Help to link buttons together

I got 9 buttons thats needs to work together.
When pressing Bench PWR. The Bench PWR. and OFF goes ON.
When pressing NO LOAD, OFF buttons goes off and Bench PWR. stays on.
When pressing 200VA Unity, NO LOAD goes off and Bench PWR. stays on.
And sow on, the Bench PWR. button must always stay ON, and the other buttons must change.
When pressing Bench PWR. to OFF all buttons goes off.
I also want all the buttons abow Bench PWR. not to work if Bench PWR. is not ON.

Hi Kimlorentz,
If i well understand the requirement why you are not planning to use radio button.
Look the attached VI.
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!
Attachments:
Link Buttons Together.vi ‏14 KB

Similar Messages

Help with linking buttons to Scenes

Hey,
Rookie to Flash and AS3. Just needed some help with my buttons. Im making a flash program about pancakes (random I know). I have a "Mainmenu" scene and then a "Recipe" scene. I have a button on my mainmenu which takes me to the recipe page when I click it, the code behind the button is
"stop();btn_recipe.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);function mouseDownHandler(event:MouseEvent):void {
gotoAndStop(1, "Recipe");
Then when I arrive at my recipe page I have a button which will take me back to my MainMenu, the code behind that button is:
"stop();btn_home.addEventListener(MouseEvent.MOUSE_DOWN, mouse5DownHandler);function mouse5DownHandler(event:MouseEvent):void {
gotoAndPlay(1, "MainMenu");
So I run my program and the first button works and takes me to recipe page but the button to get to the main menu does nothing, click it and no response or anything
Please help

First, hopefully having all your code mushed onto the same line is a copy/paste error, otherwise it should look like...
stop();
btn_recipe.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);
function mouseDownHandler(event:MouseEvent):void {
     gotoAndStop(1, "Recipe");
If the intention is to click the buttons to make them work, then you should use CLICK instead of MOUSE_DOWN. MOUSE_DOWN can be a persistent state whereas CLICK involves releasing it afterwards.
As for the code to get you back home, where is it located on the timeline? Are you getting any error messages when you try to use it?
One thing you should learn to use is the trace() function. It is useful for troubleshooting. You can use it now to see if your second button is talking to the function at all...
stop();
btn_home.addEventListener(MouseEvent.CLICK, mouse5DownHandler);
function mouse5DownHandler(event:MouseEvent):void {
     trace("the button works okay");
     gotoAndPlay(1, "MainMenu");
If you don't get that message in the output panel, you'll know the button is not properly coded to work.
Most folks here will recommend you get away from using scenes in a design that includes navigation--they have a history of being problematic. Instead of using scenes, divide the one main timeline up into sections or use movieclips for the sections and manage their visibility... or do a bit of both.

Need help with linking buttons

Can anyone help me with this problem I have.
I have a gfx which I have created 6 shapes and converted them into simple buttons. I have urls sat inside an xml file. How can I get the buttons to use the urls set from within the xml file?
Also how can I change the current external photo that is being loaded to load the url from a setting in the same xml file.
I hope you arnt as confused as I am right now.
I have packaged up the flash file which includeds the xml aswell.
If anyone could help me out with this I would be very greatful.
Thanks All
http://www.onlineaddicts.co.uk/menu.rar

Remove the code from all btns, as below paste it on main timeline
Also no need to load xml twice as dome in image container...
give an instance name to the outer container of btns - menumv
use following method to openURL, use same for all the btns..
import flash.events.Event;
import flash.events.MouseEvent;
import flash.net.URLLoader;
import flash.net.URLRequest;
var myXML:XML;
var myLoader:URLLoader = new URLLoader();
myLoader.load(new URLRequest("links.xml"));
myLoader.addEventListener(Event.COMPLETE, processXML);
function processXML(e:Event):void
myXML = new XML(e.target.data);
trace(myXML);
menumv.carbtn.addEventListener(MouseEvent.CLICK, openURL);
function openURL(e:MouseEvent):void
navigateToURL(new URLRequest(myXML.car.url));
http://www.darshanrane.com

Help Needed - Linking databases together

We are currently developing a new system for a client that uses oracle text to search through a number of columns and uploaded documents (as clobs). We expect that the client will require a high level search that not only goes through columns in this database but a previous database that also includes documents. There is also a chance they might implement oracle drive, therefore documents in here will also be searched through.
Does anybody have any ideas on what the best solution for this is. I have considered using database links but im unsure if this will be affected by multiple users. Are materialised views an option worth considering.
Any help regarding this matter will be greatly appreciated.
Regards
Kevin Mann

I really need some help regarding this issue. If anybody has any ideas please post a message.
Regards
Kevin Mann

Please Help with linking buttons to media

Hi,
I'm creating a virtual tour of my site and i have a couple of
things i'm stuck on. I've done an intro, and after that 6 buttons
roll in which you can click on that open up videos. I need the end
of the intro to now be 'frozen' or looped or something. How do i do
that? I've worked out the action script so that you click on the
button and the video plays, BUT how do i make the video invisible
before you click the button? At the moment it's just on the screen.
I also need each button to simultaneousy open up two mp3
files...what's the action script for that? I've been using script
assist and i'm stuck.
Thank you.

Hard to explain without seeing what you accomplished so far.
For the intro either add a keyframe then add either a stop action
or a gotoAndPlay action. For the video give the player an instance
name, then use actionscript to make it invisible. There are
tutorials on this forum for adding sounds to buttons:
For the MP3 issue here are some tutorials (thanks Chris G):
http://www.kennybellew.com/tutorial/
and
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=194&threadid =1106533&highlight_key=y&keyword1=attach%20and%20sounds%20and%20button

Ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device

My grandsons new Apple refurbed 35g ipad keeps locking up with a black screen amd nothing else. I have reset it many times pressing the home and off buttons together but uit keeps locking up. Help,please!

My grandsons new Apple refurbed 35g ipad keeps locking up with a black screen amd nothing else. I have reset it many times pressing the home and off buttons together but it keeps locking up. Help,please!

Thank you for trying to help. I followed your instructions, it took 6 hours to download, and then said it could not solve the problem (something to do with error 9?). It will have to go back to Apple - its only 3 days since it came out of the package and its very disappointing for him. Looks like I have to hang around in the Apple store in Plymouth all tomorrow until they can fix it, or will change it. Thanks for your help.

My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

Hello Kimbo1991,
It sounds like your phone is not successfully booting even though you have reset the device. I would next recommend attempting a backup and restore to iTunes with this article:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
If you are unable to restore with iTunes I would next put the device into recovery mode, and attempt the restore again:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Regards,
Sterling

My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?

My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?
Have not backed up for months, so prefer not to lose the data.
Thank you for your help in advance.

Restore iPhone with iTunes on computer. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time of holding both buttons. Click the Update or Restore button that iTunes offers.

My iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?

my iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?

Try the remaining items in the white-screen topic of.
iPod touch: Hardware troubleshooting
If not successful. let the battery fully drain and then charfe for an hour and try again.
Frequently a white scree nis due to a hardware problem.

I press the swtich off and menu button together, but still can't on and sync my phone! can anyone help me? please...

I was prepare to update the latest facebook app, but on the half way suddenly stuck... i can't press any button! i can only press the swtich off and menu button together for restart my phone, and of course turn into full black screen and the apple comes back again to the screen and for a really long time. I did try to sync to my laptop but it can't work, the apple stay there forever. Can someone help me?

OR RECOVERY MODE
Recovery Mode
1. turn off the iPhone.
2. connect the USB cable to the iphone.
3. press the home button (the large round), and press and hold connect the other end of the USB cable to your PC.
4. continue to hold pemuto the home button.
5. within about 8/10 seconds will appear on the screen of the phone USB cable + iTunes.
6. your iphone is now in recovery mode.
7. will open automatically iTunes you will detect an iPhone in recovery mode.
To return to normal mode you just hold the home button + shut down: the Apple logo in about 1 minute and the iphone will reboot.

HT201412 my iphone 4 is not turning on even after long pressing home and sleep/awake button together. plz help me to resolve this issue bcoz i am unable to use my phone.

my iphone 4 is not turning on even after long pressing home and sleep/awake button together (about 10-60 sec).

Crap. That's what I was afraid of...Well, since I'm away from home and not near my pc, it sounds like I'm out of luck. The problem is that I need my phone to be at least functional for making and receiving calls. There's an apple store nearby. Perhaps I can go there and have them restore it and at least I'll be able to make and receive calls until I get home and restore from my backup. Does that sound feasible, or am I missing something?
P.s. I tried to click "correct answer" and accidentally hit "helpful". Sorry about that...

Iphone5 stuck. Won't go past Apple logo. Sleep/wake and home button together don't help. Connecting to iTunes also does not wo

MY iphone5 is stuck on apple logo. Sleep/wake and home button together don't work and connecting to iTunes doesn't either. Anyone any ideas

You need to hold both those buttons down for several seconds, until the Apple logo reappears. Don't release until then.

Help with linking a button?

Ok, so I'm making a small little choose your own adventure
type game in flash, just using buttons to navigate between the
screens, fairly simple. I have the first frame with two buttons,
one links to start, the other links to info. the second button
works fine. when i launch the start button, it takes me to a movie
clip on the third frame. this clip plays till it gets to frame 75,
where i have actionscript follows.
getout.addEventListener(MouseEvent.CLICK, getoutclick);
function getoutclick(e:Event):void {
gotoAndPlay("home");
getout is a labeled instance of a button in the library,
which I want to take me to the next frame, but for the moment I
just want it to replay so I know that it works, which is why it's
linked to "home" now.
Every time frame 75 loads, i get the following error.
TypeError: Error #1006: addEventListener is not a function.
at Symbol1/::frame75()
I used the same method to link buttons on the first frame,
and now it isn't working on this one. Any ideas?

check Symbol1 for a stray line of code.

Trouble with Linking Buttons to Articles in Other Folios

I am very new to DPS as in I just started working with it less than a week ago. My main problem now is linking buttons from one page in a Folio to another.
My set up right now is this:
I have a folio named "Cover" that has the landscape and protrait version of the articles.
I have a button placed on the articles that I want to link from Cover to a folio named "Menu" which also has both orientations
I understand the 'navto://', but I am not clear on how you connect folios of the same project.
Reading through the Adobe tutorials definitely walks me through setting this up, but not how to make it all work together easily.
Thank for any help.
-Frank

Your terminology is somewhat confusing.
My best bet is that you want to link from a certain page in one article (e.g. "Cover") to a certain page in another (e.g. "Menu").
If that's correct, then
navto://Menu or navto://Menu#0
will send you to first page of "Menu" article
navto://Menu#1
will send you to the second page of "Menu" article
navto://Menu#2
will send you to the third page of "Menu" article
and so on...

Help to link buttons together

Similar Messages

Maybe you are looking for