How to by-pass: MIRO: material is still under quality inspection

All SAP Gurus,
At the time of posting the MIRO, system giving an error message as 'material is still under quality inspection'.
We want to by-pass this message and post the MIRO.
Regards,

Hi,
Thanks for reply.
We have already taken the UD, and cleared the lots.
Still the system giving the message as 'material is still under quality inspection'.
So, we want to by-pass this message and post the MIRO.
What settings are required for this?
Please help...........
Regards,

Similar Messages

HT4623 My iPhone 4S speaker suddently doesn't work properly from one week ago? How I can do? 4s is still under warranty?

My iPhone 4S speaker suddently doesn't work properly from one week ago? How I can do? 4s is still under warranty?

Have you tried any troubleshooting steps, like resetting you iPhone, for example? Or restoring it?
If not by all means do so because your problem could be caused by software glitches that could be solved resetting or restoring.
Warranty is for one year from date of purchase and two years if you bought Apple Care at the time of purchase. If your iPhone has a hardware issue within warranty, it would be replaced by Apple. If it is already out of warranty, you might be eligible for an out of warranty replacement where you pay a much lower amount but this varies according to the country and currency, so it is better to check with Apple or with an authorized reseller.
You could check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Invoice payment blocked for material is under quality inspection

hi,
how to prevent invoice being processed (MIRO) when the materials are booked in quality inspection stock, Is this possible without the help of QM.
thanks

Hi,
Go to material master , check the QM View active.
If QM View is active , go to this view and change the QM control Key as 000 and remove the tick mark for QM Proc active Field.
Regards,
Andra

Raw Material to go to quality inspection upon GR

Hai all
I am having a raw material which is recieved from external Vendor. Upon making GR against Purchase order this material has to go to quality inspection with automatic inspection lot creation. What settings i need to do in customization and in the material master of the material . I am new to QM module. Thanks in advance.

hi
for inspection of raw material u require 01 inspection type.
conf. setting:
Quality Management>Quality Inspection>Inspection Lot Creation>Maintain Inspection Types> maintain setting for 01 inspection type Goods receipt insp. for purchase order
material master settings:
in material master create quality view,inspecton setup - maintain 01 inspection type(mark post to inspection).
if u want to inspect material using inspection plan set' insp. with task list' (make sure that u maintain inspection plan).
please rvert if u have any query

How value with few decimals will be enabled for quality inspection records?

Hi ,
my client requirement is in such a way that i need to record the quality parameter( quantitative results) like 3.12 in qa32 transaction. how do i enable the respective MIC settings for the same, kindly suggest me
regards
archu

In QS23 transaction --> Select Button Quant.data -->Maintain Decimal places.
All new inspection lots will allow you to maintain decimal places.
If Inspection lot is already Released, Go to QA02 and reset the sample, Re-assign the inspection plan.

Material Under Quality - Block for invoice/payment

Dear all,
When the material is lying under quality inspection the user should not be able to do invoice posting or posting.By standard its allowing once GR is done.How to do this
Regards,
Milton.I

Dear Vijay,
There was similar requirement from my client for the same. At that time contacted the OSS.
The message no.280 is there but you can not configure it.
Not allowing to post the external document like Invoice as it comes leads to so much descripency in real time.
The best solution what SAP has given is in QM control key just tick the Invoice and when the invoice of that perticular material comes for posting you can post but that will be blocked for the payment if the material is not cleared from the Quality.
As the material cleared from Quality, you can release the Invoices and if the material is rejected can raise the credit memo.
This is what we did after consulting the OSS
Thanks And Regards,
Krishna Reddy

How we may by pass quality inspection during PO creation

Hi Guru,
How we may by pass quality inspection via selecting document type in the PO. User create dummy PO in multi level marketing indsutry in order to achieve points & awards during month end. Since all the materials subject to quality inspection, material in dummy PO also falls under quality inspection. For your kind information there is no physical movement or GR for this dummy PO. It's just created in the system as I mentioned the purpose the above. I already created seperate document type to diffrentiate this scenario but looking forward how we may by pass quality inspection for this document type. Or is that any t/code which can by pass quality inspection during PO creation. Please advice. Thank you.
rgds,
nantha

Dear Netto,
As I said before user need to create dummy PO & must do GR in order to get the rewards & bonuses. User do GR in the system but it doesn't involve material movement. My question is how we may by pass the quality inspection for said GR since physically no goods involved.
Dear JS,
For your kind information this material subject to quality inspection & it has been set in material master. I tried one more as per your advice. System post this GR to quality inspection eventhough I change to unrestricted use in PO & GR as well before posting maid. Quality Inspection is auto defaulted for said material. Quality inspection is requirement to most of the goods so I can't change that. I'm wondering how we may by pass this just for dummy PO & GR.
I believe this clarifies your queries. Thank you.
rgds,
nantha

How many TO need to create for Quality inspection material

Dear all,
When we do GR's ,TR is created & material is goes for quality inspection .
So after UD, PCN is created so for this PCN we need to Create & Confirm TO.
So my question is what we do for open TR which was created after GR posting.
DO we have to create TO for this TR.
I mean how TO get's created in this process?
Please help me out.
Regards,
Rock

what do you do physically?
a) do you keep the stock in goods receipt area until it is released from the Q status
b) or do you putaway that stock into its destination bins before it is released from Q-status
in both cases you use the TR that was automatically created during goods receipt to create the TO.
in case a) you just execute LU04 to process the posting change notice to change the stock status from Q to unrestricted prior to creation of the TO.
in case b) you create the TO directly and process the PCN in LU04 later when the usage decision was made.
part B can create some difficulties (especially if you setup automatic processing) as you may get several quants because the material need more than one destination bin, while you just have 1 quant in the GR area 902. So SAP may not be able to determine the quant that needs to be released from Q status by itself, and user has to select those quants manually.

How to Clear Stock From Quality Inspection

Dear Sir,
We have following problem scenario :
In the Quality View the wrong type of Inspection Type was given and subsequently during MIGO as the "Quality Inspection" option was selected under Stock Type , so after MIGO stock got posted under Quality Inspection and no Inspection Lot was created .
Now we want to clear the Stock from QI to either Un-restricted or any other type , so that material can be cleared and brought to Un-restricted Stock ultimately .
We tried to use MB1b with movement type 321 , but it given error as "Change the inspection stock of material CJMC1A0477 in QM only" .
I request you to kindly guide me as how can the Stock be cleared from QI .
With Thanks and Regards
B Mittal

Hi ALL,
I'm also facing the same issue. In material master QM view : Q M Procurement activity deactivated and Inspection setup also deactivated. This is not a proper way to solve the issue anyway i have deactivated, but still i am facing same issue.
Please anybody can help on this...
Regards
Chandru.

More Quantity of Raw Material noticed in Quality Inspection

Dear Experts,
We have done GR against the PO for a material. But in Quality Inspection, we have noticed that there is excess quantity of stock received which is more than the inspection lot quantity.
My issue is that inspection lot quantity will be created for the same quantity for which GR has been done.
I can not post more quantity than the inspection lot quantity. So how to post the excess quantity into stock?
Please suggest.
Regards,
Phani

Dear Sujit,
Thanks For the quick reply.
While performing the same, as suggested by you, I am getting the error
PU Ordered quantity exceeded by 300 M : MPXSXWRT 1100 1104 1000009071
Message no. M7022
Diagnosis
The specified stock level or quantity is exceeded by 300 M.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity
But, I have already maintained in OMCQ transaction for Message 022, Application area M7 as u201CWu201D.
But still the system is giving an error message.
Hi Kent9999,
I didnu2019t understand how QP02 will help me.
Regards,
Phani

Posting Block in Quality Inspection Material

I have one requirement in QM Module as my client wants to Block the payment for the Materials which are under Quality Inspection as there are several materials got paid without Quality Clearance.
I have changed Control key 0007 - Invoice Block, Message Code- Warning.
Can there be any setting which will throw the message that material is under Inspection.
Please advice on SOS basis.
Rgds,
Pradeep

Thanks for reply but my client wants to <b>Block the payment for the Materials</b> which are <b>under Quality Inspection</b> as there are several materials got paid without Quality Clearance.
I have changed Control key 0007 - Invoice Block, Message Code- Warning.
Can there be any setting which will throw the message that material is under Inspection.

Sample still showing in quality inspection stock after usage decision completed

After process order completed, we have received 100 units as a quality inspection stock. After usage decision,( QA11), I have posted 98 units to unrestricted use and 2 units to the to sample usage
98 units successfully move to unrestricted stock.
However 2 units for sample still showing quality inspection stock.
I have checked MB51, mat document number for sample is 4900000160 and movement type is 331
Do you have any idea why sample still showing in quality inspection stock. It should consumed and zero out the quality inspection stock in MMBE

Hi,
Please check you MIC's control Indicators.
Is it tick on Destructive insp. under Sample tab ?
Please tick it and try again with whole process.
Destructive Insp. : You specify whether the sample is to be destroyed after inspection. This means that is no longer available. This quantity is used in the usage decision as the proposed quantity for the posting to sample.

How to pass MIRO for imported material

Dear all
HI
i want to make a miro for imported material
all the custom,cvd,cess,frw charges etc were alredy paid by clearing agent
i want to pass miro for that agent
material supplier vendor is diffrent one i want to pass miro for it also
ple tell me the procedure for MIRO
thanks
prakash

Dear Prakash,
While Creating Import PO, u have to maintain the Condition for clearing agent. Go for the Item detail -> condition tab,select condition one by one for which u want to pay amount to clearing agent like condition custom,cvd,cess,Freight,etc, go for detail icon and maintain the vendor (Clearing agent) .
After Receipt of goods,while making Miro, for Clearing agent ,select Planned delivery cost at right side and select Purchase order no.it shows all the condition amount for clearing agent.clear the amount by posting MIRO.
and for main vendor make the Miro by normal process ,it shows only basic amount and condition amont for which u did not maintain vendor(Clearing agent) at condition detail tab.
This is the right process,I was allready work by this way.
Rewards.....
Regards
Sanjay L

How do I pass single quotes into a string variable?

Thanks for any help?
Example
Select xdat, yday
from foo
where
xdat = to_char(sysdate, 'mm/dd/yyyy')
How do I pass the single quoted stuff above into a string variable?

Thank you but that is not the same thing. I am building a dynamic sql statement and need to pass the quoted material into a statement that is quoted Is that not what my example above shows?
My example above has a quoted string inside a string. I think this is exactly what you were asking for.

How do I pass a default parameter to a CR XI report in VB6?

Hi,
How do I pass a default parameter to a CR XI report in VB6?
For example I have a parameter list of years from 2000 to 2020 and I want to pass on the result of str(Year(Now)) so that the user automatically sees the current calendar year as his/her default option - but can choose another year from the drop down list - if wished.
"AddDefaultValue" seems to have no effect at all (probably because the current year already exists in the parameter list)
"AddCurrentValue" removes the parameter altogether and the report defaults to the current year.
Any suggestions?
Thanks in advance!
Peter Tyler

Hi Mark, thanks for your quick response.
>>You might find it easier to do the dropdowns and calendar selections on the VB6 side and just pass the record selection to the report >>
This is what I am doing but I cannot get the current year to appear as the default in the drop down parameter list also it appears I cannot clear the existing report parameter fields.
This is my code:
'clear the existing parameter list of the Year parameter
MsgBox CrRep.ParameterFields.GetItemByName("Year").NumberOfDefaultValues
This gives me the total number of existing parameters in the CRXI report
CrRep.ParameterFields.GetItemByName("Year").ClearCurrentValueAndRange
MsgBox CrRep.ParameterFields.GetItemByName("Year").NumberOfDefaultValues
This gives me the new number of existing parameters in the CRXI report which is exactly the same as before so .ClearCurrentValueAndRange seems to have no effect
'now add the new default parameter to the list
CrRep.ParameterFields.GetItemByName("Year").AddDefaultValue (Str(Year(Now)))
CrRep.ParameterFields.GetItemByName("Year").AddDefaultValue (varUnderline)
'now generate and add the required parameter fields
Dim varParameterYear As String
varParameterYear = "2003"
Do While Not varParameterYear = "2031"
CrRep.ParameterFields.GetItemByName("Year").AddDefaultValue (varParameterYear)
varParameterYear = varParameterYear + 1
Loop
The result of the above as that the intially declared parameter (Str(Year(Now)))
- which is "2009" - now appears at the top of the generated parameter list but is not the default parameter and the user still has to drop down the list box to choose the year.
Any advice on both these issues would really help !
Peter Tyler
Edited by: Peter Tyler on Feb 27, 2009 11:19 AM

How to by-pass: MIRO: material is still under quality inspection

Similar Messages

Maybe you are looking for