How do I install user client access licence on Windows Server 2012
I have recently setup a Windows Server 2012 Std. I have not configured any roles yet. The server licence has been installed and activated successfully. How do I get my Windows Server CAL 2012 ( tracking ID is 15 digits) onto the server. I have google
but did not get the correct result. The closest I found was
http://technet.microsoft.com/en-us/library/cc540509(v=ws.10).aspx.
I am not too familiar with the Server 2012 display so I am not certain if I am missing something. If the CALs are not captured on the server, will this restrict user access to the 2012 server?
I thank you in advance for your assistance.
Hi,
I’m glad to hear that you have found the thread as reference. As DonPick mentioned, since these are Windows Server CALs, there is no activation nor input of any kind needed. You bought the
CALs, you have the paper, you are now licensed, there is no configuration step necessary. If there is anything else I can do for you, please do not hesitate to let me know. I will be very happy to help.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support
Similar Messages
-
How to allow more than two users on remote desktop on windows server 2012 foundation?
i have a dell server power edge T300 with windows server 2012 foundation. I am unable to connect more than two remote desktop at once.
Hi,
Add to Brain, you cannot have more than 15 user accounts in Windows Server 2012 Foundation.
In order to access a hosted application, such as Microsoft® Office, a license for Windows Server 2012 Remote Desktop Services is required for each user account (not to exceed 15 user
accounts) that directly or indirectly uses RD Gateway to host a graphical user interface, including using Remote Desktop Connection (RDC) client. When using Remote Desktop Services, you may not install or use Remote Desktop Connection Broker or Remote
Desktop Virtualization Host role services. For more information about Remote Desktop CALs , see http://go.microsoft.com/fwlink/?LinkId=140238.
http://technet.microsoft.com/en-us/library/jj679892.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support -
How to grant database user to access directory under web server
Hi
I'm running forms6i application on Oracle9iAS.
This application access to several directories using WEB.SHOW_DOCUMENT procedure.
I add this directories to UserDir directive in httpd.conf and I also made an Alias (virtual path).
The problem is that all users can access to that directory.
Can I eliminate access to the directories just for particulare users?
Thank's,
TomazPl refer to the httpd.conf file
and for the directory tag assign deny all,grant all will
solve ur prob...
if possible pl let me know..
how u have configured ur forms appln on oracle 9iAS using apache
server....
i have tried but it gives me error about the forms engine..
how do i make apache server know about the forms60/f60all.cab
and other required configuration files
pl let me know at the earliest
thanks -
How to initial DB2 user profile when telnet to windows server
When I telnet to Windows server using db2<SID>, I issued command "db2", get error "DB21061E Command line environment not initialized" . How to initialize user DB2 profile? Please advise.
Thanks
JamesHi,
you need to setup the command line environment to run commands. If you go through the start menu, you
will see that there are two UDB "command line" type environments. One of them opens a "vanilla" command window with all of the initialization done to allow using db2 commands, the other opens the CLP environment.
regards,
kaushal -
How do Snow Leopard iCal Clients access a Leopard iCal Server?
Could someone please explain how to set up Snow Leopard clients to a Leopard Server. And if it is possible. Thank You.
Greetings, Jamil.
Could someone please explain how to set up Snow Leopard clients to a Leopard Server.
Sure. Pretty straight forward if you are the client (server setup is another matter and would not be addressed in this forum).
Option #1 -- Assuming the clients are to have read /write access to the calendars:
Go to the Help menu in iCal and type in "CalDAV". You will see this as a result: Setting up a CalDAV account in iCal
You can read the article here as well which details how to add a CalDAV account to iCal: http://docs.info.apple.com/article.html?path=iCal/3.0/en/15563.html
All you need are the CalDAV settings from your 10.6 Server running CalDAV (iCal server). You would get those from whomever setup/manages the 10.6 server.
__Usually consists of a user name / account name and password.
If they don't know how to find those settings they can visit the Mac OS X Server forum: http://discussions.apple.com/category.jspa?categoryID=96
Option # 2 -- Assuming the clients have read only access (calendar subscription):
Go to the Help menu in iCal and type in "Subscribe". You will see this as a result: Subscribing to calendars
You can read the article here as well which details how to subscribe to a published calendar: http://docs.info.apple.com/article.html?path=iCal/4.0/en/9869.html
Hope that helps. -
Domain Controller deletes user account settings and applications - windows server 2012
once in a month, when the user logs into his account, his settings and some applications get deleted. he has to install the outlook again, dropbox gets deleted, setting on the desktop disappears (files are still there) etc
I am not sure about the cause or the solution. please let me know what i can do to fix thisHi,
All the user has the same issue?
Did the issue occur when you log into the Domain Controller?
Any event id in event viewer?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hi all;
Please look at the following figures:
Any ideas?
Thanks
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to add addition Client access licence in my runuing server
Dear Team
I have windows server 2012 with 9 user cal, but i need add more cal in my running server. So plz provide me the step , how to add cal in muy running server.
Regards
RashidHi,
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/windowsserver/en-US/63f9b46a-cacd-44de-8118-3bba3f2ef648/how-to-add-client-access-licenses-to-windows-server-2012-standard?forum=winserverTS
Regards,
Gopi
www.jijitechnologies.com -
Windows Server 2012 Essentials (not R2) - all client computers offline
The server is Windows Server 2012 Essentials (not R2). I have had this problem ever since I first installed the Windows Server 2012 Essentials server in the summer of 2013 (before R2 was released). The Windows Server 2012 Essentials server shows offline
for all Devices under Dashboard. (Allow me to add that I just installed another site with Windows Server 2012 Essentials R2, and it was a breeze - all of the computers at the second install site are online.) I have one Windows 8.1 Pro client and the rest
are Windows 7 Pro clients. The problem occurs on ALL client computers.
I have removed computers from Devices in Dashboard on the server, rebooted the server, changed the client computer to a workgroup, rebooted the client computer, and reinstalled the connector software on the client computer. Same result. I
have tried this on a Windows 7 Pro client and a Windows 8.1 Pro client with the same results.
After running the connector on a client computer and waiting for the server to update its Devices status, if I look under Devices on the server Dashboard, the Windows 8.1 client computer will say online but within 24 hours it goes offline again. The
Windows 7 client computers never show online. Both computers stay offline - they NEVER show an online status (referring to the status under Devices in Dashboard).
I should make it clear that the clients can access the server shares with no problem. File synchronization works great. The clients can ping the server and the server can ping the clients. But client backups on the server fail.
One of the most troublesome things about this problem is that it prevents the client computers from being accessed remotely using the website setup by Anywhere Access. I can login to get remote access to the shared files on the server, but
the only computer that says "online" is the server. All of the other computers are "offline".
The server and clients are only using Windows firewall. The clients all use Microsoft Security Essentials for their anti-virus.
I used a troubleshooting tool that tells me that there are problems with port 6602 on the server, but the clients are all fine with port 6602. I know port 6602 is important for using Anywhere Access but I am still trying to find out more details on that.
I have checked all of the firewall settings related to port 6602 on the server, and the firewall settings look like the standard Windows settings for this port. I used netstat to find the PID associated with the port, and I looked up the PID to find the service.
That all looked standard, too.
I have been working on this problem since the summer of 2013!! Does anyone have ANY suggestions?!!
HELP!Hi,
Just addition, please check if all necessary Windows updates are installed on those
“Offline” client computer.
When connect client computers to the Windows Server 2012 Essentials server by using the Connector software, there
will be LAUNCHPAD on the client computer. Was this LAUNCHPAD grayed out? Please check if can access Shared Folders via this LAUNCHPAD. Meanwhile, please ping the Windows Server 2012 Essentials via IP address and server name when client computers show as
Offline. Any find?
Get Connected in Windows Server Essentials
In addition, please follow the path on Server and client computer:
%programdata%\Microsoft\Windows Server\Logs. Did you check any relevant Server-side logs and
Client-side Logs if find more clues?
Windows
Server Essentials 2012/2012 R2 Log Files
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
SharePoint 2013 with sp1 install on windows server 2012 R2
Hi All:
excuse me I have a question about sharepoint installation. I install sharepoint 2013 with sp1 on windows server 2012 R2,but i always got "Configuring Application Server Role, Web Server (IIS) Role"
message. I refer to this article <http://support.microsoft.com/kb/2765260>. I still got this message ... Which I did wrong step ?? I have been troubled for a long time, thanks to the help ...Hi TiM,
According to your description, my understanding is that you got an error when you installed the prerequisites for SharePoint 2013 SP1 on Windows 2012 R2.
Please make sure that you have installed .NET Framework 3.5 on Windows Server 2012 R2, and enable .NET Framework 3.5 by using the Add Roles and Features Wizard.
Here is a blog you can refer to:
http://blog.migrationking.com/2013/11/how-to-install-net-framework-35-on.html
Reference:http://social.technet.microsoft.com/Forums/en-US/55589deb-cddf-445f-be41-b4c97f06ff4d/sharepoint-2013-sp1-on-windows-2012-r2?forum=sharepointgeneral
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support -
How to port forward in windows server 2012 ? for IIS
Hi,
I have windows server 2012 in AWS cloud (Public IP)
Installed IIS 8 and running website in the port 8980 and its working fine (Public IP)
My question is
I have CNAME record in Godaddy in the name of example.com which is pointed to my PUBLIC IP ... its working fine.
But I want to know how to port the 80 request to 8980 in windows server 2012 thanks.
WesHi,
According to your description, my understanding is that you want that example.com(in Godaddy) to transfer corresponding queries(port and website name) to the website on WS 2012(in AWS cloud).
Since your domain example.com is supported by Godaddy, I recommend you to contact the supporter of Godaddyand confirm that if their product supports port forwarding.
In general, if you useWindows ServerInstruction, we may enable NAT(Routing and Remote Service) on network interface to redirect services/ports.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Installing Windows Server 2012 RC Remote Desktop (ISSUE)
Installing the RD Host Service doesn't work and I get several errors. Any Hints?
You cannot be serious. I approached your Microsoft "Gold certified" software partner 'Cancom Germany' with the following requirement:
- Need a Windows 2012 "Terminal Server"
- for 15 client devices
- currently no AD or other Windows servers installed
What do I get sold:
- Windows Server 2012
- 15 Device CALs
- 15 RDS device CALs
and the information that I need to setup AD and the RDS roles. So far so good.But I run into these error messages when setting up the RDS roles.
Now you are telling me that I need another server running just for the AD? Which I do not need for anything except for the internal requirement of the RDS services?
Please elaborate a bit more on the way to get it work on the same machine or suggest another solution (btw buying another license for the AD server is not a solution).
Totally agree with you. buying extra server just for AD or broker frustrated me. but I found a patch here
http://support.microsoft.com/kb/2799605
I don't know if it is too late, but hope it can help others -
Hi All,
I have installed SharePoint 2013 prerequisites successfully on windows server 2012. While installing SharePoint 2013, system struck on for several minutes. I have restart my system manually. Later I then installed prerequisites which showed a successful
lessage. But When I try to install SharePoint 2013. I am getting the following error:
trial editions and lincensed editions of SharePoint, Project Server, and Office Web apps products may not be installed on the same server.
I am unable to find solution for this issue. what is the solution for this?
Thanks in Advance..
Prem KumarTo be honest, the quickest thing you could do (and what I would do regardless) is re-build the server (re-install Windows).
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Installing Exchange 2013 on Windows Server 2012 R2
Now that SP1 has been released, it is supported to run Exchange 2013 on Windows Server 2012 R2
But since it is not yet possible to download Exchange 2013 with integrated SP1 (slipstreamed), is the following installation procedure supported:
- Install Exchange 2013 (without SP1) on Windows Server 2012 R2
- Install SP1 on top of Exchange 2013
If this is not supported, can someone tell me when the Exchange 2013 with integrated SP1 (slipstreamed) download will be released?yes the SP1 is the full product. if you need step by step instruction to migrate to this new version you can get info here : http://buenoflex.com/install-exchange-2013-sp1/
Arnaud Buonaccorsi - GSX Groupware Solutions
http://www.buenoflex.com
http://www.gsx.com <= The monitoring solution for Exchange and Sharepoint -
Exchange Server 2013 SP1 Install on Windows Server 2012 R2
I am trying to install Exchange 2013 SP1 onto a Windows Server 2012 R2. I get an error message that the operating system is not supported. I have installed all the prerequisite.
Does that mean that you can't install Exchange 2013 Sp1 with a Remote Desktop Role together included with Server 2012 R2?
Or is it possible to restore the Remote Desktop Role afterwards?
You can't install any build of Exchange 2013 on any server that has the RDS Role installed. So in other words, this is not a "limitation" with Exchange 2013 SP1 and Windows Server 2012 R2.
Additional Reading, check out: Exchange OWA/Activesync conflicting with RD Gateway
role
Martina Miskovic
Maybe you are looking for
-
Item Category in Stock transfer requisiton.
Hi, I have created an stock trnasfer requisition thrrough MRP. Even though supplying plant belongs to Different compnay code, purchase req. is created with Item category U. is there any setting which triggeres item category U in PR when created throu
-
How do I save a password for a site if I am not prompted by Firefox?
I am trying to save a password for a site that I previously chose not to save one for. I have tried: Going into my exceptions list - it's not listed Going into my saved password list - there's no option to manually add a site Checking the forums but
-
Hi, we have the need to supress bank/payment data in the vendor master (MK03, FK03, XK03) as well is in invoices (MIR4). I know this can be done via Define Screen Layout per Activty in the IMG. The problem this presents is that there are some users
-
My Charger is broken but still under warranty but I'm not near any apple stores, can I just call I send my old one back and they send me a new one
-
Mutiple SID on a Single Intstance
I'm very new to oracle and I'm currently learning on Oracle express 11g. I'm using the Oracle SQL developer to view the database tables, I've connected to the XE SID name and once I expand the tables I see all of these default tables that comes with