Help with initial RAID config

Hello there,
I am setting up a law office to move from PCs to Macs. About 12 client workstations in two offices. There is a WAN VPN tunnel between the offices.
I have two questions. The first concerns the setup of the headless Mac Pro Server, which came with 4 one TB drives. My initial instinct was to make a single RAID 5 set out of these drives with a 200 GB volume for system, 1 TB for user and service data and ~500 GB for time machine. I realize I will have to install a monitor to run the RAID utility to accomplish this. Any advise/wisdom would be greatly appreciated.
My second question concerns the remote office. The office has about 50 Gig of current files for user work and I would like to implement full folder replication of this shared data between the two offices. I've looked into CCC/Bombich and he does not reccomend CCC for replication. Any ideas in that area?
Sincerely,
Barn

Thank you for the response MAk.
I very much appreciate your description of TM. It confirms some of the worries I had about it. This is my first server deployment, outside of a lab. I was thinking the users could backup the clients using TM, and that the suitcases could be managed and eventually moved to off-line media--perhaps I am mistaken.
I intend to use CCC for the server itself, and manage and test those backups regularly. I have some familiarity with command-line UNIX stuff from previous lifetimes, and am willing to give rsync a try for folder replication. The office has a lot of data spread out in a fairly flat fashion so I wanted to do folder replication for performance reasons--for sharing documents between two offices--backup would be handled seperately. The remote office will have a 1 TB mini OSX server for this purpose and for a directory replica.
Update: The setup went fine (with borrowed monitor). 2.61 TB RAID 5 set! I have a few test accounts logging in on directory, and am managing to keep acocunt names from matching (the local vs. directory account thing). I have some more testing to do but so far directory users, with a network home at //srvr/volumes/usr/Users works great, at least if I wait five minutes or so after hitting "Create Home Now".
Add-on question: Is there a way to have network home folders sync with local/client home folders for performance reasons? MS does this with mapped folders and off-line synchronization. I may want to do this for some users that travel, and I will definitely need to do this for check-out MacBooks. This is something I have not seen covered in the Server Essentials nor in Support Essentials, or perhaps I skipped over it.
Barn

Similar Messages

Course for help with X Raid

Hi All,
My boss has given my the OK to go on courses for get up to scratch with X Serve so I'm going to go on the Mac OS X Server Essentials 10.5 4 day course but I also want to know X Raid setup. Is there anything else that go on to help with this?

Hi
If you are thinking the course covers the XServe then you might be mistaken. OSX Server is not the XServe, its any apple hardware that meets OSX Server's minimum requirements. It may well be mentioned on the course?
The XServe is dedicated hardware built for Server use although you can install OSX Client on it if you wish. To that end and as far as I know there are no specific courses for hardware other than Apple Certified Technician. This used to be ACPT and ACDT before apple unified the hardware courses under one umbrella.
As for the XServe RAID - apart from the fact that it is a discontinued product and has been for the last 2-3 months - I don't think there has ever been a specific course for it? Leastways not this side of the pond. There are plenty of manuals/user guides available for both products either on the Apple website or on the disks that come with both models.
http://www.apple.com/support/manuals/xserve/
http://www.apple.com/support/manuals/macosxserver/
Tony

Help please - failed RAID config

Hi,
I have a large problem with my external drives.
I had 2 existing Lacie firewire drives mirrored with all photos and music on it and just added two new drives (which I was going to setup as a backup pair).
Unfortunately one of the drives on the existing RAID config had a logical fail (I have a screen print). However the logical drive was still mounted and data was accessible. Before I issued a rebuild I was investigating a possible naming issue and now both disks are showing a failed status. This may have been caused by powering off drives before an unmount.
Anyway, I am sure the data is still on both drives. How can I recover the data from either disk.

OUCH!
First try Disk Utility to just Check the RAID Volume... see what it says.
If it looks like a no-go, then perhaps...
http://www.filebuzz.com/fileinfo/35240/BoomerangData_Recovery_MACOSX.html
I have these but don't know if it/they recovers/fixes RAIDs...
http://prosoftengineering.com/products/datarescueinfo.php?PHPSESSID=d207fcba7a15546aa65eed496d564fc5
http://prosoftengineering.com/products/drivegeniusinfo.php?PHPSESSID=d207fcba7a15546aa65eed496d564fc5

Newbie Help with Restoring SPA504G config file

I know just enough to be dangerous, but not enough to be completely effective. Any help is much appreciated.
I have a standalone SPA504G for which I have customized the configuration. Frequently, several times a day, the phone resets and returns to the default configuration, erasing all my efforts. As a result, I have two intertwined problems:
1 -- is there a way to prevent the resets? I am tethered to RingCentral for my VOIP service, if that is relevant.
2 -- if I cannot prevent the resets, how do I restore my configuration? I have reviewed this helpful post and have downloaded the spacfg.xml file. I have also installed Solarwinds TFTP Server for use in restoring the config file. My problem is that I am completely unfamiliar with TFTP and have been unable to locate instructions as to how to upload, download and restore the spacfg.xml file. Step-by-step "TFTP for Dummies" instructions would be greatly appreciated.
Thanks for your help.
Merk

item 1,
is your phone provisioned? if Ring Central is provisioning it, they may be overwriting your changes.
you can check by going into the provisioning tab on the phone web gui.
click admin login --> advanced --> voice -->provisioning
look for profile rule. if it has anything but SPA$psn.cfg it is probably provisioned. (especially if it says something like http://provisioning.ringcentral.com )
the profile rule will download a new config file from the server every "resynch periodic" time (3600 sec by default), then if it is different from the current config it will implement and reboot.
So to prevent this, remove the profile rule or set resynch periodic to 0.
or have ringcentral put your changes into the provisioning file.
Most providers have a web 'dashboard' to make changes to the phones they manage.
2 - to reload a config using tftp
set up your tftp, put the file in the tftp root, and set the windows firewall to allow incoming connections to the app (solarwinds, tftpd32, etc), or port 69 UDP
then in the gui of the phone use the resync url to load the config to the phone.
http://ip.of.phone/admin/resync?tftp:////
Note, if your config is in the tftproot, you should not need the / part.
hope it helps,
dlm...

Help with software RAID on system disk

I've been trying to get my OS system disk mirrored using diskutil's software RAID (my server has 2 internal 80GB drives). I did what homework I could and here's where I'm stuck. I'm running 10.4.3.
n506:~ root# uname -a
Darwin n506.local 8.3.0 Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC Power Macintosh powerpc
n506:~ root#
According to my research, I needed to boot from an OS disk other than the one I want to mirror, so I installed a second instance of OS X on my second drive, booted on that and ran diskutil enableRAID against the system drive I want to protect. This appeared to work. A new disk device was added (the RAID device) with its only component being the disk I ran enable RAID on. Then I booted from that disk. Here's the problem.
When I run diskutil addToRAID to add the second disk to the raid group, the command does partition the disk the same way the primary is partitioned (according to diskutil list), but the command always fails with this error:
n506:~ root# diskutil addToRAID member disk0 disk2
2006-05-27 23:49:50.012 DiskManagementTool[362] AppleRAIDUpdateSet failed to modify the set (null)
There was an error adding the disk to the RAID (-9960)
n506:~ root#
The system log shows this:
n506:~ root# tail -1 /var/log/system.log
May 27 23:49:50 n506 kernel[0]: AppleRAIDMember::readRAIDHeader: failed, no header signature present on disk0s4.
n506:~ root#
[NOTE: I should add here that, for reasons unknown to me, my system created /dev/disk0 from the drive in the second bay, and /dev/disk1 from the drive in the first bay (the primary disk I'm trying to mirror). I have no idea why OS X set up the devices like that, but I haven't really worried about it]
I've done what research I could and have found no information on this problem. I've tried zero-ing the second disk and rerunning the command (along with rebooting), but I always seem to get this error.
Any help would be greatly appreciated. I've been at it for days now and I'm really frustrated.
G5 server Mac OS X (10.4.3)

If anyone out there is interested in this thread, I upgraded to 10.4.6 and tada:
n506:~ root# diskutil addToRAID member disk0 disk2
The disk has been added to the RAID
n506:~ root# diskutil checkRAID
RAID SETS
Name: Disk1
Unique ID: 1CC5982A-B353-438C-A69F-8D66924449C0
Type: Mirror
Status: Degraded
Device Node: disk2
Apple RAID Version: 2
# Device Node UUID Status
1 disk0s3 219611E9-F35F-48A4-BD4F-F56038094613 2% (Rebuilding)
0 disk1s3 0EDD559B-FEE8-4F73-B94D-AF5590AD8BF2 Online
n506:~ root#

Help with non-RAID HDD setup for 975X

I have built lots of computers of the years, but I have very limited experience with SATA. I am not wanting to use RAID, but I plan on having 2 computers hooked up to 2 of the 4 Intel ICH7 SATA connections and then on the ICH7 PATA controller I plan on having 1 HDD and 1 DVD+R. I plan on going in to the BIOS and setting SATA mode to AHCI (or should it be IDE?) and then "On chip Serial ATA" to Enhanced so that I get the use of all four SATA and the single PATA. Then I plan on disabling the Onboard JMB361. If I do this, will I need to install any drivers to get the system to see the HDD or DVD+R? When I boot up with a Norton Ghost floppy, will I need drivers on their to see the SATA and/or PATA drives?
If I ever decide to use the JMB361, I know there is a driver, but it seems that all instructions are to install it as you are installing windows (hitting F6). How do you install it if your system is already up and running? Is required for it to work properly, or is this just so that it can be seen when booting from CD-ROM or floppy? The manual that came with this board isn't very clear. It claims that the JMB361 can only have a master hooked up to the PATA connector, but all of the specifications I have seen elsewhere on the MSI website says that this board is capable of 4 total PATA devices (Master & Slave for the ICH7 and Master & Slave for the JMB361). Thanks.

Quote
Iam not wanting to use RAID, but I plan on having 2 computers hooked up to 2 of the 4 Intel ICH7 SATA connections and then on the ICH7 PATA controller I plan on having 1 HDD and 1 DVD+R. I plan on going in to the BIOS and setting SATA mode to AHCI (or should it be IDE?) and then "On chip Serial ATA" to Enhanced so that I get the use of all four SATA and the single PATA.
That should not be a problem. Set SATA mode to AHCI and enable "Force Gen.II" to enable full speed for your S-ATA drives. These settings do not affect the P-ATA drive that is connected to the ICH7-IDE-Port. In order to install Windows XP SP2 properly on one of your AHCI-enabled-SATA hard drives you need to point Windows to a disk that contains the ICH7-AHCI-SATA driver (F6). No additional drives will be needed to use the P-ATA drive that is connected to the ICH7-IDE-Port.
AHCI mode is necessary in order to support performance features like NCQ.
Quote
Then I plan on disabling the Onboard JMB361. If I do this, will I need to install any drivers to get the system to see the HDD or DVD+R? When I boot up with a Norton Ghost floppy, will I need drivers on their to see the SATA and/or PATA drives?
You can savely disable JMB361 as long as there are no drives connected to the IDE-Port or the S-ATA-Port that belongs to JMicron-Chipset. JMicron drivers are only necessary, when JMB361 is enabled and drives are connected.
Quote
When I boot up with a Norton Ghost floppy, will I need drivers on their to see the SATA and/or PATA drives?
I am not sure how Norton Ghost Floppy works, because I never used it. If it boots into some kind of DOS-Mode or any OS-mode prior to Windows XP/2000 you might have a problem seeing the S-ATA drives if they run in AHCI-mode because there are no DOS-based ICH7-AHCI-drivers.
Quote
If I ever decide to use the JMB361, I know there is a driver, but it seems that all instructions are to install it as you are installing windows (hitting F6). How do you install it if your system is already up and running? Is required for it to work properly, or is this just so that it can be seen when booting from CD-ROM or floppy? The manual that came with this board isn't very clear. It claims that the JMB361 can only have a master hooked up to the PATA connector, but all of the specifications I have seen elsewhere on the MSI website says that this board is capable of 4 total PATA devices (Master & Slave for the ICH7 and Master & Slave for the JMB361). Thanks.
You should be able to install the JMB361-driver after Windows-Installation. It is required to assure the proper function of all drives connected to the JMicron-Chipset.
The IDE-controller (IDE2) that belongs to JMicron chipsets only supports one Master Drive. Only 3 IDE-drives can be hooked up to the mainboard simultanously.

Help with starting raid on the k9a2 platnium

ok well i just got a k9a2 platnium
specs- amd 9950 BE edition
4gb of 800mhz ddr2 cas 3
2x 80 gb hard drives
1x 640gb hard drive
ati hd 4870
k9a2 platnium
750 watt corsair psu
ok. i finished my computer. and i wanted to raid the two 80's. but for some reason it would never show up as a single drive when i install windows vista ultimate 64bit.
so i installed my vista on the 640gb hd.
how do i raid 0 my two 80 gb.
What i did now-
plugged in the two sata(the 80 gb's) into the red slots.
installed the raid driver for windows vista
booted computer. and press CTRL+F
pressed 2. and put my two 80's in raid 0 mode. i dunno what to put for the other options such as striping and stuff.
thats all i did for now.
can someone help me

I don't understand where you're at or what you're trying to acheive here ???
You've formatted the 640gb disk, so now where is your OS?
There was absolutely no need to do that, what myself and BOSSKILLER are trying to get you to do is to create a partition on your RAID array, so WIndows can use it, this is done by clicking on 'Drive Management' in your Computer Management screen. (right-click My Computer and select Manage)
The RAID array will appear as one 'disk' in the disk list (lower right window), but will be empty, just right-click inside it, and select Create Partition, and then format it.
[My screenshot below is from my computer, but I only have one hard disk, and no array, but your array will be shown in the lower right hand panel, will show as 160gb (2x 80gb)]
If you still cannot get the grasp of this, I suggest you get someone who knows how to do this to help you.

Help with initial setup for AirPort Express

Now, before we decided to go wireless, our internet was configured like this: cable cord to router, ethernet cable connecting the router to CPU. This worked fine and our internet has never really had any sort of problems. However, we have had problems with our new AirPort Express. I've tried taking the ethernet cable that's connecting our router to our CPU, and using it to connect the router to the AirPort Express.
However, I keep getting the flashing amber light. When I go into the diagnostics, it says that it cannot pick up an internet connection, even though I'm able to get internet when I plug in directly. If I try to ignore this and set up the account anyway, I can get my computer to connect to the AirPort Express, but I can't get the AirPort Express to connect to the internet.
Please help!

pen22, Welcome to the discussion area!
Did you configure the AirPort Express (AX) to use the same settings as your CPU to connect to the internet?

Help with initializing/sending a contact form

Hi guys.
Basically, I created a standard HTML webpage(s) in Dreamweaver (this form is on a HTML file, not a PHP file). I have a form in there (at the footer of all my webpages), and it looks like this:
<div id="form">
            <form action="PHP/contact-send.php" id="contactForm" name="Form1" method="post" >
                <fieldset>
                    <p>
                         <label for="name">Name</label>
                        <input id="name" type="text" value="Under construction" name="Name"/>
                    </p>
                    <p>
                        <label for="email">Email</label>
                        <input id="email" type="text" value="Under construction" name="Email"/>
                    </p>
                    <div class="cl"></div>
                    <p>
                        <label for="message">Message</label>
                        <textarea id="message" cols="10" rows="10" name="message" ></textarea>
                    </p>
                    <p><input class="sumbit_button" type="submit" name="submit" value="" id="submit" /></p>
                </fieldset>
            </form>
          </div>
I have styled this form, and added Jquery validation to it which works fine.
All I want to do isinitialize this form to send e-mail (I uploaded my website, and the form does not work)... I have specified the path to the PHP (PHP/contact-send.php) in the form (and yes, I put the PHP file in my website's directory... lol), and yet the form does not work. Very frustrating... Especially after I have tried a lot of different PHP codes, and none of them work.. Can someone please help me with a simple PHP code that I can paste into my "contact-send.php" file and link to the form in the "index.html" file? Also, if possible
a popup message that shows when the form is successfully sent (not on a new page, just a simple Javascript alert).
I am using 000webhost, and a free domain (.co.cc).
Also, I would like to have a search bar on my website... that, too has been styled, I just want to know how I can code it to have it function and display results.
Thankyou for your help guys.

I suppose this means I can have the form working on a HTML file and simply link it to the file containing the PHP code in the "form action"?
In other words, I don't need to have my form design on a PHP file for it to work?
Correct.
<form action="path/form-processing-script.php"
Also, I'd rather not have the user be redirected to a new page when the form is sent. Can I simply use an alert popup message? (i.e. "your message has been sent, click OK to contine)
Most scripts provide variables for either redirecting to a success.html page or displaying error & success messages in the script.
I don't favor client-side "alert boxes" because they won't display if JavaScript is disabled in browsers.
Also like I said before, I have already styled the form, and added validation... Do any of those links allow for me to simply use the PHP code (editing the necessary fields like "name" and "email") without having to use their validation as well?
Yes, you could use your current form providing all field names exactly match those in the script.
As above, client-side validation only works if JavaScript is enabled in browsers.
PHP (server-side) validation is much more reliable.
Related links from an earlier discussion:
PHP Code (note the variables):
http://forums.adobe.com/message/3970070#3970070
HTML Form: (note the form field names)
http://forums.adobe.com/message/3970073#3970073
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Help with Degraded RAID?

I have a RAID array established (mirrored aka RAID 1 across two external Firewire drives, and it's not being used as my system volume.) The array has been in place for quite some time, and I've recovered from several failures previously (note to self: don't buy any more firewire drives that don't come back on after a power failure.)
I've just recovered from another failure, where the RAID set refused to recognize the existing drive as previously belonging to the set. I re-added the drive to the array and the drive was successfully rebuilt.
So far, so good. So what's the problem? The array is listed as "degraded." I tried following the advice listed here:
http://docs.info.apple.com/article.html?artnum=106987
Executing the command "diskutil checkRAID" reveals the results at the end of this message. What can I do about the duplicate node 2? All of the diskutil commands require the Device Node as a parameter, and they don't recognize "2" or "Unknown" as a valid value.
Help would be much appreciated ...
RAID SETS
Name: Backup
Unique ID: 59256911-7EF5-4FA4-B355-776D8187E8C7
Type: Mirror
Status: Degraded
Device Node: disk2
Apple RAID Version: 2
# Device Node UUID Status
1 disk1s10 536A7B2E-5F78-420E-AD36-98E4F21E01A5 Online
2 disk3s3 3E52C861-2ABF-4446-BAC6-C09DE2E95D86 Online
2 Unknown Missing/Damaged
----------------------------------------------------------------------

Well, I still don't know what happened originally. Perhaps I recovered the array pre-10.4 and some state was unhappy when I upgraded to Tiger? I'd still like to know the cause, but here's what I did to cure it ...
I backed the whole array up using Disk Utility. Just to be safe.
I used "diskutil destroyRAID" for which the documentation is nothing short of terrifying. I pretty much expected all the volumes to be wiped and to have to restore the whole thing. I was pleasantly surprised to find that the two volumes in the mirror were simply disconnected and both were intact duplicates of one another.
I unmounted one of the two copies, used "diskutil enableRAID mirror" to turn the other one into a single-set RAID and used Disk Utility to add the unmounted disk back into the array and started the rebuild.
All appears to be well again. This was under 10.4.6 so your mileage may vary. When in doubt, back EVERYTHING up first.

Need Help with Internal RAID

I'm working with 1080i HD footage (captured from a Canon HV30) and output through an Intensity Pro PCIe card to a 1080p display while working on Final Cut Studio 2. I have two separate monitors outputing 1920 x 1080.
I'm working on a 2.8GHZ Quad-Core Intel Xeo Mac Pro with 10GB of RAM and a 320GB Hard Drive. Quicktime stumbles over 1080 footage from FCP, skipping frames, so I need to stripe some drives, internally if possible (there's three slots available for drives).
I already own an additional 1.5TB SATA hard drive, and am wondering...
What size drives would be ideal to handle 1080 footage? Would 500GB drives be enough, 1TB, or 1.5TB? Should the drives all be the same size?
Do I need a PCIe card to stripe these drives together or is the OSX Disk Utility sufficient?
Will I need to stripe three drives, or is two sufficient? Should I stripe together the main drive too or stripe the drives separate from the main hard drive?
Help on any one of these questions would be appreciated. Thanks for reading.

Ok, now that you have freed up some space on your system HD, the next thing would be to do a little system maintenance.
First, shut down your Mac and restart it. Don't just log out. Shut it down. Power it off. Then restart. In System Preferences, turn off Time Machine if you have it running. Also put your system HD in the Spotlight privacy list (aka System Preferences > Spotlight > Privacy > Prevent Spotlight from Searching These Locations.)
Then, if you don't already have one, download a utility like Cocktail, Onyx, MacJanitor, etc. and run it. (You have Leopard, so make sure you download the appropriate version of the utility.) Make sure there are NO other applications running when you run the utility. When you run it, accept all the default operations and also check the option to clear the system cache; you want to clear the system cache. Also set it to shut down your Mac after running. (If there is no such option, you should manually shut down your Mac after the utility runs - and I mean shut down, not just log off.) The first time you restart after running the utility & clearing the system cache, your Mac will take longer than normal to boot; don't worry, that only happens the first time, as your system will be rebuilding the system cache.
Next, you should probably delete any render files that currently exist and re-render your video.
Then try exporting your video again, and see what happens.

Need help with my RAID Utility

I got my battery replaced about two weeks ago and now I am getting this in my RAID Utility. Any ideas? I really don't want to have to carry this massive thing back to the apple store!!

That problem is probably not related to the battery.
It appears one of your drives suffered an error or was not responsive enough, and was declared unsuitable to continue. The RAID was changed to Degraded, and must now be rebuilt from the good drive(s) remaining.
This can occur when a drive is flat-out dead, but it also occurs when a non-trivial data error occurs, that requires more than a few retries (which takes too long and the RAID Driver gets impatient and degrades the RAID).
You can try erasing the errant drive, and re-adding it and allowing the RAID to rebuild (often all all-day process). Since new data will be supplied, any latent errors will be over-written and "fixed up".
If this happens again, do not continue to fiddle with it. The drive should be replaced -- although that drive may be re-purposed for lighter-duty work such as Backups after being Zeroed.
EDIT:
In a production environment where lots of drives were on hand, this would be counted as a failure and the drive would be replaced. The failed drive would be completely wriiten with Zeroes, and if it passed, would be re-purposed for use somewhere else.
Google did an enormous research study on their server farms, and concluded many drives that encountered errors would end up testing bad and being replaced within 6 months (of continuous use).

HT2559 Help with setting raid block size after the fact

I screwed up and created my raid 1 with block size set at 32. I need 256....it won't let me change it? What do I do? Do I delete and re-configure it?

thanks for the reply. I am editing huge photo files (HDR Pano's) off the drive. Doesn't that mean I need 256? Anyway, when I go to erase it, it says "Deleting a mirrored RAID set changes each of its slices into a partition that contains a complete copy of the data from the deleted RAID set". Is that a problem?

Help with initial download....do I have right version?

My initial download/import to populate Photoshop Elements 13 stopped working (responding) at about 80%...If i re-download, will it duplicate the first 80%?
Also, when entering the forum it asked which product I had questions about...I would like to know the difference between Photoshop, Photoshop Lightroom & Photoshop Elements...
I was looking to purchase a fully functioning 'photo/picture' program for my new Toshiba (previously a Mac user) and know nothing! Did I get the right one? Is this a stand alone program? I have a MASSIVE photo endeavor and want to be set up in the best way before I begin organizing 50 years of pix!
Thank you!!!!
Meredith
Lafayette CO

Meredith wrote:
My initial download/import to populate Photoshop Elements 13 stopped working (responding) at about 80%...If i re-download, will it duplicate the first 80%?
Where did you download from? Was it installed or just downloaded? Did you purchase it or are you using the trial?
I would like to know the difference between Photoshop, Photoshop Lightroom & Photoshop Elements...
See here:
FAQ: Why is Photoshop Elements cheaper? What's different about Photoshop?
I was looking to purchase a fully functioning 'photo/picture' program for my new Toshiba (previously a Mac user) and know nothing! Did I get the right one? Is this a stand alone program? I have a MASSIVE photo endeavor and want to be set up in the best way before I begin organizing 50 years of pix!
Photoshop Elements will work for you.

Help with Role Attribute config in ERM in SAP GRC AC 5.3

Hello,
I have a doubt.
We are configuring the Role Attributes of the ERM in SAP GRC AC 5.3.
Where can I get the Business Process & sub-process of a SAP ECC 5.0, in witch Tcode?
An in the part of u201CProject/Releaseu201D where can I get this element from SAP ECC 5.0?
Thank you in advance.
Best regards.
Pablo Mortera.

Pablo,
You won't be able to get BP, SBP and Project/Release information from any Tcode. Whenever security admin creates a role, they assign the role to a Business process, functional area etc. This information comes from Business.
Project/Release field is used to identify the project name for which this role is being created/maintained.
These are role attributes which help in role documenation so business needs to decide about the association.
Regards,
Alpesh

Help with initial RAID config

Similar Messages

Maybe you are looking for