How far is the range for wireless mighty mouse?

I've checked the specs, I've read the reviews. Haven't been able to find the range for mighty mouse.
I would like wireless mouse/keyboard use about 12 feet away from my Powerbook (using a flat panel tv from the sofa). The keyboard specs say 33 feet, but not sure about the mouse... Any guidance/suggestions?

I found a review that said it was about 30 feet
http://www.macworld.com/2006/08/reviews/btmightymouse/index.php

Similar Messages

How to find the Ranges for a field ?

Hello All,
 Can anyone tell me how to find the ranges for a field.
1, i.e say I want the Ranges Structure for the field LIFNR.
 The ranges structure for this is "RANGE_LIFNR".
 This I used in my Program since I know it previously.
 But now I want the ranges structure for the field VBELN (Delivery Document).
 I don't know what is it !!!!!
2, Is there any procedure to know the ranges structure for a particular field ?
Regards,
Deepu.K

Hi Deepu,
Using 'Where used list' you can able to find out RANGES tables.
For VEBLN range table is --> CRM_AC_ASSIGN_VBELN
If you using a program defined as shown below.
DATA: r_vbeln type ranges of vbeln.
The above statement also creates ranges structure in Runtime.
Procedure finding range table structures
go to SE37 -> Enter domain or dataelement value
Go to where used list --> search for 'Structures'
After getting all structure --> Click 'SEARCH' butoon in tool bar --> Search for 'RANGES' word
You can get all ranges tables in the search window
If helps plz reward points.
Regards
Bhupal Reddy

How far is the range...

how far can one stream iTunes to an Airport Express from an iMac (e.g., G4) with an internal Airport Extreme Card (Wireless Card Firmware Version: 404.2 (3.90.34.0.p16)). i can only go 20 to 30 feet from my computer. i'd like to stream through 3 rooms out to my backyard which is about 50-60 feet away. can additional airport expresses plugged into the wall function are bridges or signal boosters to get my stream outside? thanks JM
1.25 GHz iMac PowerPC G4 Mac OS X (10.4.6)

In the open an Airport can stream to approx 150 feet (however that is a theoretical maximum and I suspect at a longer range there would be dropouts).
You can use additional Airport Express units to extend the range by configuring a WDS network.
iFelix

How far is the range of the Airport Extreme and how much does it boost your Internet speed?

We have a D-link wireless router, and it's worked fine for us, and covers the area around our house easily, but we have lots of other property too, though. I was wondering, what is the range of the Airport Extreme? Besides that, I've seen some communities that say the Airport Extreme is much faster than other routers, but since we have 1 MB per second Internet speed, would that affect speed much? I also was thinking about getting it because we have a USB printer that we'd like to use with our macs, but it would have to be integrated to our network. Our current router has a USB port on the back, but to connect, you have to use Shareport utility, and even then, you can only connect 1 device at a time. It would be nice to be able to convert the USB signal to a network signal.

Hi - it is impossible to know what you are asking without knowing the model of the Dlink - this chart might help you compare - http://www.smallnetbuilder.com/lanwan/router-charts/view - as far as the printer is concerned, the USB port on the Extreme is designed for printers and hard drives - they are recognized when plugged in and seen on your computer so they can be installed - there is no extra utility involved - if you use a powered USB hub you can connect more than one device at a time - http://www.apple.com/airportextreme/features/printing.html - and I recommend that if you decide to try the Extreme that you know what the return policy is in case it doesn't work out in your situation.

Help: How to change the name of a Mighty Mouse (Bluetooth)

When I go into the Keyboard & Mouse preference and click on the Bluetooth, I can see the box for name and battery level for the mouse and keyboard. The problem is, those textboxes are not enabled. As the result, I cannot rename my bluetooth mouse. Can someone help me? Thanks.

With 10.4.8, the steps above works; I can rename my mouse now.

How to find out which bluetooth version is installed for wireless mighty m.

Hi all,
I just ordered the new Wireless Mighty Mouse. The specs. required Bluetooth V2.0. I tried to find out if my PB 17'' 1GHz (built in 2003) is supporting it, but the hardware information panel only gives the latest firmware version (1.7.5f10). I have no clue if this is V2 or not.
Any ideas on how to get more info?
Chris
Dual G5 1.8 GHz / PB 17" 1 GHz / AirPort Extreme Mac OS X (10.4.7)

Mark,
three things I can say already:
1) I set my PB into sleep mode. By klicking the mouse the PB went on immediately
2) when I physically switch off the mouse (PB states "lost connection") and back on again, I need to klick the mouse once to have the connection back. But this needs approx. 2 seconds until it works. Without klicking the mouse I don't know if the connection is reestablished on its own, after more than 30 sec. of waiting I gave up and klicked the mouse
3) if the PB is in sleep mode and the mouse is physically switched off, the minute I turn the mouse on again and klick its button once the PB turns back on
So far I couldn't see the mouse going into some kind of sleep mode (I wasn't so patient up to now).
Funny thing: the new laser seems to emit as I would guess infra-red light, at least it is not visible. So no more red shiny mouse in black night. And there is a small green led on the bottom side of the mouse a) flashing if it searches for a connection and b) indicating if the laser is on/off
Chris

"how to" question for wireless keyboard and/or wireless Mighty Mouse

I just purchased a wireless keyboard and a wireless Mighty Mouse (yesterday)
and notice I cannot use the calculator 'widget' in my Dock
1. the number keys on the new keyboard do not activate the corresponding numbers on the widget
and
2. the mouse does not activate the widget numbers when I click on them, either
does anyone know if the calculator can work with these 2 new accessories?
(if not, is there another, similar, calculator I can use now..?)
thank you for your time

Hello d:
The calculator works just fine with my Apple BT devices. I doubt if the problem is with the devices.
Try deleting the calculator widget from the dashboard (when dashboard is open). Then add it back.
Barry

How far will the extreme reach and how many users can be on there at the same time?

How far will the airport extreme reach and how many users can be on there at the same time?

Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
If you find that the signal does not reach as far as needed, you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

WRT54G Question on how far does the signal reach?

Question on how far does the signal reach?
Like from the system box at home base, could you take the laptop what distance from it? Miles? Or jus a short distance? And what distance if anyone knows?
Message Edited by White_Devil on 04-09-2008 08:21 PM
[b]Loved Charlton Heston[/b]

My 54G is at the far end of my house in my home office, 80+ feet away thru 4 walls I still get 25% signal, enough for a decent connection. Having an all wood construction house helps a bit. Once I was in my car out in the driveway (~90 ft) and it still worked OK.
I've got the bigger hi-gain antennas, not sure that they improve the range that much. I didn't really notice much signal gain going from the short ones to the tall ones.

How to extend the range with a second Airport Express? Do I need a DSL cable?

How to extend the range with a second Airport Express? Do I need a DSL cable?

Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance. But, wireless might work OK for you if you want to try that.
Let us know "how" you want to extend......wireless or wired?

How to extend the range of my Airport Extreme network by adding an Airport Express

How to extend the range of my Airport Extreme network by adding an Airport Express?

You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
The instructions that I will provide are for using AirPort Utility 6.0, which you have.
Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
Make sure that the wireless is turned on your Mac
Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
Click on the rectangle, and then click on the AirPort Express xxxxxx listing
AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that the Express be configured to "Extend" your wireless network.
Edit the Base Station name to your liking, then click Next in the lower right hand corner
Allow a full minute or two let AirPort Utility do its work
When you see Setup Complete, click Done at the lower right of the window.
Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
You should be in business.

How to change the color for HTML words in JEditorPane?

Hi Sir,
In the JTextPane , we could change the word's color by using:
Style style = doc.addStyle("test",null);
StyleConstants.setForeground(style, Color.red);
doc.setCharacterAttributes(10,20,syle,true);
we can change the text into red color,which range is from 10 to 30.
But how to change the color for HTML words in JEditorPane?

Hi,
you can use an AttributeSet to apply the foreground color. Let's say, doc is a HTMLDocument, then SimpleAttributeSet set = new SimpleAttributeSet();
doc.getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D"); would apply a color to a given AttributeSet. The AttributeSet with your color then can be applied to a selected range of text in a JEditorPane by /**
   * set the attributes for a given editor. If a range of
   * text is selected, the attributes are applied to the selection.
   * If nothing is selected, the input attributes of the given
   * editor are set thus applying the given attributes to future
   * inputs.
   * @param editor the editor pane to apply the attributes to
   * @param a the set of attributes to apply
public void applyAttributes(JEditorPane editor, AttributeSet a) {
    ((HTMLDocument) editor.getDocument()).getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D");
    editor.requestFocus();
    int start = editor.getSelectionStart();
    int end = editor.getSelectionEnd();
    if(end != start) {
      doc.setCharacterAttributes(start, end - start, a, false);
    else {
      MutableAttributeSet inputAttributes =
        ((SHTMLEditorKit) editor.getEditorKit()).getInputAttributes();
      inputAttributes.addAttributes(a);
} Ulrich

Is there any way to turn the low battery warnings off for my Mighty Mouse?

I noticed a pop-up warning on start-up when my battery life reached two bars for my new wireless Mighty Mouse. Also the battery sign kept on flashing in my menu bar.
I was wondering if there was a way of turning these warnings off, save uninstalling the Apple software, or should I just change batteries and not worry about getting as much use as I can out of my current pair.
I've also turned off "show bluetooth status in menu bar" in mouse preferences but it keeps on turning on at startup and it doesn't seem to get rid of the low battery indicator flashing on and off in the menu anyway.
(And would turning off system events as a login item disable the startup warning?).
Thanks
Paul

Hello Paul:
My own experience is that when the warning pops up (regardless of the yellow bars), you need to change the batteries. In my case I use rechargeable 2500 mAh batteries and an Energizer recharger that charges AA and AAA batteries in 15 minutes.
Barry

How far does the 10MB inclusive allowance go on th...

How far does the 10MB inclusive allowance go on the BTBBA deal?
For example how many web pages?
Why do upgrades always come with a downgrade
Solved!
Go to Solution.

NO WAY!
The answer is about 14 BT Forum web pages and there's no way that you could get 14 to download in just 20 minutes so the answer is 14 BT Forum web pages and about 6 hours
One page, 700KB!!! Come on BT. Please stop taking the mickey!!
Why do upgrades always come with a downgrade

How far is the range for wireless mighty mouse?

Similar Messages

Maybe you are looking for