Hiding columns in view.

Hi all,
I need to hide two columns in a view. I need to save this view and use it in a web template. I can do this if the column is a key figure but not when its a selection in a structure. What are my options? I tried deleting and hiding the columns and then saving it as a view but when I execute the template, the columns come back. Please let me know what I can do.
Thanks!

Hi Uday,
See if you can do this using the filter option: Right click on the Structure in the view and choose filter. Then move the selections that you want to the right, and other to the left.
Hope this helps...

Similar Messages

Event getting trigger after hiding columns in alv report

Hi All,
I having requirement like after hiding columns,i have to control some of the hard coded data in report output. Is there any event to know what all are the columns are selected to hide?

You can use FM REUSE_ALV_LIST_LAYOUT_INFO_GET to read the fieldcat again.
Look at the parameter it_event_exit on the ALV FM to now user has press on some of the Layout buttons.
In the fieldcatalog, look for
- no_out = 'X'. " column is not displayed but can be choosen when changing the layout
-tech = 'X'.
" column is neither displayed nor availabe in the layout

Hiding Columns in a JTable

Hi folks,
I'm developing a program, one part of which should show in a table the information it got from the DB. It works just fine. The problem is - the user doesn't need to see all the columns (some of them are even unknown and are for intern use only). How could I hide those columns? Or should I create another TableModel and show it instead?
Thanks in advance

As a new member you should learn how to search the forum before asking a question.
A simple search would use "hiding column jtable" as the keywords as an example.

How to Use Column Selector View in Reports

Hi all,
Can someone please advise on how to use the column selector view in CROMD's reporting tool?
Whenever I add a Column Selector view, and check the Enable checkbox of a certain column, a message appears "Click the columns in the selection pane to add more choices". However there is no selection pane, and the only thing I can do within the column is input a column label.
Am I missing any crucial steps here?
Thanks.

Hi,
Choose a column as column selector by enabling the check box and click the columns that has to get into column selector in the left navigation.
On click the columns would get in one by one. After that field that you choose would be displayed in the position of the column in the report table
Typically the purpose is something like this. If you want to dynamically change the first field say by Account Type, Account Region, Account Status and see the revenue then it can be used
-- Venky CRMIT

Thumbnails in Column & List views

My Finder (v10.4.5) mostly does NOT show the thumbnails of my JPGs in Column & List views, unless those JPGs were created on my computer (Tiger 10.4.6).
I got it to finally show the thumbnails in Icon view (View > Show View Options > Show Icon Preview + All windows), but I also want to see the little thumbnails in Column and List Views. Anyone know how to do this.
NOTE: those same JPGs that don't get the thumbnails on my MAC, do show thumbnails on my crappy-*** Windows ME Dell's Explorer.
By the way, (different Question) is there a way I can set up to be notified via email when somebody replies to my question here in this discussion area?
Thanks,
Ted
PowerBook G4 Mac OS X (10.4.6) 2 GB DDR SDRAM
PowerBook G4 Mac OS X (10.4.6) 2 GB DDR SDRAM

With a Finder window open in Column view, when you go to the View menu item and select Show View Options there are not any "Show Icons" or "Show preview column" selections for me to check.
That is very very strange. Try opening a Finder window, have it in icon view, and the bring up Show View Options, I presume you are getting the options? Now go to View (don't close the options window!) and change to List. A different set of options should appear in the options window, and if you then change the view to Column what happens to the options window?
If you want to see thumbnails for files that don't have them you either use Column view with a preview column set to display icons, or put the folder in Icon view. The Mac OS Finder does not create thumbnail.db files, as does Windows (I believe many Linux window managers create analogous files). Instead the Finder either reads the thumb from the resource fork of the file (most--maybe all--Mac graphics programs have always had the ability to create custom icons that are a part of the file), or else it will create a thumb "on the fly" for files that don't have them if told to do so in Icon and Column views. In List view it will display a small icon if the file has one, otherwise it just uses the generic icon. Windows is incapable of reading Mac resource forks, where the custom icon is for files created on a Mac, and the Finder is incapable of reading Windows thumbnail.db files. Any file you create on your Mac with a Mac graphics program will have a custom icon, if you set the preference of the program to save the file that way. This includes Image Capture, if you use it to transfer files from your camera. Images you get from a Windows or Linux box, or download from the Internet, do not have a resource fork and so do not have a custom icon.
Francine
Francine
Schwieder

How to hide the Columns and Views for Login user in SharePoint 2013

Hi Friends,
How to hide the Columns and Views for Login user in SharePoint 2013? Is it possible using OOB features? If not possible how can we hide the Columns and Views for Login user?
Could you please help on this.
Thanks,
Tiru
Tiru

Hello Tirupal,
There is no OOB way to do this.
Please check this codeplex solution to achieve the same.
https://sp2013columnpermission.codeplex.com/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Reorder columns in View Responses window

Can the columns in View Responses window be reordered?
If so, can it be done prior to all the responses being received?
How does the program determine the order for the columns? It is different from the tab order on the form.
Thanks

Yes, they can be reordered. Just select the column (where the column letters are) and drag it where you want it to go.
You can reorder the columns anytime you want. The default order is based on the order of the fields in the Design tab.
Randy

DreamweaverCS3 template(two column liquid) views fine in firefox but in IExplorer I don't get the design only code? How do I fix this?

Dreamweaver CS3 template two column liquid views fine in firefox but in Iexplorer I don't get the design only code? How do I fix this?

random guess- what file extension have you saved the file with.
second random guess- there may be an unclosed html comment
third- what do you mean by "I don't get the design only code"
Do you mean the browser shows the code, or the browser shows nothing, or ???
for a better reply, please provide a link to the uploaded page please.

View's height in column goup view

We create one Column group view which contain 3 collapse view. Modify the layout of column group, set all three collapse view's height as 33.33%.
Then view the report in Active Viewer. After report loaded, the 3 collapsed view display very well, however a few minutes later, the height of 3 collapsed view become smaller, for example change from 117 to 81, then vertical scroll bar showed and the data in collapse list did not display as we expected .
Do not know how to workaround this issue

Sorry, but it's not there anymore as Apple has removed it
The only thing you can do is send feedback
http://www.apple.com/feedback/itunesapp.html

Calculated column of a request from Column Selector View.

hi,
A user wants to select the calculated column of a request from Column Selector View.
But he is able to select only those columns which are available in Selection Pane.
How can he fulfill this request

Hi,
Take a column in your request criteria and change the name of the column and forumala to f(x)=qty* amount which is your calculated column and using column selector use this column as your user wish too.
UPDATED POST
I dont know how your proceeding,the solution i gave will definately work .Here are the steps
1)pull a column into the request criteria
2)rename the name of the column
3)go to formula in f(x) change according to your requirement for example:- quantity*unitprice
4) run the report and in results you would see the column.
5)From compound layout select column selector and see what you want is getting displayed.
Hope helps you.Award points.
Cheers,
KK
Edited by: Kranthi on Jan 19, 2011 7:23 AM

Is there any way to find out the dependency information for column of view?

Does Oracle provide some view / table / pl/sql pkgs to find out the dependency information for column of view ?
For example, there are two table mytable1 (col1 varchar2(10), col2 date) & mytable2 (col1 varchar2(10), qty int), and there is one view myView as
select mytable1.col1, col2, qty from mytable1 inner join mytable2 on mytable1.col1 = mytable2.col
Can I get some information such as myView.col1 is come from mytable1.col, myView.col2 is come from mytable1.col2, myView.qty is come from mytable2.qty
?

I can get the information about the columns list in table/view from ALL_TAB_COLUMNS table, but I wish to know the column in the view is come from which original table's column.
Is there any way to find it out from Oracle meta data / through any PL/SQL packages ?

EVDRE reporting not stable: "hiding columns" & applying datarange formula"

Hi,
we use BPC 5.1. (SP6) With several EVDRE reports we experience that our excell session sometimes stops working, typically when changing the CV and expanding again. At the bottom of the excell we see the statements:
"hiding columns" or also "applying datarange formulas".
I wait for more than 10 minutes, but nothing changes and I can't do anything anymore and have to abort excell with CTRL + ALT + DEL ...
Does anyone experience the same problems? (We work with Office 2007)
regards
Dries

Hi,
I cannot test with Office 2003 since I don't have it installed ..., I typically have it with EVDRE reports, not with schedules created from a template. Numbers of members to be expanded, maximum 10, for which 10 accounts are displayed (so max 100 lines) ... We do not have many data in our system yet, lets say 20.000 records max.
D

To drop column of view

hello all
i would like to drop one of column of view.
but i unable to drop.
ashish>alter view magazine drop column author;
alter view magazine drop column author
ERROR at line 1:
ORA-00905: missing keyword
but same process i had done on table which work.
ashish>ed
Wrote file afiedt.buf
1* alter table magazines drop column author
ashish>/
Table altered.
can u please tell me why i m fail to do so??
with regards
ashish

A view is nothing more than a stored query, change the query and you change the view.
SQL> create view vw
2 as
3 select object_name
4       , object_type
5    from all_objects
6   where rownum < 10
7 /
View created.
SQL> select *
2    from vw
3 /
OBJECT_NAME                    OBJECT_TYPE
/1005bd30_LnkdConstant         JAVA CLASS
/10076b23_OraCustomDatumClosur JAVA CLASS
/10297c91_SAXAttrList          JAVA CLASS
/103a2e73_DefaultEditorKitEndP JAVA CLASS
/1048734f_DefaultFolder        JAVA CLASS
/10501902_BasicFileChooserUINe JAVA CLASS
/105072e7_HttpSessionBindingEv JAVA CLASS
/106ba0a5_ArrayEnumeration     JAVA CLASS
/106faabc_BasicTreeUIKeyHandle JAVA CLASS
9 rows selected.
SQL> create or replace view vw
2 as
3 select object_name
4    from all_objects
5   where rownum < 10
6 /
View created.
SQL> select *
2    from vw
3 /
OBJECT_NAME
/1005bd30_LnkdConstant
/10076b23_OraCustomDatumClosur
/10297c91_SAXAttrList
/103a2e73_DefaultEditorKitEndP
/1048734f_DefaultFolder
/10501902_BasicFileChooserUINe
/105072e7_HttpSessionBindingEv
/106ba0a5_ArrayEnumeration
/106faabc_BasicTreeUIKeyHandle
9 rows selected.
SQL>You beat me to it, Rob. And you're absolutely right about the triggers!
Message was edited by:
Alex Nuijten

3 column vertical view

So i am switching over from Outlook '03 to Mail 2.0. In outlook I could have a three column vertical view of my mail. this would be great on MacBook with its widescreen. It maximizes the number of emails listed by spanning from the top to bottom of the screen and lets one read more on an email with out scrolling.

> rjkg.com/GS.html), but the center and right columns are
being pushed
> down in
> IE. Here's the css (navbar is left, headlines is right,
and content is
> center):
>
> #navBar{
> float: left;
> width: 20%;
> margin: 0px;
> padding: 0px;
> background-color: #ffddbb;
> border-right: 1px solid #cccccc;
> border-bottom: 1px solid #cccccc;
> }
>
> #headlines{
> float:right;
> width: 20%;
> border-left: 1px solid #cccccc;
> border-bottom: 1px solid #cccccc;
> padding-right: 10px;
> background-color: #ffddbb;
> background: #ffddbb;
> }
>
> #content{
> float: left;
> width: 499px;
> margin-top: 0px;
> margin-right: 0px;
> margin-left: 0px;
> }
>
> What do I do to make it showcorrectly in IE?
>
> Also, in Firefox, the center column isn't actually
centered between
> the two
> sidebars, but I'd like it to be. Any clues?
20% + 20% + 499px = ?
You can't mix measures like that. Try replacing 499 with 60%.
Your float
will now drop in all browsers. Why?
20% + 20% + 60% = 100%
But the borders and padding you've assigned are added to the
width,
resulting in another mathematical improbablility. The easiest
way to fix
that is the remove the padding and borders from the main
boxes and then
nest content boxes inside the main boxes. Assign your borders
and
padding to those nested elements.
Al Sparber - PVII
http://www.projectseven.com
Extending Dreamweaver - Nav Systems | Galleries | Widgets
Authors: "42nd Street: Mastering the Art of CSS Design"

Dynamically Hiding Column in a Table View in VC Model

How to dynamacally hide the columns in a table view in a VC model. Through the expression in Control Property, Form element/field or table view as a whole can be made hidden, however, the individual column can not seem to be hidden.
I am using VC server version 700.8.0.1.
Any help would be much appreciated.
Kind Regards
Sanjoy

In this scenario, if the source is SAP BI, you can use the webapi commands. If not, you would have to have 2 separate tables in different layers and you can show and hide those layers or UI elements...

Hiding columns in view.

Similar Messages

Maybe you are looking for