HELP NEEDED Data not working IPhone 6 3GB

Hi there, For the past few months have had extremely frustrating issues surrounding my data usage on my O2 phone. It's a long story and I'll try and keep it brief. Around Feb/March on old contract/phone ( Iphone 5s 1GB) - found that when I ran out of data and called 2202 to add more data, I would be charged but the data was never used. As soon as I hung up the phone it still wouldn't connect (which it didnt use to do before) Got a new phone and contract on upgrade - IPhone 6, 3GB - As soon as I took it home and switched it on I got a text saying my data had run out. O2 said this was because my new contract had not kicked in. Left it 24 hours and still did not work on data. TRIED EVERYTHING network settings update/changed APN/turned on and off/reset. Nothing worked. They even added 5GB of data and changed my contract for the remainder of the month which they said should kick it into gear but it did not work at all. Never used my new phone on 3G. Then my bill date came - and it miraculously worked - clearly because the data had been reset. Within two weeks it had run out (no idea how I am very good with data) and AGAIN same issue - couldn’t add moreo2 have been extremely unhelpful and saying the issue is my fault and something is draining my data. My issue is though how can it work fine for 2 weeks and then as soon as I add more within milliseconds of putting down the phone something has sucked all my data? No account issues/nothing they can see is wrong apart from my account says I have used all my data (including the 1GB I called up to add on.) Im waiting for my bill date which is the 24th to see what happens. But o2 have essentially said they cannot help me which is ridiculous. I have changed all my data settings to stop push notifications/background app refresh etc. Any ideas as to why when I run out that is it? Apologies for the long message but its been an ongoing issue and very frustrating.

So its now my bill refresh day. I've immediatley turned off my data so that its not being used. My My O2 says I only have an allwance of 1.09GB when my tarrif says 3GB on a different MyO2 page. WHAT IS GOING ON! How can they then say this is my own fault! (I've screenshotted this) Also a quick question - If i want to get out of my contract without having to wait 8 weeks for them to reply to my complaint, is there any way I can sell the phone myself? Or do I have to hand it back? At the end of old contracts I've always sold myself rather than handing over for 100 quid because I can get more.

Similar Messages

Help needed "tabEnabling" not working in simple login page - Flex

Hello Friends,
I need a small help in Flex. I am doing a simple login page application in FlashBuilder 4.0 & i have kept 2 input boxes like Login,Password and a submit buttion. On clicking the button i am calling a method, so far everything is working fine.... But some how tabenabling is not working. suppose if you are in login inputbox and i press "tab key" it has to go to password input box.. but its not working. can any one help me on this, why it is not working. i have tried all the attempts using tabEnabled = "true". but stil i am failing to do this.
your help would be appreciated.
Rajesh
Message was edited by: Rajeshb_Flash

<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml"
   width="100%"
   height="100%"
   verticalAlign="middle"
   horizontalAlign="center">
<mx:Script>
<![CDATA[
   import com.tel.model.EventConstants;
   import mx.controls.Alert;
   import mx.managers.CursorManager;
   import mx.rpc.events.FaultEvent;
   import mx.rpc.events.ResultEvent;
   import mx.rpc.http.mxml.HTTPService;
   private var httpService:HTTPService;
   public var userID:String = "";
   public function init():void{
   private function mouseClickSubmit():void{
    if(userName.text != "" && password.text != ""){
     userID = userName.text;
     initService();
    }else{
     if(userName.text == ""){
      Alert.show("Please enter 'User Name'.","Alert!")
     }else if(password.text == ""){
      Alert.show("Please enter 'Password'.","Alert!")
   private function initService():void{
    var params:Object = new Object();
    params["userName"] = userName.text;
    params["password"] = password.text;
    httpService = new HTTPService();
    httpService.showBusyCursor = true;
    httpService.resultFormat = "xml";
    httpService.method=URLRequestMethod.POST;
    httpService.addEventListener(ResultEvent.RESULT, httpServiceResultHandler);
    httpService.addEventListener(FaultEvent.FAULT, httpServiceFaultHandler);
    httpService.url = "Login.action";
    httpService.send(params);
   private var boolFirstRun = true;
   private function httpServiceResultHandler(event:ResultEvent):void{
    httpService.removeEventListener(ResultEvent.RESULT, httpServiceResultHandler);
    httpService.removeEventListener(FaultEvent.FAULT, httpServiceFaultHandler);
    httpService = null;
    var resultXML:XML = new XML(event.result.toString());
    if(resultXML.children().toString() == "true"){
     boolFirstRun = false;
     dispatchEvent(new Event(EventConstants.LOGIN_SUCCESS))
    }else{
     userName.text = "";
     password.text = "";
     Alert.show("Login Failed! Invalid 'User Name' or 'Password'.","Alert")
   private function httpServiceFaultHandler(event:FaultEvent):void{
    httpService.removeEventListener(ResultEvent.RESULT, httpServiceResultHandler);
    httpService.removeEventListener(FaultEvent.FAULT, httpServiceFaultHandler);
    httpService = null;
]]>
</mx:Script>
<mx:Panel title="Login Page" width="400" height="300" styleName="loginPanel" verticalAlign="middle" horizontalAlign="center" backgroundImage="assets/images/hello.jpg" backgroundAlpha=".1">
   <mx:VBox width="260" height="95" styleName="loginBox" backgroundAlpha=".2">
   <mx:HBox width="100%">
    <mx:Label width="85" text="User Name" styleName="loginTextStyle"/>
    <mx:TextInput width="150" id="userName"/>
   </mx:HBox>
   <mx:HBox width="100%">
    <mx:Label width="85" text="Password" styleName="loginTextStyle"/>
    <mx:TextInput width="150" id="password" displayAsPassword="true"/>
   </mx:HBox>
   <mx:HBox width="100%">
    <mx:Spacer width="80%"/>
    <mx:Button label="Enter" id="submit" click="mouseClickSubmit()"/>
   </mx:HBox>
</mx:VBox>
</mx:Panel>
</mx:VBox>

Iphone 5 cellular data not working,

iphone 5 cellular data not working, so i reset the all phone settings and it is showing only apple symbol on the screen afer i switched on the top.How to fix this problem

Hold the sleep / wake button and the home button down until the phone shuts off and then allow it to reboot again
Please let us know if that helps

Where can i exchange my not working iphone bought in Switzerland (on july 12, 2012.) that just turned off and not working since. In croatian store they don't want to give me replacement phone!!!!

I have bought iphone 4s on July 12, 2012.in Zurich in offical Apple store (Glattzentrum) and after one and a half months it just turned off and not working since. I tried three charges and nothing (it detects that charger is on but it cannot be charged). So now I have a not working phone only two and something months after purchase. But the problem is that in Croatia we have two apple reseller stores and neither don't want to exchange it, although is under warranty!!!! The closest stores are 250 km from Zagreb...Of course I have contacted Apple store in Zurich but they told me to come in Switzerland or to send credit card data for receiving new iphone, the problem is I don't have credit card with 700 euro on it!!!! what to do?? who to call ??? where to get replacment device cause this is disaster???? I wanted to buy ipad but after all this I doubt to do so...I have not working Iphone payed around 700 chf or 800 usd and cannot change it in my country, is it possible for such vast organization like apple that this things can occur????? So much for customer support

“the EU is considered one country for warranty purposes“
Not the case at all whilst there are harmonized minimum standards governing guarantees, warrantees remain national as these vary (Add to) minimum legal protection.
Some how you need to get your phone back to Switzerland.

Help viewer does not work after update to 10.4.4

Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

PLz help 7key is not working suddenli in my N-73

PLz help 7key is not working suddenli in my N-73 and the 7 is simply displaying on the screen help plz....
Birla

Ok.
It sounds as if something is keeping the key pressed, and that can be down to 2 reasons.
The phone has got wet and the internal key is corroded and fused, making a constant connection
or
Dust or dirt in under that key and are having the same affect
Either one of these reasons will need to be fixed at a Nokia Care Point as it will involve taking the phone apart.
You can find the nearest NCP to you at the Store Locator
Use the drop down list on the right to find your country.
If it is either of these faults, the NCP will probably charge you as it wont be a warranty fault, but a customer created fault.
Hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Just updated my laptop to itunes 10.5,the help feature does not work.also updated my ipad2 3g wifi 64gig to ios5, now none of my purchased apps are working?? please help?

I JUST UPDATED MY ITUNES TO ITUNES10.5 ON MY LAPTOP(WIN7)
THE HELP FEATURE DOES NOT WORK.
I ALSO UPDATED MY IPAD2 3G WIFI 64GIG TO IOS5 AND NOW NONE OF MY PURCHASED APPS WORK??????????

I have seen this before. You need to update the apps in your app store, and once they are updated, they will work again.

Help button is not working in Infoview

Hi All ,
I am working on BO XI R2 environment and help button is not working properly in my infoview.
I can get help files from Admin console but the same is not true with infoview.I got two different server installations, one of them its working fine but not for the other.
I checked for help files in IIS and they are there , even I verified web.config file as well for infoview and it also seems to be correct.
Please advice what could be the reason.
Thanks,
Vivek.

CLOSED

F4 help key does not work in ESS on ITS in Portal

Hello All,
F4 help key is not working in all iviews in ESS in Portal.When i try to press it nothing happens and no pop up appears,kindly please suggest wt might be the cause of this error? Iam tired struggling with this issue and not able to trace out reason for the same.My Email Id is [email protected] .Plz revert at earliest.
regards,
Saumya

Hi,
This kind of problem is known when webgui is being started from an IAC, e.g. HRWPC_FC_EXEC
You have to set parameter ~webgui_popups 1 in the service file of this IAC.
BR,
Disha.
Pls reward points for helpful answers.

In P6 P6 Help link is not working

Hi,
My P6 help link is not working in help menu.
P6 Library and Support link are working.
As suggested in another discussion i tried to update link in Admin>Application setting and restarted weblogic, But system is still taking some other link than i defined in application setting.
Can anybody help?

Hi,
We worked on this issue ,
Solution:
In the P6 EPPM Admin application in the corresponding configuration, In P6 Help url we have modified the url from http://hostname:8203/p6help/help to http://hostname:8203/p6help/ and we restarted the P6 server in weblogic console.
Then everything fine now,
Regards
Kumar

I want to hand on my water damaged and not working iPhone are the notes that were on the handset accessible to anyone who can get the handset working again?

I want to hand on my water damaged and not working iPhone are the notes that were on the handset accessible to anyone who can get the handset working again?

It's possible, I suppose. Unlikely, but possible. Someone would have to be extremely driven to fix your broken phone specifically to look at your notes though.

Help front camera not working on my sons iPod touch 5g

Help front camera not working on my sons iPod touch 5g

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Wireless not working, iPhone 4S, upgraded to OS6, any suggestions?

wireless not working, iPhone 4S, upgraded to OS6, any suggestions?

Take the troubleshooting steps recommended in the User Guide.

My Help Viewer is not working for mac help

My Help viewer is not working for mac help. Everytime i choose mac help the window opens then closes. But when i open another help like safari help it opens and works fine. If i switch it back to mac help the window just closes and the application quits.
If you know how to fix please telll!

noname212,
Using "Search Discussions" with the term "Help Viewer" you will lead you to numerous posts which refer to Troubleshooting Help Viewer by Dr. Smoke.
Good Luck
;~)

HELP NEEDED Data not working IPhone 6 3GB

Similar Messages

Maybe you are looking for