How to achieve image using digital camera of USB-type interface through IMAQ PCI-1424 board.

1.Is it doable?
2.How to connect USB-type interface with IMAQ PCI-1424 board.
Thanks!

See the Developer's Zone (www.ni.com/zone) for specifics on USB (search for "USB").
"1.Is it doable?"
- In short "no".
- USB is similar to FireWire (IEEE 1394), and no framegrabber is required. We offer an IEEE 1394 IMAQ driver to interface FireWire cameras with LabVIEW & CVI.
"2.How to connect USB-type interface with IMAQ PCI-1424 board."
- You will need a USB driver for the camera. The 1424 is not required.

Similar Messages

How to get temperature from digital camera in to controller

how to get temperature from digital camera in polarising microscope using t95 controller without adc.dll

Ask the manufacturer of your camera…
What kind of answer do you expect?

Hello, i am new to the mac and i need to learn how to re image using an external hard drive

Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

How to resize image using java imageio

Hello ,
I want to know how to resize image using java imageio.
I dont want to use java awt because i am writing a web application.
help is very much needed
thank you.

Just use an AffineTransform !
Its much easier

How to get image using Http and how to save in Smulator

Hi guys,
Am working in black berry bold. i dont know how to get image using htp connection and one more thing i need to save this image in side simulator directory............. what are the specific API i should...
Guide me.........

If you want the input image size you need to pass it in as parameters.
A discussion thread on this topic is:
http://forums.adobe.com/thread/29948
-- Daniel R. <[email protected]> http://danielr.neophi.com/

How to measure RPM using digital I/O

Please tell me how to measure RPM using Digital Input or please give me a code for this.

You probably aren't going to find anyone to just give you code. Especially because you don't specify the hardware you're using. Doing this on FPGA is different than using DAQmx to do it. With FPGA you count pulses over a specified time. Using boolean logic from the digital DI node is a common way but there are others. (if you are using FPGA I can draw up an example, but I believe there is one on NIs website if you search google for it),. Then, if you want, you can run the data through an IIR filter, especially if you have a low resolution or slow moving encoder. Either of these conditions can result in very large difference of RPM even if the actual speed is not varying much (if you need an example why I can provide more detail, but some simple math calculating RPM should explain this. Obviously lower resolution will giv eyou less accurate results).
If you use DAQmx you can set up a frequency task and it will return the number of pulses in a specified time frame; then you can convert this to RPM based on your encoder resolution and take the same steps of running it through a filter to smooth it out if need be.
CLA, LabVIEW Versions 2010-2013

How to achieve polymorphisim using composition

How to achieve polymorphisim using composition

Not possible. This is very wrong, polymorphism is very much facilitated by Composition (or Aggregation).
Polymorphism goes hand in hand with
either imlementing an interface or extending a class.The fundamental objective of Polymorphism is the handling/using Objects of multiple types in a uniform manner, i.e. to a fixed contract.
Composition may be used to delegate the
implementation of an interface or subclass' method.Composition allows much more than delegation, it about defining a static contract between two objects.
composition itself is not polymorphic.The main difference between simple composition and polymorphism is the valence. In Polymorphism it is explicityly 1. .N in the case of composition it is implicitly 0..N
I think this code proves that a Composition of classes for Odd and Even can be used polymorphically.
public class Polymorphism {
abstract public class Base {
    public void method()
      System.out.println( this.getClass().getName() + ".method()" ) ;
public class Odd extends Base {
public class Even extends Base {
final int ARRAY_SIZE = 10;
Base[] composition = new Base[ARRAY_SIZE] ;
public Polymorphism() {
    for(int i = 0 ; i < ARRAY_SIZE ; i+=2 )
      composition[i] = new Even() ;
      composition[i+1] = new Odd() ;
public void process() {
    for(int i = 0 ; i < ARRAY_SIZE ; i++ ) {
      composition.method() ;
public static void main(String[] args) {
Polymorphism polymorphism = new Polymorphism();
polymorphism.process() ;

I want to add image in column is it possible then how to add image in data base what data type we need to do

I want to add image in column is it possible then how to add image in data base what data type we need to give we required any casting please show me one example
jitendra

Hi again,
Several points that can help more:
1. If you are working with Dot.Net, then I highly recommend read the first link that you got! This is nice and simple coding. Another option is this link which is even better in my opinion:
http://www.dotnetgallery.com/kb/resource21-How-to-store-and-retrieve-images-from-SQL-server-database-using-aspnet.aspx
2. As i mention above both link use the column's type image. There are several other option of working with Files. In most of my applications architecture I find that it is better to use a column which let us use any type of file and not an image column.
In choosing the right column's type for your needs basically your fist question should be if if you want to store your data inside relational database environment or outside relational environment. It is a good idea to look for blogs on this issue. Next
if you chose to store your data inside then you need to chose the right column type according to your server version. I highly recommend to look for blogs on the differences between those column's types: IMAGE,
Check those links:
To BLOB or Not To BLOB: Large Object Storage in a Database or a Filesystem
http://research.microsoft.com/apps/pubs/default.aspx?id=64525
FILESTREAM feature of SQL Server 2008
http://msdn.microsoft.com/library/hh461480
FileTables feature of SQL Server 2012
http://technet.microsoft.com/en-us/library/ff929144.aspx
Compare Options for Storing Blobs (SQL Server)
http://technet.microsoft.com/en-us/library/hh403405.aspx
Binary Large Object (Blob) Data (SQL Server)
http://technet.microsoft.com/en-us/library/bb895234.aspx
Managing BLOBs using SQL Server FileStream via EF and WCF streaming
* Very nice tutorial!
http://petermeinl.wordpress.com/2012/02/20/managing-blobs-using-sql-server-filestream-via-ef-and-wcf-streaming/
[Personal Site] [Blog] [Facebook]

How can I transfer images from digital camera without iPhoto?

The thing is that I wish to see my camera's card as an external storage device, as it happens when I connect it to my PC, so I can manually choose which to transfer and where.
But when I plug my camera it automatically opens iPhoto. At first,, this was fun, because I didn't even have to load any device drivers. But if you're using pro-camera equipment and manage and photoshop many images, like I do, an application like iPhoto isn't the way to do it.
Any feedback?
Thanks
Panos
iMac G5 Mac OS X (10.4.3)

Hi Panos,
I started using Image Capture to download all my images and Movie clips. I actually like doing it this way a lot better. My movie clips are downloaded into my Movies folder where I then put them in a dated folder.
My photos are downloaded into my Pictures folder, where I then put them in a dated folder. I import the dated folder into iPhoto. I also keep all dated folders from photo downloads in the Pictures folder till I get enough Movie folders and Photo folders to fill a DVD. I burn them and then delete them from the hard drive.
This way I have the photos in iPhoto and I also have just the photos backed up to DVD.
The Movies I keep on the hard drive in their dated folders until I use all the clips for my iMovie projects for the Year. I then make sure they are all burned to DVD, then I delete those from my hard drive.
Using Image Capture to download images and video clips:
Open up Image Capture which is found in the Applications folder.
When it is opened, go to Image Capture/Preferences
Under the General button choose
Camera: When a camera is connected, open Image Capture.
The next time you connect your camera Image Capture will open.
In the window that opens you will see an Options button. Click on that button to set your options.
To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
iPhoto: How to Change the "Open Automatically" Preference
If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.
Lori

Ok to grab still frames from video, or use digital camera?

Noob here. Just bought a Sony DCR-HC96 DV camcorder that I'm still playing around with.
Wondering how good the photo image quality is if I use the "Save Frame" commend to create jpeg images from imported video. Or, am I better off relying on my digital camera for still images (requiring me to carry/use two gadgets)

There's just one other thought:
A frame grab from an HD (hi-def) camcorder can look really good ..as in the 16:9 "widescreen" rhino, giraffe and zebra shots halfway down this page..
Click on those 16:9 photos to see larger versions.. (..the pics called "No pasaran!", "High, again!", "Camouflage", etc..)
Although the quality is not as good - as Kirk says - as a proper digital camera (..the other pics on that page were taken with an assortment of "proper" digital cameras..) there may be an occasional slight advantage to using an HD camcorder and then taking stills from the video: a camcorder generally has a longer zoom range than most digital stills cameras, so letting you get nice and close to the action.
So stills from a standard-def camcorder: no ..as Kirk says; awful.
Stills from an HD camcorder: can be fairly good..

Using digital camera as webcam

Well, it'd be nice to use my digital camera as a webcam under linux(I can do it under windows). The camera is a Nova DC-2L (finding info for it is a bitch). Well I'm wondering on how to get it working as a webcam under linux..
Under windows all I gotta do is set the cam to webcam mode on the camera then plug it in, and it's good to go from there..
Well I dunno what driver the camera uses as a webcam so I guessed qc-usb as it seemed to be the only one listed on the wiki page
sorta preEDIT: Ok as I was about to post the device info I seen that Zoran is what it came up as, so I looked it up and the module for it is zr36067, but when I try to modprobe it I get:
FATAL: Error inserting zr36067 (/lib/modules/2.6.9-ARCH/kernel/drivers/media/video/zr36067.ko): No such device
any ideas?
proc entry:
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0595 ProdID=4343 Rev= 1.00
S: Manufacturer=ZORAN
S: Product=DIGICAM
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

First of all, use udev. devfs is mostly useless if you want to use USB.
in udev rules, you need something like:
#camera
KERNEL="sda*" SYMLINK="camera%n"
KERNEL="video[0-9]" SYMLINK ="video%n"
I dont like a zillion groups, so I change my permissions,
sd*:root:users:660
#camera devices
camera*:root:users:0600
usb/dc2xx*:root:users:0600
usb/mdc800*:root:uesrs:0600
The problem with devfs prevented me from using my camera as a webcam and mounted storage device without restarting devfs and fiddling with the mounting of usbfs or whatever it was called.
cat /proc/bus/usb/devices
should tell you what is being seen on the bus.

How do I make the Digital Camera Raw update go away?

I have no idea what 'RAW' is, so this update is useless to me. But it won't go away, not even after I try to hide it. It won't hide! How can I fix this?

Just install it anyway. It's a tiny download and it's not worth stressing yourself over.
'RAW' in this case is referring to the raw image data from a Digital Camera's image sensor. Since each camera's sensor works differently, the RAW format differs for each camera, and support updates have to be released occasionally.
You may think you don't need this update, but it is not as pointless as you think.

How to achieve the fatest Digital IO write speed?

How fast can I write to a digital IO port?How to achieve the fatest write speed? For test purpose, after config port, using DIO Port write.vi in a whileLoop by 6024E board,repeatly write1-2(01 and 10bin), i can only get a speed about 10kHz,i.e. every 106 us write a byte, can that be faster? how? software solution and hardware solution? Thanks!

Hey Yfayne,
It is very hard to say how fast you can write the digital lines on an E-Series device, because it is completely software and computer dependent. The exact same DAQ device with the exact same code will execute completely different on a 233MHz machine when compared to a 2.4GHz machine, because it depends on how fast the computer can execute the loop. If your program slows down to perform another task like opening another program or surfing the web it will slow the rate the computer can execute the loop and mess up the timing.
In addition, the digital lines on the E-Series use the DAQ-STC chip that was never designed for high speed. If you need a high speed hardware time device I would suggest using the PCI-6533 or PCI-6534. The devices were desig
ned for high speed digital applications and can easily exceed the 10 kHz rate consistently.
Here are a few links that you will find useful.
http://zone.ni.com/devzone/conceptd.nsf/webmain/467ed254f3a30b1286256a6f00720951
http://sine.ni.com/apps/we/nioc.vp?cid=1104〈=US
I hope this helps out.
Joshua P.
Application Engineering
National Instruments

Reliable images using 1394 cameras?

WinXp. Labveiw 7.0. 1394 (1.5 driver).
Labview exampe: Low Level Grab for 1394.
Basler A601f camera. Problem: Horizontal frame fragmenting is easily visible when there is motion in the image.
We tried using the occurance function to over come this. No improvement.
Question 1: How to fix Labveiw example code to get reliable images of moving objects using 1394 cameras?

Hello larryb.
Thanks for contacting us. I'm not exactly sure what you mean by 'horizontal frame fragmenting,' so I will speculate that it just means that your images are skewing in some fashion when there is motion in your image.
Are you seeing this behavior when you do a grab acquisition in Measurement and Automation Explorer (MAX)? If so, what is the frame rate of your camera?
Depending on whether you see the behavior in MAX or not, we may or may not be able to do anything to the LabVIEW code to fix the issue. Take a look at your processor usage when you run the example as well to see if maybe it has anything to do with that.
Again, if you can clarify 'horizontal frame fragmenting' a little bit, as well as if you see the issue in MAX, then we can go fro
m there!
Regards,
Colin C.
Applications Engineering
Colin Christofferson
Community Web Marketing
Blog

IPod to TV using digital camera cable, doesn't work. Help

Hey
I've got the iPod 5th Generation 30Gb video. I ripped one of my DVDs onto my computer and then used videora to convert the DVD for use on the ipod. I used iTunes to stick the movie on my iPod.
The movie plays fine on the ipod, but when I go to connect the iPod to my LG Flatron TV it doesn't work. I am using a cable that came with my digital camera, it only has one black and one yellow rca plug. If I use it with the camera, the black is for video, and the yellow for audio. But on the ipod, I don't get anything. I have checked that the send to TV settings are On.
I've tried changing the format on the output from PAL to NTSC, nothing.
One thing I am not sure about is why my cable has got a little box thingy surrounding part of the wire, inside the box thingy are magnets, anyone know why these are here? Could this be what is causing it not to work. What should I do?
Thanks

Here is some info for the pinout for the iPod.
http://www.anythingbutipod.com/archives/2006/04/zen-vision-m-video-cable-other-4 pole-35mm-pinouts.php
You need to find the pinout of the camera cable you have.
Probably be easier to get get an AV cable with a 3.5mm plug to (whatever fits into your TV) cable.
Usually, you simply have to swap the Red and the Yellow for it to work properly.

How to achieve image using digital camera of USB-type interface through IMAQ PCI-1424 board.

Similar Messages

Maybe you are looking for