Help in ordering BE6000 and licences

Hi
I need some help in ordering BE6000 solution for my organization.
We are a small company growing rapidly. Currently have UC560 with about 50 users. The main reason for upgrading our voice system is that we'll be having over 200 employees by the end of the year. And the biggest problem currently is as follows.
The technical requirement we have is:
When a call comes in, a greeting should be played out (like "Thank you for calling.... your call maybe recorded....") and then transferred to a call blast group. (the main point being, all the people calling in are of very old age, hence they shouldn't be required to press any key but rather just wait for the audio greeting to finish and then get transferred to a call blast group.)
This I've been told can be implemented by using CUCM and CUC, hence BE6000 suitable option.
Now coming to the real issue about licencing:
I'm not sure if using 'UCL Enhanced ' licence would do the job or 'UWL Standard '. About 25 users would be using voicemail, and also the main customer care blast group would be using voicemail.
Also as we're migrating from UC560, I read that there is a migration licence, but not sure how and what.
My current order was
BE6K-ST-BDL-K9=
BE6K-START-UCL25
BE6K-UCL-ENH
Or should it be BE6K-START-UWL25, BE6K-UWL-BE ?
I would really appreciate any advise on this.
Thanks a lot
regards,
Aws

Hi CipherunaSupport, i see that you are looking at migrating from the UC560 to the Business Edition 6000. I think it's better if we discuss this over the phone so we can check the part number's that you are looking into, Feel free to message me directly for further assistance. Hope to hear from you! :)

Similar Messages

Help with order by and group by together

Hi: I have a table with severity and devicename as two fields. I want a query which returns a list to include the records in the following order: Devicename with the highest severity at the top but all records should be grouped by devicename irrespective of the severity. Essentially I want the devicename record with the highest severity value at the top. Below is an example
Ticket1, DEVA, Severity:2
Ticket2, DEVA, Severity:4
Ticket3, DEVB, Severity:1
Ticket4, DEVB, Severity:8,
Ticket5, DEVC, Severity 3
Query's result should be as follows
Ticket3, DEVB
Ticket4, DEVB
Ticket1, DEVA
Ticket2, DEVA
Ticket5, DEVC
I have tried the following and it doesn't work.
Select a.devicename, b.severity
from (
select DEVICENAME,MIN(SEVERITY) from USERINCISUMMSTATUS group by DEVICENAME ORDER by MIN(SEVERITY) DESC) a,
USERINCISUMMSTATUS b
where a.devicename = b.devicename;TIA
Ray

Not a grouping but an ordering;
SQL> with t as (
   select 1 ticket, 'DEVA' devicename, 2 severity from dual union all
   select 2, 'DEVA', 4 from dual union all
   select 3, 'DEVB', 1 from dual union all
   select 4, 'DEVB', 8 from dual union all
   select 5, 'DEVC', 3 from dual)
select ticket,
   devicename,
   severity
from t
order by max(severity) over (partition by devicename) desc,
   devicename,
   severity
    TICKET DEVI   SEVERITY
         3 DEVB          1
         4 DEVB          8
         1 DEVA          2
         2 DEVA          4
         5 DEVC          3

BAPI/FM Help Needed for PM Work Order Update and Notification create

Hi,
I am using BAPI - BAPI_ALM_ORDER_MAINTAIN to update the work order details and create notifications for the object list but i am getting errors in doing that.
IWO_BAPI 203 -Changing the execution factor in the BAPI is not supported
And i have to create notifications to each object in the object list. This BAPI is not supporting that.
So i used another BAPI BAPI_ALM_NOTIF_CREATE to create notification and passed the order number , counter etc to it but in the order it is creating a new row for that equipment and linking the notification to it.
Need some help on these.

Dear
1. If you want a Notification mandatory to be created for Order using IW31 you can once make this happen by User Status in Order , i would suggest if you are doing implementation better Use Order Types which has got Notification integrated in it .
Check Order type PM05 in Ideas server you have PM05 Order with notification fields integrated , which created notification in Background when order is Created or released.
2.For Work Order B --> Notification A , Not Allowing I donot have any idea check whether is there any User exit from experts or ask ur Abaper
Regards,
Edited by: Srinivas Narayana Gowda on Jun 11, 2009 1:10 PM

Pre-order purchased but not downloaded; no pre-order email and purchases not on cloud. Help?

I purchased a pre-order for an album back in September, with a release date of Oct. 29. On Oct. 29, the album was displayed as "purchased" on the iTunes Store yet it did not download. I did not receive a pre-order email and the purchase was not on the cloud.

I have the same problem :(
Really wish someone would help

BE6000 and SIP trunk

Hello!
Now we use Cisco IP telephony based on Cisco CME. Cisco CME is installed on 2821 router with IOS C2800NM-ADVENTERPRISEK9-M, Version 12.4(24)T7. A SIP trunk is configured between CME router and telephony provider.
We plan to upgrade our telephone system and begin using Cisco CBE6000. I study the documentation and in "Cisco Business Edition Unified Communications and Collaboration Solutions for Small and Midsized Companies", I find that for SIP trunk to works in CBE6000 a Cisco Integrated Services Router with Cisco Unified Border Element is required. Or other quote from this document "Public switched telephone network (PSTN) connections using SIP is available through any Cisco Integrated Services Router voice gateway".
In this regard there is a question: what is the functions of this router when I make a trunk between CBE6000 and telephony provider SIP gateway and whether it is possible to use existing Cisco 2821 router as such router.
Thanks.

Hi Ayodeji,
I too have a somewhat similar query.
We have UC560 running currently at our company, the UC560 is connected to an ISDN modem from the network provider. We are now upgrading to BE6000. To connect to the ISDN E1/T1 line, we've ordered Cisco 2921 with a E1/T1 VWIC card (VWIC3-2MFT-T1/E1) which will connect to BE6000 and internal LAN. I just wanted to know what would I need to configure on 2921?
Do I need to install CUBE or just configure it to connect to ISDN line?
Many thanks for any help.
regards,

Diffrence in incomming order qty and billing qty in cube 0sd_c03 & 0sd_c01

Dear All.
i have uploaded 2 cubes 0SD_C01 & 0SD_C01 from our R/3 data, SAP recommed for 0SD_C03 for sales analysis and their best practice is also based on 0SD_C03 but it is very strange the values of both the cubes are not the same when i run the report but the values of 0SD_C01 is 100% same as R/3 values i.e. mcsi reports show the same incomming and billing qty as i can see in report for 0SD_C01 but strang to see in 0SD_C03 there is diffrence in these values.
can any one explain why did this happen as SAP recommed to use lbwe data sources and their best practice also base on 0SD_C03 and the other one i.e. 0SD_C01 is based on old LIS structures.
during exploration i come to know that in some material orders incomming and billing quantaties are same but diffrence in most of them.
any help will be highly appreciated.
thanks & best regards,
Zeeshan

Hi,
There are somany Routines for Keyfigures in both Cubes, I hope you may using 0QUANT_B key figure for Qty, the reason is there may be some difernece in Routines in both cubes, so you need to check it tehn you check in teh reports, whether is there any restrictions, you need to iopen the each node and check i nthe both reports.
I also faced teh same problem with MCSI and BW reports, MCSI, we can customizi it an dut is just InfoStructure and having routines internally. So you need to take one material, plant and date where the diffrenece is coming then track it.
Check OSS NOTES:
Note 166996 - BW InfoCube 0SD_C03: incorrect incoming order qty
Note 1156259 - Update rules incorrect for InfoCube 0SD_C03
Thanks
Reddy
Edited by: Surendra Reddy on Aug 10, 2009 7:19 AM

Purchase order Revision and Releases

Hello All
Can any one tell me the keyfig for Purchase order Revisions and Releases.I am trying to built a report that has PO Revision count and PO Releases count.
Any help would be appreciated
Thanks

Hi,
PO release is a approval procedure. If a PO fulfills certain conditions (e.g. the total order value exceeds $10,000), it has to be approved (by the cost center manager, for instance) before it can be processed further. This process of approving is knows as release procedure.
PO revision refers to changes made to PO. If an existing PO is changed, the system can print an amended PO displaying the changes. The first change is printed as 'amendment no. 1", the second as 'amendment no. 2" and so on.
Hope this helps.

Order qty and total confirmed qty in PI sheets

Dear Experts,
Kindly suggest the possibility of appearing total order qty and already confirmed qty in the PI sheet, system useually provides the same while performing confirmation through co11n or cor6.
Thanks in advance for your help..
Regards,
Nitish

Hi Srini,
The following details are available in the table AFVV,
Standard value, operation qty & Base qty.
With this values create a formula Standard value * operation qty/ Base qty , this will equal to the planned hours for that particular activity type. Similarlt planned hours for other activities can be calculated.
The actual/confirmed hours are available in the table AFRU.
Regards,
Senthilkumar

Regarding production order closing and demand closing

Hi Gurus,
I am new to pp module..
I have the requirement on production order closing and demand order closing.
The requirement needs plant,reuirement plan no ,basic finish date and percentage in selection screen.
In the output display plant,requirement plan no,PIR No,order,order finish dat ,***.order qty,***.delivered qty,qty difference,percentage%,order status as in alv grid display.
And in the output it has 2 buttons named technically complete and demend close .whener user click on first button system should take all the orders which r selected to the program with the same reuirement plan as for the selected order and then technically close all the orders with the same reuirement plan number.
when user clicks on demand close button,system should take the respetcive requirement plan number,order finish date and material and it has to take the pir no which match the above and deactivate the pir and save.
I need the help about this.
Thankx in advance.

Dear Chandu,
First settle the production order using the T Code CO88,and then close the production order.
Prerequisites
Prerequisites for setting the CLSD status are:
The order must have the status Released (REL) or Technically completed (TECO)
The order balance must be 0
There can be no open purchase requisitions, purchase orders or commitments
There can be no future change records from confirmation processes
Regards
Mangalraj.S

How to identify difference between Configure To Order (CTO) and Engineer To Order (ETO) items

Hi All,
We are working on Oracle Database 10g
We have to develop a code which involves Configure To Order (CTO) and Engineer To Order (ETO) items.
Can anyone advise is there any table and the corresponding column in the database which will help identify if an item is a CTO or ETO.
Regards,
Shruti

Shruti,
Have you checked eTRM website? -- http://etrm.oracle.com
Please also see (How To Find the VIEW or TABLE That Populates a Form So That a 'Custom Report' Can Be Created Using Same VIEW or TABLE (Doc ID 604772.1)).
Thanks,
Hussein

Exchange Rate calculation mismatch in Sales Order Invoice and Cancelled Invoice

Hi,
In Sales Invoice, Exchange Rate is maintained as 7.75132
Invoice Amount is 72000 USD. So the Amount calculated should be 558095.04.
But in Accounting Document the Amount is posted as 558095.15 for the GL Sales Account.
In Cancelled Sales Invoice, Amount posted is 558095.04 in GL Sales Account which is correct.
Please help me understand why there is difference in both the Amount even when the Exchange Rate is same.
Regards,
Debashri Dutta

Hi Ankur,
Thanks for your reply.But our problem is sales order,exchange rates are defined with M type in OB08 as u have said.However when the periods are different for order entry and invoice generation we are facing the following problem.Orders are at old exchange rates and excise invoice is getting generated at current exchange rate.This is resulting in value difference between commercial invoice and excise invoice.
Please help.
Regards,
Praveen

I want to return my iPad 3, but I did not have an apple account at the time of purchase, and when I type in my order number and proceed to click "cancel order", it prompts me to log in with my apple I'd and then tells me that the account is not authorised

I want to return my iPad 3, but I did not have an apple account at the time of purchase, and when I type in my order number and proceed to click "cancel order", it prompts me to log in with my apple I'd and then tells me that I am not authorised to do anything on the account in relation to the transaction. What should I do?

You can view and edit your orders without an Apple ID by logging in with your order number, along with the shipping zip code or email address.
I copied the text posted above from this website.
http://store.apple.com/us/help/viewing_changing_orders
Click or tap on the Order Status link here and you should be able to type in the order number and your zip code.
To view or edit your Apple Online Store order, visit online Order Status and log in with your Apple ID and password.

Sales order no and line item no in account assignment tab of line item no.

Hi All,
When we display a sales order and go to line item --> Account assignment tab --> we can see sales order no and line item no in that screen. We want to know from where this existing no. in that field is populating from.
We want to know this as we want to check feasibility of changing sales order and item no to maintenance contract no and line item no. ( Maintenance contract we have to pick from notification)
If anybody has any idea about this do let me know as this is urgent requirment.
Effort will be rewarded.
Thanks in advance.
Edited by: Satish Bharambe on Jul 4, 2008 10:38 AM

Hi Satish,
You mean Accounting assignment tab-->In Settlement rule details
If yes the order number which is coming in that field Sales order and for which sale order you are looking that details both are the same numbers(i.e Nothing but sales order number).
When you create sales order system will give number of the sales order the number will come in this place.
I hope it will help you,
Regards,
Murali.

Create additional field in sales order item and copy to purchase order item

Dear SAP Gurus,
I am hoping that someone could help me by providing me with how to implement the following 2 requirements in the SD order and in the purchase order.
1. I am wanting to add a custom field to the SD sales order item copying a value from the vendor customer master.
2. I then want to add a custom field to the purchase order item and copy the value from my custom field in 1. to this new custom field..
Can you please advise how I would go about implementing the above requirements? I am assuming that there are exits to allow me to implement these 2 requirements.
Many thanks
Henry

Hi,
For the first requirement you can use the USEREXIT_MOVE_FIELD_TO_VBAP in report MV45AFZZ.
For the second, as I think that you will create a RFQ you can try to use the enhancement MEREQ001.
Regards,
Eduardo

Order type and Item category group

Can anyone tell me which is the relation between order type and Item category group from material master ??
In fact the problem is that I have created a material and when I want to create new sales order it gives me this errror:
"No item category available (Table T184 ZORDER ZITGR)"
Is there a tranzaction where I can assign Item category group ZITGR to sale order type ZORDER or something like that??
What should i do?

Hi Dan,
Goto T-Code VOV4 and maintain the table
Sales Doc type + Item Category Group + Usage + Higher level Item Category = Item Category
TA + NORM + Nil + Nil = TAN
If you have Customized your own Document Type and Item Category Group and Item Category then give your
Sales Doc type (ZORDER)+ Item Category Group (ZITGR)+ Usage + Higher level Item Category = Item Category (ZTAN)
Reward if helpful
Regards PAVAN

Help in ordering BE6000 and licences

Similar Messages

Maybe you are looking for