Help with Editable Regions

We are in the process of creating a template for our site. We
are working on the editable regions. What we are finding is if we
want to add a bulleted list of items (let's say links) we can't do
it without the list header also becoming bulleted. For instance
let's say we have the following:
Medical Resource Links
Cardiology
GI
Respiratory
We would want Medical Resource Links to be bold and stay to
the left. The other three items we would want to have bullets.
When we try this in an editable region all four items move
over and only the first gets the bullet. Do we need an additional
editable region for the title? Is this controlled via a CSS? Any
help you can give would be greatly appreciated. We are beginners
with this. Thanks.

This has nothing to do with editable regions. It's all about
the HTML on
the page.
Show us the HTML for your list, and I'll tell you why it's
happening the way
you describe.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"DONNA6985" <[email protected]> wrote in
message
news:edme63$o0m$[email protected]..
> We are in the process of creating a template for our
site. We are working
> on
> the editable regions. What we are finding is if we want
to add a bulleted
> list
> of items (let's say links) we can't do it without the
list header also
> becoming
> bulleted. For instance let's say we have the following:
>
> Medical Resource Links
> Cardiology
> GI
> Respiratory
>
> We would want Medical Resource Links to be bold and stay
to the left. The
> other three items we would want to have bullets.
> When we try this in an editable region all four items
move over and only
> the
> first gets the bullet. Do we need an additional editable
region for the
> title?
> Is this controlled via a CSS? Any help you can give
would be greatly
> appreciated. We are beginners with this. Thanks.
>

Similar Messages

Help with Editable Regions and Image Swap

I need some assistance for a project I am working on, and I don't know a short way to describe. Hang with me, here it goes....
I am working with the sites 'Navigation' links. I want to use a MouseOver behavior so that the image swaps when moused over. I want the MousedOver image to remain when you are on that page. I can manually make this happen, but I am running into difficulty because I want the Navigation to be located in an un-editable region so when I add new pages, the entire site will update as I make changes to the template.
I don't know how to create this effect without manually swapping all the images via behaviors on each and every page, and when I need to do these edits, the region needs to be in an UnEditable region so that the template will update all the pages.
I guess the question is, how can I customize images from page to page in an Un-Editable region in a Template driven page?
Thanks.

Image swaps are clumsy for navigation because you have to re-craft your menus every time you edit your site. This gets very old in a hurry.
CSS styled menus are not only easier to maintain in DW they are web friendly for all devices -- especially Smartphones who may have images disabled to save on bandwidth charges.
DW comes with Spry Menus which you can customize with CSS
http://labs.adobe.com/technologies/spry/samples/menubar/MenuBarSample.html
Additionally, there are some excellent DW extensions you can use to build professional looking CSS menus in seconds.
http://www.projectseven.com/products/menusystems/pmm2/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Help with Editing Raw in Lightroom 3.6

Hello everyone!
I am new to the forum and also to using lightroom. I just need some help with editing my RAW files. I shoot in RAW + JPEG and I just imported the files to lightroom. It didn't show me the jpeg files for importing so I only imported the RAW files, which I needed. After editing, I realised it said CR2+JPEG. Which means that both files were imported but combied into a single one. Now I basically want to edit my RAW files only. Does that mean I have edited a jpeg or a mixture of both files? How to edit only the RAW file?
If my picture says CR2+JPEG, does that mean it isnt a pure RAW file and the editing would affect the image quality?
I will really appreciate some help!

It imported both, but only shows you the raw file. Ever. What you see and what you edit will only be the raw file. The associated JPG file will follow the raw file around if you move it or rename it using Lightroom, but other than that, Lightroom will ignore it. You could safely delete the JPG, and Lightroom wouldn't complain--probably wouldn't even notice.
There's a preference you can set that will cause JPGs to be imported as separate images. Then you'd be able to see both of them and edit them separately. That preference won't take effect on images that are already in the catalogue, but will affect all future imports.
Hal

Help with editing a template flash file..

FIRST OFF..please don't shoot the noobee..I know some folks
don't like the templates and I appreciate that.
I have done some reading but not a whole lot about Flash. I
certainly don't want to BUILD a flash (not yet), but want to edit
one that is included in a template. I only want to edit the header
that drops down. It says The Web STudio. I, for example, want it to
say Marks Studio.
Ok..the temp comes with Flash/non flash.
I open w/flash and have a 3 folders: flash, psd and html.
-flash folder has Images, fla doc and one flash html file
-PSD folder has 3 psd files
-html folder has flash folder, images folder, css file and
one single index.html file.
I opened the flash folder and found the image.jpg I wanted to
change to Marks studio.
I opend the PSD and found the slice that is the same as that,
then edited it like I want it in PSD, then saved to replace the old
image. top1. jpg
Still, it is the same ole one that came with the temp.
as I said, please don't shoot the noobe. I just wanna edit
the flash file.
Thanks for any help.
Mark

You'd need Flash to edit the FLA file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"snipingkid" <[email protected]> wrote in
message
news:enev5r$p8l$[email protected]..
> Hey guys,
>
> I need some help with editing a flash template, I have
the .swf, .fla, and
> .html file of this thing, I would like however to edit
something on it....
> Ive
> tried everything, I have access to photoshop and
dreamweaver 8... Im not
> any
> good at it but with decent help I could get something
done. What I would
> like
> to edit is just text that flies in.... I would like to
edit the text, how
> do I
> do it.... Thanksj
>

Quick Question regarding an error with editable regions

Hello,
I am a co-op student and I work with other students as well, on our large company website. I have always been considered the cheif coder, and nobody knew the wesite layout and file directory as well as me. However, something terrible has happened while somebody was updating some information on one of your HTML pages.
I logged in to Dreamweaver CS3 on afternoon to make a very simple text error change on our website. As soon as I hit "synchronize sitewide", it stated that there was no synchronization necessary, although I had already made a change. So then, on the template (.DWT) page, I thought I would backspace any character, and then retype it again in order for the "save" option to appear, so that I could save the template, and have it update all HTML pages, as well as the page that had just said "no synchronization necessary". I thought that I had to update the template first, which was strange, as I never had to do this before.
When I clicked update, the error message that I got was that I have placed an editable region inside of a block tag. I checked the HTML pages as well as our template (.DWT) pages, and indeed, the "Page Header" was embedded in a <h1></h1> pair. The pair appears black and delete-able in the template files, and grey in the HTML files, which is expected. However, I have been working at this institution for four months, and I recall that the <h1> tag pair had always been there since I remember. (How badly did this other person mess up?! =S)
I tried to delete it from the .DWT file (the small editable region, and the <h1> tags), and now, what happens is that if I try to save a template so it updates all other HTML pages before synchronization, the template simply does not update anything, and I get no message whatsoever after clicking Save.
Any help would be greatly appreciated. Thank you in advance for coping with these many details. I simply want to be able to update HTML pages again, because my boss really needs it, and I have never had such a problem before (having made much larger changes to this same website in the past)
Thanks again,
Mr. V

How many child pages are you supporting with this DWT? Hopefully less than 50 pages.
Is your code valid? HTML Validator - http://validator.w3.org
Can you post a link to your DWT page, or copy and paste your code here?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Please Help Nested Editable Region Image & Spry

Please Help Me.
New to Dreamweaver. I've been given a "grandchild" nested temple with only one editable region to alter. I've read and Googled since Saturday. My brain actually hurts.
Goal
- Insert my background image into region
- Add Spry accordion to mid left
- Add Spry collapsible to bottom right
How can 3 things be so hard? Please, can someone walk me through this? Thank you

I've been given a "grandchild" nested template with only one editable region to alter.
Nested templates. Aaaaaak! There's no advantage in nested templates, ever. They're so problematic it makes my head hurt just thinking about them.
If you have the parent and grandparent template.dwt files to work with, you'll need to insert Editable Regions to hold your scripts and other supporting widget code.
If you don't have those files and you can't edit the <head>, you can't insert widgets into Template child or grandchild pages. You'll need to detach the page from Templates.
Nancy O.

Help with editing a cell in a JTable. DESPERATE

Hi! Is there someone out there that could help with some source code for editing a cell in my JTable when I run it as an applet??
It works fine when I run it as an application.
I manage to select the row and write a number in it, but I can't get out of the cell (it seems that the program stops??). I want to enter an integer in a cell and when I click enter or with the mouse in an other cell the value that I enter should update some other cell( multiply the entered value with some fixed number and update a cell in a second coloumn)
I am really desperate now..... I have thought about using a MouseListener....
I am using a tablemodel that is from AbstractTableModel.

Are you using some cell editors?
While converting inside them, you might be getting some exceptions (like parseexception)which is stopping you from proceeding further.
Are you using your own tablemodel with custom datatypes?
Hope this helps,
Ramkumar

Site with editable regions won't allow editing

Hi, I have set up multple sites for InContext Editing. All works fine except this last one that won't allow editing online. When clicking "Edit Page" I get a message saying "There are no editable regions." I have checked and double checked the pages and the regions are there. I've reflowed the content into all pages (template) but I still get the same message in InContext.
Please help me figure out what's wrong and how I can get the pages editable.
Here's a link to the website http://www.nolimithockey.com
Let me know if you need anything else in order to help me figure this out.
Thanks a bunch!
Hanna in Tahoe

i'm done, thank you
2009/10/19 Dan POPA <[email protected]>
>
InContext Editing can edit only the elements having the ice:editable
attribute set.
Your page should contain something like this:
>

<div ice:editable="*">
some editable content here
</div>
>
But there are no such elements in the
http://www.nolimithockey.com/index.html page.
>
You say you can see the ICE regions in that page so I can only assume that
you didn't upload the file on the FTP server and you are looking at your
local version of the file, not the one from the server.
>
Another possibility is that you mistakenly treat Dreamweaver Template
Editable Regions as InContext Editable Editable Regions.
I can see that there are DW editable regions in your page: the elements
located between the  comments.
>
>
You can create ICE editable regions by selecting in Dreamweaver an element
and applying the Create Editable Region command under the DW menbu Insert ->
InContext Editing menu, see the image:
>
http://forums.adobe.com/servlet/JiveServlet/download/2242-505554-2323206-23866/create_ice_ er.png
>
Please let me know if any of these were of any help to you,
Regards,
Dan Popa
>

Need help with editing flash

Hello everyone, I'm really new to flash and I have some problems with editing my flash file. Currently, I have a small flash application in a folder, containing various kinds of files such as AS, SWF, FLA, HTML. What I want to do is to change the text inside one of the buttons in the application. After doing some reasearching, I realized that I should probably make some changes to the FLA file(Quiz.fla for example) since Quiz.fla is the only FLA file in the folder. Therefore, I opened it using Adobe Flash CS5.5, what what I found out is that the Quiz.fla file is really different from other FLA files. It only shows a plain background when I open it, without showing the actual interface of the flash application. It does contain all the buttons and contants under the Library section on the right side of Adobe Flash . When I try to change the text inside the button then save-publish, the newly published SWF file would just be a static picture of the button I've changed and everything else is gone. Any help is greatly appreciated!

ya, that's why I'm confused. I've actually tried editing some sample flash FLA files and all I need to do is to edit them in the Library and it would work out. But this one seems to have some weird problems. I could actually send the application folder to you if you have some time to take a look at it. Thank you very much again for the help!

Help with "edit in" most items grayed out

I am not able to use anything but Edit in Photoshop and open as a smart object under "photo" in the drop down dialog. Please help me so that I am able to edit in Camera Raw, merge to Panorama, HDR, another application and open as layers from Lightroom.
I currently have Lightroom 2.0, Camera Raw 4.5 and I just installed the upgrade patch of Photoshop CS3 so I am using 10.01. I thought that maybe this patch would work....but to no avail. I am using XP Pro for Windows. I re-loaded my entire system and decided to only install 2.0.... rather then 1.4 and then 2.0 as I was having problems with Lightroom this way as well. Thanks so much I really appreciate any assistance with this issue.
Ruth

Thanks so much. Actually that is a good point about selecting multiple photos. I had not done that as I didn't think that the program was working so I was editing through Bridge. Also Ian I will try the upgrade and see if that fixes the problem. I use Camera Raw all the time so I was really discouraged when it didn't show up after the CS3 patch. I will keep you posted as to whether your suggestions worked or not....thanks for your quick replies Rob and Ian!!!

Newbie help with editing files in DW CS3

I am new to using Dreamweaver, and I am having trouble with
trying to edit existing files using DW CS3. When I open an existing
file on my local site, DW converts some of the code using &.
This is a problem because I need to edit the file just as it was
originally written, so I can save it after editing and upload to my
website.
In my Preferences, I have Code Rewriting set to:
-Rewrite Code: Fix invalidly nexted and unclosed tags
[Unchecked]
-Rewrite Code: Rename form items when posting [Checked]
-Rewrite Code: Remove extra closing tags [Unchecked]
-Never rewrite code: In files with extensions .as .asr .asc
.asp .ascx .asmx .aspx .cfc .cfm .cfml .config .cs .ihtml .js .jsp
.php .php3 .vb .xml .xsl .xslt .xul
-Special characters: Encode <, >, &, and " in
attribute values using & [Unchecked]
-URL encoding: Do not encode special characters
-Active Content: Insert using browser-safe scripts [Checked
by default]
-Active Content: Convert tags to scripts on file open
[Unchecked]
Today, I opened a file with an .xml extension, and DW rewrote
the special characters > and '. Since I have in my preferences
to Never rewrite code in .xml, I don't understand why DW is
rewriting the code. Also, in my preferences I have unchecked the
Special Characters, so why is DW still rewriting the code?
Do I have some of the Code Rewriting preferences set wrong?
Is there another place I need to tell DW not to rewrite
existing code?
Thanks for your help!
Cyndi

It imported both, but only shows you the raw file. Ever. What you see and what you edit will only be the raw file. The associated JPG file will follow the raw file around if you move it or rename it using Lightroom, but other than that, Lightroom will ignore it. You could safely delete the JPG, and Lightroom wouldn't complain--probably wouldn't even notice.
There's a preference you can set that will cause JPGs to be imported as separate images. Then you'd be able to see both of them and edit them separately. That preference won't take effect on images that are already in the catalogue, but will affect all future imports.
Hal

PSE 8 - Help with Editing Group Layers

I am working with some templates right now that are apparently set up in Grouped layers. I've looked into it, and the best result I can find is that I hav eto "simplify" the group in order to be able to edit the layers. That doesn't seem to allow me to edit the layers individually, though.
If layers are "grouped," does that mean I can't edit the layers? Please Help!
Thank you!

Here is an action someone made just for that.
http://www.elementsvillage.com/forums/showthread.php?t=48026&highlight=layer+groups
This action opens the layer groups by deleting the layer group (set) while leaving
the layers inside.
So the layers will no longer be in layer groups (sets), but at least you will be able to see
what's inside the layer groups and edit those layers.
MTSTUNER

Help with editing audio files (please)

hi there,
firstly sorry for posting in this section but i had no idea where else to do it.
i recently went to an acoustic gig and recorded some songs from it using a sony ericsson phone. i have blue-toothed the files to my mac. there are a few songs on each recording are two things i would like to do with these files.
1. i would like to split the files so they are separate for each song.
2. i would like to try remove as much background noise as possible i.e. crowd making noise, or at least focus it on the actual music being played.
i have download audacity but have no idea. i am looking for a possibly free way to do this and simple too. i am not going to go hardcore with the editing, just want to do it quick and easy.
any help much appreciated, thanks, ravi.
Message was edited by: irav_86

You need to import your song to iTunes first.
Than open Garage Band and click on bottom Right button (View/ Hide media browser).
Click on Audio>iTunes>Music, and choose the song you want to edit. Then Just drag to your board and this will open new track, you will see line running vertically on your screen, this is showing you at what measure your song will start, just move to the beginning of a track (if you drop it too soon, just "pick" it up again and move it). This is very useful when you are trying to merge several track (e.g. for your iMovie, as you have only two tracks on it).
Than Split and delete portion you don't want any more.
To Slit a track, adjust your measure where you want to split it and go to Edit>Spit.
Hope this helps.

Help with editing buttons in flash

I have dreamweaver 8 and flash 8 and i need to add content to
the nav bar that was made in flash 8....when i do edit and export
back to dreamweaver it doesn't acknowledge the change even when i
refresh....or close the program and manually take out the
files....what am i doing wrong???
undesirable#1

I'm totally confused - i think it is your terminology - when
you say things like "window" - it is
very hard to tell what you mean. "Window" can refer to so
many different things. Then you say things
that popup at first glance can't be seen - even more
confusing. When you say "when I open the window
more..." what "window" are we talking about? Are you
previewing in a browser? Or is this inside the
DW IDE? Or the Flash IDE?
It's probably a very simple solution but I can't figure out
what you are physically looking at, what
it looks like now, and what it should look like based on your
workflow.
sorry - trying to help.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
howtocheatinflash.com
undesirablenumberone wrote:
> just to stating the obvious, ....i'm a total novice.
>
> i'm using the same file from dreamweaver, just renaming
it....then i change
> the placeholder to correspond with the new file...then i
save it and
> refresh....I notice that when i preview it in flash that
as a flash item, when
> the window with the nav bar in it pops up at first
glance you don't see it, but
> if i open the window more then the text is there ...but
still doesn't show up
> in dreamweaver.......
>

Need help with editing drum sound

Hi, I'm trying to edit drum sound(got it from Standard Kit) that I input with my MIDI but I have no idea how to make the drum sound higher.( Is it possible anyway? Please help!
Message was edited by: fm198tx

Hi @Joidivini ,
Thank you for visiting the HP Support Forums. I needed to edit your post and remove the Serial Number. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Help with Editable Regions

Similar Messages

Maybe you are looking for