How Display Additional Field of a Select Expert Wizard Result
I have a group of records by customer. I have performed a Select Expert to pull the latest dated record for the customer. But I also need to display the subtotal value associated with the selected record of latest date. How do I do this?
In the field explorer use Running Totals and place them in the required section.
Thanks,
Rakesh
Similar Messages
-
How can I modify the contacts template in either iCloud, my iPhone, or my iPad to display additional fields that I always use ... example: How can I get Job Title to always be a fillable field with out selecting "add field" everytime?
Let the HairSalon implement the java.lang.Comparable interface. You'll need to write code for
public int compareTo(Object o1, Object o2)
The compare method would cast the Objects to HairSalons and return the difference in price.
Then use java.util.Arrays.sort(Object []); -
How to display additional fields in the results a 'search user'?
This may be a newb question but how can I display additional user attributes in the results of a user search in the admin console?
i.e. more than just the standard fields of: User ID, First Name, Last Name, Status, Enable, Disable, Unlock and Delete.
I would like to include some UDFs that I have defined for the create user form e.g. personnel number.
Thanks,
BernieThats not gonna work for sure. Thats to include additional attributes in the search input parameters drop-down. There is another procedure to do that, but not very sure if it works or not because once I was decompiling the code and found that it doesn't have an implementation. You can anyway try it out, the worst would be that you would not be able to see the column headings, but try atleast:
And thats through the use of properties file. Open up ** and search for the following section-
*#global.request.users.selectedListDisplayFields=*
*#global.request.users.selectedListDisplayFields.lables=*
Remove the comments and update it to below-
global.request.users.selectedListDisplayFields=USR_UDF_EMPID
global.request.users.selectedListDisplayFields.lables=global.xmlmetadata.users.USR_UDF_EMPID
where USR_UDF_EMPID is the UDF and global.xmlmetadata.users.USR_UDF_EMPID is its associated translation.
Thanks
Sunny -
Hi all!
I have the following requirement to address via ADF:
When the user select one checkbox within a form some further fields should be displayed on the page, without perform any "validation" action on the previous fields.
In ADF partial submit is available only on commandlink and commandbutton.
How can I refresh a portion of page (panelgroup) according to checkbox value?
What are the possible solutions that we have for this?
Have you got some code-snippet to show me a workaround?
Thanks in advance
Edited by: Federico Leopizzi on 23-feb-2010 16.36Hi Federico,
set autoSubmit="true" on your af:selectBooleanCheckbox and the partialTriggers on a component surrounding your additional fields.
See " Only Rendered ADF Faces Components Can React To PPR"
http://blogs.oracle.com/Didier/2008/04/only_rendered_adf_faces_compon.html
Regards,
Didier. -
Adding additional field 1 to selection screen of CATSSHOW (CADO)
Hello all,
We recently added one of the additional field's to show up on the data entry section when using
transaction CAT2...This is working fine and the data is entered into CATSDB.
When using CADO, one can display the addtional field 1 and sort by this field.
However, the users now want this additional field1 to be one of the selections when they
use report CATSSHOW (CADO).
Is there some type of way to configure SAP to have one of these additional fields show up
as a selection field on program CATSSHOW (CADO)? My searches in this forum and the web
have not shown me a solution yet.
Or do I have to create a 'Z' version of CATSSHOW like ZCATSSHOW and do this myself?
Thank-you,
Rick CrawfordEnhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better . -
Query Report - To display additional column in list selection box.
Hi,
There is query report where i want to display the additional column in list selection.
Below is the system query report, where parameter passed is card code.
When the cardcode - list selection is clicked system displays 2 columns i.e. Customer Code & No. of Records.
Now in the same list selection; is it possible to display the customer name along with cardcode only for reference.
SELECT T0.DocDate, T1.SlpName, T2.Name, T0.DocDueDate, T0.DocNum, (CASE WHEN T0.DocStatus = 'O' THEN 'Open' ELSE 'Closed' END) AS Status, T0.DocTotal FROM OQUT T0 LEFT JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode LEFT JOIN OCPR T2 ON T0.CntctCode = T2.CntctCode WHERE T0.CardCode = N'[%0]' ORDER BY T0.DocNum DESC
Kindly let me know the details.
Thanks & Regards,
Yogesh JadavHi Yogesh Jadav,
The answer is NO. You may only display either code or name but not both.
Thanks,
Gordon -
How display number of row in select statement
How can I display number of row in select statement?
Table
data1 data2
xxx ccd
wss qwe
qws uij
I need get from SELECT statement:
1 xxx ccd
2 wss qwe
3 qws uijuser13734495 wrote:
Thank you from answer.
Statement
select rownum rn, data1, data2 from table
is good.
And what have I do went I use
select rownum rn, data1, data2 from table order by data1
and I get
3 qws uij
2 wss qwe
1 xxx ccd
I need
1 qws uij
2 wss qwe
3 xxx ccdhence the importance of describing the complete problem.
select
rownum,
data1,
data2
from(
select
data1,
data2
from
table
order by
data1) -
Display additional fields in Service Request detail page
Hi All,
Is it possible to display some fields like Account Type, Contact Type etc. in Service Request detail page?
Service Request Field Edit page only allows to add default value to the newly created field, that's not the result that I needed.
Any suggestions are appreciated.Bruce,
There's a function called joinfield value that will allow you to bring across information from those pages, if you email me (alex.neill@{see profile}) I'll send you the document.
cheers
Alex -
How to add new additional field in my selection screen?
Hi,
In the BEx ,I have key and name in my report.While seeing the report, heading for customer number is coming and heading not coming for customer description.I need to have it in my report.
I.e
Customer ! (This heading is missing)
7 GABRIEL CHEMIE GMBH - AUSTRIA
9 BERGER PAINTS BANGLADESH LTD.
Any tips? Points will be given.
Regards,JaheerHi Jaheer ,
If you talking Abuot heading in out put screen then use TOP-OF-PAGE
or Else you use "Write:/ " Statement in you program...So that when first line is complete it will go to next line...
What I understand from your Question....
Souman -
How to Add fields in dynamic selection LDB BRF
Hi All,
I have requirement to add a field BSEG-ZLSCH in Logical Database BRF dynamic selection.
I have tried doing the same by using below mentioned link but its not appearing in the report dynamic selection screen
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e0039a-0d79-2c10-0aaf-9f6c062c0ffb?quicklink=index&overridelayout=true
Could you please help me a Legal change delivery is pending due to this issue.
Thanks and best regards,
Niteesh RaiDear Niteesh,
The Logical Data Base BRF reads table BKPF and BSEG, but there is no
option to include fields from BSEG in the dynamic selection.
You can display all the tables included in BRF, but only fields from
BKPF could be included in the dynamic selection. You cannot add
entries from BSEG, BSET, KNB1, KNBK, and so on that are listed here.
You are right, there is not note that explains this behaviour, but I
inform you what is the system design. This has been confirmed by my
Development colleagues.
Regarding to note 832997, this is valid for releases 500 and 600 when
New G/L is available. The system functionality has been enhanced in
release 500 so you can add fields from FAGLFREESEL that is similar
to BSEG with New G/L.
BR, Hana -
How to use field symbol in select
Hi,
CONCATENATE 'WTG0' LV_MON INTO LV_FNAME.
ASSIGN (LV_FNAME) TO <FS>.
SELECT SINGLE <FS> FROM COSP INTO LV_SAPRST
WHERE OBJNR = LV_OBJ AND GJAHR = LV_YEAR AND WRTTP = '4' AND KSTAR = GT_INOUT-SAKNR
Error message : Unknown column name "<FS>" . field list. . field list. field list.
actually , if i use if command, i can do, but i want to use simple code by fieldsymbol.
is it possible in select command?
Thanks in advance
BenjaminHi
Hope it will help you.
reward if help.
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols -
How to restrict field range in selection screen in adhoc report
Hi Experts,
I have created one adhoc report in which i have to restrict region values range when i searched for particular company code.is it possible to restrict in adhoc report.
For example when i searched for particular company code US the values in region gets restricted automatically to US country itself.
Thanks&Regards,
narasimha.Hi,
how to restrict region list to particular company code in Adhoc report.Could you please explain it in brief .
Regards,
narasimha. -
Additional field in selection screen of a abap query
Hi,
I am adding a new additional field in the selection screen through abap query(using transaction SQ02) which is of type VBRK-FKSTO.
The value entered can be 'X' or empty space.But the value which is entered in the selection screen is not getting reflected in the code.Kindly advice me on what needs to be done to capture the selection screen value in the code.
Regards,
S.SubasreeHi
You can add new field in VFX3 selection screen as follow. In the report code we can see various explicit enahcement points provided by SAP.One of them is ENHANCEMENT-POINT sdblbddl_01 SPOTS es_sdblbddl STATIC. Here you can declare your selection screen parameters. Then in the processing i can see a call customer fucntion happening in VBSK_DISPALY which you can implement to add your logic.
Thanks
Nabheet -
Additional fields to fbl1n, fbl5n, fbl3n
Dear all
Can you please explain step by step how to add additional fileds to the above reports.
Many thanks
PThere are certain field which you can populate by following standard config
For FBL1N report - IMG-FIn accounting>Ar & AP>Vendor accounts>Line items>display line items>Define additional fields for Line item display
For FBL5N report - IMG-FIn accounting>Ar & AP>Customer accounts>Line items>display line items>Define additional fields for Line item display
For FBL3N report - IMG-FIn accounting>GL accounting>Master data>G/L accounts>Line items>Define special fields for Line item display
After you have saved the special fields in the above config, the additional fields can be selected in the line item layout in the change layout mode with the above line item display transactions. If you don't see them still, then execute the program BALVBUFDEL (t-code SE38), and then go back to the reports.
If you want to add certain fields which are not available in the standard config, then take help of you ABAPER who can
-Append structure RFPOS/RFPOSX with additional fields
-Fill the field value with BTE 00001650
Thanks
Ron -
FBL5N : Adding additional field PERNR to layout
Hi experts,
I had added additional field PERNR - personnel number in FBL5N layout for displaying in output.
I had added pernr- personnel number by following the path
SPRO -> Financial accounting ( new ) -> accounts receivable and accounts payable-> customer accounts ->line items -> display line items -> define additional fields for line item dispaly
here i added bseg - pernr
after adding , in FBL5N layout the field is appearing , but it is displaying blank in output .
Is there any thing needs to be done to display additional field in output of FBL5N.
kindly give me any suggestions.
thanks & tregards,
Raghul
Edited by: Raghul Gandhi on Mar 23, 2010 9:30 AMHi,
FBL5N: customer line item display.
BSEG-PERNR: personnel number.
Under which circumstances should BSEG-PERNR contain a value if you create customer related postings?
If there is no personnel number given during posting (why should it?) the field added to the FBL5N-layout will be empty.
Best regards, Christian
Maybe you are looking for
-
How to encrypt the text in password field in Oracle Forms version 6i
Need help! How to encrypt the text in password field in Oracle Forms version 6i? one way is to change the settings in the property palette. Can somebody provide me some script to be run while the form is running which will enable the password to be e
-
I just bought ipod and..
Well i just bought a 30g ipod video and its not being found by itunes or the updater. updater always says cannot mount ipod. itunes just doenst find it. i have uninstalled and reinstalled the software, reseted my ipod, restarted my computer, and look
-
Can anyone let me know how to convert my videos on my 6300 to playback on pc/facebook
-
IProcurement Customization Non-Catalogue Request
Hello, We are looking to have information on how to create a customization on the Non-Catalogue Request Form so it has the category filled by default. Please let me know if someone has done this before and how to achieve it or where to look for docum
-
I would like to thank all of those who are posting hints for dealing with a slow safari. I have two iBooks one running 10.2.8 and the other running 10.4.2, both of which seem to be infected. Last evening I did make a few changes to the 10.2.8 iBook.