How do i wirelessly install a cannon 5320 printer?

How do I install my Cannon MG5320 printer wirelessly to the Mac so I can also use Airprint with an iPad?

this has been covered before. you know this is the Mac Pro section of things, right?
okay. First, grab the Printer Update Utility from Canon. . Turn the printer off then on. connect with usb cable. run printer update utility to upgrade to firmware 2.0. turn printer off then on again. airprint should work from then on. You can't update via WiFi, so I've read. Other than that, I suggest you snag a copy of canon's manual for this, and check it out for how to set up wireless printing between it and your Mac
John b

Similar Messages

How do I un-install the Universal Crossword Print Widget?

The Universal Crossword Print Widget has been discontinued, and there will be no new content. However, you can still receive the Universal Crossword printable by subscribing on your HP web-enabled printer’s front panel, or by visiting HPConnected.com (in the U.S.) or ePrintCenter.com (elsewhere). Note: You will need an HP printer to subscribe.
Here’s how to uninstall the Print Widget:
In Windows 7:
Click the Windows button .
Click Control Panel.
If View By is set to Category, click Uninstall a Program under Programs (otherwise, click Programs and Features).
Select the Universal Crossword widget.
Click Uninstall.
Universal Crossword Print Widget (c) 2011 Universal Uclick. All Rights Reserved.
I work on HP's behalf.

Hi Mary56,
If it is on your printer, it is not the widget, but a printer app. If it is on your computer, you have to uninstall the program (see directions at the top of this thread).
I will send a note to Jaime, who helps with printer apps and he will get back to you if this is a printer app. If it is, it will help if you tell us the printer model number.
Or, perhaps you can fix it yourself by checking out the instructions on this link:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/how-to-cancel-automa...
Best of luck,
Mary
{I work on HP's behalf}

HT1338 I want to print via my orang livebox through a cannon mp210 printer/scanner. Orange and Apple information suggests this can be done. I have attached the USB cable to the livebox and printer, reset the livebox no result. installed printer cd on imac

How do I print wirelessly via a cannon mp210 printer/scanner. I have followed guidance re-routing the USB from PC to livebox and printer, reset the livebox and installed printer drivers on the imac to no avail.

How do I print wirelessly via a cannon mp210 printer/scanner. I have followed guidance re-routing the USB from PC to livebox and printer, reset the livebox and installed printer drivers on the imac to no avail.

Wireless Install Videos - Windows 7

I wanted to share a few different videos we've created that show how to do a wireless install in Windows 7. If you're not sure which video applies to you, watch the first one on the list.
Installing an HP Full Feature Printer Driver in Windows 7 (Wireless)
This video shows you how to download and install a full feature printer driver. When you download your software, you can choose between a full and basic version of the software. The full featured driver is much larger, but is strongly recommended as it provides more features and functionality for your printer. The installation shown is a wireless setup using a USB cable.
The steps shown may not match exactly what you see on your screen. For videos and help specific to your printer, visit www.hp.com/support or www.youtube.com/hpprintersupport.
Install an HP Printer in a Wireless Network Using an Access Point in Windows 7
This video will show how to download and install a full feature driver from HP.com on a wireless network using a wireless router or access point in Windows 7.
Installing Your HP Printer Using a CD in Windows 7 - HP Laserjet Pro CP1025nw
This video shows you how to install your LaserJet printer on a wireless network in Windows 7, using the CD provided with your printer. The printer shown is the HP LaserJet Pro CP1025nw.
Installing Your HP Printer Using a CD in Windows 7 - HP Laserjet Pro CP1525nw
This video shows you how to install your LaserJet printer on a wireless network in Windows 7, using the CD provided with your printer. The printer shown is the HP LaserJet Pro CP1525nw.
Windows 7 Install (Wireless with USB and CD) - HP Laserjet P1102w
This video shows you how to install your LaserJet printer on a wireless network in Windows 7, using a USB connection and the CD that was provided with your printer. The printer shown is the HP Laserjet P1102w.
Wireless Windows 7 Smart Install - HP LaserJet P1102w
This short video shows how to do a wireless install using the Smart Install feature on an HP Laserjet P1102w in all versions of Windows 7.
This one isn't an install video, but is helpful if you're doing an install and you need the password to your wireless network.
Using the HP Print and Scan Doctor to Retrieve Your Wireless Network Password
Learn how to retrieve your wireless network password or key using HP's Print and Scan Doctor.
Retrieving your network password is useful if your computer is set up on your network, but you can't remember your password for the network.
I am an HP employee.

This is a great collection of support videos. Thanks for compiling them into one place.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Problems installing and uninstalling Cannon 620 printer

I tried to install a Cannon 620 printer. It seemed to go ok, showed up on the printer list when I tried to send a job, but it wouldn't come online and print. I fiddled around (bad idea) and changed the printer sharing parameters, and now whenever I try to go into system preferences, printer/fax, it freezes and I have to force quite. Same with other apps when I try to do something with the printer (like word). I tried to uninstall, but can't get to the driver to uninstall it, as it is in systems preferences. Any suggestions for how to uninstall even though I can't get into the system pref printer options? Thank you!

Hi Kappy, thanks for the advice. Unfortunately, the problem is I can't even get into Print & Fax to select the installed printer, as soon as I click on it I get the spinning wheel and not responding, and have to force quit.
The freezing up is also now happening in word (which I used to try to print a document to the new printer). Any other thoughts? Thank you!

HT1338 how to install hp jet 1000 printer software on my mac

how i can i install hp jet 1000 printer software, connect it to my mac book air and get it to operate?

If your printer were AirPrint compatible, this would explain how to do it:
AirPrint basics
But I believe your printer is not one of those listed in the article as AirPrint compatible. So you'll have to visit HP's website for help.

Just purchased Lion...how long for the install wirelessly?

Just purchased Lion...how long for the install wirelessly?

Yes, the installer will launch automatically and wait for you when you wake up to proceed with the Lion installation.
Good Luck, and remember to back up your data always before installing operating systems or OS patches.

How to print from Macbook Pro on a Cannon MP610 printer?

I have recently bought a Macbook Pro, and I have a wireless network set up at home.
I have no problems connecting to the internet or the network. But I can't seem to access the printer. I have a Cannon MP610 Printer. This printer is connected to the PC, which is connected to the modem. The printer is unable to connect directly into the modem which is unfortunate
It's a fairly big network. We have a master pc that is connected to the modem. This master computer also has a usb printer. We have a secondary pc ethernet linked to the master pc, which can connect to the internet and the printer via the ethernet.
The modem is a Thomson TG782T ADSL.
We have 3 windows O/S laptops, and 2 MAC O/S laptops.. No laptop can access the printer. Only the internet.
Can you access a printer from a laptop through the modem through the master computer the the printer?
The printer is turned on, and the PC is always running. The printer and file sharing is turned on.
What would be the least expensive way I could go about fixing this problem?
I have heard about people downloading Gutenprint; so i downloaded it, but couldn't get it to run.
I have tried many different ways, and after adding a new printer and finding it on the network.. is then says it is in the queue list.. but won't print. It just sits there until you cancel it.
Thanks in advance
Jason

Jason Paige wrote:
How can I use the Gutenprint driver on my Mac? All it does is downloads and installs, but it wont allow me to use it. (Like it doesn't come up under applications or anything).
Installing printers on Mac's is usually a two step process. The first is to install the driver software if it is not on the Mac already and the second is to add the printer queue. OS X 10.6 comes with Gutenprint v5.2.3 already so would be no need to download and install again, unless you customized the OS X installation and selected not to install the printer drivers or you have a model of printer that only a later version of Gutenprint supports. Since your MP610 is listed as a supported model with v5.2.3 then the downloading was probably a waste of your time.
To add the printer when it is shared by Windows you open Print & Fax, select to add ( + ) and then select the Windows icon. This will open a pane showing three columns. The first column is for workgroup names and since you mention you're using XP Home then your workgroup name will be 'mshome'. If your Mac does not see 'mshome' in the first column then we need to look at the IP addresses being used by your computers.
IP address:121.222.186.51
According to "what is my ip address.com" it says my MacBook Pro and master desktop PC has both the same IP addresses. Is this meant to be correct?
Looking at the IP address listed this is going to be the address of the Thomson router. If all computers were using the same address then this would be a problem but given that you used a web service to tell you the address then this won't be the case.
To see what IP address, subnet mask and gateway address you are have configured, you can use Command Prompt on XP and type "ipconfig /all" (without the quotation marks) and press Enter. This will give you a list of all the network settings in the PC. Write these down for later reference.
For the Mac you can open System Preferences > Network and select which port you are using (Ethernet or Airport). Then in the right pane will be the current IP address. To get more information you can press the Advanced button and then select the TCP/IP tab in the next pane.
How do I create a PMB queue? And how do I find out if I can ping the master PC? (what's your definition of ping?)
It's an SMB queue and I suggest that we leave that process for now. Besides you will need to know the IP address of the XP sharing the printer before we can try that process. So let's just try to get the computers appearing in the Windows Add Printer browser and using the Gutenprint driver instead of the Canon.

HT2250 I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

Well, you could install the drivers to the wireless printer in you other computers.
blue apple > System Preferences... > sharing
check printer sharing.

How does does Wireless and a Wireless card work?

I bought an imac G5 1.8ghz We already have a BT wireless connection and I want to hook up to that. I gather that I need an airport card but I'm not sure how to insert a card into the machine there is a CD portal and ones for USB as well. How does this wireless business work and what do I need for my machine running Tiger 10.4.11?

The AirPort Extreme card appears to be the correct product
but you should be able to tell from some of the Apple Support
information in the form of their product support page for your
specific computer model. The main support section has a side
bar menu of products and if you find iMac G5, then look into it
further, you can identify what exact model iMac G5 you have.
{+If you have looked under the Blue Apple in the Finder menu bar+
+and chosen About this Mac> more info> System Profiler> then,+
+look under Network> Airport card, you can see if one is installed+.}
There are manuals, instructions and other info available, too.
The manual to install the physical AirPort Extreme card is in
the manuals link in the iMac G5 page in Apple Support.
Since there were a few different models of iMac G5, you should
be sure to get the install instructions that match your computer.
The card itself could be used in many different Mac models, so
it will NOT have installation instructions with it for your iMac G5.
{The hardware installation is the point of reference here; not the
CD software, which very likely is outdated and not needed at all.}
Apple - Support - iMac G5 models:
http://www.apple.com/support/imac/g5/
Apple - Support - Manuals:
iMac models (from newer Intel, on back to older)
http://support.apple.com/manuals/#imac
Since the iMac G5 (PPC) and iMac (Intel) look similar, you
will have to identify your computer in the G5 category to
be able to get the correct AirPort installation instruction .pdf.
How to Identify your iMac (note three designs)
http://support.apple.com/kb/HT1463
The software CD included with that older Airport Extreme package
will likely be older than your OS X version in the computer now.
{So, you will NOT need to install that software to use the AirPort card.}
Examples of .pdf download manuals on how to install an Airport card
are as follows (these are actual links to these manuals.) +So, these may+
+not be for your specific iMac G5 computer.+ To be sure, use Identify page.
• _iMac G5 20-inch_ AirPort Extreme Card Replacement Instructions (Do It Yourself Manual)
iMac G5 AirPort Extreme Card, 20-inch 4. Pull the tab on the card to remove the card from
the AirPort card guide. Important:
http://manuals.info.apple.com/enUS/imacG5_20inchAirPort.pdf
• _iMac G5 17-inch_ AirPort Extreme Card Replacement Instructions (Do It Yourself Manual)
iMac G5 AirPort Extreme Card, 17-inch 4. Pull the tab on the card to remove the card from
the AirPort card guide. Important:
http://manuals.info.apple.com/enUS/imacG5_17inchAirPort.pdf
{Since the above are examples, and there were more than two designs, you should
check the ' how to identify your iMac ' page under the iMac G5 and Intel, to be sure.}
Good luck & happy computing!
PS: if your 1.8GHz iMac G5 is a 17" LCD with Ambient Light Sensor, the wireless
AirPort Extreme is a built-in component: Model # M9843 (1.8 GHz) and in the older
1.8GHz iMac G5 20" the card is listed as an Optional part, in pre-light sensor model.
{ edited 2x - to add info }

I have upgraded to iphone 5 but my synch tab has disappeared on outlook. How do I re-install it?

I have upgraded to iphone 5 but cannot synch to outlook wirelessly. The synch to icloud tab has disappeared from outlook. How do I re-install it, please?

Did you ever get this resolved? I'm having the same issue too.

An install operation took too long to execute - wireless install of new printer

New printer, out of the box.
Every time I try and install the printer wirelssly using the CD Rom, it stalls at 99% install and returns message
"an install operation took too long to execute. this is a fatal error preventing product use." I have tried the following (in this order) with no success:
- Downloading latest driver (even though CD Rom install said I had the latst driver)
- Turning HP Smart Install off on the printer, removing the printer from Device Manager, rebooting and reinstalling
- Temporarily disabling firewall and virus protection software, removiremoving the printer from Device Manager, rebooting and reinstalling
Help!!

Hi @Slup ,
I see by your post that the installation is stalling at 99%. Thank you for provided all the steps you have already taken.
I would really like to be able to help you resolve this issue.
Disconnect the USB cable first.
Remove the drivers first from the Print Server Properties if you have a printer icon listed in the Devices and Printers window. Highlight the printer, across the top of the window, click on Printer Server Properties, on the Driver tab, highlight and remove the printer, LaserJetPro 200 clr MFP M276nw and any Universal PCL drivers.
Uninstall the software from the CD. Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
Uninstalling the Printer Software.
Then start the installation again, immediately follow the steps in this document after connecting the USB cable please.
A Fatal Error Displays During Software Installation.
Disregard the printer model. This should allow the software to fully install properly.
Test the printer.
How is the printer connected? (USB/Ethernet/Wireless)
Please let me know if you require any additional assistance.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!
Thank you very much for your help if any!!
This question was solved.
View Solution.

Quite a few questions there, Sends, but I will do what I can to answer them.
I would first recommend buying a router, even if it is one that you won't connect to the internet and network this with your other PCs and the printer. This will give you the best functionality and results for what you are attempting to do.
Additionally, the Auto Off feature of the printer can be disabled, and is not affected by the connection type. You can usually go through the Setup Menu and select Tools to change the options there on the energy saving features.
Lastly, the auto off feature on your computer is a Windows question, but an easy one to answer. If you are on a laptop you can right-click on the battery in the service tray (bottom right hand corner) and change the energy conservation settings.
You might be better off installing the printer through the USB cord and alternating that based on when you are using it, but that would be optimal only if you are printing only a few documents on an irregular basis. A networked connection is the easiest to manage over several computers, honesty, but you do have some requirements for that connection and limitations as well.
I hope this information is useful!

LaserJet Pro CP1025nw - Software Installation Stalls During a Wireless Install

In case anyone runs into an issue with the install freezing during a wireless install, HP has provided information on getting the unit installed properly in the following doc.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02607413&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Though I work for HP, My posts express MY opinion, and not those of HP.

Hello
I see that yous are having issue setting up the cp1025nw on the 10.8.
You can configure the printer on the wireless network through ethernet cable without any software.
Restore the printer back to factory settings if not already setup on the network from another computer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02471640&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Connect the network cable to the product and to the router. (temporary)
Wait about 1 minute and then print a configuration page.
(select operating system then select Method one.)
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02495036&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Use the ip address from the configuration page and type it in the address bar of browser (internet explorer, safarari)
This will open the embedded web server for the printer.
Select the networking tab, select wireless on the left side, set it to infrastructure and put in encrytian
(network passwords) apply then remove the ethernet cable from the printer.
Should have a solid blue light in about 1 minute.
Then on the mac just add the printer with the airprint driver.
Click on the Apple, click System & Preferences, and then click the Print & Scan icon,click add a printer, then select the printer from the list, make sure the name listed beside use: shows airprint, select add.
Test the printer on the wireless now.
Let me know how this turns out.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to properly clean install: erase, partition hard drive, and install tiger then SL

Hello,
     I am a noob at this, so if responders would be kind enough to be detailed / specific with any instructions it would be most helpful! I own a dinosaur apparently (even though I don't think so): the white (not unibody) Intel macbook2,1 (late 2006) 1.83 GHz with currently 1GB of RAM, but I have 2x2GB RAM sitting next to me ready for install. However, first I would like to do a clean uninstall of my computer (running OS X 10.6.8 SL). I also would like to properly partition my hard drive while I'm at it.
     About 6 months ago I had serious crashing issues, along with kernel panics, hangs, applications randomly appearing & disappearing, system settings and options doing the same, fans running high (probably due to the low RAM available), and basically overall screwiness. So, after trying pretty much every option I could find on this community...and many others... (e.g. clean cache, clean old logs, already did a clean uninstall and install of SL, and much much more) I have reached my wits end. I would say that to date I've wasted a good solid 2 months with this.
     The clean install worked for MAYBE a month or so, but then it started acting up again with the fans (even without high pages in/out, CPU or memory usage) and excessive heat, along with the apps freezing and quitting (mind you it would be only two things open such as 1 word document and then firefox-- with flash disabeled). SOOOOOO long story short, I have purchased new RAM and I would like to try this once again, but to ensure I don't screw it up this time I would like some directions as to how to do the uninstall, partition, then reinstall. (currently to date I ensured all updates are completed---even though they are no longer released for SL, and I just did a full backup).
     Also, I need to first install Tiger (my original OS) as when I went to do a hardware test the other day this was not an option (and upon further research it is due to me not using Tiger as a first install and then using my mac box set for SL). I didn't use my original OS first because....one issue encountered when I had tried to install Tiger was that my Disc 2 (the applications one) took around 1.5 hrs to complete, but when I reached the last step of glory where I expected it to say COMPLETE it instead said that there was some sort of issue with the disc..........of course).
     Any help would be greatly appreciated.

1: If near a Apple Store or Authorized Repair, take it to then for a free evaluation, it might have other hardware problems now that it would be a waste of effort even continuing.
2: The RAM needs to be
Maximum Memory
3.0 GB (Actual) 2.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
Basically what this means is you can put in a 2GB module and a 1GB module for 3GB total.
I wouldn't proceed with installing RAM just yet, not until you get a stable OS X version on the machine, you might have a hard drive needing to be replaced as well which you can do while inserting new RAM.
3: This User Tip can assist in installing 10.6 Snow Leopard, partition format etc.
How to erase and install Snow Leopard 10.6
Software Update fully immediately after setup.
There is no need to install Tiger, he 10.6 disk contains the full 10.6 version, you can either install the iLife from Tiger disks or use Pacifist from Charlesoft to extract them and place on your new install, then Software update to get them current.
4: If not successful then the drive also likely needs to be replaced, if so choose a 7,200 RPM SATA I w/1.5Gb/s connection.
Install/upgrade RAM or storage drive in Mac's
Repeat #3
If your getting beeping noises or "you need to restart" issues, it's likely one or more of the RAM modules is bad. Have it exchanged or swapped.
I advise good quality RAM the first time, if you buy cheap stuff it's just going back.
Don't go any further than 10.6.8 with that old machine, the performance will be terrible.

How do i wirelessly install a cannon 5320 printer?

Similar Messages

Maybe you are looking for