HELP vibrate and auto brightness :(. ios 6

This is depressing.

I agree.
What you can do is the following:
For auto-brightness:
Go to Settings > Brightness & Wallpaper > Auto-Brightness > Toggle ON/OFF.
For vibrate:
Go to Settings > Sounds > Vibrate on Ring/Vibrate on Silent > Toggle ON/OFF.
I hope this helps. Good luck!

Similar Messages

  • Map and auto brightness problem

    i have problem in my IOS6  after i update,  my  auto brightness is not working  and my map also is not working cannot determine my location after i update please help thanks
    Ipad 3rd gen.

    I have the same problem when i update my IOS 6 on iphone 4s.Can anyone help me how to work on the maps.

  • Optimal Brightness and Auto Brightness

    What are you guys finding to work best, the auto brightness and leaving it as it came from Apple (in the middle) or adjusting it yourself..I tend to leave it on full brightness...and I know this impacts battery life, but wanted to see what you guys thought.

    I still can't figure out how the whole auto brightness works. you can still set the brightness and then leave auto "on"
    So does it just try to automatically keep the brightness "medium bright" if you have it set to medium and "auto" or what? I haven't been able to see any automated brightness adjustments at all. I tried going from a really dark room to a really bright room to see if I could tell if it was auto adjusting. I couldn't tell. maybe I'm doing something wrong.

  • Brightness slider and auto-brightness

    Can someone explain how this works?
    What role does the brightness slider play when auto-brightness is enabled?
    It seems to affect the brightness, but I haven't quite figured it out...
    Thanks,

    Probably the zoom feature enabled, double tapping with three fingers will bring back the screen to normal size again in that case.
    To find out if the brightness issue is software related, set your device back to factory settings, without using the latest backup.
    If the brightness sensor works after that, use the backup to restore from. If the problem is coming back, your backup contained corrupt data.
    Also take your protective case or film on your screen off, just to make sure nothing interferes with the sensor.
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • IPad Air brightness changing with auto brightness off.

    I Have an iPad Air and the brightness is set to maximum and auto brightness is turned off.  After using the ipad the ipad brightness will increase dramatically and stay like this for anything up to five min, then it goes and reverts back to what it was. This all happening with auto brightness off. It's not overly dull and somewhat bright but after seeing the brightness go up further it looks a lot better. I have rest the ipad, reset the settings, checked the auto lock feature and calibrated the auto brightness feature. The only thing I haven't done is a fresh install of the Current iOS 7.1.2
    Any suggestions as to why this is happening would be appreciated or if anyone has encountered the same problem.

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Apple - Auto Brightness Is Not Right - 32GB 3G S

    Not sure if anyone else is having issues, but my phone brightness is left at the default middle level and auto brightness is left on. However, with auto brightness on - it's making the phone too dim and harder to see. I have to turn auto brightness off to make it better.
    Anyone else have this problem? I never had this issue with my 3G.

    Set your brightness to medium - middle. Turn on auto brightness.
    Then...
    Go in to a bathroom, keep the lights off and close the door. Put the phone to sleep (press the power button real quick) then when it clicks off, press the home button then slide to unlock. It should adjust and be dimmer. This is how I know to "force it" to do that.
    You can also take a flashlight and shine it directly on the phone to the left of the earpiece (that is where the sensor is). Your screen should go full brightness pretty quickly.
    If this does not happen - your auto brightness is not on or your phone is defective (bad sensor).

  • Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

    Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

    Hello,
    Same problem for me. Really a pain in the *** this bug ! Does Apple fixed it. I'm really suprised noone reports this problem  and apple does not adress this.
    Because of that, I cannot give it anymore to children because it hurts the view. Really a shame on the part of apple !
    Regards

  • After i made update to ios system the auto brightness for screen is not working any more although i am turning it on

    Before i make update the auto brightness was working properly
    The screen was very low bright in the dark automatically and high bright in light
    But now after i made update it is nit working
    I am surprised that apple system is not stable
    Please support
    <Email Edited By Host>

    This is a user to user support forum and not Apple employees so it is best to not post your email address in an open discussion group.
    Have you tried a reboot of the iPhone?  Hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.
    My iPhone went to full brightness all the time after updating to iOS 6.1.3.  A reboot seems to have helped make it work as it should.  Also check Settings > Brightness and Wallpaper and see how it is set, reduce the brightness level it is too bright for you.

  • Help! I just downloaded IOS 7, and had to download from itunes...however ow whe nI put in my password for my wifi connection...it doesn't accept it....how do I change the password? How do I access my wifi connection again????

    Please give me simple directions to reset a password to m wifi choice...since I downloaded the new updates for IOS7, yesterday! My ipad was frozen, had to go to Itunes to restore it, after it was restored, I went to go on my wifi .....and it won't accept my password...nor will it allow me to make up a new psassword....now what do I do??

    The correct password is printed on the route's label.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • IPhone 5 with iOS 8 - Auto Brightness too dim / dark

    Hi all,
    I just updated my iPhone 5 to iOS 8 and the auto brightness makes the screen too dark and hard to read.  This was not an issue with iOS 7 on my phone.  I've tried using some of the calibration tips online, but none seem to help.
    When I am outside, it's fine, it will automatically adjust the brightness all the way up.  The issue is inside, then the auto-brightness will make the screen too dim to be able read very well.
    I know I could turn off the auto brightness feature and manually adjust the brightness, but I really liked the feature with iOS 6 and iOS 7.
    Is anyone else having this issue?  Any tricks I could do to fix this, or is this just an issue with iOS 8 on iPhone 5s?  It would be nice if Apple gave us more control with auto brightness, like maybe letting us set the min and max brightness when it is on auto.
    I did see this post from jedi31780 where his iOS 8 auto brightness isn't adjusting at all, but other than that, I haven't see any other posts online about this yet.
    iOS 8 Brightness
    Thanks

    Thanks!  I went into settings under brightness when I was in a room where I felt the iPhone was too dim and I moved the brightness up till I was happy with it. it now uses that as a baseline and adjusts from there instead of where it was before, so no longer too dim. I thought I already tried that before, but either I adjusted it again to thy the calibration steps, or maybe I adjusted it from the "control center" screen and maybe that one doesn't save.
    Either way, all is good now. Thanks for the tip!

  • Auto Brightness and Notification Sound Problems

    It seems after I upgraded to iOS6, my auto brightness as well as the "click" sound when I shut my smartcover is no longer working. Also, it seems as if my notification sounds are not working properly either.  I've checked my settings and everything is on as it should be. Oh, and I'm experiencing this on the new iPad 32GB. HELP!!!!

    I, too, am having difficult is with my Galaxy S6 contact specific message tone as well as vibration pattern. I have multiple LED colors for different items. I use the fingerprint for security and no issues there. Sure hope Verizon comes out with an answer soon. Don't like the Samsung message app, but may be forced to use it, so I can signify different vibrations/tones.

  • My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

    My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

    I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
    Along with the original poster, I'd appreciate any help.
    As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

  • The auto-brightness of my iPhone is not working, and my system is really unstable. What is Apple going to do about those bugs?

    I would like to know when Apple will fix these terrible bugs of the last software updates. My phone isn't working properly. I'm considering the idea of getting another smartphone...

    If your system is unstable, you should consider restoring your device through itunes to get a fresh version of the operating system.
    If your auto-brightness isn't working, it's possible that there is an issue with your phone's ambient light sensor which is hardware and not affected by an iOS update
    Are you using a case? if so, it's possible that you're using one that was made for an iPhone 4 instead of a 4S which has an ambient light sensor that is a few millimeters to the left, so some iPhone 4 cases could cover it slightly, causing the ambient light sensor to not work as affectively

  • Auto brightness not working in iOS 5.0.1

    Auto brightness on iPad 1 not working properly? Well known bug? Battery level is also terrible.
    Any ideas?

    The same problem on my ipad2 in ios 5.0.1
    1. with smart cover
       - set autobrightness on and bright level  half ,  no password
       - close smart cover and open cover
       - ipad2 screen is very dark and does not change until power off &amp; on
    2. No smart cover
      - does not change bright in any places(dark room, sunlight, living room etc)
    But no battery problem on my ipad2

  • HT1766 Where is my old backup stored? Because of auto backup, I can't see any of my older ones and with new ios erased all my data and it kept backing up the "new" setting

    I plugged in my iphone and then itunes says my iOS was old and need update. Hence I update it to 7 where it erased all my data to start with, and it was actually backed up before it was erased.
    After the new iOS was installed, it just couldn't restore the old data and instead it kept auto back up the new setting.  I called apple help line and the guy said whatever is on the itunes list is all there is. But because of the auto backup, the whole list is full of new backups without my old stuff. Is there anyone who can tell me whether these files are overridden or instead just not showing on itunes, and where can I find it?
    Thanks lots

    When you restore a device, a new backup is created and the old backup has a date added to the backup name.
    Look in iTunes prefs > Devices.
    The current backup will not have a date in the name. It will show the date on right side.

Maybe you are looking for

  • Business area not defaulted for tax line item

    Hello Friends, I am posting Customer invoice, when I simulate the invoice that time Output tax is automatically calculating the tax. My problem is, in the Output tax line item business area is required field which is appearing in display mode. T code

  • Restriction in menu path access

    Hi all, I have just been assigned to limit access to menu path <i>List->Save->File</i> from the output of an ABAP report. Tcode has also been assigned for this report. I was able to access PFCG but I'm not too familiar as to how I could limit access

  • BE[Elect], MBA[SCM], 4 yrs Exp as BD. Totally confused about which SAP module

    Hello, Niranjan here from Mumbai. i am currently working as Lead member, Business development in engineering company for past 4+ years. Prior i have completed my BE from Mumbai university & MBA in supply change management. Now i am planning to have a

  • Como recuperar copia de seguridad antigua

    hola él Restaurado mi iPhone5 y los antes de acerlo le Hice Una copia de Seguridad, al intentar Restaurar la copia me salta ONU Mensaje Que los dados; la copia de Seguridad no Se Puede PORQUE HUBO UN Restaurar Fallo al Realizar la copia. ENTONCES él

  • Network i/o metric meaning

    In the supermetrics page in vROps I see a metric called network i/o -> 4000.  What does the "4000" metric refer to ? Thanks!