Target Win32_OSRecoveryConfiguration
$exServer = Get-ExchangeServer | where {$_.Name -eq "$Target"}
$exVersion = "Version " + $exServer.AdminDisplayVersion.Major + "." + $exServer.AdminDisplayVersion.Minor + " (Build " + $exServer.AdminDisplayVersion.Build + "." + $exServer.AdminDisplayVersion.Revision + ")"
switch ($ComputerRole){
"Member Workstation" { $CompType = "Computer Domain"; break }
"Domain Controller" { $CompType = "Computer Domain"; break }
"Member Server" { $CompType = "Computer Domain"; break }
default { $CompType = "Computer Workgroup"; break }
$LBTime=$OperatingSystems.ConvertToDateTime($OperatingSystems.Lastbootuptime)
$MyReport += Get-CustomHeader0 "$Target - Role(s): $($exServer.ServerRole)"
$MyReport += Get-CustomHeader "2" "Basic Server Information"
$MyReport += Get-HTMLDetail "Computer Name" ($ComputerSystem.Name)
$MyReport += Get-HTMLDetail "Computer Role" ($ComputerRole)
$MyReport += Get-HTMLDetail "Exchange Role(s)" ($exServer.ServerRole)
$MyReport += Get-HTMLDetail "Last System Boot" ($LBTime)
$MyReport += Get-CustomHeaderClose
Write-Host "..getting logical disk configuration"
$Disks = Get-WmiObject -ComputerName $Target Win32_LogicalDisk
$MyReport += Get-CustomHeader "2" "Logical Disk Configuration"
$LogicalDrives = @()
Foreach ($LDrive in ($Disks | Where {$_.DriveType -eq 3})){
$Details = "" | Select "Drive Letter", Label, "File System", "Disk Size (GB)", "Disk Free Space", "% Free Space"
$Details."Drive Letter" = $LDrive.DeviceID
$Details.Label = $LDrive.VolumeName
$Details."File System" = $LDrive.FileSystem
$Details."Disk Size (GB)" = [math]::round(($LDrive.size / 1GB))
$Details."Disk Free Space" = [math]::round(($LDrive.FreeSpace / 1GB))
$Details."% Free Space" = Get-Ink ([Math]::Round(($LDrive.FreeSpace /1GB) / ($LDrive.Size / 1GB) * 100))
$LogicalDrives += $Details
$MyReport += Get-HTMLTable ($LogicalDrives)
$MyReport += Get-CustomHeaderClose
if ($exServer.ServerRole -like "*ClientAccess*")
{$MyReport += Get-CustomHeader "2" "OWA Connectivity"
Write-Host "..performing OWA connectivity test"
$colOWAResults = Test-OwaConnectivity -ClientAccessServer $Target
$MyReport += Get-HTMLTable ($colOWAResults | select MailboxServer, $hotLink, Scenario, $colourResult, $latencyMS, Error)
$MyReport += Get-CustomHeaderClose
Write-Host "..getting queue details"
if ($exServer.ServerRole -like "*HubTransport*")
$MyReport += Get-CustomHeader "2" "Queue Information"
$colQs = Get-Queue -server $Target
$MyReport += Get-HTMLTable ($colQs | Select-Object NextHopDomain, $colourStatus, MessageCount, NextRetryTime)
$MyReport += Get-CustomHeaderClose
Write-Host "..getting mailbox database information"
$spaceLog=[System.Diagnostics.EventLog]::GetEventLogs($target) | where {($_.LogDisplayName -eq "Application")}
$db = @{Name="database";Expression={$_.ReplacementStrings[1]}}
$freeMB = @{Name="MB";Expression={[int]$_.ReplacementStrings[0]}}
$whiteSpace = $spaceLog.entries | where {($_.TimeWritten -ge $now.AddDays(-1))} | where {($_.EventID -eq "1221")} | select $db,$freeMB
$ws = @{Name="White Space";expression={}}
if ($exServer.ServerRole -like "*Mailbox*")
$MyReport += Get-CustomHeader "2" "Mailbox Stores"
$colMailboxStores = Get-MailboxDatabase -Server $Target -Status | Sort-Object Name
$storeTable = @()
Foreach ($objMailboxStore in $colMailboxStores)
[string]$totalUsers = (get-mailbox -database $objMailboxStore).count
[string]$empty = $totalUsers.Length -eq 0
if ($empty -eq 'True')
[string]$totalUsers = "0"
$storeDetails = "" | Select Name, Mounted, "Total Users", "White Space", LastFullBackup
$storeDetails.Name = $objMailboxStore.Name
$storeDetails.Mounted = Get-Ink ($objMailboxStore.Mounted)
$storeDetails."Total Users" = $totalUsers
$storeDetails."White Space" = (($whitespace | where {$_.database -match $objMailboxStore.Name} | select -last 1).mb)
$storeDetails.LastFullBackup = $objMailboxStore.LastFullBackup
$storeTable += $storeDetails
$MyReport += Get-HTMLTable ($storeTable)
$MyReport += Get-CustomHeaderClose
$MyReport += Get-CustomHeader "2" "MAPI Connectivity"
Write-Host "..performing MAPI connectivity test"
$colMAPIResults = Test-MAPIConnectivity -Server $Target
$MyReport += Get-HTMLTable ($colMAPIResults | select Database, $newResult, $latencyMS, Error)
$MyReport += Get-CustomHeaderClose
$MyReport += Get-CustomHeader "2" "Mailflow Test"
Write-Host "..performing Mailflow test"
$colMailflowResults = Test-Mailflow -Server $Target
$MyReport += Get-HTMLTable ($colMailflowResults | select TestMailflowResult, $MessageLatencyTime)
$MyReport += Get-CustomHeaderClose
Write-Host "..getting Exchange services"
$ListOfServices = (gwmi -computer $Target -query "select * from win32_service where Name like 'MSExchange%' or Name like 'IIS%' or Name like 'SMTP%' or Name like 'POP%' or Name like 'W3SVC%'")
$MyReport += Get-CustomHeader "2" "Exchange Services"
$Services = @()
Foreach ($Service in $ListOfServices){
$Details = "" | Select Name,Account,"Start Mode",State,"Expected State"
$Details.Name = $Service.Caption
$Details.Account = $Service.Startname
$Details."Start Mode" = $Service.StartMode
If ($Service.StartMode -eq "Auto")
if ($Service.State -eq "Stopped")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("Unexpected")
If ($Service.StartMode -eq "Auto")
if ($Service.State -eq "Running")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("OK")
If ($Service.StartMode -eq "Disabled")
If ($Service.State -eq "Running")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("Unexpected")
If ($Service.StartMode -eq "Disabled")
if ($Service.State -eq "Stopped")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("OK")
If ($Service.StartMode -eq "Manual")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("OK")
If ($Service.State -eq "Paused")
$Details.State = $Service.State
$Details."Expected State" = Get-Ink ("OK")
$Services += $Details
$MyReport += Get-HTMLTable ($Services)
$MyReport += Get-CustomHeaderClose
$eventLogs=[System.Diagnostics.EventLog]::GetEventLogs($Target) | where {($_.LogDisplayName -eq "Application") -OR ($_.LogDisplayName -eq "System")}
$warningEvents = @()
$errorEvents = @()
$LogSettings = @()
$MyReport += Get-CustomHTMLClose
$fullReport += $MyReport
$MyReport = $null
$Date = Get-Date
$Filename = ".\" + "Exchange_Health" + "_" + $date.Hour + $date.Minute + "_" + $Date.Day + "-" + $Date.Month + "-" + $Date.Year + ".htm"
$fullReport | out-file -encoding ASCII -filepath $Filename
Write "Audit saved as $Filename"
Invoke-Item $Filenameplease refer to my scripts below, it should get you started.
http://www.myexchangeworld.com/2010/03/powershell-disk-space-html-email-report/
http://www.myexchangeworld.com/2010/07/powershell-script-to-monitor-exchange-server-2010-services-email-report/
you can customsise this to your needs and add relevant information.
cheers
thiyagu
Thiyagu | MCTS/MCITP - Exchange 2007 | MCSE 2003[Messaging] | http://www.myExchangeWorld.com. This posting is provided "AS IS" with no warranties, and confers no rights. -
1:N Replication Health Check
Hello,
When we run the check of 1:N Replication Health Check We are getting the following:
We cant replicate the tables mentioned in this report.
How should we proceed to fix this issue?
Thanks,
AmirHi Roy,
look at this note. it describes how to setup 1:n once you already created the config without "multiple usage" flagged.
Best,
Tobias
SAP Note 1898479:
SLT replication: Redefinition of existing DB triggers -
In TOAD, Need to Enable DB Health check option
Hi,
I am using TOAD 10.1.1.8 DBA Suite.
As my TOAD DBA Suite, DB Health check option should be there under
Database -> Diagnose -> DB Health Check.
But its not showing this option.
Kindly guide me as How to enable DB Health check.
Expecting your valuable reply.
Thanks in advance,
Orahar.
Edited by: Orahar on Feb 10, 2010 3:06 PMSure.
As I didn't get any valuable response from TOAD Forum, I have posted here.
I hope, I will get the solution here at OTN.
Thanks. -
How to health check time capsule disk
how to health check time capsule disk?
when doing time machine backuping and copying files into time capsule, it would take ages and very long time.. is the disk going to die soon?
is there anyway i can check the disk?
my time capsule is 2TB current model.
please help.
thank you.Time Machine automatically checks the backups on the disk. It does a quick check (a few seconds) before every backup, and periodically (every month, I think) does a much more thorough check.
You can do that yourself, by holding the Alt/Option key while selecting the TM icon in your menubar, and selecting Verify Backups. That may take quite a while, if you have a lot of data. I'd recommend connecting via Ethernet, as it will still be slow, but 2-3 times faster than WIFI. -
Turning Off The Alert - Notebook PC Battery Replacement Program Alert in Health Check.
I want to turn off the Notebook PC Battery Replacement Program Alert in Health Check. It continues to alert me for months now. This is driving me batty since I have checked it 3 times and it is not included in the recall! I have a HP Pavillion dv6000 running Windows Vista Home Premium Edition. Any help to turn this darn alert off permanently would be very helpful. Thanks.
Thank you to all who have read this post so far. Please continue to contact HP directly using the above information.
Matthew|Community Advocate | Best Buy® Corporate
Visit our Channel on
Private Message -
Vmware vsphere health check report v5.1.0
Hi,
I'm currently using the vmware vsphere health check report v5.1.0 script. I switched from another perl script to this and the report provide much more information. There is one thing that don't seem to work properly though..
I currently have a failed disk in my server and the report is showing "unknown" status next to 3 disk / disk day. If I run the other script I have used in the past, I have 3 alerts in red clearly showing that something has failed. Would any of you know why it's showing as unknown instead of critical in the report?
Old Script
o Disk or Disk Bay 15 Drive 15 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: Drive Fault - Assert: 0
o Disk or Disk Bay 2 Drive 2 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: In Critical Array - Assert: 0
o Disk or Disk Bay 1 Drive 1 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: In Critical Array - Assert: 0
o Disk or Disk Bay 0 Drive 0 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: Rebuild In Progress - Deassert: 0
New Report
BIOS 1 ABR Status 0: Unspecified - Deassert
0
OK
BIOS 1 Firmware Error 0: Unspecified - Deassert
0
OK
BIOS 1 Firmware Error 0: Unspecified - Deassert
0
OK
Cooling Unit 1 Cooling Zone 1 0 - Fully redundant
0
OK
Cooling Unit 2 Cooling Zone 2 0 - Fully redundant
0
OK
Cooling Unit 3 Cooling Zone 3 0 - Fully redundant
0
OK
Disk or Disk Bay 0 Drive 0 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 0 Drive 0 0: In Critical Array - Assert
0
UNKNOWN
Disk or Disk Bay 0 Drive 0 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 0 Drive 0 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 0 Drive 0 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: In Critical Array - Assert
0
UNKNOWN
Disk or Disk Bay 1 Drive 1 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: Drive Fault - Assert
0
UNKNOWN
Disk or Disk Bay 2 Drive 2 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: Rebuild In Progress - Deassert
0
OKThank you for the follow up. I do understand that a completly unreadable disk might throw an unknown status but the status is different from one report than the other. On one side, it clearly shows in red that the disk has something and on the side, it just throws a "I don't know what's going on with the disk". I ran both report the same day and i'm expecting some red in the report to warn me if a disk fail.
Is there a way to change that behavior from the health check script? -
How to automate DB health check report using OEM 11g
Hi,
I have been asked to share the DB health check report using OEM 11g. Could you please let me know how to achieve this and the report should go to his email.
Thanks in advance,
Balacheck,
manually you can schedule it through dbms_hm
http://www.oracle.com/technetwork/articles/sql/11g-resiliency-091703.html -
Oracle 9i (SE) Solaris 9 (DB Health check)
Hi Guys,
I want to compile a list that I can use for my Database health check. What are the things that I should add in this list which are very important. (pro active dba)
Thank you.Not specific to your configuration but refer Metalink note 122669.1 in this regard.
-
please suggest me how to generate SCOM health check report and automation for the same. I am using scom 2007 R2.
And need all windows servers health check report from scom as well...?Hi
As a good starting point you could use these reports
http://www.systemcentercentral.com/scc-health-check-reports-management-pack-v2/ and some Details here
https://blogs.technet.com/b/kevinholman/archive/2010/07/21/system-center-central-some-really-cool-opsmgr-health-reports-available.aspx. Which give you a pretty good picture of your environment.
For a MG check up on the SQL side see here
http://blogs.technet.com/b/kevinholman/archive/2010/06/16/management-group-checkup-a-database-perspective.aspx
Cheers,
Stefan
Blog: http://blog.scomfaq.ch -
Early Health Check - missing data
Hi folks,
My Early Health Check reports are generated with a couple of data missed. For example, SQL expensives don't appear and also the CPU Graphics.
Do you guys know what it could be?
tks a lot
ReHello,
Here is a question, this same data should be in the Earlywatch Alert reports (EWA).
Is it in the EWA reports or is it missing there too?
The services are different, but report much of the same information, and the Early Watch Alert should have the same
data you mentioned is missing int he Early Watch Health Check.
So is it there or not?
Regards,
Paul -
Hi all,
Some enquires regarding database health check. I did some research regarding health check, got overwhelmed by the information available out there.
Currently I don't have any report on hand, but currently working and starting on one. This report serves as a report for reference, to understand if there's any database performance issue, and as a report for management.
Wish to check with you folks, what are the typical things that I can look at on a daily basis to understand my database health status, eg. Buffer Hitrate, database I/O etc, especially those that may/will contribute to impact on the database performance. Or is there any good reference link whereby I can do some readup regarding such a health check?
Thanks in advance for any input.
EugeneHi Eugene,
Well that's a pretty open question and I guess you will get a lot of replies which I look forward to monitoring as there should be some very interesting ones there.
Anyway, let me just open with one point that I have found very useful in the past. As regards Database Performance , you can look as much as you like at the statistics and a great deal of discretion is required in interpreting them but the real test for me of how well a database is performing is in terms of the user (or application) perception. Are the responses from the database good enough to meet the users expectations. Check the average response time for example and set guidellines for what is acceptable, very good response , very bad response etc.
I use this as a guideline so then once the database is perfoming in the sense that the user is satisfied (or better still happy with the performance) we can gather the statistics (from Oracle 10g onwards there are lots of tools built in like ADDM and AWR for gathering and storing the database statistics) and create baselines. Once we have baselines for a normally performing system, as soon as problems are reported we can run off a diagnostic tool like ADDM for that period , compare it against the baseline and look for the striking differences. From there we can start an analysis of individual numbers, buffer hit ratios etc. to delve further.
Hope this helps , I am sure lots of other people will chip in to this
Regards -
Automatic connection "ping" / health check in TopLink JPA ?
Some days ago we experienced problems with our underlying Oracle database, so the DB server hat to be shut down and rebootet. The application server machine (running Apache Tomcat 5.5 on a Linux OS) which provides several web-applications that are using Toplink JPA were not restarted after the DB was up again.
We encountered several subsequent "connection reset" errors within the webapps which where produced by TopLink JPA. I'd assume that this comes from the underlying restart of the DB, which invalidated/closed TopLink's JPA connection.
is there any option e.g. to be set in persistence.xml to enable a Connection-"ping" or "health check" before TopLink JPA is using the connection?
e.g.
toplink.jpa.connection.ping = "select 1 from dual";
regards,
HansHans,
There is nothing built in but you can use an ExceptionHandler to handle failures and re-connect connection. This is typically only an issue when using TopLink's internal connection pooling. It is more common in a container to use its data sources and rely on them to handle connection management.
Doug -
SMS_STATE_MIGRATION_POINT Health check failed for port 80 with status code 500
My SMS_STATE_MIGRATION_POINT gets a red cross because the health check of the SMS_STATE_MIGRATION_POINT is “sometimes” failing. I don’t understand why its fails sometimes? Any suggestions.
gr, Iwan
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Checking store for cleanup of failed or stale state stores... SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
STATMSG: ID=6207 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_MIGRATION_POINT" SYS=SWAMS0083 SITE=P01 PID=13560 TID=22044 GMTDATE=Thu Apr 15 13:01:29.777 2010 ISTR0="500" ISTR1="Internal Server Error" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)I'va got the following event in my security event log this is strange because the Windows Firewall is off and the problem is not always there, 8 out 10 time the health checks passes.
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 4/15/2010 7:01:27 PM
Event ID: 5159
Task Category: Filtering Platform Connection
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ********
Description:
The Windows Filtering Platform has blocked a bind to a local port.
Application Information:
Process ID: 13560
Application Name: \device\harddiskvolume2\programs (x86)\microsoft configuration manager\bin\i386\smsexec.exe
Network Information:
Source Address: 0.0.0.0
Source Port: 9000
Protocol: 17
Filter Information:
Filter Run-Time ID: 0
Layer Name: Resource Assignment
Layer Run-Time ID: 36
Maybe you are looking for
-
Sales Office and Sales Group desciptions missing
Hi all, In the initial download I copied my sales structure from R3 environment. Also I downloaded the related customizing objects. The structure is now correctly copied and the sales groups and offices too. The problem is that when I try to assign a
-
How to resize a text sprite?
This code follow can change a shape or picture sprite's dimension: vRect = mySprite.rect vRect.left = vRect.left - 5 vRect.right = vRect.right + 5 mySprite.rect = vRect But when this code is used to a text(or field) sprite, it doesn't work! Why? How
-
Has anyone used the Extract Odd/Even Pages action for PDFs? I'm trying to use it to extract pages from a PDF and save as separate files. When I use it the action spins for a moment, says it succeeded, but I don't get any new files.
-
Pages for Ipad - comands for colour of letters
Please, let me know which is the command and how can I manage to change the colour of the letters and the text in general of a document in Pages in my i-pad! Thanks Daniela
-
Autofocus not working. (18-55mm lens)
Hello, The autofocus on my Canon 18-55mm is malfunctioning and I'm afraid it may be broken. All the internet research I've done points to issues electronic, but I believe this to be mechanical simply because of the noise it makes. With the lens set t