Hiding a Field, row and cell

Please how can I hide a Field, Row and cells repectively. We are carring out a project that we need to hide cells and sometimes fields or rows as the case may be. I noticed in console -> Role -> Tables, you can set only read only or read/write and in the functions tab you can set up none or execute. There is no option for hiding. Can any one help.

Hi marcellinus,
To hide a field there are two methods:-
1-->Open console and right-click on field of corresponding table which u want to hide and choose Hide from the context menu. This will hide field from display.
For more details u can refer to SP04 console reference guide-page no 53.
2-->U can specify constraints and privileges in the tables and fields tab in roles table for field and record level security.This will prevent field or records from display.
To hide a rows or cells u can specify any mask as constraint.This will display only those records which are specified in the mask.
For more details u can refer to SP04 console reference guide -page no 149.
Hope this will help you.Let me know the result
Thanks,

Shiv Prashant Dixit

Similar Messages

Hide row and cell by cell formatting

Hello,
I am new to both diadem and VBS and I am having difficulties in translating calculations between excel and diadem. I know that diadem doesn't have the same cell by cell formatting that excel does but is there a way to either hide rows that do not meet a certain condition or a way to say use an equation of the form
=IF(H5> 0,J5+M4,0), where H is the conditional column and M is the resultant column?
Thank you

Hello ccimac,
You might want to look at the IIF function to help you solve that particular problem,
Example:
Call Calculate("Ch(""ResultNV"")=IIf( Ch(""Channel1"")>1,Ch(""Channel1""),NoValue)" )
This will create a NEW data channel called ResultNV that checks (in this example) whether a channel called Channel1 is larger than 1 or not. If it is, the value will the the actual channel value, if the values are smaller than 1 the software will replace the values with a NoValue - which is DIAdem's way of saying that a "cell" contains invalid values.
Does that work for your question? Feel free to ask if you have further questions,
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Editable fields (Rows and columns) using CL_SALV_HIERSEQ_TABLE

Hi,
I have to create an Hierarchical ALV with 2 Level using CL_SALV_HIERSEQ_TABLE.
The problem is; i need check boxes as well as editable fields in column. I need checkboxes at item lines (which i am able to).
Can anyone guide me how to make fields editable in CL_SALV_HIERSEQ_TABLE ?
Thanks in advance.
Regards,
Hemant

Editable fields(other than the checkboxes) are not supported using the ALV Object model(SALV classes).
Regards,
Rich Heilman

Can I store a value into a given row and channel?

Hi all-
My question is basic, but I can't seem to find the answer in any of the forums or help windows.
Is there a way to store a variable into a particular row and cell number?For example, if i have a channel named [1]/ChannelB and the following:
Dim A
A= 12
I want to store the value of 12 into row 7 of [1]/ChannelB... Is there a method for doing this?

Hello,
You can access individual cells in DIAdem with the ChDX variable.
For instance, to store the value of A in row 7 of [1]/ChannelB you'd do this:
Dim A
A = 12
chnval(7,"/ChannelB") = A
Hope this helps,
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Hiding buttons when printing and adjusting field to compensate

Hi,
I had a request for a form in which the Add a Row button and Delete Row button are hidden when printed to make it look a little nicer. I was able to hide the buttons when printing, but the table that the delete is part of still looks odd and there is a larger space than I'd like to have between the tables once the add a row doesn't show. Is there are a way to make things look nicer? I've attached the demo of the form I'm working on a sample of what it looks like right now when I print.
I did see a post about Hiding text field borders when printing and it sounded like I might need to do something similar, but I'm not quite sure what.
Thanks!
Image: https://acrobat.com/#d=HvU8V27oA*Ki6HzoI2Ec0w
Form: https://acrobat.com/#d=1K*EfksEnAH0azzxTrx31w

The easiest way to deal with the buttons down the side is to set the borders of those cells to none, then you don't have to worry about it - you will end up with a little extra space down the right side but the table will look finished when the buttons hide. This is how I do it, because the button takes the whole space of the cell I just don't put a border on it. Getting into hiding columns and shifting table size to fill the space is getting pretty tricky.
To get the tables closer together when you print and hide the add row button, put the following script in the prePrint event of the button:
this.presence = "hidden";
And this script in the postPrint event:
this.presence = "visible";
Because the button is part of the flowed subform the table is in when you set its presence to hidden the subform will close the gap.

Hiding Rows/Col/Cells?

Post Author: Ming
CA Forum: Desktop Intelligence Reporting
Is there a way to hide rows/cols/cells in BO? I want to summarize the data in my report, but I want to hide all the source data without affecting my summary.
I basically have a dump of records and I want to summarize the sum value of various fields, but I just want one line record. Break sort of does what I want, but it leaves rows for all the entries. I just want 1 entry with summed values visible. Ideas? thanks

Post Author: tpham
CA Forum: Desktop Intelligence Reporting
i have this same exact issue with hiding rows. It is possible to hide columns by going into the table properties but i cannot figure out how to hide rows. (the meat of the data)
anyone?

How to make a particular row and column field editable in ALV

Hi Experts,
I have a requirement to make a particular row and column field editable in ALV output. Like i need to make 2nd row - 4th column editable of ALV output.
Kindly help me out to solve this.
Any help would be appreciated.
Thanks,
Ashutosh

Hi Ashutosh,
please check below, explained by some experts.
In the below link editing two columns MOD_RANK and TECH_RANK.
These two columns will be in edit mode once after selecting the required record
Editing single cell in a row of ALV table
And also look for more info
http://scn.sap.com/thread/884976

How to preserve a row and column in numbers automatically.ie the cells are not consecutivecell a1 a3 etc

working on a league table
when sorting the league table ,I need to preserve the row and column
I can preserve row and column by using the drop down menu on every cell,but would like to do it automatically(2 clicks to every cell)
working in numbers
yosemite 10.2

This technique would be quite slow. Unfortunately, it's the only way I could think of if it's really an Excel file. If it's tab delimited file, you could read a whole thing into 2D array and work on Array instead of reading cell-by-cell.

To find the date type fields in the row and validate those date fields

TYPES : BEGIN OF TY_MARA,
          MATNR TYPE MARA-MATNR,
          ERSDA TYPE MARA-ERSDA,
          ERNAM TYPE MARA-ERNAM,
          LAEDA TYPE MARA-LAEDA,
          MTART TYPE MARA-MTART,
        END OF TY_MARA.
DATA : it_mara TYPE STANDARD TABLE OF ty_mara,
      it_mara1 TYPE STANDARD TABLE OF ty_mara,
       wa_mara TYPE ty_mara.
loop at it_mara into wa_mara.
describe field wa_mara-ersda type c_data.
if c_data eq 'D'.
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
    EXPORTING
      date                            = wa_mara-ersda
   EXCEPTIONS
     PLAUSIBILITY_CHECK_FAILED       = 1
     OTHERS                          = 2
IF sy-subrc eq 0.
wa_mara-ersda = '00000000'.
    append wa_mara to it_mara1.
    write :wa_mara-matnr,wa_mara-ersda.
    else.
        wa_mara-ersda = '00000000'.
    append wa_mara to it_mara1.
    write :wa_mara-matnr,wa_mara-ersda.
ENDIF.
endif.
endloop.
This issue regarding how to find the date type fields in the row and validate those date fields.If its not a valid date ,i have to assign initial value to that.
I've tried that for single field using describe field.Please help me do that for all fields.

Hi Sam,
I believe we had discussed the same issue in the below thread. Can you please refer the below one?
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d93e16ff-c123-4b36-b60b-60ccd34f6ca7/calculate-time-differences-in-infopath?forum=sharepointcustomizationprevious
If it's not helping you please let us know
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

How can I select rows of cells and merge them vertically into one cell in each column?

I'm working in CS4 and need to be able to select 2 to 6 rows of cells (with many columns) in a table and then merge the selected cells vertically into one cell in each column. A few cells in the chart will not need to merge so I must select the ones that do. I have almost 100 pages of charts with cells that need merged this way by Tuesday. Please help!
Top chart example needs to change to the bottom example.
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
100
600
300
600
20000
120000
2000
500
400
50000
10000
5000
3000
200
700
67
122
600
900
100
2
7
123
1110
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
100
500
200
100
600
400
700
900
300
5000
30000
2
600
10000
67
7
20000
2000
122
123
120000
5000
600
1110

SmartCellMerge may help you:
http://www.indiscripts.com/post/2012/04/improve-the-way-you-merge-cells-in-indesign
@+
Marc

Hiding row and column labels

You can format a table so that it looks just like a form — e.g. give it a background color, shadow, etc. Looks very nice. However, whenever you click on a cell, the row and column the row and column labels suddenly appear, and the visual illusion of a form is lost. Is there any way to prevent the row and column labels from appearing short of locking the table which also mades it uneditable? If not, I think this would be a useful feature.

swehba wrote:
You can format a table so that it looks just like a form — e.g. give it a background color, shadow, etc. Looks very nice. However, whenever you click on a cell, the row and column the row and column labels suddenly appear, and the visual illusion of a form is lost. Is there any way to prevent the row and column labels from appearing short of locking the table which also mades it uneditable?
Feature unavailable.
If not, I think this would be a useful feature.
Here you are speaking to end users like you so your thoughts are useless.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'11
Yvan KOENIG (VALLAURIS, France) mardi 12 avril 2011 12:28:32

Best way to change row and/or cell colors other than doing it in sql

So I have some interactive reports and I would like to be able to change the color of the row (and in some cases cell). I have seen threads talking to doing this with the sql statement. But is there a way to do this either when the page is displayed or as a result of some action on the page?

Take a look at this article, towards the middle it shows in interactive reports how to change colors of rows based upon values: http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/apex/r31/apex31nf/apex31irr.htm
Thank you,
Tony Miller
Webster, TX
Never Surrender Dreams!
JMS
If this question is answered, please mark the thread as closed and assign points where earned..

Export data with definided fields terminated and rows terminate as bcp

hi to every one
i am dummy oracle and i need to test some database.
So i need to export some data in txt file and use @@@@@ as fields terminateed and ##### as rows terminated.
In mssql and in sybase there is a bcp command that by the client and cmd command u can estract the dataset like u want,
THERE IS SOMETHING LIKE THIS IN ORACLE
With the jdevelop u can export but not define all the rules.
thank a lot

Basically oracle exports are binairy but you could query the table and spool the output to a textfile with sqlplus.
sqlplys user/pw
spool c:\outputfile.txt
select '######' || col1 || '@@@@@' || col2
from table
spool off
exit

Populate multiple rows and columns based off of a single cell

Does anyone know a way to populate multiple rows and columns based off of the input of a single cell. I'm trying to create a workout tracker that auto populates from a master list of workouts. Example, in A2 the user selects the workout from a drop down menu (St1, St2, St3, etc) and the workout is pulled from the master list and is populated into B2:C5.
I'm using =LOOKUP(A2,Master :: A2:A32,Master :: C2:C32) right now, but it's only drawing the top column. I'm looking for an edit for the formula (or completely new formula) that will place the info from the 1st column of the Master table into the 1st column of the Auto Tracker 1 table and then on down until the 4th column.
Here is a screen shot of what I have now:
And an example of what I'd like to accomplish:
Any and all help is appreciated, and please let me know if there is any more info that I can give that'd help out.

Hi Mike,
Your screenshots show that you have merged some cells in Column A of both tables. That may be the reason why the LOOKUP function is having trouble working out which range of cells to examine.
Hope this helps.
Regards,
Ian.

Hiding a Field, row and cell

Similar Messages

Maybe you are looking for