Diffrence in incomming order qty and billing qty in cube 0sd_c03 & 0sd_c01
Dear All.
i have uploaded 2 cubes 0SD_C01 & 0SD_C01 from our R/3 data, SAP recommed for 0SD_C03 for sales analysis and their best practice is also based on 0SD_C03 but it is very strange the values of both the cubes are not the same when i run the report but the values of 0SD_C01 is 100% same as R/3 values i.e. mcsi reports show the same incomming and billing qty as i can see in report for 0SD_C01 but strang to see in 0SD_C03 there is diffrence in these values.
can any one explain why did this happen as SAP recommed to use lbwe data sources and their best practice also base on 0SD_C03 and the other one i.e. 0SD_C01 is based on old LIS structures.
during exploration i come to know that in some material orders incomming and billing quantaties are same but diffrence in most of them.
any help will be highly appreciated.
thanks & best regards,
Zeeshan
Hi,
There are somany Routines for Keyfigures in both Cubes, I hope you may using 0QUANT_B key figure for Qty, the reason is there may be some difernece in Routines in both cubes, so you need to check it tehn you check in teh reports, whether is there any restrictions, you need to iopen the each node and check i nthe both reports.
I also faced teh same problem with MCSI and BW reports, MCSI, we can customizi it an dut is just InfoStructure and having routines internally. So you need to take one material, plant and date where the diffrenece is coming then track it.
Check OSS NOTES:
Note 166996 - BW InfoCube 0SD_C03: incorrect incoming order qty
Note 1156259 - Update rules incorrect for InfoCube 0SD_C03
Thanks
Reddy
Edited by: Surendra Reddy on Aug 10, 2009 7:19 AM
Similar Messages
-
Open Qty and Received Qty for Open Purchase Order.
How to Fetch the open qty and received Qty of every Open purchase orders in EKPO table where ELIKZ = SPACE OR LOEKZ = SPACE. What are the table and field used? Kindly help me.
Hello Senthilramkumar,
Use ME2L/ME2N/ME2M with selection parameter WE101.
Hope this will help. -
Order qty and confirmed qty mismatch
Dear friends,
My requirement is System should not allow to go further if the sale order qty and confirmed qty(after avaialbility check) mismatch is there.Pls suggest.
Now currently system will check the availability qty and will show the information of confirmed qty in the another screen.and if we say continue the process, we can go ahead and save the document.but the document will be in open state.
So pls suggest the way i can go ahead for this requirement.
Regards
Mahendar.hi,
If u want to allow user to create SO as much as available qty..? means system sud create SO for order qty is equal to availble qty ...? if yes
then go the availbality check and find out availability check and checking rule..
and again go to OVZ9 remove the check box check with out RLT from rep.lead time tab
Resul is: If u enter in SO a10 qty ,and if you have only 5 qty in hand or in plant ,then system after checking the items it will change the order qty in SO(i e 5) automatically,
Caprin -
I need to display a Report which contain -- del QTY and INV QTY in one
Hi ALL,
I need to display a Report which contain
<b>Customer , Material , Order No, Delivery No, Billing No , Order Qty , Dev Qty, Bill Qty , Invoiced Qty and There Values in One Line .</b>
How can I Display, When I am executing the report against the Delivery Number Bill Qty and Invoiced Qty is showing Hash ( # ).
Do I need to right any Routines for this, if I am correct, where I have to write that code and what is the code ,
What are the Consolidation routines ?????
I am working on BI 7.
Regards ,
Shaik
Message was edited by:
shaikFrst check in backend, which all cubes have got data for each of three..
Corresponding you can go ahead with Multi/Infoset..
Look for reference no in all three cubes and pick one order and track tht by reference no in all cubes,
Hope it helps..
Thanks for points assigned -
Sale order delivery and billing blocked
Hi sap sd gurus
I have a problem after creating a sale order , the one line item in sale order showing status of delivery blocked and billing blocked , now i am unable to post delivery and billing when i see in schedule line item order qty and confirmed qty .
Now i want to find why this is blocked and remedy for removing this block .
Could anyone suggest me in this issue asap
thanks in advance
KannaDear Kanna,
Go to XD02 at the toppage you will find Extras
In that Extra Topage you will find a field Blocking Data.
Check whether Order block and Delivery Block has been ticked.
If ticked is there remove the tick and try Delivery and Billing.
If you have any concerns revert back the same to me
With Regards,
Amjath -
Where to get Received/Required Qty and Available Qty of MD16
Hi Experts!
Need your help!
I need to know where or how to get the values at the Received/Required Qty and Available Qty column found at MD16 order report.
Thanks!hey use MD04 for this purpose enter material and plant
and press enter
and u will get all details
hope it will be useful
cheers
s.janagar -
Difference between pick qty and delivery qty
Hi,
My delivery qty is 5 pcs. However while making transfer order from within delivery, the Transfer order is being made automatcially for 17 pcs and so the pick qty is 17 pcs. Due to the differenc ein delivery qty and pick qty, I cannot do PGI in the delivery.
When I use LT0G, and give the delivery and warehouse no and movement type 999, the system does not allow the transaction and gives a message that, function not yet supported for Handling units. But I do not have handling units in my delivery. Neither the system allows me to cnacel the Transfer order thru LT15.
How to correct the above situation so that the TO does not pick up the qty greater than the delivery qty or what other alternatives are there. Also how to ensure that TO is made of qty which is equal to delivery qty.
Iam not aware of WM module, so kindlyu tell in detial pls.
regards
sachinIn IMG>LE>WM>Master Data> Define storage type.
Check In stock removal control whether "Full stock removal reqmt act" is active.
If this is active it will try to pull the total quant irrespective of your requirement.
Reward if useful.
Regards
EDWIN. -
Sales order, Delivery and Billing document creation
Hello Experts,
I am working on credit management and am in need of creating sales order, delivery and billing document.
Can some one send me the screen shots or any doc which outlines order,delivery and billing document creation.
Will award points definitely.
Also what are the t.codes for these creation?
Regards,
SriramOrder Create:
Transaction VA01
Give the order type , If standard order use OR or ZOR, which ever is maintained
Then give the sold to and press enter
In the Items screen Give the material and quantity and press enter. This should be enough to create an order, if u need u can give order reasons...etc. Then save the Order. Note down the order number.
Go to VL01N-
and give the above order for which u are doing delivery, In the pick quantity enter the amount in the order and press enter. and make sure the delievry date should be the same in the Sales Order Schedule line- REquested delivery date. Save the document.Note down the document number
Go to VL02N - Open the above delivery document and click on PGI - done
Now go to VF01 and this should bring up the delivery document number., If it doesnt , give the delivery document number and hit enter. then save the document. Billing is done.
Regards
Sai -
Delivery status B and TO status C , Deliver qty and Pick qty are equal
Hi
OBD status is wrong and its coming as Partialy picked for a item however the delivered qty and pick qty are equal. also TO is created and confirmed for delivered qty.
I have checked TO is not pending for confrimation please advise.Hi Rahul,
Please check the OSS note
1475784 - Delivery header status is not consistent with item status
Try to run report RVDELSTA in simulation to check whether system propose any change. if at all you are not getting any positive result from above steps raise an OSS note with SAP -
hi Experts,
What is the field for Order Qty in VBAP and Deliver Qty in LIPS.
Thanks.Hi
Find the Field names.
Order Qty - VBAP-KWMENG
Deliver Qty- LIPS-LFIMG
But here you can link these Tables only thru VBFA table.
Regards,
Sreeram -
Increased Qty in sales order than the Billed qty.. urgent
Hi folks,
When I am creating a return sales doc. with reference to a Billing doc,
everything is getting copied on to the return sales doc.
The Qty of the item is also getting copied on to the sales doc.
But when i increase the qty of the item , it is giving me a warning message saying " Qty is more than the billed qty." and thus allowing me to take it.
The client want that this should be an error message and hence shouldnot allowed to take the increased qty.
Can anyone tell how to make it an error message.
thanx
souravHi Sourav,
Check copy control settings in the transaction VTAF.
In that you go to item level copy control check the field Pos./neg.quantity whether this field set as '-' or not.
If not set enter - (Minus) then try
If already enter you need to go for the User exits to cahnge the warning message to error message.
I hope it will help you
Regards,
Murali. -
Delivery Qty and OPEN Qty Field in SALES Order Delivery Reports.
Dear All Experts.
Please Help me for which field put for Delivery QTY. and it is necessary to calculate OPEN QTY. or we can put directly from field.
i used this field for Order Qty : WMENG.
Please Guide me.
Thnks With Regards :
Bhavesh Panchal.Delivery qty - LIPS-LFIMG.
You cannot get open quantity directly.
use this way.
Delivery qty - LIPS-LFIMG.
order qty - VBAP-KWMENG.
open qty = delivery qty - order qty. -
Open Qty and Delivered Qty remains same even after Return
Hello
After making return, the open qty remains the same and its not reflecting the return qty.
for e.g.
I have made a Sale Order of 100 qty
I delivered 20
In sales order my Delivered Qty is 20 and Open qty is 80
Now I made a Return of above 20 Qty
But after that the Order is still showing Delivered 20 and Open Qty 80
The Open qty should be 0 at this stage.
Regards
IndrajitHi Indrajit ,
Your doubt is genuine .
The Open quantity of SALES ORDER , at item level (row) does not increase by returning the goods.
Once you have delivered the goods it will reduced from the Open quantity .
.You have to create a new Sales Order for further Open quantity
Thanks
Ashish -
PO Qty and GR Qty is not coming for 2LIS_06_INV
Hi Expert,
I am trying to load data on 2lis_06_inv datasource but after filling the datasource, PO Qty(BSMNG) and GR Qty(WEMNG, BPWEM) fields does not contain any data but the invoice fields are contain data.
Thanks and Regards
Lalit KumarHi Expert,
I have already checked the data on R/3 side after filling the setup table and these fields are not
hidden that i've already checked but still those fields are not containing any data.
Thanks and Regards
Lalit Kumar -
Problem in FM:WS_DELIVERY_UPDATE to change picked qty and delivery qty
Dear friends.
i am trying to chande picked and del qty's through above fm.
i am getting an error message like this:
(Required field in interface to delivery update missing 0080000155 000010
VBELN 000000 Message no. VL280 )
i am pasing all requires parameters.
please help me if any thing is missed..........
here i am giving my code:
DATA:i_vbeln TYPE vbeln,
i_posnr TYPE posnr,
i_new_delqty TYPE lips-lfimg,
wa_lips LIKE lips OCCURS 0 WITH HEADER LINE,
wa_likp TYPE likp.
i_vbeln = '0080000155'.
i_posnr = '000010'.
i_new_delqty = '30'.
SELECT SINGLE * INTO wa_likp
FROM likp
WHERE vbeln = i_vbeln.
SELECT SINGLE * INTO wa_lips
FROM lips
WHERE vbeln = i_vbeln
AND posnr = i_posnr.
DATA:gs_vbkok LIKE vbkok,
gt_vbpok LIKE vbpok OCCURS 0 WITH HEADER LINE,
gt_prott LIKE prott OCCURS 0 WITH HEADER LINE,
gs_prott LIKE prott.
DATA:xfeld1 TYPE xfeld,
xfeld2 TYPE xfeld,
xfeld3 TYPE xfeld,
xfeld4 TYPE xfeld,
xfeld5 TYPE xfeld,
xfeld6 TYPE xfeld,
xfeld7 TYPE xfeld,
xfeld8 TYPE xfeld.
gs_vbkok-vbeln_vl = i_vbeln.
gs_vbkok-vbeln = i_vbeln.
gs_vbkok-brgew = wa_lips-brgew.
gs_vbkok-kzbrg = 'X'.
gs_vbkok-kzntg = 'X'.
gs_vbkok-vbtyp_vl = wa_likp-vbtyp.
gs_vbkok-ntgew = wa_likp-ntgew.
gs_vbkok-gewei = wa_likp-gewei.
gs_vbkok-lgnum = wa_likp-lgnum.
gs_vbkok-kodat = wa_likp-kodat.
gs_vbkok-KOMUE = 'X'.
*gs_vbkok- = WA_LIKP-
*gs_vbkok- = WA_LIKP-
*gs_vbkok- = WA_LIKP-
gt_vbpok-vbeln_vl = i_vbeln.
gt_vbpok-posnr_vl = i_posnr.
gt_vbpok-matnr = wa_lips-matnr.
gt_vbpok-charg = wa_lips-charg.
gt_vbpok-lianp = 'X'.
gt_vbpok-kzntg = 'X'.
gt_vbpok-kzbrg = 'X'.
gt_vbpok-lfimg = i_new_delqty.
gt_vbpok-lgmng = i_new_delqty.
gt_vbpok-umvkz = wa_lips-umvkz.
gt_vbpok-umvkn = wa_lips-umvkn.
gt_vbpok-TAQUI = 'X'.
gt_vbpok-brgew = wa_lips-brgew.
gt_vbpok-ntgew = wa_lips-ntgew.
gt_vbpok-gewei = wa_lips-gewei.
gt_vbpok-vrkme = wa_lips-vrkme.
gt_vbpok-meins = wa_lips-meins.
gt_vbpok-VOLUM = wa_lips-VOLUM.
gt_vbpok-VOLEH = wa_lips-VOLEH.
gt_vbpok-vbeln = wa_lips-KDAUF.
gt_vbpok-posnn = wa_lips-KDPOS.
*gt_vbpok-vbeln = wa_lips-vbelv.
*gt_vbpok-posnn = wa_lips-posnv.
gt_vbpok-umrev = wa_lips-umrev.
gt_vbpok-vbtyp_n = wa_lips-vbtyv.
gt_vbpok-werks = wa_lips-werks.
gt_vbpok-pstyv = wa_lips-pstyv.
gt_vbpok-ormng = '15'.
gt_vbpok-ndifm = '15'.
gt_vbpok-orpos = i_posnr.
gt_vbpok-pikmg = '1'.
gt_vbpok-SPE_DLV_QTY_FROM = i_new_delqty.
APPEND gt_vbpok ."TO gt_vbkok.
gt_prott-vbeln = i_vbeln.
gt_prott-posnr = i_posnr.
gt_prott-matnr = wa_lips-matnr.
gt_prott-vrkme = wa_lips-vrkme.
gt_prott-lfimg = i_new_delqty.
gt_prott-vrkme = wa_lips-vrkme.
APPEND gt_prott." TO gt_prott.
BREAK-POINT.
CALL FUNCTION 'WS_DELIVERY_UPDATE'
EXPORTING
vbkok_wa = gs_vbkok
synchron = 'X'
no_messages_update = ' '
commit = 'X'
delivery = i_vbeln
update_picking = 'X'
nicht_sperren = ' '
if_confirm_central = 'X'
if_wmpp = 'X'
if_get_delivery_buffered = 'X'
if_no_generic_system_service = 'X'
if_database_update = '3'
if_no_init = ' '
if_no_read = ' '
if_error_messages_send_0 = 'X'
if_no_buffer_refresh = 'X'
it_partner_update = ' '
it_sernr_update = ' '
if_no_remote_chg = ' '
if_no_mes_upd_pack = ' '
if_late_delivery_upd = ' '
IMPORTING
ef_error_any_0 = xfeld1
ef_error_in_item_deletion_0 = xfeld2
ef_error_in_pod_update_0 = xfeld3
ef_error_in_interface_0 = xfeld4
ef_error_in_goods_issue_0 = xfeld5
ef_error_in_final_check_0 = xfeld6
ef_error_partner_update = xfeld7
ef_error_sernr_update = xfeld8
TABLES
vbpok_tab = gt_vbpok
prot = gt_prott
VERKO_TAB =
VERPO_TAB =
VBSUPCON_TAB =
IT_VERPO_SERNR =
IT_PACKING =
IT_PACKING_SERNR =
IT_REPACK =
IT_HANDLING_UNITS =
IT_OBJECTS =
ET_CREATED_HUS =
TVPOD_TAB =
IT_TMSTMP =
IT_BAPIADDR1 =
SERNR_TAB =
IT_HURES =Hi,
Thanks for the repl
i also passed..
vbeln_vl,
posnr_vl,
vbeln,
posnn
Still not working...any other info to pass to FM
Regards,
Raj
Maybe you are looking for
-
I am tired of the glare. What can I do???
-
Cannot publish iMovie project paramerr: error in user parameter list
When trying to publish imovie project, getting message: Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list) Can anyone help explain what to do?
-
Doubt on Record set in File Content Conversion
Hi Please give me the procedure for Deleting record set in file conet conversion means hoe can i delete Recordset(tag) using File conent conversion. Thanks
-
My macbook pro refuses to conect to my wifi.
I have internet at my house, it's wifi, every other computer in my house has absolutely no problem connecting. This is my first mac item ever and I'm not too good with it, but for some reason it refuses to connect to my wifi. I have unplugged my rou
-
How do I convert the MAP app from meters to miles?
In MAPS, how do I convert from meters to miles?